[PATCH v5 2/4] phy: qcom: edp: Fix the DP_PHY_AUX_CFG registers count

[Abel Vesa <abel.vesa@oss.qualcomm.com>]

From: Abel Vesa <abel.vesa@linaro.org>

On all platforms supported by this driver, there are 13 DP_PHY_AUX_CFGx
registers. This hasn't been an issue so far on currently supported
platforms, because the init sequence never spanned beyond DP_PHY_AUX_CFG9.

However, on the new upcoming Glymur platform, these are updated along
with the rest of the init sequence.

So update the size of the array holding the config to 13.

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
---
 drivers/phy/qualcomm/phy-qcom-edp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-edp.c b/drivers/phy/qualcomm/phy-qcom-edp.c
index 06a08c9ea0f7..f98fe83de42e 100644
--- a/drivers/phy/qualcomm/phy-qcom-edp.c
+++ b/drivers/phy/qualcomm/phy-qcom-edp.c
@@ -32,7 +32,7 @@
 #define DP_PHY_PD_CTL                           0x001c
 #define DP_PHY_MODE                             0x0020
 
-#define DP_AUX_CFG_SIZE                         10
+#define DP_AUX_CFG_SIZE                         13
 #define DP_PHY_AUX_CFG(n)                       (0x24 + (0x04 * (n)))
 
 #define DP_PHY_AUX_INTERRUPT_MASK		0x0058

-- 
2.48.1