From: Antoniu Miclaus <antoniu.miclaus@analog.com>
To: Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Antoniu Miclaus <antoniu.miclaus@analog.com>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: [PATCH 0/1] dt-bindings: switch: add ADG1712 SPST switch binding
Date: Fri, 28 Nov 2025 16:46:12 +0200 [thread overview]
Message-ID: <20251128144627.24910-1-antoniu.miclaus@analog.com> (raw)
This series adds devicetree bindings documentation for the Analog Devices
ADG1712 quad SPST switch. The ADG1712 contains four independent single-pole,
single-throw (SPST) switches, each controlled by a dedicated GPIO pin.
While the device uses the existing gpio-mux driver infrastructure, a
dedicated binding document provides clear documentation on how to properly
represent the ADG1712 in devicetree, following the pattern of one
mux-controller node per independent switch.
Antoniu Miclaus (1):
dt-bindings: switch: adg1712: add ADG1712 SPST switch binding
.../bindings/switch/adi,adg1712.yaml | 63 +++++++++++++++++++
1 file changed, 63 insertions(+)
create mode 100644 Documentation/devicetree/bindings/switch/adi,adg1712.yaml
--
2.43.0
next reply other threads:[~2025-11-28 14:50 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-11-28 14:46 Antoniu Miclaus [this message]
2025-11-28 14:46 ` [PATCH 1/1] dt-bindings: switch: adg1712: add ADG1712 SPST switch binding Antoniu Miclaus
2025-11-28 16:19 ` Rob Herring (Arm)
2025-11-28 18:53 ` Conor Dooley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251128144627.24910-1-antoniu.miclaus@analog.com \
--to=antoniu.miclaus@analog.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox