[PATCH V3 0/3] Add device tree support for NVIDIA Tegra CMDQV

[Ashish Mhetre <amhetre@nvidia.com>]

This series adds device tree support for the CMDQ-Virtualization (CMDQV)
hardware on NVIDIA Tegra264 SoCs.

CMDQV is a hardware block that works alongside the ARM SMMUv3 to assist in
virtualizing the command queue. It was previously only supported through
ACPI on Tegra241. This series extends the existing driver to support device
tree based initialization, which is required for Tegra264 platforms.

The series is structured as follows:

Patch 1: Extends the tegra241-cmdqv driver to support device tree probing
         alongside the existing ACPI support. The SMMU driver now parses
         the nvidia,cmdqv phandle to associate each SMMU with its
         corresponding CMDQV instance.

Patch 2: Adds device tree binding documentation for nvidia,tegra264-cmdqv
         and extends the arm,smmu-v3 binding with an optional nvidia,cmdqv
         property.

Patch 3: Adds CMDQV device nodes to the Tegra264 device tree and enables
         them on the tegra264-p3834 platform.

The implementation follows the existing ACPI probe path to minimize code
divergence and maintain consistency with Tegra241 support.

Changes in V3:
- Remove the Kconfig dependency for CONFIG_TEGRA241_CMDQV
- Drop the reference on the platform device after getting it from
  of_find_device_by_node()
- Remove the unnecessary "nvidia,tegra264-smmu" compatible string from
  arm-smmu-v3 match table
- Order CMDQV nodes in device tree files according to its address

Changes in V2:
- Updated dependency for CONFIG_TEGRA241_CMDQV on OF || ACPI
- Changed maintainer to Nicolin Chen
- Removed interrupt-names property
- Added nvidia,tegra264-smmu to compatible enum for arm-smmu-v3
- Added allOf constraint to restrict nvidia,cmdqv property to
  nvidia,tegra264-smmu only
- Updated SMMU nodes in device tree to use nvidia,tegra264-smmu compatible
  string

Ashish Mhetre (3):
  iommu/arm-smmu-v3: Add device-tree support for CMDQV driver
  dt-bindings: iommu: Add NVIDIA Tegra CMDQV support
  arm64: dts: nvidia: Add nodes for CMDQV

 .../bindings/iommu/arm,smmu-v3.yaml           | 30 +++++++++-
 .../bindings/iommu/nvidia,tegra264-cmdqv.yaml | 42 ++++++++++++++
 .../arm64/boot/dts/nvidia/tegra264-p3834.dtsi |  8 +++
 arch/arm64/boot/dts/nvidia/tegra264.dtsi      | 55 +++++++++++++++++--
 drivers/iommu/arm/Kconfig                     |  1 -
 drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c   | 32 +++++++++++
 .../iommu/arm/arm-smmu-v3/tegra241-cmdqv.c    | 43 ++++++++++++++-
 7 files changed, 202 insertions(+), 9 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/iommu/nvidia,tegra264-cmdqv.yaml

-- 
2.25.1