From: Marco Felsch <m.felsch@pengutronix.de>
To: Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>, Peng Fan <peng.fan@nxp.com>,
Liu Ying <victor.liu@nxp.com>,
Andrzej Hajda <andrzej.hajda@intel.com>,
Neil Armstrong <neil.armstrong@linaro.org>,
Robert Foss <rfoss@kernel.org>,
Laurent Pinchart <Laurent.pinchart@ideasonboard.com>,
Jonas Karlman <jonas@kwiboo.se>,
Jernej Skrabec <jernej.skrabec@gmail.com>,
Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
Maxime Ripard <mripard@kernel.org>,
Thomas Zimmermann <tzimmermann@suse.de>,
David Airlie <airlied@gmail.com>,
Simona Vetter <simona@ffwll.ch>
Cc: devicetree@vger.kernel.org, imx@lists.linux.dev,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
kernel@pengutronix.de, Marco Felsch <m.felsch@pengutronix.de>
Subject: [PATCH v7 1/3] dt-bindings: soc: imx93-media-blk-ctrl: Add PDFC subnode to schema and example
Date: Tue, 02 Dec 2025 14:32:58 +0100 [thread overview]
Message-ID: <20251202-v6-18-topic-imx93-parallel-display-v7-1-2cce31d64608@pengutronix.de> (raw)
In-Reply-To: <20251202-v6-18-topic-imx93-parallel-display-v7-0-2cce31d64608@pengutronix.de>
From: Liu Ying <victor.liu@nxp.com>
i.MX93 SoC mediamix blk-ctrl contains one DISPLAY_MUX register which
configures parallel display format by using the "PARALLEL_DISP_FORMAT"
field. Document the Parallel Display Format Configuration(PDFC) subnode
and add the subnode to example.
Signed-off-by: Liu Ying <victor.liu@nxp.com>
[m.felsch@pengutronix.de: port to v6.18-rc1]
[m.felsch@pengutronix.de: add bus-width]
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
---
.../bindings/soc/imx/fsl,imx93-media-blk-ctrl.yaml | 92 ++++++++++++++++++++++
1 file changed, 92 insertions(+)
diff --git a/Documentation/devicetree/bindings/soc/imx/fsl,imx93-media-blk-ctrl.yaml b/Documentation/devicetree/bindings/soc/imx/fsl,imx93-media-blk-ctrl.yaml
index 34aea58094e55365a2f9c86092f637e533f954ff..6e2d86d9341c75108b492bcbabc8a560d8e707cd 100644
--- a/Documentation/devicetree/bindings/soc/imx/fsl,imx93-media-blk-ctrl.yaml
+++ b/Documentation/devicetree/bindings/soc/imx/fsl,imx93-media-blk-ctrl.yaml
@@ -26,6 +26,12 @@ properties:
reg:
maxItems: 1
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 1
+
'#power-domain-cells':
const: 1
@@ -40,6 +46,60 @@ properties:
minItems: 8
maxItems: 10
+ bridge@60:
+ type: object
+ additionalProperties: false
+
+ properties:
+ compatible:
+ const: nxp,imx93-pdfc
+
+ reg:
+ maxItems: 1
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: Input port node to receive pixel data.
+
+ port@1:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description: Output port node to downstream pixel data receivers.
+
+ properties:
+ endpoint:
+ $ref: /schemas/graph.yaml#/$defs/endpoint-base
+ unevaluatedProperties: false
+
+ properties:
+ bus-width:
+ enum: [ 16, 18, 24 ]
+ description:
+ Specify the physical parallel bus width.
+
+ This property is optional if the display bus-width
+ matches the SoC bus-width, e.g. a 18-bit RGB666 (display)
+ is connected and all 18-bit data lanes are muxed to the
+ parallel-output pads.
+
+ This property must be set to 18 to cut only the LSBs
+ instead of the MSBs in case a 24-bit RGB888 display is
+ connected and only the lower 18-bit data lanes are muxed
+ to the parallel-output pads.
+
+ required:
+ - port@0
+ - port@1
+
+ required:
+ - compatible
+ - reg
+ - ports
+
allOf:
- if:
properties:
@@ -81,9 +141,12 @@ allOf:
- const: isi
- const: csi
- const: dsi
+
required:
- compatible
- reg
+ - '#address-cells'
+ - '#size-cells'
- power-domains
- clocks
- clock-names
@@ -112,4 +175,33 @@ examples:
clock-names = "apb", "axi", "nic", "disp", "cam",
"pxp", "lcdif", "isi", "csi", "dsi";
#power-domain-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ bridge@60 {
+ compatible = "nxp,imx93-pdfc";
+ reg = <0x60 0x4>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ pdfc_from_lcdif: endpoint {
+ remote-endpoint = <&lcdif_to_pdfc>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ pdfc_to_panel: endpoint {
+ remote-endpoint = <&panel_from_pdfc>;
+ bus-width = <18>;
+ };
+ };
+ };
+ };
};
--
2.47.3
next prev parent reply other threads:[~2025-12-02 13:33 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-12-02 13:32 [PATCH v7 0/3] Add i.MX91/93 parallel display support Marco Felsch
2025-12-02 13:32 ` Marco Felsch [this message]
2025-12-08 1:28 ` [PATCH v7 1/3] dt-bindings: soc: imx93-media-blk-ctrl: Add PDFC subnode to schema and example Rob Herring
2025-12-15 16:05 ` Marco Felsch
2025-12-08 6:14 ` Liu Ying
2025-12-15 16:17 ` Marco Felsch
2025-12-02 13:32 ` [PATCH v7 2/3] drm/bridge: imx: Add i.MX93 parallel display format configuration support Marco Felsch
2025-12-08 6:57 ` Liu Ying
2025-12-15 16:47 ` Marco Felsch
2025-12-02 13:33 ` [PATCH v7 3/3] arm64: dts: imx93: Add parallel display output nodes Marco Felsch
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251202-v6-18-topic-imx93-parallel-display-v7-1-2cce31d64608@pengutronix.de \
--to=m.felsch@pengutronix.de \
--cc=Laurent.pinchart@ideasonboard.com \
--cc=airlied@gmail.com \
--cc=andrzej.hajda@intel.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=festevam@gmail.com \
--cc=imx@lists.linux.dev \
--cc=jernej.skrabec@gmail.com \
--cc=jonas@kwiboo.se \
--cc=kernel@pengutronix.de \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=maarten.lankhorst@linux.intel.com \
--cc=mripard@kernel.org \
--cc=neil.armstrong@linaro.org \
--cc=peng.fan@nxp.com \
--cc=rfoss@kernel.org \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=simona@ffwll.ch \
--cc=tzimmermann@suse.de \
--cc=victor.liu@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).