Re: [PATCH 2/4] dt-bindings: mfd: spacemit,p1: Add individual regulator supply properties

[Rob Herring <robh@kernel.org>]

On Thu, Jan 22, 2026 at 05:43:43PM +0800, Guodong Xu wrote:
> Add supply properties that match the P1 PMIC's actual hardware topology
> where each buck converter has its own VIN pin and LDO groups share
> common input pins. Supply names are defined according to the pinout
> names in the P1 datasheet.
> 
> This allows different boards to describe their actual
> power tree connections in devicetree rather than hardcoding supply
> relationships in the driver.
> 
> Signed-off-by: Guodong Xu <guodong@riscstar.com>
> ---
>  .../devicetree/bindings/mfd/spacemit,p1.yaml       | 58 +++++++++++++++++++++-
>  1 file changed, 56 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/mfd/spacemit,p1.yaml b/Documentation/devicetree/bindings/mfd/spacemit,p1.yaml
> index c6593ac6ef6adb72fc48af570dc13fc9edf77ccb..abdc93b9a67b1872c8fe6955abd950622a0b69e8 100644
> --- a/Documentation/devicetree/bindings/mfd/spacemit,p1.yaml
> +++ b/Documentation/devicetree/bindings/mfd/spacemit,p1.yaml
> @@ -27,8 +27,41 @@ properties:
>    interrupts:
>      maxItems: 1
>  
> -  vin-supply:
> -    description: Input supply phandle.
> +  vin1-supply:
> +    description:
> +      Power supply for BUCK1. Required if BUCK1 is defined.
> +
> +  vin2-supply:
> +    description:
> +      Power supply for BUCK2. Required if BUCK2 is defined.
> +
> +  vin3-supply:
> +    description:
> +      Power supply for BUCK3. Required if BUCK3 is defined.
> +
> +  vin4-supply:
> +    description:
> +      Power supply for BUCK4. Required if BUCK4 is defined.
> +
> +  vin5-supply:
> +    description:
> +      Power supply for BUCK5. Required if BUCK5 is defined.
> +
> +  vin6-supply:
> +    description:
> +      Power supply for BUCK6. Required if BUCK6 is defined.
> +
> +  aldoin-supply:
> +    description:
> +      Power supply for ALDO1-4. Required if any are defined.
> +
> +  dldoin1-supply:
> +    description:
> +      Power supply for DLDO1-4. Required if any are defined.
> +
> +  dldoin2-supply:
> +    description:
> +      Power supply for DLDO5-7. Required if any are defined.
>  
>    regulators:
>      type: object
> @@ -50,6 +83,15 @@ unevaluatedProperties: false
>  
>  examples:
>    - |
> +    / {
> +        reg_vcc_5v: regulator-vcc-5v {
> +            compatible = "regulator-fixed";
> +            regulator-name = "vcc_5v";
> +            regulator-min-microvolt = <5000000>;
> +            regulator-max-microvolt = <5000000>;
> +        };
> +    };

Don't put providers into the examples of consumers.

Rob