From: "Benoît Monin" <benoit.monin@bootlin.com>
To: "Vladimir Kondratiev" <vladimir.kondratiev@mobileye.com>,
"Gregory CLEMENT" <gregory.clement@bootlin.com>,
"Théo Lebrun" <theo.lebrun@bootlin.com>,
"Thomas Bogendoerfer" <tsbogend@alpha.franken.de>,
"Rob Herring" <robh@kernel.org>,
"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
"Conor Dooley" <conor+dt@kernel.org>,
"Michael Turquette" <mturquette@baylibre.com>,
"Stephen Boyd" <sboyd@kernel.org>,
"Philipp Zabel" <p.zabel@pengutronix.de>,
"Linus Walleij" <linusw@kernel.org>
Cc: "Thomas Petazzoni" <thomas.petazzoni@bootlin.com>,
"Tawfik Bayouk" <tawfik.bayouk@mobileye.com>,
linux-mips@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org,
linux-gpio@vger.kernel.org,
"Benoît Monin" <benoit.monin@bootlin.com>
Subject: [PATCH 12/13] MIPS: config: add eyeq6lplus_defconfig
Date: Wed, 17 Dec 2025 14:36:02 +0100 [thread overview]
Message-ID: <20251217-eyeq6lplus-v1-12-e9cdbd3af4c2@bootlin.com> (raw)
In-Reply-To: <20251217-eyeq6lplus-v1-0-e9cdbd3af4c2@bootlin.com>
Add a default configuration for Mobileye EyeQ6Lplus evaluation board.
Signed-off-by: Benoît Monin <benoit.monin@bootlin.com>
---
arch/mips/configs/eyeq6lplus_defconfig | 119 +++++++++++++++++++++++++++++++++
1 file changed, 119 insertions(+)
diff --git a/arch/mips/configs/eyeq6lplus_defconfig b/arch/mips/configs/eyeq6lplus_defconfig
new file mode 100644
index 000000000000..dc54c3fd1b8a
--- /dev/null
+++ b/arch/mips/configs/eyeq6lplus_defconfig
@@ -0,0 +1,119 @@
+CONFIG_SYSVIPC=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_BPF_SYSCALL=y
+CONFIG_TASKSTATS=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_MEMCG=y
+CONFIG_BLK_CGROUP=y
+CONFIG_CFS_BANDWIDTH=y
+CONFIG_RT_GROUP_SCHED=y
+CONFIG_CGROUP_PIDS=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CPUSETS=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_NAMESPACES=y
+CONFIG_USER_NS=y
+CONFIG_SCHED_AUTOGROUP=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_EXPERT=y
+CONFIG_EYEQ=y
+CONFIG_MACH_EYEQ6LPLUS=y
+CONFIG_MIPS_CPS=y
+CONFIG_CPU_HAS_MSA=y
+CONFIG_NR_CPUS=16
+CONFIG_MIPS_RAW_APPENDED_DTB=y
+CONFIG_JUMP_LABEL=y
+CONFIG_PAGE_SIZE_16KB=y
+CONFIG_COMPAT_32BIT_TIME=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_TRIM_UNUSED_KSYMS=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_USERFAULTFD=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_NETFILTER=y
+CONFIG_CAN=y
+CONFIG_PCI=y
+CONFIG_PCI_MSI=y
+CONFIG_PCI_DEBUG=y
+CONFIG_PCI_ENDPOINT=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_CONNECTOR=y
+CONFIG_MTD=y
+CONFIG_MTD_SPI_NAND=y
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_BLOCK=y
+CONFIG_SCSI=y
+CONFIG_NETDEVICES=y
+CONFIG_MACVLAN=y
+CONFIG_IPVLAN=y
+CONFIG_MACB=y
+CONFIG_MARVELL_PHY=y
+CONFIG_MICREL_PHY=y
+CONFIG_CAN_M_CAN=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_DW=y
+CONFIG_HW_RANDOM=y
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_DESIGNWARE_CORE=y
+CONFIG_SPI=y
+CONFIG_SPI_CADENCE_QUADSPI=y
+CONFIG_SPI_DESIGNWARE=y
+CONFIG_SPI_DW_MMIO=y
+CONFIG_SPI_SPIDEV=y
+CONFIG_SPI_SLAVE=y
+# CONFIG_PTP_1588_CLOCK is not set
+CONFIG_PINCTRL=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_DWAPB=y
+CONFIG_MFD_SYSCON=y
+CONFIG_HID_A4TECH=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_EZKEY=y
+CONFIG_HID_ITE=y
+CONFIG_HID_KENSINGTON=y
+CONFIG_HID_REDRAGON=y
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_SDHCI_CADENCE=y
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_RESET_CONTROLLER=y
+# CONFIG_NVMEM is not set
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+CONFIG_FS_ENCRYPTION=y
+CONFIG_FUSE_FS=y
+CONFIG_CUSE=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_UBIFS_FS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_NFS_V4_1=y
+CONFIG_NFS_V4_2=y
+CONFIG_ROOT_NFS=y
+CONFIG_FRAME_WARN=1024
+CONFIG_DEBUG_FS=y
+# CONFIG_RCU_TRACE is not set
+# CONFIG_FTRACE is not set
--
2.52.0
next prev parent reply other threads:[~2025-12-17 13:36 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-12-17 13:35 [PATCH 00/13] Introducing the Mobileye EyeQ6Lplus SoC Benoît Monin
2025-12-17 13:35 ` [PATCH 01/13] dt-bindings: mips: Add " Benoît Monin
2025-12-19 21:10 ` Rob Herring (Arm)
2025-12-17 13:35 ` [PATCH 02/13] dt-bindings: soc: mobileye: Add EyeQ6Lplus OLB Benoît Monin
2025-12-19 21:10 ` Rob Herring (Arm)
2025-12-17 13:35 ` [PATCH 03/13] MIPS: Add Mobileye eyeQ6Lplus support Benoît Monin
2025-12-17 13:35 ` [PATCH 04/13] reset: eyeq: Add Mobileye EyeQ6Lplus OLB Benoît Monin
2025-12-17 13:35 ` [PATCH 05/13] pinctrl: eyeq5: Use match data Benoît Monin
2025-12-20 13:46 ` kernel test robot
2025-12-20 14:34 ` kernel test robot
2025-12-17 13:35 ` [PATCH 06/13] pinctrl: eyeq5: Add Mobileye EyeQ6Lplus OLB Benoît Monin
2025-12-17 13:35 ` [PATCH 07/13] clk: eyeq: Skip post-divisor when computing PLL frequency Benoît Monin
2025-12-17 13:35 ` [PATCH 08/13] clk: eyeq: Adjust PLL accuracy computation Benoît Monin
2025-12-17 13:35 ` [PATCH 09/13] clk: eyeq: Add Mobileye EyeQ6Lplus OLB Benoît Monin
2025-12-17 13:36 ` [PATCH 10/13] MIPS: Add Mobileye EyeQ6Lplus SoC dtsi Benoît Monin
2025-12-17 13:36 ` [PATCH 11/13] MIPS: Add Mobileye EyeQ6Lplus evaluation board dts Benoît Monin
2025-12-18 15:30 ` Krzysztof Kozlowski
2025-12-19 15:57 ` Benoît Monin
2025-12-19 16:28 ` Krzysztof Kozlowski
2026-01-01 22:42 ` Linus Walleij
2026-01-02 15:27 ` Benoît Monin
2025-12-17 13:36 ` Benoît Monin [this message]
2025-12-17 13:36 ` [PATCH 13/13] MAINTAINERS: Mobileye: Add EyeQ6Lplus files Benoît Monin
2025-12-19 12:03 ` [PATCH 00/13] Introducing the Mobileye EyeQ6Lplus SoC Linus Walleij
2025-12-19 16:22 ` Benoît Monin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251217-eyeq6lplus-v1-12-e9cdbd3af4c2@bootlin.com \
--to=benoit.monin@bootlin.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=gregory.clement@bootlin.com \
--cc=krzk+dt@kernel.org \
--cc=linusw@kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=p.zabel@pengutronix.de \
--cc=robh@kernel.org \
--cc=sboyd@kernel.org \
--cc=tawfik.bayouk@mobileye.com \
--cc=theo.lebrun@bootlin.com \
--cc=thomas.petazzoni@bootlin.com \
--cc=tsbogend@alpha.franken.de \
--cc=vladimir.kondratiev@mobileye.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).