[PATCH v12 13/17] media: ti: j721e-csi2rx: Submit all available buffers

[Rishikesh Donadkar <r-donadkar@ti.com>]

From: Jai Luthra <j-luthra@ti.com>

We already make sure to submit all available buffers to DMA in each DMA
completion callback.

Move that logic in a separate function, and use it during stream start
as well, as most application queue all their buffers before stream on.

Signed-off-by: Jai Luthra <j-luthra@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Yemike Abhilash Chandra <y-abhilashchandra@ti.com>
Co-developed-by: Rishikesh Donadkar <r-donadkar@ti.com>
Signed-off-by: Rishikesh Donadkar <r-donadkar@ti.com>
---
 .../platform/ti/j721e-csi2rx/j721e-csi2rx.c   | 42 +++++++++++--------
 1 file changed, 24 insertions(+), 18 deletions(-)

diff --git a/drivers/media/platform/ti/j721e-csi2rx/j721e-csi2rx.c b/drivers/media/platform/ti/j721e-csi2rx/j721e-csi2rx.c
index 5f4627f8c4921..7d50b8dd8a6a4 100644
--- a/drivers/media/platform/ti/j721e-csi2rx/j721e-csi2rx.c
+++ b/drivers/media/platform/ti/j721e-csi2rx/j721e-csi2rx.c
@@ -663,11 +663,32 @@ static int ti_csi2rx_drain_dma(struct ti_csi2rx_ctx *ctx)
 	return ret;
 }
 
+static int ti_csi2rx_dma_submit_pending(struct ti_csi2rx_ctx *ctx)
+{
+	struct ti_csi2rx_dma *dma = &ctx->dma;
+	struct ti_csi2rx_buffer *buf;
+	int ret = 0;
+
+	/* If there are more buffers to process then start their transfer. */
+	while (!list_empty(&dma->queue)) {
+		buf = list_entry(dma->queue.next, struct ti_csi2rx_buffer, list);
+		ret = ti_csi2rx_start_dma(ctx, buf);
+		if (ret) {
+			dev_err(ctx->csi->dev,
+				"Failed to queue the next buffer for DMA\n");
+			vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR);
+			list_del(&buf->list);
+		} else {
+			list_move_tail(&buf->list, &dma->submitted);
+		}
+	}
+	return ret;
+}
+
 static void ti_csi2rx_dma_callback(void *param)
 {
 	struct ti_csi2rx_buffer *buf = param;
 	struct ti_csi2rx_ctx *ctx = buf->ctx;
-	struct ti_csi2rx_dev *csi = ctx->csi;
 	struct ti_csi2rx_dma *dma = &ctx->dma;
 	unsigned long flags;
 
@@ -684,18 +705,7 @@ static void ti_csi2rx_dma_callback(void *param)
 	vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_DONE);
 	list_del(&buf->list);
 
-	/* If there are more buffers to process then start their transfer. */
-	while (!list_empty(&dma->queue)) {
-		buf = list_entry(dma->queue.next, struct ti_csi2rx_buffer, list);
-
-		if (ti_csi2rx_start_dma(ctx, buf)) {
-			dev_err(csi->dev, "Failed to queue the next buffer for DMA\n");
-			list_del(&buf->list);
-			vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR);
-		} else {
-			list_move_tail(&buf->list, &dma->submitted);
-		}
-	}
+	ti_csi2rx_dma_submit_pending(ctx);
 
 	if (list_empty(&dma->submitted))
 		dma->state = TI_CSI2RX_DMA_IDLE;
@@ -1135,7 +1145,6 @@ static int ti_csi2rx_sd_enable_streams(struct v4l2_subdev *sd,
 	struct ti_csi2rx_ctx *ctx = &csi->ctx[pad - TI_CSI2RX_PAD_FIRST_SOURCE];
 	struct ti_csi2rx_dma *dma = &ctx->dma;
 	struct media_pad *remote_pad;
-	struct ti_csi2rx_buffer *buf;
 	unsigned long flags;
 	u64 sink_streams;
 	int ret = 0;
@@ -1160,16 +1169,13 @@ static int ti_csi2rx_sd_enable_streams(struct v4l2_subdev *sd,
 	ctx->sequence = 0;
 
 	spin_lock_irqsave(&dma->lock, flags);
-	buf = list_entry(dma->queue.next, struct ti_csi2rx_buffer, list);
 
-	ret = ti_csi2rx_start_dma(ctx, buf);
+	ret = ti_csi2rx_dma_submit_pending(ctx);
 	if (ret) {
-		dev_err(csi->dev, "Failed to start DMA: %d\n", ret);
 		spin_unlock_irqrestore(&dma->lock, flags);
 		return ret;
 	}
 
-	list_move_tail(&buf->list, &dma->submitted);
 	dma->state = TI_CSI2RX_DMA_ACTIVE;
 	spin_unlock_irqrestore(&dma->lock, flags);
 
-- 
2.34.1