public inbox for devicetree@vger.kernel.org
 help / color / mirror / Atom feed
From: "Théo Lebrun" <theo.lebrun@bootlin.com>
To: Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	 Conor Dooley <conor+dt@kernel.org>,
	 Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: linux-mips@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	"Vladimir Kondratiev" <vladimir.kondratiev@mobileye.com>,
	"Gregory CLEMENT" <gregory.clement@bootlin.com>,
	"Benoît Monin" <benoit.monin@bootlin.com>,
	"Tawfik Bayouk" <tawfik.bayouk@mobileye.com>,
	"Thomas Petazzoni" <thomas.petazzoni@bootlin.com>,
	"Luca Ceresoli" <luca.ceresoli@bootlin.com>,
	"Théo Lebrun" <theo.lebrun@bootlin.com>
Subject: [PATCH v7 2/3] MIPS: mobileye: eyeq5: add two Cadence GEM Ethernet controllers
Date: Wed, 25 Feb 2026 17:55:23 +0100	[thread overview]
Message-ID: <20260225-macb-phy-v7-2-d3c9842ec931@bootlin.com> (raw)
In-Reply-To: <20260225-macb-phy-v7-0-d3c9842ec931@bootlin.com>

Add both MACB/GEM instances found in the Mobileye EyeQ5 SoC.

Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
---
 arch/mips/boot/dts/mobileye/eyeq5.dtsi | 45 ++++++++++++++++++++++++++++++++++
 1 file changed, 45 insertions(+)

diff --git a/arch/mips/boot/dts/mobileye/eyeq5.dtsi b/arch/mips/boot/dts/mobileye/eyeq5.dtsi
index 36a73e8a63a1..cec5ad875228 100644
--- a/arch/mips/boot/dts/mobileye/eyeq5.dtsi
+++ b/arch/mips/boot/dts/mobileye/eyeq5.dtsi
@@ -77,6 +77,8 @@ aliases {
 		serial0 = &uart0;
 		serial1 = &uart1;
 		serial2 = &uart2;
+		ethernet0 = &macb0;
+		ethernet1 = &macb1;
 	};
 
 	cpu_intc: interrupt-controller {
@@ -231,6 +233,7 @@ olb: system-controller@e00000 {
 			#clock-cells = <1>;
 			clocks = <&xtal>;
 			clock-names = "ref";
+			#phy-cells = <1>;
 		};
 
 		gic: interrupt-controller@140000 {
@@ -305,6 +308,48 @@ gpio1: gpio@1500000 {
 			#interrupt-cells = <2>;
 			resets = <&olb 0 26>;
 		};
+
+		iocu-bus {
+			compatible = "simple-bus";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			dma-coherent;
+			dma-ranges = <0x10 0x00000000 0x0 0x0 0x10 0>;
+
+			macb0: ethernet@2a00000 {
+				compatible = "mobileye,eyeq5-gem";
+				reg = <0x0 0x02a00000 0x0 0x4000>;
+				interrupt-parent = <&gic>;
+				/* One interrupt per queue */
+				interrupts = <GIC_SHARED 23 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SHARED 23 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SHARED 23 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SHARED 23 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "pclk", "hclk", "tsu_clk";
+				clocks = <&pclk>, <&pclk>, <&tsu_clk>;
+				nvmem-cells = <&eth0_mac>;
+				nvmem-cell-names = "mac-address";
+				phys = <&olb 0>;
+			};
+
+			macb1: ethernet@2b00000 {
+				compatible = "mobileye,eyeq5-gem";
+				reg = <0x0 0x02b00000 0x0 0x4000>;
+				interrupt-parent = <&gic>;
+				/* One interrupt per queue */
+				interrupts = <GIC_SHARED 24 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SHARED 24 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SHARED 24 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SHARED 24 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "pclk", "hclk", "tsu_clk";
+				clocks = <&pclk>, <&pclk>, <&tsu_clk>;
+				nvmem-cells = <&eth1_mac>;
+				nvmem-cell-names = "mac-address";
+				phys = <&olb 1>;
+			};
+		};
+
 	};
 };
 

-- 
2.53.0


  parent reply	other threads:[~2026-02-25 16:55 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-02-25 16:55 [PATCH v7 0/3] Add MACB/GEM instances on EyeQ5, and their PHYs Théo Lebrun
2026-02-25 16:55 ` [PATCH v7 1/3] dt-bindings: soc: mobileye: OLB is an Ethernet PHY provider on EyeQ5 Théo Lebrun
2026-02-25 16:55 ` Théo Lebrun [this message]
2026-02-25 16:55 ` [PATCH v7 3/3] MIPS: mobileye: eyeq5-epm: add two Cadence GEM Ethernet PHYs Théo Lebrun
2026-04-06 12:31 ` [PATCH v7 0/3] Add MACB/GEM instances on EyeQ5, and their PHYs Thomas Bogendoerfer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260225-macb-phy-v7-2-d3c9842ec931@bootlin.com \
    --to=theo.lebrun@bootlin.com \
    --cc=benoit.monin@bootlin.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=gregory.clement@bootlin.com \
    --cc=krzk+dt@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mips@vger.kernel.org \
    --cc=luca.ceresoli@bootlin.com \
    --cc=robh@kernel.org \
    --cc=tawfik.bayouk@mobileye.com \
    --cc=thomas.petazzoni@bootlin.com \
    --cc=tsbogend@alpha.franken.de \
    --cc=vladimir.kondratiev@mobileye.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox