public inbox for devicetree@vger.kernel.org
 help / color / mirror / Atom feed
From: Fabio Estevam <festevam@gmail.com>
To: heiko@sntech.de
Cc: robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-rockchip@lists.infradead.org,
	Fabio Estevam <festevam@nabladev.com>
Subject: [PATCH 11/11] ARM: dts: rockchip: Add Onion RV1103B Omega4
Date: Fri,  6 Feb 2026 15:42:27 -0300	[thread overview]
Message-ID: <20260206184227.2702488-1-festevam@gmail.com> (raw)

From: Fabio Estevam <festevam@nabladev.com>

Onion Omega4 board is a board based on the RV1103B SoC that has:

 - 256 MB of RAM
 - 256 MB of SPI-NAND
 - Ethernet
 - USB OTG
 - Wifi
 - SD card
 - Camera connector

Add the initial support for this board so that it can fully boot into
Linux with the root file system stored in the SPI NAND.

Signed-off-by: Fabio Estevam <festevam@nabladev.com>
---
 arch/arm/boot/dts/rockchip/Makefile           |  1 +
 arch/arm/boot/dts/rockchip/rv1103b-omega4.dts | 92 +++++++++++++++++++
 2 files changed, 93 insertions(+)
 create mode 100644 arch/arm/boot/dts/rockchip/rv1103b-omega4.dts

diff --git a/arch/arm/boot/dts/rockchip/Makefile b/arch/arm/boot/dts/rockchip/Makefile
index 716f5540e438..d8cd5df138cc 100644
--- a/arch/arm/boot/dts/rockchip/Makefile
+++ b/arch/arm/boot/dts/rockchip/Makefile
@@ -1,5 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0
 dtb-$(CONFIG_ARCH_ROCKCHIP) += \
+	rv1103b-omega4.dtb \
 	rv1108-elgin-r1.dtb \
 	rv1108-evb.dtb \
 	rv1109-relfor-saib.dtb \
diff --git a/arch/arm/boot/dts/rockchip/rv1103b-omega4.dts b/arch/arm/boot/dts/rockchip/rv1103b-omega4.dts
new file mode 100644
index 000000000000..512b063bceb1
--- /dev/null
+++ b/arch/arm/boot/dts/rockchip/rv1103b-omega4.dts
@@ -0,0 +1,92 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2022 Rockchip Electronics Co., Ltd.
+ * Copyright (c) 2025 plan44.ch/luz
+ * Copyright (c) 2025 Onion Corporation
+ */
+
+/dts-v1/;
+
+#include "rv1103b.dtsi"
+
+/ {
+	model = "Onion RV1103 Omega4 Board";
+	compatible = "onion,rv1103b-omega4", "rockchip,rv1103b";
+
+	chosen {
+		stdout-path = &uart0;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x10000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0	{
+			gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
+			label = "sys";
+			default-state = "on";
+		};
+	};
+};
+
+&fspi0 {
+	bootph-all;
+	status = "okay";
+
+	flash@0 {
+		compatible = "spi-nand";
+		reg = <0>;
+		spi-max-frequency = <75000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "env";
+				reg = <0x00000000 0x00040000>;
+			};
+
+			partition@40000 {
+				label = "idblock";
+				reg = <0x00040000 0x00100000>;
+				read-only;
+			};
+
+			partition@140000 {
+				label = "uboot";
+				reg = <0x00140000 0x00100000>;
+				read-only;
+			};
+
+			partition@240000 {
+				label = "boot";
+				reg = <0x00240000 0x00800000>;
+			};
+
+			partition@a40000 {
+				label = "ubi";
+				reg = <0x00a40000 0x0f5c0000>;
+			};
+		};
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0m0_xfer_pins>;
+	bootph-all;
+	status = "okay";
+};
+
+&wdt {
+	bootph-all;
+	status = "okay";
+};
-- 
2.34.1


             reply	other threads:[~2026-02-06 20:40 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-02-06 18:42 Fabio Estevam [this message]
  -- strict thread matches above, loose matches on Subject: below --
2026-02-06 18:37 [PATCH 11/11] ARM: dts: rockchip: Add Onion RV1103B Omega4 Fabio Estevam
2026-02-06 18:12 [PATCH 00/11] ARM: rockchip: Add initial RV1103B and Omega4 board support Fabio Estevam
2026-02-06 18:13 ` [PATCH 11/11] ARM: dts: rockchip: Add Onion RV1103B Omega4 Fabio Estevam
2026-02-06 20:50   ` Jonas Karlman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260206184227.2702488-1-festevam@gmail.com \
    --to=festevam@gmail.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@nabladev.com \
    --cc=heiko@sntech.de \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox