Re: [PATCH v19 1/3] dt-bindings: leds: add TI/National Semiconductor LP5812 LED Driver

[Rob Herring <robh@kernel.org>]

On Wed, Dec 03, 2025 at 11:40:33PM +0700, Nam Tran wrote:
> On Sun, 30 Nov 2025, Rob Herring (Arm) wrote:
> 
> > On Sun, 30 Nov 2025 22:39:54 +0700, Nam Tran wrote:
> > > The LP5812 is a 4x3 RGB LED driver with an autonomous animation
> > > engine and time-cross-multiplexing (TCM) support for up to 12 LEDs
> > > or 4 RGB LEDs. It supports both analog (256 levels) and PWM (8-bit)
> > > dimming, including exponential PWM for smooth brightness control.
> > > 
> > > Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
> > > Signed-off-by: Nam Tran <trannamatk@gmail.com>
> > > ---
> > >  .../devicetree/bindings/leds/ti,lp5812.yaml   | 246 ++++++++++++++++++
> > >  MAINTAINERS                                   |   6 +
> > >  2 files changed, 252 insertions(+)
> > >  create mode 100644 Documentation/devicetree/bindings/leds/ti,lp5812.yaml
> > > 
> > 
> > My bot found errors running 'make dt_binding_check' on your patch:
> > 
> > yamllint warnings/errors:
> > 
> > dtschema/dtc warnings/errors:
> > Documentation/devicetree/bindings/thermal/thermal-zones.example.dtb: /example-0/soc/thermal-sensor@c263000: failed to match any schema with compatible: ['qcom,sdm845-tsens', 'qcom,tsens-v2']
> > Documentation/devicetree/bindings/thermal/thermal-zones.example.dtb: /example-0/soc/thermal-sensor@c263000: failed to match any schema with compatible: ['qcom,sdm845-tsens', 'qcom,tsens-v2']
> > Documentation/devicetree/bindings/thermal/thermal-zones.example.dtb: /example-0/soc/thermal-sensor@c265000: failed to match any schema with compatible: ['qcom,sdm845-tsens', 'qcom,tsens-v2']
> > Documentation/devicetree/bindings/thermal/thermal-zones.example.dtb: /example-0/soc/thermal-sensor@c265000: failed to match any schema with compatible: ['qcom,sdm845-tsens', 'qcom,tsens-v2']
> > Documentation/devicetree/bindings/thermal/thermal-sensor.example.dtb: /example-0/soc/thermal-sensor@c263000: failed to match any schema with compatible: ['qcom,sdm845-tsens', 'qcom,tsens-v2']
> > Documentation/devicetree/bindings/thermal/thermal-sensor.example.dtb: /example-0/soc/thermal-sensor@c263000: failed to match any schema with compatible: ['qcom,sdm845-tsens', 'qcom,tsens-v2']
> > Documentation/devicetree/bindings/thermal/thermal-sensor.example.dtb: /example-0/soc/thermal-sensor@c265000: failed to match any schema with compatible: ['qcom,sdm845-tsens', 'qcom,tsens-v2']
> > Documentation/devicetree/bindings/thermal/thermal-sensor.example.dtb: /example-0/soc/thermal-sensor@c265000: failed to match any schema with compatible: ['qcom,sdm845-tsens', 'qcom,tsens-v2']
> > 
> > doc reference errors (make refcheckdocs):
> > 
> > See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20251130153956.241375-2-trannamatk@gmail.com
> 
> Accessing the link results in a 404 error on my side, is it expected?

That's patchwork.kernel.org now.


> > The base for the series is generally the latest rc1. A different dependency
> > should be noted in *this* patch.
> > 
> > If you already ran 'make dt_binding_check' and didn't see the above
> > error(s), then make sure 'yamllint' is installed and dt-schema is up to
> > date:
> > 
> > pip3 install dtschema --upgrade
> > 
> > Please check and re-submit after running the above command yourself. Note
> > that DT_SCHEMA_FILES can be set to your schema file to speed up checking
> > your schema. However, it must be unset to test all examples with your schema.
> 
> The LP5812 binding validates correctly. The errors reported by the bot come
> from the unrelated thermal bindings. Is it normal for the bot to report these
> unrelated errors?

You can ignore the bot report, linux-next broke it over the holidays.

Rob