From: Luca Leonardo Scorcia <l.scorcia@gmail.com>
To: linux-mediatek@lists.infradead.org
Cc: Luca Leonardo Scorcia <l.scorcia@gmail.com>,
Dmitry Torokhov <dmitry.torokhov@gmail.com>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Sen Chu <sen.chu@mediatek.com>,
Sean Wang <sean.wang@mediatek.com>,
Macpaul Lin <macpaul.lin@mediatek.com>,
Lee Jones <lee@kernel.org>,
Matthias Brugger <matthias.bgg@gmail.com>,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@collabora.com>,
Linus Walleij <linusw@kernel.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>,
Julien Massot <julien.massot@collabora.com>,
Gary Bisson <bisson.gary@gmail.com>,
Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>,
Val Packett <val@packett.cool>,
Fabien Parent <parent.f@gmail.com>,
Chen Zhong <chen.zhong@mediatek.com>,
linux-input@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, linux-gpio@vger.kernel.org
Subject: [PATCH v3 3/9] dt-bindings: regulator: Document MediaTek MT6392 PMIC Regulators
Date: Tue, 17 Mar 2026 18:43:06 +0000 [thread overview]
Message-ID: <20260317184507.523060-4-l.scorcia@gmail.com> (raw)
In-Reply-To: <20260317184507.523060-1-l.scorcia@gmail.com>
Add bindings for the regulators found in the MediaTek MT6392 PMIC,
usually found in board designs using the MediaTek MT8516/MT8167 SoCs.
Signed-off-by: Luca Leonardo Scorcia <l.scorcia@gmail.com>
---
.../regulator/mediatek,mt6392-regulator.yaml | 318 ++++++++++++++++++
.../regulator/mediatek,mt6392-regulator.h | 24 ++
2 files changed, 342 insertions(+)
create mode 100644 Documentation/devicetree/bindings/regulator/mediatek,mt6392-regulator.yaml
create mode 100644 include/dt-bindings/regulator/mediatek,mt6392-regulator.h
diff --git a/Documentation/devicetree/bindings/regulator/mediatek,mt6392-regulator.yaml b/Documentation/devicetree/bindings/regulator/mediatek,mt6392-regulator.yaml
new file mode 100644
index 000000000000..fa4aad2dcbe8
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/mediatek,mt6392-regulator.yaml
@@ -0,0 +1,318 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/mediatek,mt6392-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT6392 Regulator
+
+description:
+ Regulator node of the PMIC. This node should under the PMIC's device node.
+ All voltage regulators provided by the PMIC are described as sub-nodes of
+ this node.
+
+properties:
+ compatible:
+ items:
+ - const: mediatek,mt6392-regulator
+
+patternProperties:
+ "^(buck_)?v(core|proc|sys)$":
+ description: Buck regulators
+ type: object
+ $ref: regulator.yaml#
+ properties:
+ regulator-allowed-modes:
+ description: |
+ BUCK regulators can set regulator-initial-mode and regulator-allowed-modes to
+ values specified in dt-bindings/regulator/mediatek,mt6392-regulator.h
+ items:
+ enum: [0, 1]
+ unevaluatedProperties: false
+
+ "^(ldo_)?v(adc18|camio|cn18|io18)$":
+ description: LDOs with fixed 1.8V output
+ type: object
+ $ref: regulator.yaml#
+ properties:
+ regulator-allowed-modes:
+ description: |
+ LDO regulators can set regulator-initial-mode and regulator-allowed-modes to
+ values specified in dt-bindings/regulator/mediatek,mt6392-regulator.h
+ items:
+ enum: [0, 1]
+ unevaluatedProperties: false
+
+ "^(ldo_)?v(xo22)$":
+ description: LDOs with fixed 2.2V output
+ type: object
+ $ref: regulator.yaml#
+ properties:
+ regulator-allowed-modes:
+ description: |
+ LDO regulators can set regulator-initial-mode and regulator-allowed-modes to
+ values specified in dt-bindings/regulator/mediatek,mt6392-regulator.h
+ items:
+ enum: [0, 1]
+ unevaluatedProperties: false
+
+ "^(ldo_)?v(m25)$":
+ description: LDOs with fixed 2.5V output
+ type: object
+ $ref: regulator.yaml#
+ properties:
+ regulator-allowed-modes:
+ description: |
+ LDO regulators can set regulator-initial-mode and regulator-allowed-modes to
+ values specified in dt-bindings/regulator/mediatek,mt6392-regulator.h
+ items:
+ enum: [0, 1]
+ unevaluatedProperties: false
+
+ "^(ldo_)?v(aud28|io28)$":
+ description: LDOs with fixed 2.8V output w/ mode
+ type: object
+ $ref: regulator.yaml#
+ properties:
+ regulator-allowed-modes:
+ description: |
+ LDO regulators can set regulator-initial-mode and regulator-allowed-modes to
+ values specified in dt-bindings/regulator/mediatek,mt6392-regulator.h
+ items:
+ enum: [0, 1]
+ unevaluatedProperties: false
+
+ "^(ldo_)?v(cama)$":
+ description: LDOs with fixed 2.8V output w/o mode
+ type: object
+ $ref: regulator.yaml#
+ unevaluatedProperties: false
+
+ "^(ldo_)?vusb$":
+ description: LDOs with fixed 3.3V output
+ type: object
+ $ref: regulator.yaml#
+ properties:
+ regulator-allowed-modes:
+ description: |
+ LDO regulators can set regulator-initial-mode and regulator-allowed-modes to
+ values specified in dt-bindings/regulator/mediatek,mt6392-regulator.h
+ items:
+ enum: [0, 1]
+ unevaluatedProperties: false
+
+ "^(ldo_)?v(aud22|camaf|camd|cn35|efuse|emc3v3|gp1|gp2|m|mc|mch)$":
+ description: LDOs with variable output
+ type: object
+ $ref: regulator.yaml#
+ properties:
+ regulator-allowed-modes: false
+ unevaluatedProperties: false
+
+required:
+ - compatible
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ mt6392_regulators: regulators {
+ compatible = "mediatek,mt6392-regulator";
+
+ mt6392_vproc_reg: buck_vproc {
+ regulator-name = "vproc";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <12500>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6392_vsys_reg: buck_vsys {
+ regulator-name = "vsys";
+ regulator-min-microvolt = <1400000>;
+ regulator-max-microvolt = <2987500>;
+ regulator-ramp-delay = <25000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6392_vcore_reg: buck_vcore {
+ regulator-name = "vcore";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <12500>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6392_vxo22_reg: ldo_vxo22 {
+ regulator-name = "vxo22";
+ regulator-min-microvolt = <2200000>;
+ regulator-max-microvolt = <2200000>;
+ regulator-enable-ramp-delay = <110>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6392_vaud22_reg: ldo_vaud22 {
+ regulator-name = "vaud22";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2200000>;
+ regulator-enable-ramp-delay = <264>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6392_vcama_reg: ldo_vcama {
+ regulator-name = "vcama";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-enable-ramp-delay = <264>;
+ };
+
+ mt6392_vaud28_reg: ldo_vaud28 {
+ regulator-name = "vaud28";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-enable-ramp-delay = <264>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6392_vadc18_reg: ldo_vadc18 {
+ regulator-name = "vadc18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <264>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6392_vcn35_reg: ldo_vcn35 {
+ regulator-name = "vcn35";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3600000>;
+ regulator-enable-ramp-delay = <264>;
+ };
+
+ mt6392_vio28_reg: ldo_vio28 {
+ regulator-name = "vio28";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-enable-ramp-delay = <264>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6392_vusb_reg: ldo_vusb {
+ regulator-name = "vusb";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <264>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6392_vmc_reg: ldo_vmc {
+ regulator-name = "vmc";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <264>;
+ regulator-boot-on;
+ };
+
+ mt6392_vmch_reg: ldo_vmch {
+ regulator-name = "vmch";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <264>;
+ regulator-boot-on;
+ };
+
+ mt6392_vemc3v3_reg: ldo_vemc3v3 {
+ regulator-name = "vemc3v3";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <264>;
+ regulator-boot-on;
+ };
+
+ mt6392_vgp1_reg: ldo_vgp1 {
+ regulator-name = "vgp1";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <264>;
+ };
+
+ mt6392_vgp2_reg: ldo_vgp2 {
+ regulator-name = "vgp2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <264>;
+ };
+
+ mt6392_vcn18_reg: ldo_vcn18 {
+ regulator-name = "vcn18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <264>;
+ };
+
+ mt6392_vcamaf_reg: ldo_vcamaf {
+ regulator-name = "vcamaf";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <264>;
+ };
+
+ mt6392_vm_reg: ldo_vm {
+ regulator-name = "vm";
+ regulator-min-microvolt = <1240000>;
+ regulator-max-microvolt = <1390000>;
+ regulator-enable-ramp-delay = <264>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6392_vio18_reg: ldo_vio18 {
+ regulator-name = "vio18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <264>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6392_vcamd_reg: ldo_vcamd {
+ regulator-name = "vcamd";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <264>;
+ };
+
+ mt6392_vcamio_reg: ldo_vcamio {
+ regulator-name = "vcamio";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <264>;
+ };
+
+ mt6392_vm25_reg: ldo_vm25 {
+ regulator-name = "vm25";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-enable-ramp-delay = <264>;
+ };
+
+ mt6392_vefuse_reg: ldo_vefuse {
+ regulator-name = "vefuse";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-enable-ramp-delay = <264>;
+ };
+ };
diff --git a/include/dt-bindings/regulator/mediatek,mt6392-regulator.h b/include/dt-bindings/regulator/mediatek,mt6392-regulator.h
new file mode 100644
index 000000000000..8bd1a13faad8
--- /dev/null
+++ b/include/dt-bindings/regulator/mediatek,mt6392-regulator.h
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+
+#ifndef _DT_BINDINGS_REGULATOR_MEDIATEK_MT6392_H_
+#define _DT_BINDINGS_REGULATOR_MEDIATEK_MT6392_H_
+
+/*
+ * Buck mode constants which may be used in devicetree properties (eg.
+ * regulator-initial-mode, regulator-allowed-modes).
+ * See the manufacturer's datasheet for more information on these modes.
+ */
+
+#define MT6392_BUCK_MODE_AUTO 0
+#define MT6392_BUCK_MODE_FORCE_PWM 1
+
+/*
+ * LDO mode constants which may be used in devicetree properties (eg.
+ * regulator-initial-mode, regulator-allowed-modes).
+ * See the manufacturer's datasheet for more information on these modes.
+ */
+
+#define MT6392_LDO_MODE_NORMAL 0
+#define MT6392_LDO_MODE_LP 1
+
+#endif
--
2.43.0
next prev parent reply other threads:[~2026-03-17 18:46 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-17 18:43 [PATCH v3 0/9] Add support for mt6392 PMIC Luca Leonardo Scorcia
2026-03-17 18:43 ` [PATCH v3 1/9] dt-bindings: mfd: mt6397: Add bindings for MT6392 PMIC Luca Leonardo Scorcia
2026-03-18 7:37 ` Krzysztof Kozlowski
2026-03-18 7:47 ` Krzysztof Kozlowski
2026-03-18 12:39 ` AngeloGioacchino Del Regno
2026-03-17 18:43 ` [PATCH v3 2/9] dt-bindings: input: mtk-pmic-keys: add MT6392 binding definition Luca Leonardo Scorcia
2026-03-18 12:39 ` AngeloGioacchino Del Regno
2026-03-17 18:43 ` Luca Leonardo Scorcia [this message]
2026-03-18 7:43 ` [PATCH v3 3/9] dt-bindings: regulator: Document MediaTek MT6392 PMIC Regulators Krzysztof Kozlowski
2026-03-18 21:25 ` Luca Leonardo Scorcia
2026-03-18 22:14 ` Krzysztof Kozlowski
2026-03-19 4:53 ` Chen-Yu Tsai
2026-03-19 7:23 ` Krzysztof Kozlowski
2026-03-18 12:39 ` AngeloGioacchino Del Regno
2026-03-19 4:56 ` Chen-Yu Tsai
2026-03-17 18:43 ` [PATCH v3 4/9] dt-bindings: pinctrl: mt65xx: Document MT6392 pinctrl Luca Leonardo Scorcia
2026-03-18 12:39 ` AngeloGioacchino Del Regno
2026-03-17 18:43 ` [PATCH v3 5/9] mfd: mt6397: Add support for MT6392 pmic Luca Leonardo Scorcia
2026-03-18 12:39 ` AngeloGioacchino Del Regno
2026-03-26 12:10 ` Lee Jones
2026-03-17 18:43 ` [PATCH v3 6/9] input: keyboard: mtk-pmic-keys: add MT6392 support Luca Leonardo Scorcia
2026-03-18 12:39 ` AngeloGioacchino Del Regno
2026-03-17 18:43 ` [PATCH v3 7/9] regulator: mt6392: Add support for MT6392 regulator Luca Leonardo Scorcia
2026-03-18 12:39 ` AngeloGioacchino Del Regno
2026-03-19 5:04 ` Chen-Yu Tsai
2026-03-17 18:43 ` [PATCH v3 8/9] pinctrl: mediatek: mt6397: Add support for MT6392 variant Luca Leonardo Scorcia
2026-03-18 12:38 ` AngeloGioacchino Del Regno
2026-03-17 18:43 ` [PATCH v3 9/9] arm64: dts: mt6392: add mt6392 PMIC dtsi Luca Leonardo Scorcia
2026-03-18 12:39 ` AngeloGioacchino Del Regno
2026-03-18 13:54 ` Chen-Yu Tsai
2026-03-18 17:22 ` AngeloGioacchino Del Regno
2026-03-26 5:43 ` Chen-Yu Tsai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260317184507.523060-4-l.scorcia@gmail.com \
--to=l.scorcia@gmail.com \
--cc=angelogioacchino.delregno@collabora.com \
--cc=bisson.gary@gmail.com \
--cc=broonie@kernel.org \
--cc=chen.zhong@mediatek.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.torokhov@gmail.com \
--cc=julien.massot@collabora.com \
--cc=krzk+dt@kernel.org \
--cc=lee@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linusw@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-pm@vger.kernel.org \
--cc=louisalexis.eyraud@collabora.com \
--cc=macpaul.lin@mediatek.com \
--cc=matthias.bgg@gmail.com \
--cc=parent.f@gmail.com \
--cc=robh@kernel.org \
--cc=sean.wang@mediatek.com \
--cc=sen.chu@mediatek.com \
--cc=val@packett.cool \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox