From: Richard Acayan <mailingradian@gmail.com>
To: Srinivas Kandagatla <srini@kernel.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Wesley Cheng <quic_wcheng@quicinc.com>,
Johan Hovold <johan@kernel.org>,
Konrad Dybcio <konradybcio@kernel.org>,
linux-arm-msm@vger.kernel.org, linux-sound@vger.kernel.org,
devicetree@vger.kernel.org
Cc: Nickolay Goppen <setotau@mainlining.org>,
Richard Acayan <mailingradian@gmail.com>
Subject: [PATCH 07/10] ASoC: qdsp6: q6afe-dai: add internal mi2s support
Date: Tue, 10 Feb 2026 21:02:59 -0500 [thread overview]
Message-ID: <20260211020302.2674-8-mailingradian@gmail.com> (raw)
In-Reply-To: <20260211020302.2674-1-mailingradian@gmail.com>
Add the internal MI2S ports found on the SDM660 internal sound card.
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
---
sound/soc/qcom/qdsp6/q6afe-dai.c | 46 ++++++++++++++++++++++++++++++++
1 file changed, 46 insertions(+)
diff --git a/sound/soc/qcom/qdsp6/q6afe-dai.c b/sound/soc/qcom/qdsp6/q6afe-dai.c
index 0f47aadaabe1..dfe964b1a341 100644
--- a/sound/soc/qcom/qdsp6/q6afe-dai.c
+++ b/sound/soc/qcom/qdsp6/q6afe-dai.c
@@ -411,6 +411,7 @@ static int q6afe_dai_prepare(struct snd_pcm_substream *substream,
break;
case QUINARY_MI2S_RX ... QUINARY_MI2S_TX:
case PRIMARY_MI2S_RX ... QUATERNARY_MI2S_TX:
+ case INT0_MI2S_RX ... INT6_MI2S_TX:
rc = q6afe_i2s_port_prepare(dai_data->port[dai->id],
&dai_data->port_config[dai->id].i2s_cfg);
if (rc < 0) {
@@ -662,6 +663,21 @@ static const struct snd_soc_dapm_route q6afe_dapm_routes[] = {
/* USB playback AFE port receives data for playback, hence use the RX port */
{"USB Playback", NULL, "USB_RX"},
+
+ {"INT0 MI2S Playback", NULL, "INT0_MI2S_RX"},
+ {"INT0_MI2S_TX", NULL, "INT0 MI2S Capture"},
+ {"INT1 MI2S Playback", NULL, "INT1_MI2S_RX"},
+ {"INT1_MI2S_TX", NULL, "INT1 MI2S Capture"},
+ {"INT2 MI2S Playback", NULL, "INT2_MI2S_RX"},
+ {"INT2_MI2S_TX", NULL, "INT2 MI2S Capture"},
+ {"INT3 MI2S Playback", NULL, "INT3_MI2S_RX"},
+ {"INT3_MI2S_TX", NULL, "INT3 MI2S Capture"},
+ {"INT4 MI2S Playback", NULL, "INT4_MI2S_RX"},
+ {"INT4_MI2S_TX", NULL, "INT4 MI2S Capture"},
+ {"INT5 MI2S Playback", NULL, "INT5_MI2S_RX"},
+ {"INT5_MI2S_TX", NULL, "INT5 MI2S Capture"},
+ {"INT6 MI2S Playback", NULL, "INT6_MI2S_RX"},
+ {"INT6_MI2S_TX", NULL, "INT6 MI2S Capture"},
};
static int msm_dai_q6_dai_probe(struct snd_soc_dai *dai)
@@ -1006,6 +1022,35 @@ static const struct snd_soc_dapm_widget q6afe_dai_widgets[] = {
0, SND_SOC_NOPM, 0, 0),
SND_SOC_DAPM_AIF_IN("USB_RX", NULL, 0, SND_SOC_NOPM, 0, 0),
+
+ SND_SOC_DAPM_AIF_IN("INT0_MI2S_RX", "NULL",
+ 0, SND_SOC_NOPM, 0, 0),
+ SND_SOC_DAPM_AIF_OUT("INT0_MI2S_TX", "NULL",
+ 0, SND_SOC_NOPM, 0, 0),
+ SND_SOC_DAPM_AIF_IN("INT1_MI2S_RX", "NULL",
+ 0, SND_SOC_NOPM, 0, 0),
+ SND_SOC_DAPM_AIF_OUT("INT1_MI2S_TX", "NULL",
+ 0, SND_SOC_NOPM, 0, 0),
+ SND_SOC_DAPM_AIF_IN("INT2_MI2S_RX", "NULL",
+ 0, SND_SOC_NOPM, 0, 0),
+ SND_SOC_DAPM_AIF_OUT("INT2_MI2S_TX", "NULL",
+ 0, SND_SOC_NOPM, 0, 0),
+ SND_SOC_DAPM_AIF_IN("INT3_MI2S_RX", "NULL",
+ 0, SND_SOC_NOPM, 0, 0),
+ SND_SOC_DAPM_AIF_OUT("INT3_MI2S_TX", "NULL",
+ 0, SND_SOC_NOPM, 0, 0),
+ SND_SOC_DAPM_AIF_IN("INT4_MI2S_RX", "NULL",
+ 0, SND_SOC_NOPM, 0, 0),
+ SND_SOC_DAPM_AIF_OUT("INT4_MI2S_TX", "NULL",
+ 0, SND_SOC_NOPM, 0, 0),
+ SND_SOC_DAPM_AIF_IN("INT5_MI2S_RX", "NULL",
+ 0, SND_SOC_NOPM, 0, 0),
+ SND_SOC_DAPM_AIF_OUT("INT5_MI2S_TX", "NULL",
+ 0, SND_SOC_NOPM, 0, 0),
+ SND_SOC_DAPM_AIF_IN("INT6_MI2S_RX", "NULL",
+ 0, SND_SOC_NOPM, 0, 0),
+ SND_SOC_DAPM_AIF_OUT("INT6_MI2S_TX", "NULL",
+ 0, SND_SOC_NOPM, 0, 0),
};
static const struct snd_soc_component_driver q6afe_dai_component = {
@@ -1039,6 +1084,7 @@ static void of_q6afe_parse_dai_data(struct device *dev,
/* MI2S specific properties */
case QUINARY_MI2S_RX ... QUINARY_MI2S_TX:
case PRIMARY_MI2S_RX ... QUATERNARY_MI2S_TX:
+ case INT0_MI2S_RX ... INT6_MI2S_TX:
priv = &data->priv[id];
ret = of_property_read_variable_u32_array(node,
"qcom,sd-lines",
--
2.53.0
next prev parent reply other threads:[~2026-02-11 2:03 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-02-11 2:02 [PATCH 00/10] SDM660 internal sound card support Richard Acayan
2026-02-11 2:02 ` [PATCH 01/10] ASoC: dt-bindings: qcom,sm8250: add compatible for sdm660-internal Richard Acayan
2026-02-11 2:11 ` Dmitry Baryshkov
2026-02-11 6:51 ` Krzysztof Kozlowski
2026-02-11 21:55 ` Nickolay Goppen
2026-02-12 7:16 ` Krzysztof Kozlowski
2026-02-12 9:34 ` Konrad Dybcio
2026-02-14 3:38 ` Richard Acayan
2026-02-16 10:53 ` Konrad Dybcio
2026-02-16 13:57 ` Dmitry Baryshkov
2026-02-16 14:32 ` Konrad Dybcio
2026-02-24 2:05 ` Richard Acayan
2026-02-11 2:02 ` [PATCH 02/10] ASoC: dt-bindings: qcom: q6dsp: add internal mi2s support Richard Acayan
2026-02-11 2:02 ` [PATCH 03/10] ASoC: dt-bindings: pm8916-analog-codec: Add PM660L compatible Richard Acayan
2026-02-11 6:54 ` Krzysztof Kozlowski
2026-02-12 9:54 ` Konrad Dybcio
2026-02-11 2:02 ` [PATCH 04/10] ASoC: dt-bindings: msm8916-digital-codec: Add SDM660 compatible Richard Acayan
2026-02-11 6:57 ` Krzysztof Kozlowski
2026-02-11 2:02 ` [PATCH 05/10] ASoC: qdsp6: q6dsp-lpass-ports: add internal mi2s support Richard Acayan
2026-02-11 2:02 ` [PATCH 06/10] ASoC: qdsp6: q6afe: " Richard Acayan
2026-02-11 2:02 ` Richard Acayan [this message]
2026-02-11 2:03 ` [PATCH 08/10] ASoC: qdsp6: q6routing: " Richard Acayan
2026-02-11 2:03 ` [PATCH 09/10] ASoC: qcom: add sdm660 internal sound card support Richard Acayan
2026-02-16 13:34 ` Srinivas Kandagatla
2026-02-20 15:49 ` Richard Acayan
2026-02-11 2:03 ` [PATCH 10/10] ASoC: msm8916-wcd-analog: add quirk for cajon 2.0 Richard Acayan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260211020302.2674-8-mailingradian@gmail.com \
--to=mailingradian@gmail.com \
--cc=broonie@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=johan@kernel.org \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=perex@perex.cz \
--cc=quic_wcheng@quicinc.com \
--cc=robh@kernel.org \
--cc=setotau@mainlining.org \
--cc=srini@kernel.org \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox