Re: [PATCH v2 2/3] phy: k1-usb: add disconnect function support

[Vladimir Oltean <olteanv@gmail.com>]

Hello Yixun,

On Sat, Feb 14, 2026 at 08:29:15PM +0800, Yixun Lan wrote:
> A disconnect status BIT of USB2 PHY need to be cleared, otherwise
> it will fail to work properly during next connection when devices
> connect to roothub directly.
> 
> Fixes: fe4bc1a08638 ("phy: spacemit: support K1 USB2.0 PHY controller")
> Signed-off-by: Yixun Lan <dlan@kernel.org>
> ---
>  drivers/phy/spacemit/phy-k1-usb2.c | 14 ++++++++++++++
>  1 file changed, 14 insertions(+)
> 
> diff --git a/drivers/phy/spacemit/phy-k1-usb2.c b/drivers/phy/spacemit/phy-k1-usb2.c
> index 342061380012..959bf79c7a72 100644
> --- a/drivers/phy/spacemit/phy-k1-usb2.c
> +++ b/drivers/phy/spacemit/phy-k1-usb2.c
> @@ -48,6 +48,9 @@
>  #define  PHY_CLK_HSTXP_EN		BIT(3)		/* clock hstxp enable */
>  #define  PHY_HSTXP_MODE			BIT(4)		/* 0: force en_txp to be 1; 1: no force */
>  
> +#define PHY_K1_HS_HOST_DISC		0x40
> +#define  PHY_K1_HS_HOST_DISC_CLR		BIT(0)
> +
>  #define PHY_PLL_DIV_CFG			0x98
>  #define  PHY_FDIV_FRACT_8_15		GENMASK(7, 0)
>  #define  PHY_FDIV_FRACT_16_19		GENMASK(11, 8)
> @@ -142,9 +145,20 @@ static int spacemit_usb2phy_exit(struct phy *phy)
>  	return 0;
>  }
>  
> +static int spacemit_usb2phy_disconnect(struct phy *phy, int port)
> +{
> +	struct spacemit_usb2phy *sphy = phy_get_drvdata(phy);
> +
> +	regmap_update_bits(sphy->regmap_base, PHY_K1_HS_HOST_DISC,
> +					   PHY_K1_HS_HOST_DISC_CLR, PHY_K1_HS_HOST_DISC_CLR);

Please align function arguments to the open parenthesis.

Since we are in the merge window, it is likely that new features will
not be picked up at this stage.

But this seems to be a fix for existing SpacemiT K1 support, currently
in the linux-phy/next branch. The linux-phy pull request hasn't been
sent yet, so if you can resend just this patch and we can get an ACK for
it in time, perhaps it can be included for v7.0.

The K3 support should be resent after the merge window.

> +
> +	return 0;
> +}
> +
>  static const struct phy_ops spacemit_usb2phy_ops = {
>  	.init = spacemit_usb2phy_init,
>  	.exit = spacemit_usb2phy_exit,
> +	.disconnect = spacemit_usb2phy_disconnect,
>  	.owner = THIS_MODULE,
>  };
>  
> 
> -- 
> 2.52.0
> 
>