[PATCH v3 1/2] dt-bindings: misc: xlnx,axi-fifo-mm-s: convert to json-schema

[Lucas Faria Mendes <lucas.fariamo08@gmail.com>]

Convert the Xilinx AXI-Stream FIFO IP core bindings from legacy text
format to modern YAML json-schema.

While converting, the following changes were made:
- Updated property types for 'xlnx,use-rx-data' and 'xlnx,use-tx-data'
  from uint32 to boolean, as they represent hardware features.
- Removed the rigid 32-bit constraint on data width properties to
  better reflect hardware capabilities.
- Renamed the example node to "fifo" to follow generic naming conventions.
- Removed the legacy text binding file.

Signed-off-by: Lucas Faria Mendes <lucas.fariamo08@gmail.com>
---
 .../bindings/misc/xlnx,axi-fifo-mm-s.yaml     | 95 ++++++++++++++++++
 drivers/staging/axis-fifo/axis-fifo.txt       | 96 -------------------
 2 files changed, 95 insertions(+), 96 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/misc/xlnx,axi-fifo-mm-s.yaml
 delete mode 100644 drivers/staging/axis-fifo/axis-fifo.txt

diff --git a/Documentation/devicetree/bindings/misc/xlnx,axi-fifo-mm-s.yaml b/Documentation/devicetree/bindings/misc/xlnx,axi-fifo-mm-s.yaml
new file mode 100644
index 000000000000..b3e6a2189289
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/xlnx,axi-fifo-mm-s.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/misc/xlnx,axi-fifo-mm-s.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx AXI-Stream FIFO IP core
+
+maintainers:
+  - Jacob Feder <jacobsfeder@gmail.com>
+
+description: |
+  The Xilinx AXI-Stream FIFO IP core has read and write AXI-Stream FIFOs,
+  the contents of which can be accessed from the AXI4 memory-mapped interface.
+  This is useful for transferring data from a processor into the FPGA fabric.
+
+  See Xilinx PG080 document for IP details.
+
+  Currently supports only store-forward mode with a 32-bit AXI4-Lite
+  interface.
+
+properties:
+  compatible:
+    enum:
+      - xlnx,axi-fifo-mm-s-4.1
+      - xlnx,axi-fifo-mm-s-4.2
+      - xlnx,axi-fifo-mm-s-4.3
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-names:
+    items:
+      - const: interrupt
+
+  xlnx,axi-str-rxd-tdata-width:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    const: 32
+    description:
+      AXI-Stream RX data width in bits. Only 32-bit is supported.
+
+  xlnx,axi-str-txd-tdata-width:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    const: 32
+    description:
+      AXI-Stream TX data width in bits. Only 32-bit is supported.
+
+  xlnx,rx-fifo-depth:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Depth of RX FIFO in words.
+
+  xlnx,tx-fifo-depth:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Depth of TX FIFO in words.
+
+  xlnx,use-rx-data:
+    type: boolean
+    description: RX FIFO is enabled.
+
+  xlnx,use-tx-data:
+    type: boolean
+    description: TX FIFO is enabled.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - xlnx,axi-str-rxd-tdata-width
+  - xlnx,axi-str-txd-tdata-width
+  - xlnx,rx-fifo-depth
+  - xlnx,tx-fifo-depth
+  - xlnx,use-tx-data
+
+additionalProperties: false
+
+examples:
+  - |
+    fifo@43c00000 {
+        compatible = "xlnx,axi-fifo-mm-s-4.1";
+        reg = <0x43c00000 0x10000>;
+        interrupt-names = "interrupt";
+        interrupt-parent = <&intc>;
+        interrupts = <0 29 4>;
+        xlnx,axi-str-rxd-tdata-width = <0x20>;
+        xlnx,axi-str-txd-tdata-width = <0x20>;
+        xlnx,rx-fifo-depth = <0x200>;
+        xlnx,tx-fifo-depth = <0x8000>;
+        xlnx,use-tx-data;
+    };
+
diff --git a/drivers/staging/axis-fifo/axis-fifo.txt b/drivers/staging/axis-fifo/axis-fifo.txt
deleted file mode 100644
index 413b81a53202..000000000000
--- a/drivers/staging/axis-fifo/axis-fifo.txt
+++ /dev/null
@@ -1,96 +0,0 @@
-Xilinx AXI-Stream FIFO v4.1 IP core
-
-This IP core has read and write AXI-Stream FIFOs, the contents of which can
-be accessed from the AXI4 memory-mapped interface. This is useful for
-transferring data from a processor into the FPGA fabric. The driver creates
-a character device that can be read/written to with standard
-open/read/write/close.
-
-See Xilinx PG080 document for IP details.
-
-Currently supports only store-forward mode with a 32-bit
-AXI4-Lite interface. DOES NOT support:
-	- cut-through mode
-	- AXI4 (non-lite)
-
-Required properties:
-- compatible: Should be one of:
-    "xlnx,axi-fifo-mm-s-4.1"
-    "xlnx,axi-fifo-mm-s-4.2"
-    "xlnx,axi-fifo-mm-s-4.3"
-- interrupt-names: Should be "interrupt"
-- interrupt-parent: Should be <&intc>
-- interrupts: Should contain interrupts lines.
-- reg: Should contain registers location and length.
-- xlnx,axi-str-rxd-protocol: Should be "XIL_AXI_STREAM_ETH_DATA"
-- xlnx,axi-str-rxd-tdata-width: Should be <0x20>
-- xlnx,axi-str-txc-protocol: Should be "XIL_AXI_STREAM_ETH_CTRL"
-- xlnx,axi-str-txc-tdata-width: Should be <0x20>
-- xlnx,axi-str-txd-protocol: Should be "XIL_AXI_STREAM_ETH_DATA"
-- xlnx,axi-str-txd-tdata-width: Should be <0x20>
-- xlnx,axis-tdest-width: AXI-Stream TDEST width (ignored by the driver)
-- xlnx,axis-tid-width: AXI-Stream TID width (ignored by the driver)
-- xlnx,axis-tuser-width: AXI-Stream TUSER width (ignored by the driver)
-- xlnx,data-interface-type: Should be <0x0> (ignored by the driver)
-- xlnx,has-axis-tdest: Should be <0x0> (this feature isn't supported)
-- xlnx,has-axis-tid: Should be <0x0> (this feature isn't supported)
-- xlnx,has-axis-tkeep: Should be <0x0> (this feature isn't supported)
-- xlnx,has-axis-tstrb: Should be <0x0> (this feature isn't supported)
-- xlnx,has-axis-tuser: Should be <0x0> (this feature isn't supported)
-- xlnx,rx-fifo-depth: Depth of RX FIFO in words
-- xlnx,rx-fifo-pe-threshold: RX programmable empty interrupt threshold
-	(ignored by the driver)
-- xlnx,rx-fifo-pf-threshold: RX programmable full interrupt threshold
-	(ignored by the driver)
-- xlnx,s-axi-id-width: Should be <0x4> (ignored by the driver)
-- xlnx,s-axi4-data-width: Should be <0x20> (ignored by the driver)
-- xlnx,select-xpm: Should be <0x0> (ignored by the driver)
-- xlnx,tx-fifo-depth: Depth of TX FIFO in words
-- xlnx,tx-fifo-pe-threshold: TX programmable empty interrupt threshold
-	(ignored by the driver)
-- xlnx,tx-fifo-pf-threshold: TX programmable full interrupt threshold
-	(ignored by the driver)
-- xlnx,use-rx-cut-through: Should be <0x0> (this feature isn't supported)
-- xlnx,use-rx-data: <0x1> if RX FIFO is enabled, <0x0> otherwise
-- xlnx,use-tx-ctrl: Should be <0x0> (this feature isn't supported)
-- xlnx,use-tx-cut-through: Should be <0x0> (this feature isn't supported)
-- xlnx,use-tx-data: <0x1> if TX FIFO is enabled, <0x0> otherwise
-
-Example:
-
-axi_fifo_mm_s_0: axi_fifo_mm_s@43c00000 {
-	compatible = "xlnx,axi-fifo-mm-s-4.1";
-	interrupt-names = "interrupt";
-	interrupt-parent = <&intc>;
-	interrupts = <0 29 4>;
-	reg = <0x43c00000 0x10000>;
-	xlnx,axi-str-rxd-protocol = "XIL_AXI_STREAM_ETH_DATA";
-	xlnx,axi-str-rxd-tdata-width = <0x20>;
-	xlnx,axi-str-txc-protocol = "XIL_AXI_STREAM_ETH_CTRL";
-	xlnx,axi-str-txc-tdata-width = <0x20>;
-	xlnx,axi-str-txd-protocol = "XIL_AXI_STREAM_ETH_DATA";
-	xlnx,axi-str-txd-tdata-width = <0x20>;
-	xlnx,axis-tdest-width = <0x4>;
-	xlnx,axis-tid-width = <0x4>;
-	xlnx,axis-tuser-width = <0x4>;
-	xlnx,data-interface-type = <0x0>;
-	xlnx,has-axis-tdest = <0x0>;
-	xlnx,has-axis-tid = <0x0>;
-	xlnx,has-axis-tkeep = <0x0>;
-	xlnx,has-axis-tstrb = <0x0>;
-	xlnx,has-axis-tuser = <0x0>;
-	xlnx,rx-fifo-depth = <0x200>;
-	xlnx,rx-fifo-pe-threshold = <0x2>;
-	xlnx,rx-fifo-pf-threshold = <0x1fb>;
-	xlnx,s-axi-id-width = <0x4>;
-	xlnx,s-axi4-data-width = <0x20>;
-	xlnx,select-xpm = <0x0>;
-	xlnx,tx-fifo-depth = <0x8000>;
-	xlnx,tx-fifo-pe-threshold = <0x200>;
-	xlnx,tx-fifo-pf-threshold = <0x7ffb>;
-	xlnx,use-rx-cut-through = <0x0>;
-	xlnx,use-rx-data = <0x0>;
-	xlnx,use-tx-ctrl = <0x0>;
-	xlnx,use-tx-cut-through = <0x0>;
-	xlnx,use-tx-data = <0x1>;
-};
-- 
2.53.0