From: Sen Wang <sen@ti.com>
To: <peter.ujfalusi@gmail.com>, <broonie@kernel.org>,
<lgirdwood@gmail.com>, <perex@perex.cz>, <tiwai@suse.com>,
<robh@kernel.org>, <krzk+dt@kernel.org>, <conor+dt@kernel.org>
Cc: <linux-sound@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, Sen Wang <sen@ti.com>
Subject: [PATCH v2 3/4] ASoC: ti: davinci-mcasp: Streamline pdir behavior across rx & tx streams
Date: Mon, 2 Feb 2026 18:37:02 -0600 [thread overview]
Message-ID: <20260203003703.2334443-4-sen@ti.com> (raw)
In-Reply-To: <20260203003703.2334443-1-sen@ti.com>
Simplify the mcasp_set_clk_pdir caller convention in start/stop stream
function, to make it so that set_clk_pdir gets called regardless when
stream starts and also disables when stream ends.
Functionality-wise, everything remains the same as the previously skipped
calls are now either correctly configured
(when McASP is SND_SOC_DAIFMT_BP_FC - pdir needs to be enabled)
or called with a bitmask of zero (when McASP is SND_SOC_DAIFMT_BC_FC - pdir
gets disabled).
On brief regarding McASP Clock and Frame sync configurations, refer to [0].
[0]:TRM Section 12.1.1.4.2 https://www.ti.com/lit/ug/sprujd4a/sprujd4a.pdf
Signed-off-by: Sen Wang <sen@ti.com>
---
v2:
- Retained original order of operation in mcasp_stop_rx()
sound/soc/ti/davinci-mcasp.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/sound/soc/ti/davinci-mcasp.c b/sound/soc/ti/davinci-mcasp.c
index aa14fc1c8011..f9015b50e99d 100644
--- a/sound/soc/ti/davinci-mcasp.c
+++ b/sound/soc/ti/davinci-mcasp.c
@@ -235,8 +235,8 @@ static void mcasp_start_rx(struct davinci_mcasp *mcasp)
if (mcasp_is_frame_producer(mcasp) && mcasp_is_synchronous(mcasp)) {
mcasp_set_ctl_reg(mcasp, DAVINCI_MCASP_GBLCTLX_REG, TXHCLKRST);
mcasp_set_ctl_reg(mcasp, DAVINCI_MCASP_GBLCTLX_REG, TXCLKRST);
- mcasp_set_clk_pdir(mcasp, true);
}
+ mcasp_set_clk_pdir(mcasp, true);
/* Activate serializer(s) */
mcasp_set_reg(mcasp, DAVINCI_MCASP_RXSTAT_REG, 0xFFFFFFFF);
@@ -311,10 +311,10 @@ static void mcasp_stop_rx(struct davinci_mcasp *mcasp)
* In synchronous mode stop the TX clocks if no other stream is
* running
*/
- if (mcasp_is_frame_producer(mcasp) && mcasp_is_synchronous(mcasp) && !mcasp->streams) {
+ if (!mcasp->streams)
mcasp_set_clk_pdir(mcasp, false);
+ if (mcasp_is_frame_producer(mcasp) && mcasp_is_synchronous(mcasp) && !mcasp->streams)
mcasp_set_reg(mcasp, DAVINCI_MCASP_GBLCTLX_REG, 0);
- }
mcasp_set_reg(mcasp, DAVINCI_MCASP_GBLCTLR_REG, 0);
mcasp_set_reg(mcasp, DAVINCI_MCASP_RXSTAT_REG, 0xFFFFFFFF);
@@ -340,7 +340,7 @@ static void mcasp_stop_tx(struct davinci_mcasp *mcasp)
*/
if (mcasp_is_frame_producer(mcasp) && mcasp_is_synchronous(mcasp) && mcasp->streams)
val = TXHCLKRST | TXCLKRST | TXFSRST;
- else
+ if (!mcasp->streams)
mcasp_set_clk_pdir(mcasp, false);
--
2.43.0
next prev parent reply other threads:[~2026-02-03 0:39 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-02-03 0:36 [PATCH v2 0/4] ASoC: ti: davinci-mcasp: Add asynchronous mode support for McASP Sen Wang
2026-02-03 0:37 ` [PATCH v2 1/4] ASoC: dt-bindings: davinci-mcasp: Add properties for asynchronous mode Sen Wang
2026-02-03 0:37 ` [PATCH v2 2/4] ASoC: ti: davinci-mcasp: Disambiguate mcasp_is_synchronous function Sen Wang
2026-02-03 0:37 ` Sen Wang [this message]
2026-02-03 0:37 ` [PATCH v2 4/4] ASoC: ti: davinci-mcasp: Add asynchronous mode support Sen Wang
2026-02-04 11:44 ` [PATCH v2 0/4] ASoC: ti: davinci-mcasp: Add asynchronous mode support for McASP Paresh Bhagat
2026-02-04 16:05 ` Péter Ujfalusi
2026-02-05 11:04 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260203003703.2334443-4-sen@ti.com \
--to=sen@ti.com \
--cc=broonie@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=perex@perex.cz \
--cc=peter.ujfalusi@gmail.com \
--cc=robh@kernel.org \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox