* [PATCH] ARM: dts: aspeed: bletchley: Fix dt-schema warnings
@ 2025-12-11 8:03 Cosmo Chou
2025-12-11 14:07 ` Rob Herring
2025-12-12 3:37 ` Krzysztof Kozlowski
0 siblings, 2 replies; 3+ messages in thread
From: Cosmo Chou @ 2025-12-11 8:03 UTC (permalink / raw)
To: robh, krzk+dt, conor+dt, joel, andrew
Cc: devicetree, linux-arm-kernel, linux-aspeed, linux-kernel,
cosmo.chou, Cosmo Chou
Update the device tree to fix dt-schema warnings:
- Use generic node names for SPI, LEDs, and GPIO keys.
- Update SPI GPIO properties to use the "-gpios" suffix.
- Remove unused address/size cells from pca9539 nodes.
- Use 'aspeed,int-vref-microvolt' in ADC nodes.
- Remove unused 'aspeed,hw-timeout-ms' from i2c13.
Signed-off-by: Cosmo Chou <chou.cosmo@gmail.com>
---
.../aspeed/aspeed-bmc-facebook-bletchley.dts | 100 ++++++++++--------
1 file changed, 54 insertions(+), 46 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-bletchley.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-bletchley.dts
index abdb1562115a..7c27bf6bb51d 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-bletchley.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-bletchley.dts
@@ -34,14 +34,14 @@ iio-hwmon {
<&adc1 4>, <&adc1 5>, <&adc1 6>, <&adc1 7>;
};
- spi1_gpio: spi1-gpio {
+ spi1_gpio: spi {
compatible = "spi-gpio";
#address-cells = <1>;
#size-cells = <0>;
- gpio-sck = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
- gpio-mosi = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
- gpio-miso = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>;
+ sck-gpios = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
+ mosi-gpios = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
+ miso-gpios = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>;
num-chipselects = <1>;
cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
@@ -54,7 +54,8 @@ tpm@0 {
front_gpio_leds {
compatible = "gpio-leds";
- sys_log_id {
+ led-0 {
+ label = "sys_log_id";
default-state = "off";
gpios = <&front_leds 0 GPIO_ACTIVE_LOW>;
};
@@ -62,42 +63,50 @@ sys_log_id {
fan_gpio_leds {
compatible = "gpio-leds";
- fan0_blue {
+ led-0 {
+ label = "fan0_blue";
retain-state-shutdown;
default-state = "on";
gpios = <&fan_leds 8 GPIO_ACTIVE_HIGH>;
};
- fan1_blue {
+ led-1 {
+ label = "fan1_blue";
retain-state-shutdown;
default-state = "on";
gpios = <&fan_leds 9 GPIO_ACTIVE_HIGH>;
};
- fan2_blue {
+ led-2 {
+ label = "fan2_blue";
retain-state-shutdown;
default-state = "on";
gpios = <&fan_leds 10 GPIO_ACTIVE_HIGH>;
};
- fan3_blue {
+ led-3 {
+ label = "fan3_blue";
retain-state-shutdown;
default-state = "on";
gpios = <&fan_leds 11 GPIO_ACTIVE_HIGH>;
};
- fan0_amber {
+ led-4 {
+ label = "fan0_amber";
retain-state-shutdown;
default-state = "off";
gpios = <&fan_leds 12 GPIO_ACTIVE_HIGH>;
};
- fan1_amber {
+ led-5 {
+ label = "fan1_amber";
retain-state-shutdown;
default-state = "off";
gpios = <&fan_leds 13 GPIO_ACTIVE_HIGH>;
};
- fan2_amber {
+ led-6 {
+ label = "fan2_amber";
retain-state-shutdown;
default-state = "off";
gpios = <&fan_leds 14 GPIO_ACTIVE_HIGH>;
};
- fan3_amber {
+ led-7 {
+ label = "fan3_amber";
retain-state-shutdown;
default-state = "off";
gpios = <&fan_leds 15 GPIO_ACTIVE_HIGH>;
@@ -106,12 +115,14 @@ fan3_amber {
sled1_gpio_leds {
compatible = "gpio-leds";
- sled1_amber {
+ led-0 {
+ label = "sled1_amber";
retain-state-shutdown;
default-state = "keep";
gpios = <&sled1_leds 0 GPIO_ACTIVE_LOW>;
};
- sled1_blue {
+ led-1 {
+ label = "sled1_blue";
retain-state-shutdown;
default-state = "keep";
gpios = <&sled1_leds 1 GPIO_ACTIVE_LOW>;
@@ -120,12 +131,14 @@ sled1_blue {
sled2_gpio_leds {
compatible = "gpio-leds";
- sled2_amber {
+ led-0 {
+ label = "sled2_amber";
retain-state-shutdown;
default-state = "keep";
gpios = <&sled2_leds 0 GPIO_ACTIVE_LOW>;
};
- sled2_blue {
+ led-1 {
+ label = "sled2_blue";
retain-state-shutdown;
default-state = "keep";
gpios = <&sled2_leds 1 GPIO_ACTIVE_LOW>;
@@ -134,12 +147,14 @@ sled2_blue {
sled3_gpio_leds {
compatible = "gpio-leds";
- sled3_amber {
+ led-0 {
+ label = "sled3_amber";
retain-state-shutdown;
default-state = "keep";
gpios = <&sled3_leds 0 GPIO_ACTIVE_LOW>;
};
- sled3_blue {
+ led-1 {
+ label = "sled3_blue";
retain-state-shutdown;
default-state = "keep";
gpios = <&sled3_leds 1 GPIO_ACTIVE_LOW>;
@@ -148,12 +163,14 @@ sled3_blue {
sled4_gpio_leds {
compatible = "gpio-leds";
- sled4_amber {
+ led-0 {
+ label = "sled4_amber";
retain-state-shutdown;
default-state = "keep";
gpios = <&sled4_leds 0 GPIO_ACTIVE_LOW>;
};
- sled4_blue {
+ led-1 {
+ label = "sled4_blue";
retain-state-shutdown;
default-state = "keep";
gpios = <&sled4_leds 1 GPIO_ACTIVE_LOW>;
@@ -162,12 +179,14 @@ sled4_blue {
sled5_gpio_leds {
compatible = "gpio-leds";
- sled5_amber {
+ led-0 {
+ label = "sled5_amber";
retain-state-shutdown;
default-state = "keep";
gpios = <&sled5_leds 0 GPIO_ACTIVE_LOW>;
};
- sled5_blue {
+ led-1 {
+ label = "sled5_blue";
retain-state-shutdown;
default-state = "keep";
gpios = <&sled5_leds 1 GPIO_ACTIVE_LOW>;
@@ -176,12 +195,14 @@ sled5_blue {
sled6_gpio_leds {
compatible = "gpio-leds";
- sled6_amber {
+ led-0 {
+ label = "sled6_amber";
retain-state-shutdown;
default-state = "keep";
gpios = <&sled6_leds 0 GPIO_ACTIVE_LOW>;
};
- sled6_blue {
+ led-1 {
+ label = "sled6_blue";
retain-state-shutdown;
default-state = "keep";
gpios = <&sled6_leds 1 GPIO_ACTIVE_LOW>;
@@ -191,32 +212,32 @@ sled6_blue {
gpio-keys {
compatible = "gpio-keys";
- presence-sled1 {
+ presence-sled1-switch {
label = "presence-sled1";
gpios = <&gpio0 ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(H, 2)>;
};
- presence-sled2 {
+ presence-sled2-switch {
label = "presence-sled2";
gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(H, 3)>;
};
- presence-sled3 {
+ presence-sled3-switch {
label = "presence-sled3";
gpios = <&gpio0 ASPEED_GPIO(H, 4) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(H, 4)>;
};
- presence-sled4 {
+ presence-sled4-switch {
label = "presence-sled4";
gpios = <&gpio0 ASPEED_GPIO(H, 5) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(H, 5)>;
};
- presence-sled5 {
+ presence-sled5-switch {
label = "presence-sled5";
gpios = <&gpio0 ASPEED_GPIO(H, 6) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(H, 6)>;
};
- presence-sled6 {
+ presence-sled6-switch {
label = "presence-sled6";
gpios = <&gpio0 ASPEED_GPIO(H, 7) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(H, 7)>;
@@ -352,8 +373,6 @@ sled1_ioexp41: pca9536@41 {
sled1_ioexp: pca9539@76 {
compatible = "nxp,pca9539";
reg = <0x76>;
- #address-cells = <1>;
- #size-cells = <0>;
gpio-controller;
#gpio-cells = <2>;
@@ -441,8 +460,6 @@ sled2_ioexp41: pca9536@41 {
sled2_ioexp: pca9539@76 {
compatible = "nxp,pca9539";
reg = <0x76>;
- #address-cells = <1>;
- #size-cells = <0>;
gpio-controller;
#gpio-cells = <2>;
@@ -530,8 +547,6 @@ sled3_ioexp41: pca9536@41 {
sled3_ioexp: pca9539@76 {
compatible = "nxp,pca9539";
reg = <0x76>;
- #address-cells = <1>;
- #size-cells = <0>;
gpio-controller;
#gpio-cells = <2>;
@@ -619,8 +634,6 @@ sled4_ioexp41: pca9536@41 {
sled4_ioexp: pca9539@76 {
compatible = "nxp,pca9539";
reg = <0x76>;
- #address-cells = <1>;
- #size-cells = <0>;
gpio-controller;
#gpio-cells = <2>;
@@ -708,8 +721,6 @@ sled5_ioexp41: pca9536@41 {
sled5_ioexp: pca9539@76 {
compatible = "nxp,pca9539";
reg = <0x76>;
- #address-cells = <1>;
- #size-cells = <0>;
gpio-controller;
#gpio-cells = <2>;
@@ -797,8 +808,6 @@ sled6_ioexp41: pca9536@41 {
sled6_ioexp: pca9539@76 {
compatible = "nxp,pca9539";
reg = <0x76>;
- #address-cells = <1>;
- #size-cells = <0>;
gpio-controller;
#gpio-cells = <2>;
@@ -953,7 +962,6 @@ fan_leds: pca9552@67 {
&i2c13 {
multi-master;
- aspeed,hw-timeout-ms = <1000>;
status = "okay";
//USB Debug Connector
@@ -1024,7 +1032,7 @@ &gpio0 {
};
&adc0 {
- vref = <1800>;
+ aspeed,int-vref-microvolt = <2500000>;
status = "okay";
pinctrl-names = "default";
@@ -1035,7 +1043,7 @@ &pinctrl_adc4_default &pinctrl_adc5_default
};
&adc1 {
- vref = <2500>;
+ aspeed,int-vref-microvolt = <2500000>;
status = "okay";
pinctrl-names = "default";
--
2.43.0
^ permalink raw reply related [flat|nested] 3+ messages in thread* Re: [PATCH] ARM: dts: aspeed: bletchley: Fix dt-schema warnings
2025-12-11 8:03 [PATCH] ARM: dts: aspeed: bletchley: Fix dt-schema warnings Cosmo Chou
@ 2025-12-11 14:07 ` Rob Herring
2025-12-12 3:37 ` Krzysztof Kozlowski
1 sibling, 0 replies; 3+ messages in thread
From: Rob Herring @ 2025-12-11 14:07 UTC (permalink / raw)
To: Cosmo Chou
Cc: joel, cosmo.chou, krzk+dt, linux-arm-kernel, linux-kernel,
linux-aspeed, andrew, conor+dt, devicetree
On Thu, 11 Dec 2025 16:03:11 +0800, Cosmo Chou wrote:
> Update the device tree to fix dt-schema warnings:
> - Use generic node names for SPI, LEDs, and GPIO keys.
> - Update SPI GPIO properties to use the "-gpios" suffix.
> - Remove unused address/size cells from pca9539 nodes.
> - Use 'aspeed,int-vref-microvolt' in ADC nodes.
> - Remove unused 'aspeed,hw-timeout-ms' from i2c13.
>
> Signed-off-by: Cosmo Chou <chou.cosmo@gmail.com>
> ---
> .../aspeed/aspeed-bmc-facebook-bletchley.dts | 100 ++++++++++--------
> 1 file changed, 54 insertions(+), 46 deletions(-)
>
My bot found new DTB warnings on the .dts files added or changed in this
series.
Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.
If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:
pip3 install dtschema --upgrade
This patch series was applied (using b4) to base:
Base: attempting to guess base-commit...
Base: tags/next-20251211 (exact match)
Base: tags/next-20251211 (use --merge-base to override)
If this is not the correct base, please add 'base-commit' tag
(or use b4 which does this automatically)
New warnings running 'make CHECK_DTBS=y for arch/arm/boot/dts/aspeed/' for 20251211080311.242771-1-chou.cosmo@gmail.com:
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-bletchley.dtb: adc@1e6e9000 (aspeed,ast2600-adc0): 'interrupts' does not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/iio/adc/aspeed,ast2600-adc.yaml
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-bletchley.dtb: adc@1e6e9100 (aspeed,ast2600-adc1): 'interrupts' does not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/iio/adc/aspeed,ast2600-adc.yaml
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] ARM: dts: aspeed: bletchley: Fix dt-schema warnings
2025-12-11 8:03 [PATCH] ARM: dts: aspeed: bletchley: Fix dt-schema warnings Cosmo Chou
2025-12-11 14:07 ` Rob Herring
@ 2025-12-12 3:37 ` Krzysztof Kozlowski
1 sibling, 0 replies; 3+ messages in thread
From: Krzysztof Kozlowski @ 2025-12-12 3:37 UTC (permalink / raw)
To: Cosmo Chou, robh, krzk+dt, conor+dt, joel, andrew
Cc: devicetree, linux-arm-kernel, linux-aspeed, linux-kernel,
cosmo.chou
On 11/12/2025 09:03, Cosmo Chou wrote:
> Update the device tree to fix dt-schema warnings:
> - Use generic node names for SPI, LEDs, and GPIO keys.
> - Update SPI GPIO properties to use the "-gpios" suffix.
> - Remove unused address/size cells from pca9539 nodes.
> - Use 'aspeed,int-vref-microvolt' in ADC nodes.
> - Remove unused 'aspeed,hw-timeout-ms' from i2c13.
You need to split your commit. Please see submitting patches describing
the process.
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2025-12-12 3:37 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2025-12-11 8:03 [PATCH] ARM: dts: aspeed: bletchley: Fix dt-schema warnings Cosmo Chou
2025-12-11 14:07 ` Rob Herring
2025-12-12 3:37 ` Krzysztof Kozlowski
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).