From: Charan Pedumuru <charan.pedumuru@gmail.com>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Claudiu Beznea <claudiu.beznea@tuxon.dev>,
Herve Codina <herve.codina@bootlin.com>,
Nicolas Ferre <nicolas.ferre@microchip.com>,
Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: linux-usb@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Charan Pedumuru <charan.pedumuru@gmail.com>
Subject: [PATCH v3 0/5] dt-bindings: usb: atmel: convert Atmel USB controller bindings to YAML
Date: Sat, 07 Mar 2026 09:16:17 +0000 [thread overview]
Message-ID: <20260307-atmel-usb-v3-0-3dc48fe772be@gmail.com> (raw)
This patch series converts the legacy text-based Device Tree bindings for
Atmel/Microchip USB controllers to DT schema (YAML) format.
Note:
The patch "dt-bindings: usb: atmel,at91sam9rl-udc: convert to DT schema"
depends on the patch "arm: dts: at91: remove unused #address-cells/#size-cells
from sam9x60 UDC node". If the DT schema patch is applied before the DTS
cleanup patch, `dtbs_check` will fail due to the presence of the removed
properties in the existing DTS.
Signed-off-by: Charan Pedumuru <charan.pedumuru@gmail.com>
---
Changes in v3:
- sam9x60: Add a new patch removing the unnecessary #address-cells and
#size-cells properties from the sam9x60 UDC node.
- atmel,at91sam9rl-udc: Remove #address-cells and #size-cells from the
atmel,at91sam9rl-udc binding properties.
- generic-ohci: Add an else condition to the generic-ohci schema properties
for improved validation precision.
- Link to v2: https://lore.kernel.org/r/20260224-atmel-usb-v2-0-6d6a615c9c47@gmail.com
Changes in v2:
- Drop the separate YAML patches for OHCI and EHCI.
- Add the compatibles "atmel,at91rm9200-ohci" and "atmel,at91sam9g45-ehci"
to the existing generic OHCI and EHCI binding files.
- Link to v1: https://lore.kernel.org/r/20260201-atmel-usb-v1-0-d1a3e93003f1@gmail.com
---
Charan Pedumuru (5):
arm: dts: at91: remove unused #address-cells/#size-cells from sam9x60 udc node
dt-bindings: usb: generic-ohci: add AT91RM9200 OHCI binding support
dt-bindings: usb: generic-ehci: fix schema structure and add at91sam9g45 constraints
dt-bindings: usb: atmel,at91rm9200-udc: convert to DT schema
dt-bindings: usb: atmel,at91sam9rl-udc: convert to DT schema
.../bindings/usb/atmel,at91rm9200-udc.yaml | 77 +++++++++++++
.../bindings/usb/atmel,at91sam9rl-udc.yaml | 75 +++++++++++++
.../devicetree/bindings/usb/atmel-usb.txt | 125 ---------------------
.../devicetree/bindings/usb/generic-ehci.yaml | 46 +++++---
.../devicetree/bindings/usb/generic-ohci.yaml | 33 ++++++
arch/arm/boot/dts/microchip/sam9x60.dtsi | 2 -
6 files changed, 218 insertions(+), 140 deletions(-)
---
base-commit: 3f24e4edcd1b8981c6b448ea2680726dedd87279
change-id: 20260129-atmel-usb-37f89a141e48
Best regards,
--
Charan Pedumuru <charan.pedumuru@gmail.com>
next reply other threads:[~2026-03-07 9:16 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-07 9:16 Charan Pedumuru [this message]
2026-03-07 9:16 ` [PATCH v3 1/5] arm: dts: at91: remove unused #address-cells/#size-cells from sam9x60 udc node Charan Pedumuru
2026-03-08 16:06 ` Claudiu Beznea
2026-03-07 9:16 ` [PATCH v3 2/5] dt-bindings: usb: generic-ohci: add AT91RM9200 OHCI binding support Charan Pedumuru
2026-03-08 9:23 ` Krzysztof Kozlowski
2026-03-08 9:28 ` Krzysztof Kozlowski
2026-03-13 6:34 ` Charan Pedumuru
2026-03-13 6:31 ` Charan Pedumuru
2026-03-07 9:16 ` [PATCH v3 3/5] dt-bindings: usb: generic-ehci: fix schema structure and add at91sam9g45 constraints Charan Pedumuru
2026-03-07 9:16 ` [PATCH v3 4/5] dt-bindings: usb: atmel,at91rm9200-udc: convert to DT schema Charan Pedumuru
2026-03-08 9:27 ` Krzysztof Kozlowski
2026-03-13 6:55 ` Charan Pedumuru
2026-03-07 9:16 ` [PATCH v3 5/5] dt-bindings: usb: atmel,at91sam9rl-udc: " Charan Pedumuru
2026-03-08 9:29 ` Krzysztof Kozlowski
2026-03-13 13:29 ` Charan Pedumuru
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260307-atmel-usb-v3-0-3dc48fe772be@gmail.com \
--to=charan.pedumuru@gmail.com \
--cc=alexandre.belloni@bootlin.com \
--cc=claudiu.beznea@tuxon.dev \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=herve.codina@bootlin.com \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=nicolas.ferre@microchip.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox