[PATCH v2 9/9] arm64: tegra: Add iommu-map and enable GPCDMA in Tegra264

[Akhil R <akhilrajeev@nvidia.com>]

Add iommu-map the GPCDMA controller node so that each channel uses a
separate stream ID and gets its own IOMMU domain for memory. Enable
GCPDMA as well.

Also remove the fallback compatible string "nvidia,tegra186-gpcdma".
Tegra186 compatible cannot work on Tegra264 because of the register
offset changes and absence of reset property.

Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
---
 arch/arm64/boot/dts/nvidia/tegra264-p3834.dtsi | 4 ++++
 arch/arm64/boot/dts/nvidia/tegra264.dtsi       | 3 ++-
 2 files changed, 6 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/nvidia/tegra264-p3834.dtsi b/arch/arm64/boot/dts/nvidia/tegra264-p3834.dtsi
index 7e2c3e66c2ab..c8beb616964a 100644
--- a/arch/arm64/boot/dts/nvidia/tegra264-p3834.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra264-p3834.dtsi
@@ -16,6 +16,10 @@ serial@c4e0000 {
 		serial@c5a0000 {
 			status = "okay";
 		};
+
+		dma-controller@8400000 {
+			status = "okay";
+		};
 	};
 
 	bus@8100000000 {
diff --git a/arch/arm64/boot/dts/nvidia/tegra264.dtsi b/arch/arm64/boot/dts/nvidia/tegra264.dtsi
index 7644a41d5f72..9821d085c766 100644
--- a/arch/arm64/boot/dts/nvidia/tegra264.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra264.dtsi
@@ -3208,7 +3208,7 @@ agic_page5: interrupt-controller@99b0000 {
 		};
 
 		gpcdma: dma-controller@8400000 {
-			compatible = "nvidia,tegra264-gpcdma", "nvidia,tegra186-gpcdma";
+			compatible = "nvidia,tegra264-gpcdma";
 			reg = <0x0 0x08400000 0x0 0x210000>;
 			interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>,
@@ -3244,6 +3244,7 @@ gpcdma: dma-controller@8400000 {
 				     <GIC_SPI 615 IRQ_TYPE_LEVEL_HIGH>;
 			#dma-cells = <1>;
 			iommus = <&smmu1 0x00000800>;
+			iommu-map = <1 &smmu1 0x801 31>;
 			dma-coherent;
 			dma-channel-mask = <0xfffffffe>;
 			status = "disabled";
-- 
2.50.1