From: kernel test robot <lkp@intel.com>
To: aspeedyh <yh_chung@aspeedtech.com>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk@kernel.org>,
Conor Dooley <conor+dt@kernel.org>, Joel Stanley <joel@jms.id.au>,
Andrew Jeffery <andrew@codeconstruct.com.au>,
Ryan Chen <ryan_chen@aspeedtech.com>,
Philipp Zabel <p.zabel@pengutronix.de>
Cc: oe-kbuild-all@lists.linux.dev, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-aspeed@lists.ozlabs.org, linux-kernel@vger.kernel.org,
openbmc@lists.ozlabs.org, maciej.lawniczak@intel.com,
aspeedyh <yh_chung@aspeedtech.com>
Subject: Re: [PATCH 5/7] soc: aspeed: Add eSPI flash channel support
Date: Fri, 20 Mar 2026 09:17:14 +0800 [thread overview]
Message-ID: <202603200904.M00MLkjz-lkp@intel.com> (raw)
In-Reply-To: <20260313-upstream_espi-v1-5-9504428e1f43@aspeedtech.com>
Hi aspeedyh,
kernel test robot noticed the following build errors:
[auto build test ERROR on 0257f64bdac7fdca30fa3cae0df8b9ecbec7733a]
url: https://github.com/intel-lab-lkp/linux/commits/aspeedyh/dt-bindings-soc-aspeed-Add-AST2600-eSPI-controller/20260315-101647
base: 0257f64bdac7fdca30fa3cae0df8b9ecbec7733a
patch link: https://lore.kernel.org/r/20260313-upstream_espi-v1-5-9504428e1f43%40aspeedtech.com
patch subject: [PATCH 5/7] soc: aspeed: Add eSPI flash channel support
config: m68k-allyesconfig (https://download.01.org/0day-ci/archive/20260320/202603200904.M00MLkjz-lkp@intel.com/config)
compiler: m68k-linux-gcc (GCC) 15.2.0
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20260320/202603200904.M00MLkjz-lkp@intel.com/reproduce)
If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202603200904.M00MLkjz-lkp@intel.com/
All errors (new ones prefixed by >>):
drivers/soc/aspeed/espi/ast2600-espi.c: In function 'ast2600_espi_flash_reset':
>> drivers/soc/aspeed/espi/ast2600-espi.c:137:16: error: implicit declaration of function 'FIELD_PREP' [-Wimplicit-function-declaration]
137 | reg |= FIELD_PREP(ESPI_CTRL_FLASH_TAFS_MODE, flash->tafs.mode);
| ^~~~~~~~~~
drivers/soc/aspeed/espi/ast2600-espi.c: In function 'ast2600_espi_flash_remove':
drivers/soc/aspeed/espi/ast2600-espi.c:172:35: warning: variable 'flash' set but not used [-Wunused-but-set-variable]
172 | struct aspeed_espi_flash *flash;
| ^~~~~
drivers/soc/aspeed/espi/ast2600-espi.c: In function 'ast2600_espi_flash_get_hdr':
>> drivers/soc/aspeed/espi/ast2600-espi.c:194:20: error: implicit declaration of function 'FIELD_GET' [-Wimplicit-function-declaration]
194 | hdr->cyc = FIELD_GET(ESPI_FLASH_RX_CTRL_CYC, reg);
| ^~~~~~~~~
vim +/FIELD_PREP +137 drivers/soc/aspeed/espi/ast2600-espi.c
111
112 static void ast2600_espi_flash_reset(struct aspeed_espi *espi)
113 {
114 struct aspeed_espi_flash *flash;
115 u32 reg;
116
117 flash = &espi->flash;
118
119 writel(ESPI_INT_EN_FLASH, espi->regs + ESPI_INT_EN_CLR);
120 writel(ESPI_INT_STS_FLASH, espi->regs + ESPI_INT_STS);
121
122 reg = readl(espi->regs + ESPI_CTRL);
123 reg &= ~(ESPI_CTRL_FLASH_TX_SW_RST
124 | ESPI_CTRL_FLASH_RX_SW_RST
125 | ESPI_CTRL_FLASH_TX_DMA_EN
126 | ESPI_CTRL_FLASH_RX_DMA_EN
127 | ESPI_CTRL_FLASH_SW_RDY);
128 writel(reg, espi->regs + ESPI_CTRL);
129
130 udelay(1);
131
132 reg |= (ESPI_CTRL_FLASH_TX_SW_RST | ESPI_CTRL_FLASH_RX_SW_RST);
133 writel(reg, espi->regs + ESPI_CTRL);
134
135 flash->tafs.mode = TAFS_MODE_SW;
136 reg = readl(espi->regs + ESPI_CTRL) & ~ESPI_CTRL_FLASH_TAFS_MODE;
> 137 reg |= FIELD_PREP(ESPI_CTRL_FLASH_TAFS_MODE, flash->tafs.mode);
138 writel(reg, espi->regs + ESPI_CTRL);
139
140 if (flash->dma.enable) {
141 writel(flash->dma.tx_addr, espi->regs + ESPI_FLASH_TX_DMA);
142 writel(flash->dma.rx_addr, espi->regs + ESPI_FLASH_RX_DMA);
143
144 reg = readl(espi->regs + ESPI_CTRL)
145 | ESPI_CTRL_FLASH_TX_DMA_EN
146 | ESPI_CTRL_FLASH_RX_DMA_EN;
147 writel(reg, espi->regs + ESPI_CTRL);
148 }
149
150 writel(ESPI_INT_EN_FLASH_RX_CMPLT, espi->regs + ESPI_INT_EN);
151
152 reg = readl(espi->regs + ESPI_CTRL) | ESPI_CTRL_FLASH_SW_RDY;
153 writel(reg, espi->regs + ESPI_CTRL);
154 }
155
156 int ast2600_espi_flash_probe(struct aspeed_espi *espi)
157 {
158 u32 regs;
159
160 regs = readl(espi->regs + ESPI_STS);
161 if (regs & (ESPI_STS_FLASH_TX_BUSY | ESPI_STS_FLASH_RX_BUSY)) {
162 dev_warn(espi->dev, "eSPI flash channel is busy, deferring...\n");
163 return -EPROBE_DEFER;
164 }
165
166 ast2600_espi_flash_reset(espi);
167 return 0;
168 }
169
170 int ast2600_espi_flash_remove(struct aspeed_espi *espi)
171 {
172 struct aspeed_espi_flash *flash;
173 u32 reg;
174
175 flash = &espi->flash;
176
177 writel(ESPI_INT_EN_FLASH, espi->regs + ESPI_INT_EN_CLR);
178
179 reg = readl(espi->regs + ESPI_CTRL);
180 reg &= ~(ESPI_CTRL_FLASH_TX_DMA_EN
181 | ESPI_CTRL_FLASH_RX_DMA_EN
182 | ESPI_CTRL_FLASH_SW_RDY);
183 writel(reg, espi->regs + ESPI_CTRL);
184
185 return 0;
186 }
187
188 int ast2600_espi_flash_get_hdr(struct aspeed_espi *espi,
189 struct espi_comm_hdr *hdr)
190 {
191 u32 reg, len;
192
193 reg = readl(espi->regs + ESPI_FLASH_RX_CTRL);
> 194 hdr->cyc = FIELD_GET(ESPI_FLASH_RX_CTRL_CYC, reg);
195 hdr->tag = FIELD_GET(ESPI_FLASH_RX_CTRL_TAG, reg);
196 len = FIELD_GET(ESPI_FLASH_RX_CTRL_LEN, reg);
197 hdr->len_h = (len >> 8) & 0xff;
198 hdr->len_l = len & 0xff;
199
200 return 0;
201 }
202
--
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki
next prev parent reply other threads:[~2026-03-20 1:21 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-13 10:07 [PATCH 0/7] soc: aspeed: Add AST2600 eSPI controller support aspeedyh
2026-03-13 10:07 ` [PATCH 1/7] dt-bindings: soc: aspeed: Add AST2600 eSPI controller aspeedyh
2026-03-16 7:07 ` Krzysztof Kozlowski
2026-03-16 8:17 ` YH Chung
2026-03-16 11:04 ` Conor Dooley
2026-03-17 8:43 ` YH Chung
2026-03-13 10:07 ` [PATCH 2/7] soc: aspeed: Introduce core eSPI controller support aspeedyh
2026-03-16 9:57 ` Philipp Zabel
2026-03-17 8:40 ` YH Chung
2026-03-13 10:07 ` [PATCH 3/7] soc: aspeed: Add AST2600 peripheral channel port I/O support aspeedyh
2026-03-13 10:07 ` [PATCH 4/7] soc: aspeed: Add eSPI TAFS backend support aspeedyh
2026-03-13 10:07 ` [PATCH 5/7] soc: aspeed: Add eSPI flash channel support aspeedyh
2026-03-19 23:53 ` kernel test robot
2026-03-20 1:17 ` kernel test robot [this message]
2026-03-20 4:19 ` kernel test robot
2026-03-13 10:07 ` [PATCH 6/7] soc: aspeed: Add sysfs controls for flash backend selection aspeedyh
2026-03-13 10:07 ` [PATCH 7/7] arm: dts: aspeed: Add eSPI node for AST2600 aspeedyh
2026-03-13 16:24 ` [PATCH 0/7] soc: aspeed: Add AST2600 eSPI controller support Conor Dooley
2026-03-13 16:32 ` Mark Brown
2026-03-13 16:48 ` Mark Brown
2026-03-16 3:07 ` YH Chung
2026-03-13 21:36 ` Arnd Bergmann
2026-03-14 1:02 ` Mark Brown
2026-03-16 6:06 ` Ivan Mikhaylov
2026-03-16 6:34 ` Andrew Jeffery
2026-03-17 8:14 ` YH Chung
2026-03-17 9:50 ` Arnd Bergmann
2026-03-25 8:41 ` YH Chung
2026-03-25 10:30 ` Arnd Bergmann
2026-03-27 4:14 ` YH Chung
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=202603200904.M00MLkjz-lkp@intel.com \
--to=lkp@intel.com \
--cc=andrew@codeconstruct.com.au \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=joel@jms.id.au \
--cc=krzk@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-aspeed@lists.ozlabs.org \
--cc=linux-kernel@vger.kernel.org \
--cc=maciej.lawniczak@intel.com \
--cc=oe-kbuild-all@lists.linux.dev \
--cc=openbmc@lists.ozlabs.org \
--cc=p.zabel@pengutronix.de \
--cc=robh@kernel.org \
--cc=ryan_chen@aspeedtech.com \
--cc=yh_chung@aspeedtech.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox