[PATCH v3 4/5] dt-bindings: usb: atmel,at91rm9200-udc: convert to DT schema

[Charan Pedumuru <charan.pedumuru@gmail.com>]

Convert Atmel AT91 USB Device Controller (UDC) binding to DT schema.
Changes during conversion:
- Include "atmel,pullup-gpio" and "atmel,matrix" in the properties since
  they are required by existing in-tree DTS definitions.

Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Charan Pedumuru <charan.pedumuru@gmail.com>
---
 .../bindings/usb/atmel,at91rm9200-udc.yaml         | 77 ++++++++++++++++++++++
 1 file changed, 77 insertions(+)

diff --git a/Documentation/devicetree/bindings/usb/atmel,at91rm9200-udc.yaml b/Documentation/devicetree/bindings/usb/atmel,at91rm9200-udc.yaml
new file mode 100644
index 000000000000..6961cd5d5d89
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/atmel,at91rm9200-udc.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/atmel,at91rm9200-udc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel AT91 USB Device Controller (UDC)
+
+maintainers:
+  - Nicolas Ferre <nicolas.ferre@microchip.com>
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+
+description:
+  The Atmel AT91 USB Device Controller provides USB gadget (device-mode)
+  functionality on AT91 SoCs. It requires a peripheral clock and an AHB
+  clock for operation and may optionally control VBUS power through a GPIO.
+
+properties:
+  compatible:
+    enum:
+      - atmel,at91rm9200-udc
+      - atmel,at91sam9260-udc
+      - atmel,at91sam9261-udc
+      - atmel,at91sam9263-udc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: hclk
+
+  atmel,vbus-gpio:
+    description: GPIO used to enable or control VBUS power for the USB bus.
+    maxItems: 1
+
+  atmel,matrix:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: Phandle to the Atmel bus matrix controller.
+
+  atmel,pullup-gpio:
+    description:
+      GPIO controlling the USB D+ pull-up resistor used to signal device
+      connection to the host.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/at91.h>
+    #include <dt-bindings/gpio/gpio.h>
+    gadget@fffa4000 {
+        compatible = "atmel,at91rm9200-udc";
+        reg = <0xfffa4000 0x4000>;
+        interrupts = <11 IRQ_TYPE_LEVEL_HIGH 2>;
+        clocks = <&udc_clk>, <&udpck>;
+        clock-names = "pclk", "hclk";
+        atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
+    };
+...

-- 
2.53.0