Re: [PATCH v2 04/11] dt-bindings: display: panel: Describe Samsung SOFEF01-M DDIC

[Rob Herring <robh@kernel.org>]

On Mon, Dec 22, 2025 at 12:32:10AM +0100, Marijn Suijten wrote:
> Document the Samsung SOFEF01-M Display-Driver-IC and 1080x2520@60Hz
> command-mode DSI panels found in many Sony phones:
> - Sony Xperia 5 (kumano bahamut): amb609tc01
> - Sony Xperia 10 II (seine pdx201): ams597ut01
> - Sony Xperia 10 III (lena pdx213): ams597ut04
> - Sony Xperia 10 IV (murray pdx225): ams597ut05
> - Sony Xperia 10 V (zambezi pdx235): ams605dk01
> - Sony Xperia 10 VI (columbia pdx246): ams605dk01
> 
> Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
> ---
>  .../bindings/display/panel/samsung,sofef01-m.yaml  | 120 +++++++++++++++++++++
>  MAINTAINERS                                        |   5 +
>  2 files changed, 125 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/display/panel/samsung,sofef01-m.yaml b/Documentation/devicetree/bindings/display/panel/samsung,sofef01-m.yaml
> new file mode 100644
> index 000000000000..a8ff5223677c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/panel/samsung,sofef01-m.yaml
> @@ -0,0 +1,120 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/panel/samsung,sofef01-m.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Samsung SOFEF01-M DDI for 1080x2520@60Hz 6.0"/6.1" OLED DSI panels
> +
> +maintainers:
> +  - Marijn Suijten <marijn.suijten@somainline.org>
> +
> +description: |
> +  Samsung SOFEF01-M Display-Driver-IC found in multiple Sony smartphones, paired with
> +  the following panel:
> +   - Sony Xperia 5 (kumano bahamut): amb609tc01
> +   - Sony Xperia 10 II (seine pdx201): ams597ut01
> +   - Sony Xperia 10 III (lena pdx213): ams597ut04
> +   - Sony Xperia 10 IV (murray pdx225): ams597ut05
> +   - Sony Xperia 10 V (zambezi pdx235): ams605dk01
> +   - Sony Xperia 10 VI (columbia pdx246): ams605dk01
> +
> +  The assembly features a Samsung touchscreen compatible with
> +  samsung,s6sy761.
> +
> +allOf:
> +  - $ref: panel-common.yaml#
> +
> +  - if:
> +      properties:
> +        compatible:
> +          const: samsung,sofef01-m-amb609tc01
> +    then:
> +      properties:
> +        vci-supply:
> +          description: DisplayIC Operation supply (3.0V)

The error reported is on the wrong patch. Not sure why, but the problem 
is here. With 'additionalProperties: false', this property is not 
factored in and is considered unknown. That can be fixed using 
'unevaluatedProperties', but instead, move this to the top level 
'properties'.

> +
> +      required:
> +        - vci-supply
> +
> +    else:
> +      properties:
> +        vci-supply: false
> +
> +properties:
> +  compatible:
> +    enum:
> +      - samsung,sofef01-m-amb609tc01 # 6.1"
> +      - samsung,sofef01-m-ams597ut01 # 6.0"
> +      - samsung,sofef01-m-ams597ut04 # 6.0"
> +      - samsung,sofef01-m-ams597ut05 # 6.0"
> +      - samsung,sofef01-m-ams605dk01 # 6.1"
> +
> +  port: true
> +
> +  reg:
> +    maxItems: 1
> +    description: DSI virtual channel
> +
> +  reset-gpios: true
> +
> +  vddio-supply:
> +    description: I/O voltage supply (1.8V)
> +
> +required:
> +  - compatible
> +  - port
> +  - reg
> +  - reset-gpios
> +  - vddio-supply
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +
> +    dsi {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +        panel@0 {
> +            compatible = "samsung,sofef01-m-amb609tc01";
> +            reg = <0>;
> +
> +            reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
> +
> +            vci-supply = <&vreg_l17a_3p0>;
> +            vddio-supply = <&vreg_l14a_1p8>;
> +
> +            port {
> +                endpoint {
> +                    remote-endpoint = <&dsi0_out>;
> +                };
> +            };
> +        };
> +    };
> +
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +
> +    dsi {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +        panel@0 {
> +            compatible = "samsung,sofef01-m-ams597ut01";
> +            reg = <0>;
> +
> +            reset-gpios = <&tlmm 90 GPIO_ACTIVE_LOW>;
> +
> +            vddio-supply = <&pm6125_l12>;
> +
> +            port {
> +                endpoint {
> +                    remote-endpoint = <&dsi0_out>;
> +                };
> +            };
> +        };
> +    };

The first example is enough.