[PATCH v2 4/4] arm64: dts: imx8mp-kontron: Use GPIO/IRQ defines in DL devicetree

[Frieder Schrempf <frieder@fris.de>]

From: Frieder Schrempf <frieder.schrempf@kontron.de>

To make the code more readable, use the macros for the GPIO and IRQ
settings.

Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8mp-kontron-dl.dtso | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-kontron-dl.dtso b/arch/arm64/boot/dts/freescale/imx8mp-kontron-dl.dtso
index 7131e9a499ae1..41a2bb74f1565 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-kontron-dl.dtso
+++ b/arch/arm64/boot/dts/freescale/imx8mp-kontron-dl.dtso
@@ -7,6 +7,7 @@
 /plugin/;
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 #include "imx8mp-pinfunc.h"
 
 &{/} {
@@ -80,11 +81,11 @@ touchscreen@5d {
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_touch>;
 		interrupt-parent = <&gpio1>;
-		interrupts = <6 8>;
-		irq-gpios = <&gpio1 6 0>;
+		interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+		irq-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
 		AVDD28-supply = <&reg_vcc_panel>;
 		VDDIO-supply = <&reg_vcc_panel>;
-		reset-gpios = <&gpio1 7 0>;
+		reset-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
 	};
 };
 
-- 
2.52.0