From: Mithil Bavishi <bavishimithil@gmail.com>
To: aaro.koskinen@iki.fi, andreas@kemnade.info, khilman@baylibre.com,
rogerq@kernel.org, tony@atomide.com, robh@kernel.org,
krzk+dt@kernel.org, conor+dt@kernel.org,
neil.armstrong@linaro.org, rfoss@kernel.org,
laurent.pinchart@ideasonboard.com, jonas@kwiboo.se,
jernej.skrabec@gmail.com, maarten.lankhorst@linux.intel.com,
mripard@kernel.org, tzimmermann@suse.de, airlied@gmail.com,
simona@ffwll.ch, quic_jesszhan@quicinc.com,
bavishimithil@gmail.com, prabhakar.mahadev-lad.rj@bp.renesas.com,
thierry.reding@gmail.com
Cc: linux-omap@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
linux-hardening@vger.kernel.org
Subject: [PATCH v4 01/10] ARM: dts: twl6032: Add DTS file for TWL6032 PMIC
Date: Sun, 18 Jan 2026 22:40:25 -0500 [thread overview]
Message-ID: <20260119034025.58091-2-bavishimithil@gmail.com> (raw)
In-Reply-To: <20260119034025.58091-1-bavishimithil@gmail.com>
Add a dedicated DTS file for the TWL6032 PMIC (Phoenix Lite). Already
has driver support with TWL6030 (Phoenix) since both of them are so
similar, some nodes can be reused from TWL6030 as well.
This can be included in the board files like twl6030.
Example:
...
&i2c1 {
twl: twl@48 {
reg = <0x48>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
interrupt-parent = <&gic>;
};
};
/include/ "twl6032.dtsi"
...
Used in devices like samsung-espresso, amazon-jem, epson-embt2ws etc.
Signed-off-by: Mithil Bavishi <bavishimithil@gmail.com>
---
arch/arm/boot/dts/ti/omap/twl6032.dtsi | 77 ++++++++++++++++++++++++++
1 file changed, 77 insertions(+)
create mode 100644 arch/arm/boot/dts/ti/omap/twl6032.dtsi
diff --git a/arch/arm/boot/dts/ti/omap/twl6032.dtsi b/arch/arm/boot/dts/ti/omap/twl6032.dtsi
new file mode 100644
index 000000000..d599a2ca6
--- /dev/null
+++ b/arch/arm/boot/dts/ti/omap/twl6032.dtsi
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Integrated Power Management Chip
+ * https://www.ti.com/lit/ds/symlink/twl6032.pdf
+ */
+
+&twl {
+ compatible = "ti,twl6032";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ rtc {
+ compatible = "ti,twl4030-rtc";
+ interrupts = <11>;
+ };
+
+ vio: regulator-vio {
+ compatible = "ti,twl6032-vio";
+ };
+
+ ldo1: regulator-ldo1 {
+ compatible = "ti,twl6032-ldo1";
+ };
+
+ ldo2: regulator-ldo2 {
+ compatible = "ti,twl6032-ldo2";
+ };
+
+ ldo3: regulator-ldo3 {
+ compatible = "ti,twl6032-ldo3";
+ };
+
+ ldo4: regulator-ldo4 {
+ compatible = "ti,twl6032-ldo4";
+ };
+
+ ldo5: regulator-ldo5 {
+ compatible = "ti,twl6032-ldo5";
+ };
+
+ ldo6: regulator-ldo6 {
+ compatible = "ti,twl6032-ldo6";
+ };
+
+ ldoln: regulator-ldoln {
+ compatible = "ti,twl6032-ldoln";
+ };
+
+ ldousb: regulator-ldousb {
+ compatible = "ti,twl6032-ldousb";
+ };
+
+ smps4: regulator-smps4 {
+ compatible = "ti,twl6032-smps4";
+ };
+
+ gpadc: gpadc {
+ compatible = "ti,twl6032-gpadc";
+ interrupts = <3>;
+ #io-channel-cells = <1>;
+ };
+
+ twl_usb_comparator: usb-comparator {
+ compatible = "ti,twl6030-usb";
+ interrupts = <4>, <10>;
+ };
+
+ twl_pwm: pwm {
+ compatible = "ti,twl6030-pwm";
+ #pwm-cells = <2>;
+ };
+
+ twl_pwmled: pwmled {
+ compatible = "ti,twl6030-pwmled";
+ #pwm-cells = <2>;
+ };
+};
--
2.43.0
next prev parent reply other threads:[~2026-01-19 5:33 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-01-19 3:40 Mithil Bavishi
2026-01-19 3:40 ` Mithil Bavishi [this message]
-- strict thread matches above, loose matches on Subject: below --
2026-01-19 3:30 [PATCH v4 00/10] Initial support for Samsung Galaxy Tab 2 series Mithil Bavishi
2026-01-19 3:30 ` [PATCH v4 01/10] ARM: dts: twl6032: Add DTS file for TWL6032 PMIC Mithil Bavishi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260119034025.58091-2-bavishimithil@gmail.com \
--to=bavishimithil@gmail.com \
--cc=aaro.koskinen@iki.fi \
--cc=airlied@gmail.com \
--cc=andreas@kemnade.info \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=jernej.skrabec@gmail.com \
--cc=jonas@kwiboo.se \
--cc=khilman@baylibre.com \
--cc=krzk+dt@kernel.org \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-hardening@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=maarten.lankhorst@linux.intel.com \
--cc=mripard@kernel.org \
--cc=neil.armstrong@linaro.org \
--cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
--cc=quic_jesszhan@quicinc.com \
--cc=rfoss@kernel.org \
--cc=robh@kernel.org \
--cc=rogerq@kernel.org \
--cc=simona@ffwll.ch \
--cc=thierry.reding@gmail.com \
--cc=tony@atomide.com \
--cc=tzimmermann@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox