[RESEND PATCH 0/3] Add Belling EEPROMs found in Radxa boards

[RESEND PATCH 0/3] Add Belling EEPROMs found in Radxa boards

[FUKAUMI Naoki]

This patch series adds Belling BL24C04A, BL24C16A, and BL24C16F EEPROM
found in Radxa boards.

FUKAUMI Naoki (3):
  dt-bindings: eeprom: at24: Add compatible for Belling
    BL24C04A/BL24C16F
  arm64: dts: rockchip: Add EEPROMs for Radxa ROCK 4 boards
  arm64: dts: rockchip: Add EEPROMs for Radxa boards

 Documentation/devicetree/bindings/eeprom/at24.yaml |  2 ++
 .../boot/dts/rockchip/rk3399-rock-4c-plus.dts      |  8 ++++++++
 arch/arm64/boot/dts/rockchip/rk3399-rock-4se.dts   | 12 ++++++++++++
 arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi |  8 ++++++++
 .../arm64/boot/dts/rockchip/rk3568-radxa-cm3i.dtsi | 10 +++++++++-
 arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts    |  8 ++++++++
 arch/arm64/boot/dts/rockchip/rk3568-rock-3b.dts    |  8 ++++++++
 arch/arm64/boot/dts/rockchip/rk3576-rock-4d.dts    | 14 ++++++++++++++
 .../boot/dts/rockchip/rk3588-rock-5b-plus.dts      | 10 ++++++++++
 arch/arm64/boot/dts/rockchip/rk3588-rock-5t.dts    | 10 ++++++++++
 10 files changed, 89 insertions(+), 1 deletion(-)

-- 
2.43.0

[RESEND PATCH 1/3] dt-bindings: eeprom: at24: Add compatible for Belling BL24C04A/BL24C16F

[FUKAUMI Naoki]

Add the compatible for Belling BL24C04A 4Kb EEPROM and BL24C16F 16Kb
EEPROM.

Signed-off-by: FUKAUMI Naoki <naoki@radxa.com>
---
 Documentation/devicetree/bindings/eeprom/at24.yaml | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/eeprom/at24.yaml b/Documentation/devicetree/bindings/eeprom/at24.yaml
index c21282634780..8f16fa2ba17a 100644
--- a/Documentation/devicetree/bindings/eeprom/at24.yaml
+++ b/Documentation/devicetree/bindings/eeprom/at24.yaml
@@ -116,6 +116,7 @@ properties:
           - const: atmel,24c02
       - items:
           - enum:
+              - belling,bl24c04a
               - giantec,gt24c04a
               - onnn,cat24c04
               - onnn,cat24c05
@@ -124,6 +125,7 @@ properties:
       - items:
           - enum:
               - belling,bl24c16a
+              - belling,bl24c16f
               - renesas,r1ex24016
           - const: atmel,24c16
       - items:
-- 
2.43.0

[RESEND PATCH 2/3] arm64: dts: rockchip: Add EEPROMs for Radxa ROCK 4 boards

[FUKAUMI Naoki]

The BL24C04A EEPROM is found in the schematics for Radxa ROCK Pi 4A+
and 4B+. [1] [2]

The BL24C16A EEPROM is found in the schematics for Radxa ROCK 4C+, 4SE,
Radxa ROCK Pi 4A, 4B, and 4C. [3] [4] [5] [6] [7]

However, newer boards/batches should have the BL24C16A, but older ones
may have the BL24C04A. (the ROCK Pi 4B+ I own has a 16Kb EEPROM)

For the ROCK Pi 4s (except the relatively new ROCK 4SE), add the
BL24C04A eeprom node for backward compatibility.
For the ROCK 4SE, add the BL24C16A eeprom node.

These are designed to have data written during factory programming
(regardless of whether data is actually written or not), and we at
Radxa permit users to read the data but not write to it. [8]
Therefore, we will add a read-only property to the eeprom node.

[1] https://dl.radxa.com/rockpi4/docs/hw/rockpi4/4ap/radxa_rock_4ap_v1730_schematic.pdf p.17
[2] https://dl.radxa.com/rockpi4/docs/hw/rockpi4/4bp/radxa_rock_4bp_v1730_schematic.pdf p.17
[3] https://dl.radxa.com/rockpi4/docs/hw/rockpi4/ROCK-4C+-V1.411-SCH.pdf p.22
[4] https://dl.radxa.com/rockpi4/docs/hw/rockpi4/ROCK-4-SE-V1.53-SCH.pdf p.17
[5] https://dl.radxa.com/rockpi4/docs/hw/rockpi4/4a/ROCK_4A_V1.52_SCH.pdf p.17
[6] https://dl.radxa.com/rockpi4/docs/hw/rockpi4/4b/ROCK_4B_v1.52_SCH.pdf p.17
[7] https://dl.radxa.com/rockpi4/docs/hw/rockpi4/rockpi4c_v12_sch_20200620.pdf p.17
[8] https://github.com/radxa/u-boot/blob/next-dev-v2024.10/drivers/misc/radxa-i2c-eeprom.c

Signed-off-by: FUKAUMI Naoki <naoki@radxa.com>
---
 arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts |  8 ++++++++
 arch/arm64/boot/dts/rockchip/rk3399-rock-4se.dts     | 12 ++++++++++++
 arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi   |  8 ++++++++
 3 files changed, 28 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts
index 74160cf89188..f95fd92d58ba 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts
@@ -453,6 +453,14 @@ regulator-state-mem {
 			regulator-off-in-suspend;
 		};
 	};
+
+	eeprom@50 {
+		compatible = "belling,bl24c04a", "atmel,24c04";
+		reg = <0x50>;
+		pagesize = <16>;
+		read-only;
+		vcc-supply = <&vcc_3v0_s0>;
+	};
 };
 
 &i2c3 {
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-4se.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock-4se.dts
index a8b8d4acc337..c0b931b3c640 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-rock-4se.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-4se.dts
@@ -8,6 +8,8 @@
 #include "rk3399-t.dtsi"
 #include "rk3399-rock-pi-4.dtsi"
 
+/delete-node/ &eeprom;
+
 / {
 	model = "Radxa ROCK 4SE";
 	compatible = "radxa,rock-4se", "rockchip,rk3399";
@@ -17,6 +19,16 @@ aliases {
 	};
 };
 
+&i2c0 {
+	eeprom@50 {
+		compatible = "belling,bl24c16a", "atmel,24c16";
+		reg = <0x50>;
+		pagesize = <16>;
+		read-only;
+		vcc-supply = <&vcc_3v0>;
+	};
+};
+
 &sdio0 {
 	status = "okay";
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
index 046dbe329017..a8ab043e4062 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
@@ -456,6 +456,14 @@ regulator-state-mem {
 			regulator-off-in-suspend;
 		};
 	};
+
+	eeprom: eeprom@50 {
+		compatible = "belling,bl24c04a", "atmel,24c04";
+		reg = <0x50>;
+		pagesize = <16>;
+		read-only;
+		vcc-supply = <&vcc_3v0>;
+	};
 };
 
 &i2c1 {
-- 
2.43.0

[RESEND PATCH 3/3] arm64: dts: rockchip: Add EEPROMs for Radxa boards

[FUKAUMI Naoki]

The BL24C16A EEPROM is found in the schematics for Radxa CM3I, Radxa
ROCK 3A, 3B, 5B+, and 5T. [1] [2] [3] [4] [5]

The BL24C16F EEPROM is found in the schematic for Radxa ROCK 4D. [6]

Add these eeprom nodes.

These are designed to have data written during factory programming
(regardless of whether data is actually written or not), and we at
Radxa permit users to read the data but not write to it. [8]
Therefore, we will add a read-only property to the eeprom node.

[1] https://dl.radxa.com/cm3i/docs/hw/radxa_cm3i_v1310_schematic.pdf p.8
[2] https://dl.radxa.com/rock3/docs/hw/3a/radxa_rock_3a_v1310_schematic.pdf p.7
[3] https://dl.radxa.com/rock3/docs/hw/3b/Radxa_ROCK_3B_V1.51_SCH.pdf p.35
[4] https://dl.radxa.com/rock5/5b+/docs/hw/radxa_rock5bp_v1.2_schematic.pdf p.29
[5] https://dl.radxa.com/rock5/5t/docs/hw/radxa_rock5t_schematic_v1.2_20250109.pdf p.36
[6] https://dl.radxa.com/rock4/4d/docs/hw/Radxa_ROCK_4D_SCH_V1.12.pdf p.23
[7] https://github.com/radxa/u-boot/blob/next-dev-v2024.10/drivers/misc/radxa-i2c-eeprom.c

Signed-off-by: FUKAUMI Naoki <naoki@radxa.com>
---
 .../arm64/boot/dts/rockchip/rk3568-radxa-cm3i.dtsi | 10 +++++++++-
 arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts    |  8 ++++++++
 arch/arm64/boot/dts/rockchip/rk3568-rock-3b.dts    |  8 ++++++++
 arch/arm64/boot/dts/rockchip/rk3576-rock-4d.dts    | 14 ++++++++++++++
 .../boot/dts/rockchip/rk3588-rock-5b-plus.dts      | 10 ++++++++++
 arch/arm64/boot/dts/rockchip/rk3588-rock-5t.dts    | 10 ++++++++++
 6 files changed, 59 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3568-radxa-cm3i.dtsi b/arch/arm64/boot/dts/rockchip/rk3568-radxa-cm3i.dtsi
index 729e38b9f620..f97a0eb7f7c0 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-radxa-cm3i.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3568-radxa-cm3i.dtsi
@@ -321,7 +321,7 @@ regulator-state-mem {
 				};
 			};
 
-			vcc_3v3: SWITCH_REG1 {
+			gpio_vref: vcc_3v3: SWITCH_REG1 {
 				regulator-name = "vcc_3v3";
 				regulator-always-on;
 				regulator-boot-on;
@@ -340,6 +340,14 @@ regulator-state-mem {
 			};
 		};
 	};
+
+	eeprom@50 {
+		compatible = "belling,bl24c16a", "atmel,24c16";
+		reg = <0x50>;
+		pagesize = <16>;
+		read-only;
+		vcc-supply = <&gpio_vref>;
+	};
 };
 
 &pinctrl {
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts b/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
index 44cfdfeed668..9214e38648f2 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
@@ -532,6 +532,14 @@ regulator-state-mem {
 			};
 		};
 	};
+
+	eeprom@50 {
+		compatible = "belling,bl24c16a", "atmel,24c16";
+		reg = <0x50>;
+		pagesize = <16>;
+		read-only;
+		vcc-supply = <&vcc3v3_pmu>;
+	};
 };
 
 &i2c3 {
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-rock-3b.dts b/arch/arm64/boot/dts/rockchip/rk3568-rock-3b.dts
index 3d0c1ccfaa79..69001e453732 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-rock-3b.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-rock-3b.dts
@@ -480,6 +480,14 @@ regulator-state-mem {
 			};
 		};
 	};
+
+	eeprom@50 {
+		compatible = "belling,bl24c16a", "atmel,24c16";
+		reg = <0x50>;
+		pagesize = <16>;
+		read-only;
+		vcc-supply = <&vcc3v3_sys>;
+	};
 };
 
 &i2c5 {
diff --git a/arch/arm64/boot/dts/rockchip/rk3576-rock-4d.dts b/arch/arm64/boot/dts/rockchip/rk3576-rock-4d.dts
index 7023dc326d0e..899a84b1fbf9 100644
--- a/arch/arm64/boot/dts/rockchip/rk3576-rock-4d.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3576-rock-4d.dts
@@ -682,6 +682,20 @@ hym8563: rtc@51 {
 	};
 };
 
+&i2c6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c6m3_xfer>;
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "belling,bl24c16f", "atmel,24c16";
+		reg = <0x50>;
+		pagesize = <16>;
+		read-only;
+		vcc-supply = <&vcc_3v3_s3>;
+	};
+};
+
 &mdio0 {
 	rgmii_phy0: ethernet-phy@1 {
 		compatible = "ethernet-phy-id001c.c916";
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b-plus.dts b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b-plus.dts
index 07a840d9b385..30d15c7e860a 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b-plus.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b-plus.dts
@@ -69,6 +69,16 @@ wwan-wake-n-hog {
 	};
 };
 
+&i2c1 {
+	eeprom@50 {
+		compatible = "belling,bl24c16a", "atmel,24c16";
+		reg = <0x50>;
+		pagesize = <16>;
+		read-only;
+		vcc-supply = <&vcc_3v3_s3>;
+	};
+};
+
 &pcie30phy {
 	data-lanes = <1 1 2 2>;
 };
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5t.dts b/arch/arm64/boot/dts/rockchip/rk3588-rock-5t.dts
index 0dd90c744380..425036146b6d 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-rock-5t.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5t.dts
@@ -60,6 +60,16 @@ &hdmi_receiver {
 	status = "okay";
 };
 
+&i2c1 {
+	eeprom@50 {
+		compatible = "belling,bl24c16a", "atmel,24c16";
+		reg = <0x50>;
+		pagesize = <16>;
+		read-only;
+		vcc-supply = <&vcc_3v3_s3>;
+	};
+};
+
 &pcie2x1l1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pcie2_1_rst>;
-- 
2.43.0

Re: [RESEND PATCH 1/3] dt-bindings: eeprom: at24: Add compatible for Belling BL24C04A/BL24C16F

[Krzysztof Kozlowski]

On 02/12/2025 09:49, FUKAUMI Naoki wrote:
> Add the compatible for Belling BL24C04A 4Kb EEPROM and BL24C16F 16Kb
> EEPROM.
> 
> Signed-off-by: FUKAUMI Naoki <naoki@radxa.com>
> ---
>  Documentation/devicetree/bindings/eeprom/at24.yaml | 2 ++
>  1 file changed, 2 insertions(+)
> 


Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>

Best regards,
Krzysztof