From: Francesco Dolcini <francesco@dolcini.it>
To: Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>
Cc: Francesco Dolcini <francesco.dolcini@toradex.com>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
imx@lists.linux.dev, linux-arm-kernel@lists.infradead.org
Subject: [PATCH v1 4/4] arm64: dts: freescale: Add Apalis iMX8QP
Date: Tue, 23 Dec 2025 17:28:30 +0100 [thread overview]
Message-ID: <20251223162833.138286-5-francesco@dolcini.it> (raw)
In-Reply-To: <20251223162833.138286-1-francesco@dolcini.it>
From: Francesco Dolcini <francesco.dolcini@toradex.com>
Add support for the Apalis iMX8QP SoM mated with Apalis Ixora and Apalis
Evaluation board.
Apalis iMX8QP is a variant of the Apalis iMX8QM, using an NXP i.MX8QP
SoC instead of the i.MX8QM. The two SoCs are pin to pin compatible, with
the i.MX8QP being a lower end variant, with a slower GPU and one Cortex
A72 core instead of two.
The two Apalis SoMs variants share the same schematics and PCB, and the
iMX8QP variant exists only on revision V1.1 of board.
Link: https://www.nxp.com/products/i.MX8
Link: https://www.toradex.com/computer-on-modules/apalis-arm-family/nxp-imx-8
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
---
arch/arm64/boot/dts/freescale/Makefile | 5 ++++
.../imx8qp-apalis-v1.1-eval-v1.2.dts | 26 +++++++++++++++++++
.../dts/freescale/imx8qp-apalis-v1.1-eval.dts | 16 ++++++++++++
.../imx8qp-apalis-v1.1-ixora-v1.1.dts | 16 ++++++++++++
.../imx8qp-apalis-v1.1-ixora-v1.2.dts | 16 ++++++++++++
.../dts/freescale/imx8qp-apalis-v1.1.dtsi | 16 ++++++++++++
6 files changed, 95 insertions(+)
create mode 100644 arch/arm64/boot/dts/freescale/imx8qp-apalis-v1.1-eval-v1.2.dts
create mode 100644 arch/arm64/boot/dts/freescale/imx8qp-apalis-v1.1-eval.dts
create mode 100644 arch/arm64/boot/dts/freescale/imx8qp-apalis-v1.1-ixora-v1.1.dts
create mode 100644 arch/arm64/boot/dts/freescale/imx8qp-apalis-v1.1-ixora-v1.2.dts
create mode 100644 arch/arm64/boot/dts/freescale/imx8qp-apalis-v1.1.dtsi
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index f30d3fd724d0..61c7f0383f91 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -350,6 +350,11 @@ dtb-${CONFIG_ARCH_MXC} += imx8qm-mek-ov5640-csi1.dtb
imx8qm-mek-ov5640-dual-dtbs := imx8qm-mek.dtb imx8qm-mek-ov5640-csi0.dtbo imx8qm-mek-ov5640-csi1.dtbo
dtb-${CONFIG_ARCH_MXC} += imx8qm-mek-ov5640-dual.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8qp-apalis-v1.1-eval.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8qp-apalis-v1.1-eval-v1.2.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8qp-apalis-v1.1-ixora-v1.1.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8qp-apalis-v1.1-ixora-v1.2.dtb
+
dtb-$(CONFIG_ARCH_MXC) += imx8qxp-ai_ml.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8qxp-colibri-aster.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8qxp-colibri-eval-v3.dtb
diff --git a/arch/arm64/boot/dts/freescale/imx8qp-apalis-v1.1-eval-v1.2.dts b/arch/arm64/boot/dts/freescale/imx8qp-apalis-v1.1-eval-v1.2.dts
new file mode 100644
index 000000000000..b5318de67cb0
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qp-apalis-v1.1-eval-v1.2.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2024 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8qp-apalis-v1.1.dtsi"
+#include "imx8-apalis-eval-v1.2.dtsi"
+
+/ {
+ model = "Toradex Apalis iMX8QP V1.1 on Apalis Evaluation Board V1.2";
+ compatible = "toradex,apalis-imx8-v1.1-eval-v1.2",
+ "toradex,apalis-imx8-v1.1",
+ "fsl,imx8qp";
+};
+
+/* Apalis MMC1 */
+&usdhc2 {
+ /delete-property/ no-1-8-v;
+};
+
+/* Apalis SD1 */
+&usdhc3 {
+ /delete-property/ no-1-8-v;
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qp-apalis-v1.1-eval.dts b/arch/arm64/boot/dts/freescale/imx8qp-apalis-v1.1-eval.dts
new file mode 100644
index 000000000000..d558cff2582f
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qp-apalis-v1.1-eval.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8qp-apalis-v1.1.dtsi"
+#include "imx8-apalis-eval-v1.1.dtsi"
+
+/ {
+ model = "Toradex Apalis iMX8QP V1.1 on Apalis Evaluation Board";
+ compatible = "toradex,apalis-imx8-v1.1-eval",
+ "toradex,apalis-imx8-v1.1",
+ "fsl,imx8qp";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qp-apalis-v1.1-ixora-v1.1.dts b/arch/arm64/boot/dts/freescale/imx8qp-apalis-v1.1-ixora-v1.1.dts
new file mode 100644
index 000000000000..a73a6324f552
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qp-apalis-v1.1-ixora-v1.1.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8qp-apalis-v1.1.dtsi"
+#include "imx8-apalis-ixora-v1.1.dtsi"
+
+/ {
+ model = "Toradex Apalis iMX8QP V1.1 on Apalis Ixora V1.1 Carrier Board";
+ compatible = "toradex,apalis-imx8-v1.1-ixora-v1.1",
+ "toradex,apalis-imx8-v1.1",
+ "fsl,imx8qp";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qp-apalis-v1.1-ixora-v1.2.dts b/arch/arm64/boot/dts/freescale/imx8qp-apalis-v1.1-ixora-v1.2.dts
new file mode 100644
index 000000000000..71568d7ec8e5
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qp-apalis-v1.1-ixora-v1.2.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8qp-apalis-v1.1.dtsi"
+#include "imx8-apalis-ixora-v1.2.dtsi"
+
+/ {
+ model = "Toradex Apalis iMX8QP V1.1 on Apalis Ixora V1.2 Carrier Board";
+ compatible = "toradex,apalis-imx8-v1.1-ixora-v1.2",
+ "toradex,apalis-imx8-v1.1",
+ "fsl,imx8qp";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qp-apalis-v1.1.dtsi b/arch/arm64/boot/dts/freescale/imx8qp-apalis-v1.1.dtsi
new file mode 100644
index 000000000000..1e5311512344
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qp-apalis-v1.1.dtsi
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+#include "imx8qp.dtsi"
+#include "imx8-apalis-v1.1.dtsi"
+
+&cooling_maps_map0 {
+ cooling-device =
+ <&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&A72_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+};
--
2.47.3
next prev parent reply other threads:[~2025-12-23 16:28 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-12-23 16:28 [PATCH v1 0/4] arm64: dts: freescale: Add Apalis iMX8QP Francesco Dolcini
2025-12-23 16:28 ` [PATCH v1 1/4] dt-bindings: arm: fsl: " Francesco Dolcini
2025-12-27 13:02 ` Krzysztof Kozlowski
2025-12-23 16:28 ` [PATCH v1 2/4] arm64: dts: imx8qm: Add CPU cluster labels Francesco Dolcini
2025-12-23 16:28 ` [PATCH v1 3/4] arm64: dts: freescale: Add NXP i.MX8QP SoC dtsi Francesco Dolcini
2025-12-23 16:28 ` Francesco Dolcini [this message]
2025-12-30 13:16 ` [PATCH v1 0/4] arm64: dts: freescale: Add Apalis iMX8QP Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251223162833.138286-5-francesco@dolcini.it \
--to=francesco@dolcini.it \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=francesco.dolcini@toradex.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox