From: Gary Yang <gary.yang@cixtech.com>
To: lpieralisi@kernel.org, kwilczynski@kernel.org, mani@kernel.org,
robh@kernel.org, bhelgaas@google.com, krzk+dt@kernel.org,
conor+dt@kernel.org, peter.chen@cixtech.com
Cc: linux-pci@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
cix-kernel-upstream@cixtech.com,
Gary Yang <gary.yang@cixtech.com>
Subject: [PATCH v3 2/2] arm64: dts: cix: Add scmi powerdomain nodes for sky1
Date: Fri, 13 Mar 2026 14:03:08 +0800 [thread overview]
Message-ID: <20260313060308.1300518-3-gary.yang@cixtech.com> (raw)
In-Reply-To: <20260313060308.1300518-1-gary.yang@cixtech.com>
Add a second SCMI channel using SMC transport to communicate with TF-A
for power domain management on the Sky1 SoC.
Signed-off-by: Gary Yang <gary.yang@cixtech.com>
---
arch/arm64/boot/dts/cix/sky1-power.h | 34 ++++++++++++++++++++++++++++
arch/arm64/boot/dts/cix/sky1.dtsi | 21 +++++++++++++++++
2 files changed, 55 insertions(+)
create mode 100644 arch/arm64/boot/dts/cix/sky1-power.h
diff --git a/arch/arm64/boot/dts/cix/sky1-power.h b/arch/arm64/boot/dts/cix/sky1-power.h
new file mode 100644
index 000000000000..743c0e5558ee
--- /dev/null
+++ b/arch/arm64/boot/dts/cix/sky1-power.h
@@ -0,0 +1,34 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright 2026 Cix Technology Group Co., Ltd.
+ */
+
+#ifndef __SKY1_POWER_H__
+#define __SKY1_POWER_H__
+
+/* The Rich OS need flow the macro */
+#define SKY1_PD_AUDIO 0
+#define SKY1_PD_PCIE_CTRL0 1
+#define SKY1_PD_PCIE_DUMMY 2
+#define SKY1_PD_PCIEHUB 3
+#define SKY1_PD_MMHUB 4
+#define SKY1_PD_MMHUB_SMMU 5
+#define SKY1_PD_DPU0 6
+#define SKY1_PD_DPU1 7
+#define SKY1_PD_DPU2 8
+#define SKY1_PD_DPU3 9
+#define SKY1_PD_DPU4 10
+#define SKY1_PD_VPU_TOP 11
+#define SKY1_PD_VPU_CORE0 12
+#define SKY1_PD_VPU_CORE1 13
+#define SKY1_PD_VPU_CORE2 14
+#define SKY1_PD_VPU_CORE3 15
+#define SKY1_PD_NPU_CORE0 16
+#define SKY1_PD_NPU_CORE1 17
+#define SKY1_PD_NPU_CORE2 18
+#define SKY1_PD_NPU_TOP 19
+#define SKY1_PD_ISP0 20
+#define SKY1_PD_GPU 21
+#define SKY1_PD_MAX 22
+
+#endif
diff --git a/arch/arm64/boot/dts/cix/sky1.dtsi b/arch/arm64/boot/dts/cix/sky1.dtsi
index 64b76905cbff..495ea91a63f5 100644
--- a/arch/arm64/boot/dts/cix/sky1.dtsi
+++ b/arch/arm64/boot/dts/cix/sky1.dtsi
@@ -6,6 +6,7 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/cix,sky1.h>
+#include "sky1-power.h"
/ {
interrupt-parent = <&gic>;
@@ -168,6 +169,19 @@ scmi_clk: protocol@14 {
#clock-cells = <1>;
};
};
+
+ ap_to_tfa_scmi: scmi-1 {
+ compatible = "arm,scmi-smc";
+ arm,smc-id = <0xc2000001>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ shmem = <&ap_tfa_scmi_mem>;
+
+ smc_devpd: protocol@11 {
+ reg = <0x11>;
+ #power-domain-cells = <1>;
+ };
+ };
};
pmu-a520 {
@@ -428,6 +442,7 @@ pcie_x8_rc: pcie@a010000 {
#size-cells = <2>;
bus-range = <0xc0 0xff>;
device_type = "pci";
+ power-domains = <&smc_devpd SKY1_PD_PCIE_CTRL0>;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
interrupt-map = <0 0 0 1 &gic 0 0 GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH 0>,
@@ -572,6 +587,12 @@ iomuxc_s5: pinctrl@16007000 {
compatible = "cix,sky1-pinctrl-s5";
reg = <0x0 0x16007000 0x0 0x1000>;
};
+
+ ap_tfa_scmi_mem: shmem@84380000 {
+ compatible = "arm,scmi-shmem";
+ reg = <0x0 0x84380000 0x0 0x80>;
+ reg-io-width = <4>;
+ };
};
timer {
--
2.49.0
prev parent reply other threads:[~2026-03-13 6:03 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-13 6:03 [PATCH v3 0/2] Add scmi powerdomain for sky1 Gary Yang
2026-03-13 6:03 ` [PATCH v3 1/2] dt-bindings: PCI: cix,sky1-pcie-host: Add power-domains Gary Yang
2026-03-13 8:25 ` Krzysztof Kozlowski
2026-03-13 8:53 ` 回复: " Gary Yang
2026-03-13 9:00 ` Krzysztof Kozlowski
2026-03-13 6:03 ` Gary Yang [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260313060308.1300518-3-gary.yang@cixtech.com \
--to=gary.yang@cixtech.com \
--cc=bhelgaas@google.com \
--cc=cix-kernel-upstream@cixtech.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=kwilczynski@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lpieralisi@kernel.org \
--cc=mani@kernel.org \
--cc=peter.chen@cixtech.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox