From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from smtp.kernel.org (aws-us-west-2-korg-mail-1.web.codeaurora.org [10.30.226.201]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id BC26E34D39C; Mon, 23 Feb 2026 10:05:10 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=10.30.226.201 ARC-Seal:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1771841110; cv=none; b=Osn6SJ7utT+h9BR4ScjJpz8EtS1BKXhYCe99JagWdW6asmAkU2N48MbzEb2rlgbbkL6VlvDL7TAFq0yXoYTWpCkV7pzqOUjZ3wxu0v4G6i9I5HPMUGUo4pDT3U53muwyUtTFF/tzTOSJ39MhRiBAmYG2WISAHHno6DewfuE6xyY= ARC-Message-Signature:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1771841110; c=relaxed/simple; bh=0YMrV2cevL2my8oUGKDEQ/x1xeXPbxY0fifBbC2gTtA=; h=From:To:Cc:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version; b=bvTbUf7yKbKcyXDNDU5yYhyWnjrGPw/GS5sDTNvaF9rT/9CyibyC5mTiXnnyri2uvbhqvwDNyO8cBuGbykZsEMGjqBoNMopuYi4MpDMd/uuN+yr2BHvNmrpn5ip90ef6Wst44kPqIeLIv99kFtOHO9Ojx9rcH+PfkvmLFEaL9ck= ARC-Authentication-Results:i=1; smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=kernel.org header.i=@kernel.org header.b=GrGq1jMN; arc=none smtp.client-ip=10.30.226.201 Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=kernel.org header.i=@kernel.org header.b="GrGq1jMN" Received: by smtp.kernel.org (Postfix) with ESMTPSA id AC7D9C19424; Mon, 23 Feb 2026 10:05:06 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=k20201202; t=1771841110; bh=0YMrV2cevL2my8oUGKDEQ/x1xeXPbxY0fifBbC2gTtA=; h=From:To:Cc:Subject:Date:In-Reply-To:References:From; b=GrGq1jMNFfkVNK/VI1330fWq4WOfE4w8S+zutqmgXVR1VgW3ohmN4W7pCTo0HdsCS OjaRITDD1gZlLPNkRjsqnz8oJvMBQpw7ScvjIfcdjdUg6Ujm5dl0a9fOPBQTOQZJT7 P8OSdnwAdx4rQAidIVUKBgkjeBZtyy11g8GVe76VEZBBeyg1lVA+kGzgykivCkP49p 2nqCdhFkisv3Sp0z44BLT0HiJL9B6kkzaSNCT9+SY2k4Zhy5Pvtw2OU7epKakE8wmC 659F7YfWnLsWbfzMWjwFobU5tvRIV9Jx4u/VAkWnI/jtmP6bDW2S/Tl1902Ad4HHUl zOoN6XSSbijnA== From: Michael Walle To: Nishanth Menon , Vignesh Raghavendra , Tero Kristo , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Guenter Roeck , Srinivas Kandagatla , Wim Van Sebroeck , Jonathan Corbet , Shuah Khan Cc: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org, linux-watchdog@vger.kernel.org, linux-doc@vger.kernel.org, Michael Walle Subject: [PATCH 1/8] arm64: dts: ti: remove the Kontron SMARC-sAM67 Date: Mon, 23 Feb 2026 11:04:46 +0100 Message-ID: <20260223100459.844967-2-mwalle@kernel.org> X-Mailer: git-send-email 2.47.3 In-Reply-To: <20260223100459.844967-1-mwalle@kernel.org> References: <20260223100459.844967-1-mwalle@kernel.org> Precedence: bulk X-Mailing-List: devicetree@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Transfer-Encoding: 8bit I was just informed that this product is discontinued (without being ever released to the market). Pull the plug and let's not waste any more maintainers time. Signed-off-by: Michael Walle --- arch/arm64/boot/dts/ti/Makefile | 13 - .../dts/ti/k3-am67a-kontron-sa67-ads2.dtso | 146 --- .../dts/ti/k3-am67a-kontron-sa67-base.dts | 1091 ----------------- .../dts/ti/k3-am67a-kontron-sa67-gbe1.dtso | 26 - .../dts/ti/k3-am67a-kontron-sa67-gpios.dtso | 61 - .../ti/k3-am67a-kontron-sa67-rtc-rv8263.dtso | 31 - 6 files changed, 1368 deletions(-) delete mode 100644 arch/arm64/boot/dts/ti/k3-am67a-kontron-sa67-ads2.dtso delete mode 100644 arch/arm64/boot/dts/ti/k3-am67a-kontron-sa67-base.dts delete mode 100644 arch/arm64/boot/dts/ti/k3-am67a-kontron-sa67-gbe1.dtso delete mode 100644 arch/arm64/boot/dts/ti/k3-am67a-kontron-sa67-gpios.dtso delete mode 100644 arch/arm64/boot/dts/ti/k3-am67a-kontron-sa67-rtc-rv8263.dtso diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile index ba01a929e06f..260e211ca277 100644 --- a/arch/arm64/boot/dts/ti/Makefile +++ b/arch/arm64/boot/dts/ti/Makefile @@ -142,17 +142,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-j721s2-evm-pcie1-ep.dtbo dtb-$(CONFIG_ARCH_K3) += k3-j721s2-evm-usb0-type-a.dtbo # Boards with J722s SoC -k3-am67a-kontron-sa67-dtbs := k3-am67a-kontron-sa67-base.dtb \ - k3-am67a-kontron-sa67-rtc-rv8263.dtbo k3-am67a-kontron-sa67-gbe1.dtbo -k3-am67a-kontron-sa67-ads2-dtbs := k3-am67a-kontron-sa67.dtb k3-am67a-kontron-sa67-ads2.dtbo dtb-$(CONFIG_ARCH_K3) += k3-am67a-beagley-ai.dtb -dtb-$(CONFIG_ARCH_K3) += k3-am67a-kontron-sa67.dtb -dtb-$(CONFIG_ARCH_K3) += k3-am67a-kontron-sa67-base.dtb -dtb-$(CONFIG_ARCH_K3) += k3-am67a-kontron-sa67-gbe1.dtbo -dtb-$(CONFIG_ARCH_K3) += k3-am67a-kontron-sa67-gpios.dtbo -dtb-$(CONFIG_ARCH_K3) += k3-am67a-kontron-sa67-rtc-rv8263.dtbo -dtb-$(CONFIG_ARCH_K3) += k3-am67a-kontron-sa67-ads2.dtb -dtb-$(CONFIG_ARCH_K3) += k3-am67a-kontron-sa67-ads2.dtbo dtb-$(CONFIG_ARCH_K3) += k3-j722s-evm.dtb dtb-$(CONFIG_ARCH_K3) += k3-j722s-evm-csi2-quad-rpi-cam-imx219.dtbo dtb-$(CONFIG_ARCH_K3) += k3-j722s-evm-csi2-quad-tevi-ov5640.dtbo @@ -244,8 +234,6 @@ k3-am642-tqma64xxl-mbax4xxl-sdcard-dtbs := \ k3-am642-tqma64xxl-mbax4xxl.dtb k3-am64-tqma64xxl-mbax4xxl-sdcard.dtbo k3-am642-tqma64xxl-mbax4xxl-wlan-dtbs := \ k3-am642-tqma64xxl-mbax4xxl.dtb k3-am64-tqma64xxl-mbax4xxl-wlan.dtbo -k3-am67a-kontron-sa67-base-gpios-dtbs := \ - k3-am67a-kontron-sa67-base.dtb k3-am67a-kontron-sa67-gpios.dtbo k3-am68-sk-base-board-csi2-dual-imx219-dtbs := k3-am68-sk-base-board.dtb \ k3-j721e-sk-csi2-dual-imx219.dtbo k3-am68-sk-base-board-pcie1-ep-dtbs := k3-am68-sk-base-board.dtb \ @@ -318,7 +306,6 @@ dtb- += k3-am625-beagleplay-csi2-ov5640.dtb \ k3-am642-phyboard-electra-x27-gpio1-spi1-uart3.dtb \ k3-am642-tqma64xxl-mbax4xxl-sdcard.dtb \ k3-am642-tqma64xxl-mbax4xxl-wlan.dtb \ - k3-am67a-kontron-sa67-base-gpios.dtb \ k3-am68-sk-base-board-csi2-dual-imx219.dtb \ k3-am68-sk-base-board-pcie1-ep.dtb \ k3-am69-sk-csi2-dual-imx219.dtb \ diff --git a/arch/arm64/boot/dts/ti/k3-am67a-kontron-sa67-ads2.dtso b/arch/arm64/boot/dts/ti/k3-am67a-kontron-sa67-ads2.dtso deleted file mode 100644 index ae5e2b52594b..000000000000 --- a/arch/arm64/boot/dts/ti/k3-am67a-kontron-sa67-ads2.dtso +++ /dev/null @@ -1,146 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only OR MIT -/* - * Kontron SMARC-sa67 board on the Kontron Eval Carrier 2.2. - * - * Copyright (c) 2025 Kontron Europe GmbH - */ - -/dts-v1/; -/plugin/; - -#include -#include "k3-pinctrl.h" - -&{/} { - pwm-fan { - compatible = "pwm-fan"; - pinctrl-names = "default"; - pinctrl-0 = <&pwm_fan_pins_default>; - interrupts-extended = <&main_gpio1 7 IRQ_TYPE_EDGE_FALLING>; - #cooling-cells = <2>; - pwms = <&epwm2 1 4000000 0>; - cooling-levels = <1 128 192 255>; - }; - - sound { - compatible = "simple-audio-card"; - simple-audio-card,widgets = - "Headphone", "Headphone Jack", - "Line", "Line Out Jack", - "Microphone", "Microphone Jack", - "Line", "Line In Jack"; - simple-audio-card,routing = - "Line Out Jack", "LINEOUTR", - "Line Out Jack", "LINEOUTL", - "Headphone Jack", "HPOUTR", - "Headphone Jack", "HPOUTL", - "IN1L", "Line In Jack", - "IN1R", "Line In Jack", - "Microphone Jack", "MICBIAS", - "IN2L", "Microphone Jack", - "IN2R", "Microphone Jack"; - simple-audio-card,mclk-fs = <256>; - simple-audio-card,format = "i2s"; - simple-audio-card,bitclock-master = <&dailink0_master>; - simple-audio-card,frame-master = <&dailink0_master>; - - simple-audio-card,cpu { - sound-dai = <&mcasp0>; - }; - - dailink0_master: simple-audio-card,codec { - sound-dai = <&wm8904>; - clocks = <&audio_refclk0>; - }; - }; - - cvcc_1p8v_i2s: regulator-carrier-0 { - compatible = "regulator-fixed"; - regulator-name = "V_1V8_S0_I2S"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - cvcc_1p8v_s0: regulator-carrier-1 { - compatible = "regulator-fixed"; - regulator-name = "V_1V8_S0"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - cvcc_3p3v_s0: regulator-carrier-2 { - compatible = "regulator-fixed"; - regulator-name = "V_3V3_S0"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; -}; - -&audio_refclk0 { - status = "okay"; -}; - -&epwm2 { - status = "okay"; -}; - -&main_pmx0 { - pwm_fan_pins_default: pwm-fan-default-pins { - pinctrl-single,pins = < - J722S_IOPAD(0x1ec, PIN_OUTPUT, 8) /* (A22) I2C1_SDA.EHRPWM2_B */ - J722S_IOPAD(0x194, PIN_INPUT, 0) /* (A25) MCASP0_AXR3.GPIO1_7 */ - >; - }; -}; - -&mcasp0 { - #sound-dai-cells = <0>; - status = "okay"; -}; - -&mcu_i2c0 { - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - - wm8904: audio-codec@1a { - #sound-dai-cells = <0>; - compatible = "wlf,wm8904"; - reg = <0x1a>; - clocks = <&audio_refclk0>; - clock-names = "mclk"; - AVDD-supply = <&cvcc_1p8v_i2s>; - CPVDD-supply = <&cvcc_1p8v_i2s>; - DBVDD-supply = <&cvcc_1p8v_i2s>; - DCVDD-supply = <&cvcc_1p8v_i2s>; - MICVDD-supply = <&cvcc_1p8v_i2s>; - }; -}; - -&mcu_spi0 { - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <104000000>; - m25p,fast-read; - vcc-supply = <&cvcc_1p8v_s0>; - }; -}; - -&wkup_i2c0 { - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - - /* SMARC Carrier EEPROM */ - eeprom@57 { - compatible = "atmel,24c32"; - reg = <0x57>; - pagesize = <32>; - vcc-supply = <&cvcc_3p3v_s0>; - }; -}; diff --git a/arch/arm64/boot/dts/ti/k3-am67a-kontron-sa67-base.dts b/arch/arm64/boot/dts/ti/k3-am67a-kontron-sa67-base.dts deleted file mode 100644 index 95234c8460ed..000000000000 --- a/arch/arm64/boot/dts/ti/k3-am67a-kontron-sa67-base.dts +++ /dev/null @@ -1,1091 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only OR MIT -/* - * Kontron SMARC-sAM67 module - * - * Copyright (c) 2025 Kontron Europe GmbH - */ - -/dts-v1/; - -#include -#include -#include -#include "k3-j722s.dtsi" -#include "k3-serdes.h" - -/ { - compatible = "kontron,sa67", "ti,j722s"; - model = "Kontron SMARC-sAM67"; - - aliases { - serial0 = &mcu_uart0; - serial1 = &main_uart0; - serial2 = &main_uart5; - serial3 = &wkup_uart0; - mmc0 = &sdhci0; - mmc1 = &sdhci1; - rtc0 = &wkup_rtc0; - }; - - lcd0_backlight: backlight-1 { - compatible = "pwm-backlight"; - pinctrl-names = "default"; - pinctrl-0 = <&lcd0_backlight_pins_default>; - pwms = <&epwm1 0 50000 0>; - brightness-levels = <0 32 64 96 128 160 192 224 255>; - default-brightness-level = <8>; - enable-gpios = <&main_gpio0 29 GPIO_ACTIVE_HIGH>; - status = "disabled"; - }; - - lcd1_backlight: backlight-2 { - compatible = "pwm-backlight"; - pinctrl-names = "default"; - pinctrl-0 = <&lcd1_backlight_pins_default>; - pwms = <&epwm1 1 50000 0>; - brightness-levels = <0 32 64 96 128 160 192 224 255>; - default-brightness-level = <8>; - enable-gpios = <&main_gpio1 18 GPIO_ACTIVE_HIGH>; - status = "disabled"; - }; - - chosen { - stdout-path = "serial1:115200n8"; - }; - - connector-1 { - compatible = "gpio-usb-b-connector", "usb-b-connector"; - pinctrl-names = "default"; - pinctrl-0 = <&usb0_connector_pins_default>; - type = "micro"; - id-gpios = <&main_gpio0 34 GPIO_ACTIVE_HIGH>; - vbus-supply = <&vcc_usb0_vbus>; - - port { - usb0_connector: endpoint { - remote-endpoint = <&usb0_hc>; - }; - }; - - }; - - memory@80000000 { - /* Filled in by bootloader */ - reg = <0x00000000 0x00000000 0x00000000 0x00000000>, - <0x00000000 0x00000000 0x00000000 0x00000000>; - device_type = "memory"; - bootph-pre-ram; - }; - - reserved_memory: reserved-memory { - #address-cells = <2>; - #size-cells = <2>; - ranges; - - linux,cma { - compatible = "shared-dma-pool"; - reusable; - size = <0x00 0x10000000>; - linux,cma-default; - }; - - secure_tfa_ddr: tfa@9e780000 { - reg = <0x00 0x9e780000 0x00 0x80000>; - no-map; - }; - - secure_ddr: optee@9e800000 { - reg = <0x00 0x9e800000 0x00 0x01800000>; - no-map; - }; - - wkup_r5fss0_core0_memory_region: r5f-memory@a0100000 { - compatible = "shared-dma-pool"; - reg = <0x00 0xa0100000 0x00 0xf00000>; - no-map; - }; - }; - - vin_5p0: regulator-1 { - compatible = "regulator-fixed"; - regulator-name = "V_3V0_5V25_IN"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - regulator-boot-on; - bootph-all; - }; - - vcc_3p3_s5: regulator-2 { - compatible = "regulator-fixed"; - regulator-name = "V_3V3_S5"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vin_5p0>; - regulator-always-on; - regulator-boot-on; - bootph-all; - }; - - vcc_1p8_s5: regulator-3 { - compatible = "regulator-fixed"; - regulator-name = "V_1V8_S5"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vin_5p0>; - regulator-always-on; - regulator-boot-on; - bootph-all; - }; - - vcc_3p3_s0: regulator-4 { - compatible = "regulator-fixed"; - regulator-name = "V_3V3_S0"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vcc_3p3_s5>; - regulator-always-on; - regulator-boot-on; - enable-active-high; - gpios = <&tps652g1 1 GPIO_ACTIVE_HIGH>; - bootph-all; - }; - - vcc_3p3_sd_s0: regulator-5 { - compatible = "regulator-fixed"; - regulator-name = "SDIO_PWR_EN"; - pinctrl-names = "default"; - pinctrl-0 = <&vcc_3p3_sd_s0_pins_default>; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - enable-active-high; - gpios = <&main_gpio0 7 GPIO_ACTIVE_HIGH>; - bootph-all; - }; - - vcc_3p3_sd_vio_s0: regulator-6 { - compatible = "regulator-gpio"; - regulator-name = "V_3V3_1V8_SD_S0"; - pinctrl-names = "default"; - pinctrl-0 = <&vcc_3p3_sd_vio_s0_pins_default>; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vcc_3p3_s0>; - regulator-boot-on; - enable-active-high; - enable-gpios = <&main_gpio0 7 GPIO_ACTIVE_HIGH>; - gpios = <&main_gpio0 8 GPIO_ACTIVE_HIGH>; - states = <3300000 0x0>, - <1800000 0x1>; - bootph-all; - }; - - vcc_3p3_cam_s0: regulator-7 { - compatible = "regulator-fixed"; - regulator-name = "V_3V3_CAM_S0"; - pinctrl-names = "default"; - pinctrl-0 = <&vcc_3p3_cam_s0_pins_default>; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vcc_3p3_s5>; - enable-active-high; - interrupts-extended = <&main_gpio1 30 IRQ_TYPE_EDGE_FALLING>; - bootph-all; - }; - - vcc_1p1_s0: regulator-8 { - compatible = "regulator-fixed"; - regulator-name = "V_1V1_S0"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - vin-supply = <&vcc_1p1_s3>; - regulator-always-on; - regulator-boot-on; - enable-active-high; - /* shared with V_0V75_0V85_CORE_S0 */ - gpios = <&tps652g1 4 GPIO_ACTIVE_HIGH>; - bootph-all; - }; - - vcc_0p85_vcore_s0: regulator-9 { - compatible = "regulator-fixed"; - regulator-name = "V_0V75_0V85_CORE_S0"; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <850000>; - vin-supply = <&vin_5p0>; - regulator-always-on; - regulator-boot-on; - enable-active-high; - gpios = <&tps652g1 4 GPIO_ACTIVE_HIGH>; - bootph-all; - }; - - vcc_lcd0_panel: regulator-10 { - compatible = "regulator-fixed"; - regulator-name = "LCD0_VDD_EN"; - pinctrl-names = "default"; - pinctrl-0 = <&vcc_lcd0_panel_pins_default>; - enable-active-high; - gpios = <&main_gpio0 30 GPIO_ACTIVE_HIGH>; - }; - - vcc_lcd1_panel: regulator-11 { - compatible = "regulator-fixed"; - regulator-name = "LCD1_VDD_EN"; - pinctrl-names = "default"; - pinctrl-0 = <&vcc_lcd1_panel_pins_default>; - enable-active-high; - gpios = <&main_gpio1 19 GPIO_ACTIVE_HIGH>; - }; - - vcc_usb0_vbus: regulator-12 { - compatible = "regulator-fixed"; - regulator-name = "USB0_EN_OC#"; - pinctrl-names = "default"; - pinctrl-0 = <&vcc_usb0_vbus_pins_default>; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - gpios = <&main_gpio1 50 GPIO_ACTIVE_HIGH>; - }; -}; - -&audio_refclk0 { - pinctrl-names = "default"; - pinctrl-0 = <&audio_refclk0_pins_default>; - status = "disabled"; -}; - -&audio_refclk1 { - pinctrl-names = "default"; - pinctrl-0 = <&audio_refclk1_pins_default>; - status = "disabled"; -}; - -&cpsw3g { - pinctrl-names = "default"; - pinctrl-0 = <&cpsw3g_pins_default>, <&rgmii1_pins_default>, - <&rgmii2_pins_default>; - status = "okay"; -}; - -&cpsw3g_mdio { - pinctrl-names = "default"; - pinctrl-0 = <&cpsw3g_mdio_pins_default>; - status = "okay"; - - phy0: ethernet-phy@0 { - reg = <0>; - }; - - phy1: ethernet-phy@1 { - reg = <1>; - }; -}; - -&cpsw_port1 { - phy-connection-type = "rgmii-id"; - phy-handle = <&phy0>; - nvmem-cells = <&base_mac_address 0>; - nvmem-cell-names = "mac-address"; - status = "okay"; -}; - -&main_gpio0 { - gpio-line-names = - "", "", "", "", "", "", "", "SOC_SDIO_PWR_EN", "VSD_SEL", - "RESET_OUT#", "I2C_MUX_RST#", "SPI_FLASH_CS#", "QPSI_CS0#", - "QSPI_CS1#", "BOOT_SEL1", "BRDCFG0", "BRDCFG1", "BRDCFG2", - "BRDCFG3", "BRDCFG4", "", "BRDREV0", "BRDREV1", "", "", "", "", - "", "", "LCD0_BKLT_EN", "LCD0_VDD_EN", "GBE_INT#", "DSI0_TE", - "CHARGING#", "USB0_OTG_ID", "PMIC_INT#", "RTC_INT#", - "EDP_BRIDGE_EN", "EDP_BRIDGE_IRQ#", "", "CHARGER_PRSNT#", "", - "", "", "", "BOOT_SEL2#", "CAM2_RST#", "CAM2_PWR#", "", - "CAM3_RST#", "CAM3_PWR#", "GPIO0", "GPIO1", "", "", "", "", "", - "", "", "", "", "", "", "", "", "", "", "", "GPIO10", "GPIO11", - "SLEEP#", "LID#"; - - bootph-all; - status = "okay"; -}; - -&main_gpio1 { - gpio-line-names = - "", "", "", "", "", "", "", "GPIO6", "GPIO7", "", "", "", "", - "GPIO8", "GPIO9", "PCIE_A_RST#", "", "BATLOW#", "LCD1_BKLT_EN", - "LCD1_VDD_EN", "", "", "", "", "GPIO2", "GPIO3", "", "", - "GPIO4", "GPIO5", "CAM_S0_FAULT#", "BOOT_SEL0#", "", "", "", "", - "", "", "", "", "", "", "", "", "", "", "", "", "SDIO_CD#", "", - "USB0_DRVVBUS", "USB1_DRVVBUS"; - - bootph-all; - status = "okay"; -}; - -/* I2C_LOCAL */ -&main_i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&main_i2c0_pins_default>; - clock-frequency = <100000>; - bootph-all; - status = "okay"; - - tps652g1: pmic@44 { - compatible = "ti,tps652g1"; - reg = <0x44>; - ti,primary-pmic; - system-power-controller; - - gpio-controller; - #gpio-cells = <2>; - gpio-line-names = - "LPM_EN#", "EN_3V3_S0", "POWER_BTN#", "CARRIER_STBY#", - "EN_0V75_0V85_VCORE_S0", "PMIC_WAKEUP"; - - pinctrl-names = "default"; - pinctrl-0 = <&pmic_irq_pins_default>; - interrupts-extended = <&main_gpio0 35 IRQ_TYPE_EDGE_FALLING>; - - buck1-supply = <&vin_5p0>; - buck2-supply = <&vin_5p0>; - buck3-supply = <&vin_5p0>; - buck4-supply = <&vin_5p0>; - ldo1-supply = <&vin_5p0>; - ldo2-supply = <&vin_5p0>; - ldo3-supply = <&vin_5p0>; - - bootph-all; - - regulators { - vcc_0p85_s0: buck1 { - regulator-name = "V_0V85_S0"; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <850000>; - regulator-boot-on; - regulator-always-on; - }; - - vcc_1p1_s3: buck2 { - regulator-name = "V_1V1_S3"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-boot-on; - regulator-always-on; - }; - - vcc_1p8_s0: buck3 { - regulator-name = "V_1V8_S0"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - regulator-always-on; - }; - - vcc_1p2_s0: buck4 { - regulator-name = "V_1V2_S0"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-boot-on; - regulator-always-on; - }; - - vcc_1p8_vda_pll_s0: ldo1 { - regulator-name = "V_1V8_VDA_PLL_S0"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - regulator-always-on; - }; - - vcc_1p8_s3: ldo2 { - regulator-name = "V_1V8_S3"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - regulator-always-on; - }; - - vcc_1p8_ret_s5: ldo3 { - regulator-name = "V_1V8_RET_S5"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - regulator-always-on; - }; - }; - }; - - system-controller@4a { - compatible = "kontron,sa67mcu", "kontron,sl28cpld"; - reg = <0x4a>; - #address-cells = <1>; - #size-cells = <0>; - - watchdog@4 { - compatible = "kontron,sa67mcu-wdt", "kontron,sl28cpld-wdt"; - reg = <0x4>; - kontron,assert-wdt-timeout-pin; - }; - - hwmon@8 { - compatible = "kontron,sa67mcu-hwmon"; - reg = <0x8>; - }; - }; -}; - -/* I2C_CAM */ -&main_i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&main_i2c2_pins_default>; - clock-frequency = <100000>; - status = "okay"; - - i2c-mux@70 { - compatible = "nxp,pca9546"; - reg = <0x70>; - #address-cells = <1>; - #size-cells = <0>; - - pinctrl-names = "default"; - pinctrl-0 = <&i2c_mux_pins_default>; - - vdd-supply = <&vcc_1p8_s0>; - reset-gpios = <&main_gpio0 10 GPIO_ACTIVE_LOW>; - - i2c_cam0: i2c@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - }; - - i2c_cam1: i2c@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - }; - - i2c_cam2: i2c@2 { - #address-cells = <1>; - #size-cells = <0>; - reg = <2>; - }; - - i2c_cam3: i2c@3 { - #address-cells = <1>; - #size-cells = <0>; - reg = <3>; - }; - }; -}; - -/* I2C_LCD */ -&main_i2c3 { - pinctrl-names = "default"; - pinctrl-0 = <&main_i2c3_pins_default>; - clock-frequency = <100000>; - status = "okay"; -}; - -&main_pmx0 { - audio_refclk0_pins_default: audio-refclk0-default-pins { - pinctrl-single,pins = < - J722S_IOPAD(0x0c4, PIN_OUTPUT, 5) /* (W23) VOUT0_DATA3.AUDIO_EXT_REFCLK0 */ - >; - }; - - audio_refclk1_pins_default: audio-refclk1-default-pins { - pinctrl-single,pins = < - J722S_IOPAD(0x0a0, PIN_OUTPUT, 1) /* (N24) GPMC0_WPn.AUDIO_EXT_REFCLK1 */ - >; - }; - - cpsw3g_mdio_pins_default: cpsw3g-mdio-default-pins { - pinctrl-single,pins = < - J722S_IOPAD(0x160, PIN_OUTPUT, 0) /* (AC24) MDIO0_MDC */ - J722S_IOPAD(0x15c, PIN_INPUT, 0) /* (AD25) MDIO0_MDIO */ - >; - }; - - cpsw3g_pins_default: cpsw3g-default-pins { - pinctrl-single,pins = < - J722S_IOPAD(0x1b8, PIN_OUTPUT, 1) /* (C20) SPI0_CS1.CP_GEMAC_CPTS0_TS_COMP */ - >; - }; - - edp_bridge_pins_default: edp-bridge-default-pins { - pinctrl-single,pins = < - J722S_IOPAD(0x098, PIN_OUTPUT, 7) /* (V21) GPMC0_WAIT0.GPIO0_37 */ - J722S_IOPAD(0x09c, PIN_INPUT, 7) /* (W26) GPMC0_WAIT1.GPIO0_38 */ - >; - }; - - i2c_mux_pins_default: i2c-mux-default-pins { - pinctrl-single,pins = < - J722S_IOPAD(0x028, PIN_OUTPUT, 7) /* (M27) OSPI0_D7.GPIO0_10 */ - >; - }; - - lcd0_backlight_pins_default: lcd0-backlight-default-pins { - pinctrl-single,pins = < - J722S_IOPAD(0x074, PIN_OUTPUT, 7) /* (V22) GPMC0_AD14.GPIO0_29 */ - J722S_IOPAD(0x110, PIN_OUTPUT, 4) /* (G27) MMC2_DAT1.EHRPWM1_A */ - >; - }; - - lcd1_backlight_pins_default: lcd1-backlight-default-pins { - pinctrl-single,pins = < - J722S_IOPAD(0x1c0, PIN_OUTPUT, 7) /* (E19) SPI0_D0.GPIO1_18 */ - J722S_IOPAD(0x114, PIN_OUTPUT, 4) /* (G26) MMC2_DAT0.EHRPWM1_B */ - >; - }; - - main_i2c0_pins_default: main-i2c0-default-pins { - pinctrl-single,pins = < - J722S_IOPAD(0x1e0, PIN_INPUT, 0) /* (D23) I2C0_SCL */ - J722S_IOPAD(0x1e4, PIN_INPUT, 0) /* (B22) I2C0_SDA */ - >; - bootph-all; - }; - - main_i2c2_pins_default: main-i2c2-default-pins { - pinctrl-single,pins = < - J722S_IOPAD(0x0b0, PIN_INPUT, 1) /* (P22) GPMC0_CSn2.I2C2_SCL */ - J722S_IOPAD(0x0b4, PIN_INPUT, 1) /* (P23) GPMC0_CSn3.I2C2_SDA */ - >; - }; - - main_i2c3_pins_default: main-i2c3-default-pins { - pinctrl-single,pins = < - J722S_IOPAD(0x1d0, PIN_INPUT, 2) /* (E22) UART0_CTSn.I2C3_SCL */ - J722S_IOPAD(0x1d4, PIN_INPUT, 2) /* (B21) UART0_RTSn.I2C3_SDA */ - >; - }; - - main_i2c4_pins_default: main-i2c4-default-pins { - pinctrl-single,pins = < - J722S_IOPAD(0x0a8, PIN_INPUT, 1) /* (R27) GPMC0_CSn0.I2C4_SCL */ - J722S_IOPAD(0x0ac, PIN_INPUT, 1) /* (P21) GPMC0_CSn1.I2C4_SDA */ - >; - }; - - main_uart0_pins_default: main-uart0-default-pins { - pinctrl-single,pins = < - J722S_IOPAD(0x1c8, PIN_INPUT, 0) /* (F19) UART0_RXD */ - J722S_IOPAD(0x1cc, PIN_OUTPUT, 0) /* (F20) UART0_TXD */ - >; - bootph-all; - }; - - main_uart5_pins_default: main-uart5-default-pins { - pinctrl-single,pins = < - J722S_IOPAD(0x108, PIN_INPUT, 3) /* (J27) MMC2_DAT3.UART5_RXD */ - J722S_IOPAD(0x10c, PIN_OUTPUT, 3) /* (H27) MMC2_DAT2.UART5_TXD */ - J722S_IOPAD(0x008, PIN_INPUT, 5) /* (L22) OSPI0_DQS.UART5_CTSn */ - J722S_IOPAD(0x004, PIN_OUTPUT, 5) /* (L23) OSPI0_LBCLKO.UART5_RTSn */ - >; - }; - - mcasp0_pins_default: mcasp0-default-pins { - pinctrl-single,pins = < - J722S_IOPAD(0x1a4, PIN_INPUT, 0) /* (D25) MCASP0_ACLKX */ - J722S_IOPAD(0x1a8, PIN_INPUT, 0) /* (C26) MCASP0_AFSX */ - J722S_IOPAD(0x1a0, PIN_INPUT, 0) /* (F23) MCASP0_AXR0 */ - J722S_IOPAD(0x19c, PIN_OUTPUT, 0) /* (B25) MCASP0_AXR1 */ - >; - }; - - mcasp2_pins_default: mcasp2-default-pins { - pinctrl-single,pins = < - J722S_IOPAD(0x070, PIN_INPUT, 3) /* (V24) GPMC0_AD13.MCASP2_ACLKX */ - J722S_IOPAD(0x06c, PIN_INPUT, 3) /* (V26) GPMC0_AD12.MCASP2_AFSX */ - J722S_IOPAD(0x05c, PIN_INPUT, 3) /* (U27) GPMC0_AD8.MCASP2_AXR0 */ - J722S_IOPAD(0x060, PIN_OUTPUT, 3) /* (U26) GPMC0_AD9.MCASP2_AXR1 */ - >; - }; - - oldi0_pins_default: oldi0-default-pins { - pinctrl-single,pins = < - J722S_IOPAD(0x260, PIN_OUTPUT, 0) /* (AF23) OLDI0_A0N */ - J722S_IOPAD(0x25c, PIN_OUTPUT, 0) /* (AG24) OLDI0_A0P */ - J722S_IOPAD(0x268, PIN_OUTPUT, 0) /* (AG22) OLDI0_A1N */ - J722S_IOPAD(0x264, PIN_OUTPUT, 0) /* (AG23) OLDI0_A1P */ - J722S_IOPAD(0x270, PIN_OUTPUT, 0) /* (AB20) OLDI0_A2N */ - J722S_IOPAD(0x26c, PIN_OUTPUT, 0) /* (AB21) OLDI0_A2P */ - J722S_IOPAD(0x278, PIN_OUTPUT, 0) /* (AG20) OLDI0_A3N */ - J722S_IOPAD(0x274, PIN_OUTPUT, 0) /* (AG21) OLDI0_A3P */ - J722S_IOPAD(0x2a0, PIN_OUTPUT, 0) /* (AF21) OLDI0_CLK0N */ - J722S_IOPAD(0x29c, PIN_OUTPUT, 0) /* (AE20) OLDI0_CLK0P */ - >; - }; - - oldi1_pins_default: oldi1-default-pins { - pinctrl-single,pins = < - J722S_IOPAD(0x280, PIN_OUTPUT, 0) /* (AD21) OLDI0_A4N */ - J722S_IOPAD(0x27c, PIN_OUTPUT, 0) /* (AC21) OLDI0_A4P */ - J722S_IOPAD(0x288, PIN_OUTPUT, 0) /* (AF19) OLDI0_A5N */ - J722S_IOPAD(0x284, PIN_OUTPUT, 0) /* (AF18) OLDI0_A5P */ - J722S_IOPAD(0x290, PIN_OUTPUT, 0) /* (AG17) OLDI0_A6N */ - J722S_IOPAD(0x28c, PIN_OUTPUT, 0) /* (AG18) OLDI0_A6P */ - J722S_IOPAD(0x298, PIN_OUTPUT, 0) /* (AB19) OLDI0_A7N */ - J722S_IOPAD(0x294, PIN_OUTPUT, 0) /* (AA20) OLDI0_A7P */ - J722S_IOPAD(0x2a8, PIN_OUTPUT, 0) /* (AD20) OLDI0_CLK1N */ - J722S_IOPAD(0x2a4, PIN_OUTPUT, 0) /* (AE19) OLDI0_CLK1P */ - >; - }; - - ospi0_pins_default: ospi0-default-pins { - pinctrl-single,pins = < - J722S_IOPAD(0x000, PIN_OUTPUT, 0) /* (L24) OSPI0_CLK */ - J722S_IOPAD(0x02c, PIN_OUTPUT, 0) /* (K26) OSPI0_CSn0 */ - J722S_IOPAD(0x030, PIN_OUTPUT, 0) /* (K23) OSPI0_CSn1 */ - J722S_IOPAD(0x034, PIN_OUTPUT, 0) /* (K22) OSPI0_CSn2 */ - J722S_IOPAD(0x00c, PIN_INPUT, 0) /* (K27) OSPI0_D0 */ - J722S_IOPAD(0x010, PIN_INPUT, 0) /* (L27) OSPI0_D1 */ - J722S_IOPAD(0x014, PIN_INPUT, 0) /* (L26) OSPI0_D2 */ - J722S_IOPAD(0x018, PIN_INPUT, 0) /* (L25) OSPI0_D3 */ - >; - bootph-all; - }; - - pcie0_rc_pins_default: pcie0-rc-default-pins { - pinctrl-single,pins = < - J722S_IOPAD(0x2ac, PIN_OUTPUT, 0) /* (F25) PCIE0_CLKREQn */ - J722S_IOPAD(0x1b4, PIN_OUTPUT, 7) /* (B20) SPI0_CS0.GPIO1_15 */ - >; - }; - - pmic_irq_pins_default: pmic-irq-default-pins { - pinctrl-single,pins = < - J722S_IOPAD(0x090, PIN_INPUT, 7) /* (P27) GPMC0_BE0n_CLE.GPIO0_35 */ - >; - }; - - rgmii1_pins_default: rgmii1-default-pins { - pinctrl-single,pins = < - J722S_IOPAD(0x14c, PIN_INPUT, 0) /* (AC25) RGMII1_RD0 */ - J722S_IOPAD(0x150, PIN_INPUT, 0) /* (AD27) RGMII1_RD1 */ - J722S_IOPAD(0x154, PIN_INPUT, 0) /* (AE24) RGMII1_RD2 */ - J722S_IOPAD(0x158, PIN_INPUT, 0) /* (AE26) RGMII1_RD3 */ - J722S_IOPAD(0x148, PIN_INPUT, 0) /* (AE27) RGMII1_RXC */ - J722S_IOPAD(0x144, PIN_INPUT, 0) /* (AD23) RGMII1_RX_CTL */ - J722S_IOPAD(0x134, PIN_OUTPUT, 0) /* (AF27) RGMII1_TD0 */ - J722S_IOPAD(0x138, PIN_OUTPUT, 0) /* (AE23) RGMII1_TD1 */ - J722S_IOPAD(0x13c, PIN_OUTPUT, 0) /* (AG25) RGMII1_TD2 */ - J722S_IOPAD(0x140, PIN_OUTPUT, 0) /* (AF24) RGMII1_TD3 */ - J722S_IOPAD(0x130, PIN_OUTPUT, 0) /* (AG26) RGMII1_TXC */ - J722S_IOPAD(0x12c, PIN_OUTPUT, 0) /* (AF25) RGMII1_TX_CTL */ - >; - }; - - rgmii2_pins_default: rgmii2-default-pins { - pinctrl-single,pins = < - J722S_IOPAD(0x0f8, PIN_INPUT, 2) /* (AB24) VOUT0_HSYNC.RGMII2_RD0 */ - J722S_IOPAD(0x0fc, PIN_INPUT, 2) /* (AC27) VOUT0_DE.RGMII2_RD1 */ - J722S_IOPAD(0x100, PIN_INPUT, 2) /* (AB23) VOUT0_VSYNC.RGMII2_RD2 */ - J722S_IOPAD(0x104, PIN_INPUT, 2) /* (AC26) VOUT0_PCLK.RGMII2_RD3 */ - J722S_IOPAD(0x0f4, PIN_INPUT, 2) /* (AB27) VOUT0_DATA15.RGMII2_RXC */ - J722S_IOPAD(0x0f0, PIN_INPUT, 2) /* (AB26) VOUT0_DATA14.RGMII2_RX_CTL */ - J722S_IOPAD(0x0e0, PIN_OUTPUT, 2) /* (AA25) VOUT0_DATA10.RGMII2_TD0 */ - J722S_IOPAD(0x0e4, PIN_OUTPUT, 2) /* (AB25) VOUT0_DATA11.RGMII2_TD1 */ - J722S_IOPAD(0x0e8, PIN_OUTPUT, 2) /* (AA23) VOUT0_DATA12.RGMII2_TD2 */ - J722S_IOPAD(0x0ec, PIN_OUTPUT, 2) /* (AA22) VOUT0_DATA13.RGMII2_TD3 */ - J722S_IOPAD(0x0dc, PIN_OUTPUT, 2) /* (AA27) VOUT0_DATA9.RGMII2_TXC */ - J722S_IOPAD(0x0d8, PIN_OUTPUT, 2) /* (AA24) VOUT0_DATA8.RGMII2_TX_CTL */ - >; - }; - - rtc_pins_default: rtc-default-pins { - pinctrl-single,pins = < - J722S_IOPAD(0x094, PIN_INPUT, 7) /* (P26) GPMC0_BE1n.GPIO0_36 */ - >; - }; - - sdhci1_pins_default: sdhci1-default-pins { - pinctrl-single,pins = < - J722S_IOPAD(0x23c, PIN_INPUT, 0) /* (H22) MMC1_CMD */ - J722S_IOPAD(0x234, PIN_OUTPUT, 0) /* (H24) MMC1_CLK */ - J722S_IOPAD(0x230, PIN_INPUT, 0) /* (H23) MMC1_DAT0 */ - J722S_IOPAD(0x22c, PIN_INPUT, 0) /* (H20) MMC1_DAT1 */ - J722S_IOPAD(0x228, PIN_INPUT, 0) /* (J23) MMC1_DAT2 */ - J722S_IOPAD(0x224, PIN_INPUT, 0) /* (H25) MMC1_DAT3 */ - J722S_IOPAD(0x240, PIN_INPUT, 0) /* (B24) MMC1_SDCD */ - J722S_IOPAD(0x244, PIN_INPUT, 0) /* (A24) MMC1_SDWP */ - >; - bootph-all; - }; - - usb0_connector_pins_default: usb0-connector-default-pins { - pinctrl-single,pins = < - J722S_IOPAD(0x08c, PIN_INPUT_PULLUP, 7) /* (N23) GPMC0_WEn.GPIO0_34 */ - >; - }; - - usb1_pins_default: usb1-default-pins { - pinctrl-single,pins = < - J722S_IOPAD(0x258, PIN_OUTPUT, 0) /* (B27) USB1_DRVVBUS */ - >; - }; - - vcc_3p3_sd_s0_pins_default: vcc-3p3-sd-s0-default-pins { - pinctrl-single,pins = < - J722S_IOPAD(0x01c, PIN_OUTPUT, 7) /* (L21) OSPI0_D4.GPIO0_7 */ - >; - bootph-all; - }; - - vcc_3p3_sd_vio_s0_pins_default: vcc-3p3-sd-vio-s0-default-pins { - pinctrl-single,pins = < - J722S_IOPAD(0x020, PIN_OUTPUT, 7) /* (M26) OSPI0_D5.GPIO0_8 */ - >; - bootph-all; - }; - - vcc_3p3_cam_s0_pins_default: vcc-3p3-cam-s0-default-pins { - pinctrl-single,pins = < - J722S_IOPAD(0x1f0, PIN_OUTPUT, 7) /* (A23) EXT_REFCLK1.GPIO1_30 */ - >; - }; - - vcc_lcd0_panel_pins_default: vcc-lcd0-panel-default-pins { - pinctrl-single,pins = < - J722S_IOPAD(0x078, PIN_OUTPUT, 7) /* (V23) GPMC0_AD15.GPIO0_30 */ - >; - }; - - vcc_lcd1_panel_pins_default: vcc-lcd1-panel-default-pins { - pinctrl-single,pins = < - J722S_IOPAD(0x1c4, PIN_OUTPUT, 7) /* (E20) SPI0_D1.GPIO1_19 */ - >; - }; - - vcc_usb0_vbus_pins_default: vcc-usb0-vbus-default-pins { - pinctrl-single,pins = < - J722S_IOPAD(0x254, PIN_OUTPUT, 7) /* (E25) USB0_DRVVBUS.GPIO1_50 */ - >; - }; -}; - -/* SER1 */ -&main_uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&main_uart0_pins_default>; - bootph-all; - status = "okay"; -}; - -/* SER2 */ -&main_uart5 { - pinctrl-names = "default"; - pinctrl-0 = <&main_uart5_pins_default>; - bootph-all; - status = "okay"; -}; - -/* I2S0 */ -&mcasp0 { - #sound-dai-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&mcasp0_pins_default>; - op-mode = <0>; /* I2S */ - tdm-slots = <2>; - serial-dir = <2 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0>; -}; - -/* I2S2 */ -&mcasp2 { - #sound-dai-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&mcasp2_pins_default>; - op-mode = <0>; /* I2S */ - tdm-slots = <2>; - serial-dir = <2 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0>; -}; - -/* CAN0 */ -&mcu_mcan0 { - pinctrl-names = "default"; - pinctrl-0 = <&mcu_mcan0_pins_default>; - status = "okay"; -}; - -/* CAN1 */ -&mcu_mcan1 { - pinctrl-names = "default"; - pinctrl-0 = <&mcu_mcan1_pins_default>; - status = "okay"; -}; - -&mcu_gpio0 { - gpio-line-names = - "", "", "", "", "", "", "", "", "", "", "", /* 10 */ "GPIO12", - "MCU_INT#", "", "", "", "", "", "", "", "", "", "", "GPIO13"; -}; - -/* I2C_GP */ -&mcu_i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&mcu_i2c0_pins_default>; - clock-frequency = <100000>; - status = "okay"; - - /* SMARC Module EEPROM */ - eeprom@50 { - compatible = "atmel,24c32"; - reg = <0x50>; - pagesize = <32>; - vcc-supply = <&vcc_1p8_s0>; - }; -}; - -&mcu_pmx0 { - mcu_i2c0_pins_default: mcu-i2c0-default-pins { - pinctrl-single,pins = < - J722S_MCU_IOPAD(0x044, PIN_INPUT, 0) /* (B13) MCU_I2C0_SCL */ - J722S_MCU_IOPAD(0x048, PIN_INPUT, 0) /* (E11) MCU_I2C0_SDA */ - >; - }; - mcu_mcan0_pins_default: mcu-mcan0-default-pins { - pinctrl-single,pins = < - J722S_MCU_IOPAD(0x038, PIN_INPUT, 0) /* (D8) MCU_MCAN0_RX */ - J722S_MCU_IOPAD(0x034, PIN_OUTPUT, 0) /* (B2) MCU_MCAN0_TX */ - >; - }; - - mcu_mcan1_pins_default: mcu-mcan1-default-pins { - pinctrl-single,pins = < - J722S_MCU_IOPAD(0x040, PIN_INPUT, 0) /* (B1) MCU_MCAN1_RX */ - J722S_MCU_IOPAD(0x03c, PIN_OUTPUT, 0) /* (C1) MCU_MCAN1_TX */ - >; - }; - - mcu_uart0_pins_default: mcu-uart0-default-pins { - pinctrl-single,pins = < - J722S_MCU_IOPAD(0x014, PIN_INPUT, 0) /* (B8) MCU_UART0_RXD */ - J722S_MCU_IOPAD(0x018, PIN_OUTPUT, 0) /* (B4) MCU_UART0_TXD */ - J722S_MCU_IOPAD(0x01c, PIN_INPUT, 0) /* (B5) MCU_UART0_CTSn */ - J722S_MCU_IOPAD(0x020, PIN_OUTPUT, 0) /* (C5) MCU_UART0_RTSn */ - >; - bootph-all; - }; - - mcu_spi0_pins_default: mcu-spi0-default-pins { - pinctrl-single,pins = < - J722S_MCU_IOPAD(0x008, PIN_OUTPUT, 0) /* (A9) MCU_SPI0_CLK */ - J722S_MCU_IOPAD(0x000, PIN_OUTPUT, 0) /* (C12) MCU_SPI0_CS0 */ - J722S_MCU_IOPAD(0x004, PIN_OUTPUT, 0) /* (A10) MCU_SPI0_CS1 */ - J722S_MCU_IOPAD(0x00c, PIN_INPUT, 0) /* (B12) MCU_SPI0_D0 */ - J722S_MCU_IOPAD(0x010, PIN_OUTPUT, 0) /* (C11) MCU_SPI0_D1 */ - >; - }; - - wkup_uart0_pins_default: wkup-uart0-default-pins { - pinctrl-single,pins = < - J722S_MCU_IOPAD(0x024, PIN_INPUT, 0) /* (B3) WKUP_UART0_RXD */ - J722S_MCU_IOPAD(0x028, PIN_OUTPUT, 0) /* (C8) WKUP_UART0_TXD */ - >; - bootph-all; - }; - - wkup_i2c0_pins_default: wkup-i2c0-default-pins { - pinctrl-single,pins = < - J722S_MCU_IOPAD(0x04c, PIN_INPUT, 0) /* (B9) WKUP_I2C0_SCL */ - J722S_MCU_IOPAD(0x050, PIN_INPUT, 0) /* (D11) WKUP_I2C0_SDA */ - >; - }; -}; - -/* SPI0 */ -&mcu_spi0 { - pinctrl-names = "default"; - pinctrl-0 = <&mcu_spi0_pins_default>; -}; - -/* SER0 */ -&mcu_uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&mcu_uart0_pins_default>; - bootph-all; - status = "okay"; -}; - -/* QSPI0 */ -&ospi0 { - pinctrl-0 = <&ospi0_pins_default>; - pinctrl-names = "default"; - status = "okay"; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <104000000>; - spi-rx-bus-width = <2>; - spi-tx-bus-width = <2>; - m25p,fast-read; - cdns,tshsl-ns = <60>; - cdns,tsd2d-ns = <60>; - cdns,tchsh-ns = <60>; - cdns,tslch-ns = <60>; - cdns,read-delay = <3>; - vcc-supply = <&vcc_1p8_s0>; - bootph-all; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - reg = <0x000000 0x400000>; - label = "failsafe bootloader"; - read-only; - }; - }; - - otp-1 { - compatible = "user-otp"; - - nvmem-layout { - compatible = "kontron,sa67-vpd", "kontron,sl28-vpd"; - - serial_number: serial-number { - }; - - base_mac_address: base-mac-address { - #nvmem-cell-cells = <1>; - }; - }; - }; - }; -}; - -&pcie0_rc { - pinctrl-names = "default"; - pinctrl-0 = <&pcie0_rc_pins_default>; - - /* - * This is low active, but the driver itself is broken and already - * inverts the logic. - */ - reset-gpios = <&main_gpio1 15 GPIO_ACTIVE_HIGH>; - phys = <&serdes1_pcie>; - phy-names = "pcie-phy"; - status = "okay"; -}; - -&sdhci0 { - disable-wp; - bootph-all; - ti,driver-strength-ohm = <50>; - status = "okay"; -}; - -/* SDIO */ -&sdhci1 { - pinctrl-names = "default"; - pinctrl-0 = <&sdhci1_pins_default>; - vmmc-supply = <&vcc_3p3_sd_s0>; - vqmmc-supply = <&vcc_3p3_sd_vio_s0>; - bootph-all; - cd-gpios = <&main_gpio1 48 GPIO_ACTIVE_LOW>; - cd-debounce-delay-ms = <100>; - ti,fails-without-test-cd; - ti,driver-strength-ohm = <50>; - status = "okay"; -}; - -&serdes_ln_ctrl { - idle-states = , - ; -}; - -&serdes_wiz0 { - status = "okay"; -}; - -&serdes_wiz1 { - status = "okay"; -}; - -&serdes0 { - serdes0_usb3: phy@0 { - reg = <0>; - #phy-cells = <0>; - resets = <&serdes_wiz0 1>; - cdns,num-lanes = <1>; - cdns,phy-type = ; - }; -}; - -&serdes1 { - serdes1_pcie: phy@0 { - reg = <0>; - #phy-cells = <0>; - resets = <&serdes_wiz1 1>; - cdns,num-lanes = <1>; - cdns,phy-type = ; - }; -}; - -&usb0 { - /* dual role is implemented but not a full featured OTG */ - adp-disable; - hnp-disable; - srp-disable; - dr_mode = "otg"; - usb-role-switch; - role-switch-default-mode = "peripheral"; - status = "okay"; - - port { - usb0_hc: endpoint { - remote-endpoint = <&usb0_connector>; - }; - }; -}; - -&usb0_phy_ctrl { - /* - * Keep this node in the SPL to be able to use the USB controller to - * boot via DFU. - */ - bootph-all; -}; - -&usb1 { - pinctrl-names = "default"; - pinctrl-0 = <&usb1_pins_default>; - - dr_mode = "host"; - maximum-speed = "super-speed"; - phys = <&serdes0_usb3>; - phy-names = "cdns3,usb3-phy"; -}; - -&usbss0 { - ti,vbus-divider; - status = "okay"; -}; - -&usbss1 { - ti,vbus-divider; - status = "okay"; -}; - -/* I2C_PM */ -&wkup_i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&wkup_i2c0_pins_default>; - clock-frequency = <100000>; - status = "okay"; -}; - -/* SER3 */ -&wkup_uart0 { - /* WKUP UART0 is used by Device Manager firmware */ - pinctrl-names = "default"; - pinctrl-0 = <&wkup_uart0_pins_default>; - bootph-all; - status = "reserved"; -}; diff --git a/arch/arm64/boot/dts/ti/k3-am67a-kontron-sa67-gbe1.dtso b/arch/arm64/boot/dts/ti/k3-am67a-kontron-sa67-gbe1.dtso deleted file mode 100644 index 5dfb0b8f10d2..000000000000 --- a/arch/arm64/boot/dts/ti/k3-am67a-kontron-sa67-gbe1.dtso +++ /dev/null @@ -1,26 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only OR MIT -/* - * Second ethernet port GBE1. - * - * Copyright (c) 2025 Kontron Europe GmbH - */ - -/dts-v1/; -/plugin/; - -&cpsw3g_mdio { - #address-cells = <1>; - #size-cells = <0>; - - phy1: ethernet-phy@1 { - reg = <1>; - }; -}; - -&cpsw_port2 { - phy-connection-type = "rgmii-id"; - phy-handle = <&phy1>; - nvmem-cells = <&base_mac_address 1>; - nvmem-cell-names = "mac-address"; - status = "okay"; -}; diff --git a/arch/arm64/boot/dts/ti/k3-am67a-kontron-sa67-gpios.dtso b/arch/arm64/boot/dts/ti/k3-am67a-kontron-sa67-gpios.dtso deleted file mode 100644 index a6ae758e0b3a..000000000000 --- a/arch/arm64/boot/dts/ti/k3-am67a-kontron-sa67-gpios.dtso +++ /dev/null @@ -1,61 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only OR MIT -/* - * SMARC GPIOs. - * - * Copyright (c) 2025 Kontron Europe GmbH - */ - -/dts-v1/; -/plugin/; - -#include -#include "k3-pinctrl.h" - -&main_gpio0 { - pinctrl-names = "default"; - pinctrl-0 = <&main_gpio0_pins_default>; -}; - -&main_gpio1 { - pinctrl-names = "default"; - pinctrl-0 = <&main_gpio1_pins_default>; -}; - -&main_pmx0 { - main_gpio0_pins_default: main-gpio0-default-pins { - pinctrl-single,pins = < - J722S_IOPAD(0x0d0, PIN_INPUT, 7) /* (Y26) VOUT0_DATA6.GPIO0_51 */ - J722S_IOPAD(0x0d4, PIN_INPUT, 7) /* (Y27) VOUT0_DATA7.GPIO0_52 */ - J722S_IOPAD(0x118, PIN_INPUT, 7) /* (H26) MMC2_CLK.GPIO0_69 */ - J722S_IOPAD(0x120, PIN_INPUT, 7) /* (F27) MMC2_CMD.GPIO0_70 */ - >; - }; - - main_gpio1_pins_default: main-gpio1-default-pins { - pinctrl-single,pins = < - J722S_IOPAD(0x194, PIN_INPUT, 7) /* (A25) MCASP0_AXR3.GPIO1_7 */ - J722S_IOPAD(0x198, PIN_INPUT, 7) /* (A26) MCASP0_AXR2.GPIO1_8 */ - J722S_IOPAD(0x1ac, PIN_INPUT, 7) /* (C27) MCASP0_AFSR.GPIO1_13 */ - J722S_IOPAD(0x1b0, PIN_INPUT, 7) /* (F24) MCASP0_ACLKR.GPIO1_14 */ - J722S_IOPAD(0x1d8, PIN_INPUT, 7) /* (D22) MCAN0_TX.GPIO1_24 */ - J722S_IOPAD(0x1dc, PIN_INPUT, 7) /* (C22) MCAN0_RX.GPIO1_25 */ - J722S_IOPAD(0x1e8, PIN_INPUT, 7) /* (C24) I2C1_SCL.GPIO1_28 */ - J722S_IOPAD(0x1ec, PIN_INPUT, 7) /* (A22) I2C1_SDA.GPIO1_29 */ - >; - }; -}; - -&mcu_gpio0 { - pinctrl-names = "default"; - pinctrl-0 = <&mcu_gpio0_pins_default>; -}; - -&mcu_pmx0 { - mcu_gpio0_pins_default: mcu-gpio0-default-pins { - pinctrl-single,pins = < - J722S_IOPAD(0x02c, PIN_INPUT, 7) /* (C4) WKUP_UART0_CTSn.MCU_GPIO0_11 */ - J722S_IOPAD(0x084, PIN_INPUT, 7) /* (F12) WKUP_CLKOUT0.MCU_GPIO0_23 */ - >; - }; - -}; diff --git a/arch/arm64/boot/dts/ti/k3-am67a-kontron-sa67-rtc-rv8263.dtso b/arch/arm64/boot/dts/ti/k3-am67a-kontron-sa67-rtc-rv8263.dtso deleted file mode 100644 index 0a3e9f614c4c..000000000000 --- a/arch/arm64/boot/dts/ti/k3-am67a-kontron-sa67-rtc-rv8263.dtso +++ /dev/null @@ -1,31 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only OR MIT -/* - * Microcrystal RV8263 RTC variant. - * - * Copyright (c) 2025 Kontron Europe GmbH - */ - -/dts-v1/; -/plugin/; - -#include - -&{/} { - aliases { - rtc0 = "/bus@f0000/i2c@20000000/rtc@51"; /* &rtc */ - rtc1 = "/bus@f0000/bus@b00000/rtc@2b1f0000"; /* &wkup_rtc0 */ - }; -}; - -&main_i2c0 { - #address-cells = <1>; - #size-cells = <0>; - - rtc: rtc@51 { - compatible = "microcrystal,rv8263"; - reg = <0x51>; - pinctrl-names = "default"; - pinctrl-0 = <&rtc_pins_default>; - interrupts-extended = <&main_gpio0 36 IRQ_TYPE_EDGE_FALLING>; - }; -}; -- 2.47.3