From: Stafford Horne <shorne@gmail.com>
To: LKML <linux-kernel@vger.kernel.org>
Cc: Linux OpenRISC <linux-openrisc@vger.kernel.org>,
Stafford Horne <shorne@gmail.com>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Jonas Bonn <jonas@southpole.se>,
Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>,
devicetree@vger.kernel.org
Subject: [PATCH v2 5/5] openrisc: dts: Add de0 nano multicore config and devicetree
Date: Wed, 17 Dec 2025 08:08:31 +0000 [thread overview]
Message-ID: <20251217080843.70621-6-shorne@gmail.com> (raw)
In-Reply-To: <20251217080843.70621-1-shorne@gmail.com>
Add a multicore configuration for the Terasic de0 nano FPGA development
board. This SoC runs 2 OpenRISC CPUs at 50Mhz with 32MB ram, UART for
console and GPIOs for LEDs.
This FPGA SoC is based on the simple-smp reference board and brings in
devices from the de0 nano common DTSI file.
A default config is added that brings together the device tree and
driver setup.
Link: https://github.com/stffrdhrn/de0_nano-multicore
Signed-off-by: Stafford Horne <shorne@gmail.com>
---
arch/openrisc/boot/dts/de0-nano-multicore.dts | 25 +++++
.../configs/de0_nano_multicore_defconfig | 92 +++++++++++++++++++
2 files changed, 117 insertions(+)
create mode 100644 arch/openrisc/boot/dts/de0-nano-multicore.dts
create mode 100644 arch/openrisc/configs/de0_nano_multicore_defconfig
diff --git a/arch/openrisc/boot/dts/de0-nano-multicore.dts b/arch/openrisc/boot/dts/de0-nano-multicore.dts
new file mode 100644
index 000000000000..b6cf286afaa4
--- /dev/null
+++ b/arch/openrisc/boot/dts/de0-nano-multicore.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/dts-v1/;
+
+#include "simple-smp.dtsi"
+#include "de0-nano-common.dtsi"
+
+/ {
+ model = "Terasic DE0 Nano - Multicore";
+};
+
+&cpu0 {
+ clock-frequency = <50000000>;
+};
+
+&cpu1 {
+ clock-frequency = <50000000>;
+};
+
+&serial0 {
+ clock-frequency = <50000000>;
+};
diff --git a/arch/openrisc/configs/de0_nano_multicore_defconfig b/arch/openrisc/configs/de0_nano_multicore_defconfig
new file mode 100644
index 000000000000..d33b1226e09c
--- /dev/null
+++ b/arch/openrisc/configs/de0_nano_multicore_defconfig
@@ -0,0 +1,92 @@
+CONFIG_LOCALVERSION="-de0nano-smp"
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_NO_HZ=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_RD_GZIP is not set
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+# CONFIG_RD_XZ is not set
+# CONFIG_RD_LZO is not set
+# CONFIG_RD_LZ4 is not set
+CONFIG_EXPERT=y
+# CONFIG_EPOLL is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_AIO is not set
+CONFIG_KALLSYMS_ALL=y
+CONFIG_DCACHE_WRITETHROUGH=y
+CONFIG_BUILTIN_DTB_NAME="de0-nano-multicore"
+CONFIG_OPENRISC_HAVE_INST_CMOV=y
+CONFIG_SMP=y
+CONFIG_HZ_100=y
+CONFIG_JUMP_LABEL=y
+# CONFIG_BLOCK is not set
+CONFIG_SLUB_TINY=y
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_UNIX_DIAG=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_TCP_CONG_ADVANCED=y
+# CONFIG_TCP_CONG_BIC is not set
+# CONFIG_TCP_CONG_CUBIC is not set
+# CONFIG_TCP_CONG_WESTWOOD is not set
+# CONFIG_TCP_CONG_HTCP is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FW_LOADER is not set
+CONFIG_NETDEVICES=y
+CONFIG_ETHOC=y
+CONFIG_MICREL_PHY=y
+# CONFIG_WLAN is not set
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_GPIO_SYSFS=y
+# CONFIG_GPIO_CDEV_V1 is not set
+CONFIG_GPIO_GENERIC_PLATFORM=y
+# CONFIG_HWMON is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_ONESHOT=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_CPU=y
+CONFIG_LEDS_TRIGGER_ACTIVITY=y
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+CONFIG_LEDS_TRIGGER_TRANSIENT=y
+CONFIG_LEDS_TRIGGER_PANIC=y
+CONFIG_LEDS_TRIGGER_NETDEV=y
+CONFIG_LEDS_TRIGGER_PATTERN=y
+CONFIG_LEDS_TRIGGER_TTY=y
+# CONFIG_DNOTIFY is not set
+CONFIG_TMPFS=y
+CONFIG_NFS_FS=y
+CONFIG_XZ_DEC=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
+CONFIG_GDB_SCRIPTS=y
+CONFIG_VMLINUX_MAP=y
+CONFIG_HARDLOCKUP_DETECTOR=y
+CONFIG_WQ_WATCHDOG=y
+CONFIG_WQ_CPU_INTENSIVE_REPORT=y
+CONFIG_STACKTRACE=y
+CONFIG_RCU_CPU_STALL_CPUTIME=y
+# CONFIG_RCU_TRACE is not set
--
2.51.0
prev parent reply other threads:[~2025-12-17 8:09 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20251217080843.70621-1-shorne@gmail.com>
2025-12-17 8:08 ` [PATCH v2 1/5] dt-bindings: Add compatible string opencores,gpio to gpio-mmio Stafford Horne
2025-12-18 0:55 ` Conor Dooley
2026-01-03 5:55 ` Stafford Horne
2026-01-07 14:17 ` Linus Walleij
2026-01-07 14:35 ` Geert Uytterhoeven
2025-12-17 8:08 ` [PATCH v2 2/5] openrisc: dts: Add de0 nano config and devicetree Stafford Horne
2025-12-18 18:36 ` Geert Uytterhoeven
2026-01-03 6:16 ` Stafford Horne
2026-01-05 11:02 ` Geert Uytterhoeven
2026-01-06 9:54 ` Stafford Horne
2026-01-06 10:18 ` Geert Uytterhoeven
2025-12-17 8:08 ` [PATCH v2 4/5] openrisc: dts: Split simple smp dts to dts and dtsi Stafford Horne
2025-12-18 18:37 ` Geert Uytterhoeven
2026-01-03 6:13 ` Stafford Horne
2025-12-17 8:08 ` Stafford Horne [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251217080843.70621-6-shorne@gmail.com \
--to=shorne@gmail.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jonas@southpole.se \
--cc=krzk+dt@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-openrisc@vger.kernel.org \
--cc=robh@kernel.org \
--cc=stefan.kristiansson@saunalahti.fi \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).