From: Thierry Reding <thierry.reding@kernel.org>
To: "Thierry Reding" <thierry.reding@kernel.org>,
"Bjorn Helgaas" <bhelgaas@google.com>,
"Lorenzo Pieralisi" <lpieralisi@kernel.org>,
"Krzysztof Wilczyński" <kwilczynski@kernel.org>,
"Manivannan Sadhasivam" <mani@kernel.org>,
"Rob Herring" <robh@kernel.org>,
"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
"Conor Dooley" <conor+dt@kernel.org>
Cc: Jon Hunter <jonathanh@nvidia.com>,
Mikko Perttunen <mperttunen@nvidia.com>,
linux-pci@vger.kernel.org, devicetree@vger.kernel.org,
linux-tegra@vger.kernel.org
Subject: [PATCH v2 1/5] soc/tegra: Update BPMP ABI header
Date: Fri, 20 Mar 2026 23:54:33 +0100 [thread overview]
Message-ID: <20260320225443.2571920-2-thierry.reding@kernel.org> (raw)
In-Reply-To: <20260320225443.2571920-1-thierry.reding@kernel.org>
From: Thierry Reding <treding@nvidia.com>
This update primarily adds various new commands and MRQs for Tegra264,
but also contains a few new annotations and fixes.
Signed-off-by: Thierry Reding <treding@nvidia.com>
---
Changes in v2:
- remove SPDX-FileCopyrightText tag
include/soc/tegra/bpmp-abi.h | 4565 +++++++++++++++++++++++++++-------
1 file changed, 3671 insertions(+), 894 deletions(-)
diff --git a/include/soc/tegra/bpmp-abi.h b/include/soc/tegra/bpmp-abi.h
index 39bb3f87e28d..5c64b3e02211 100644
--- a/include/soc/tegra/bpmp-abi.h
+++ b/include/soc/tegra/bpmp-abi.h
@@ -1,6 +1,6 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
+/* SPDX-License-Identifier: GPL-2.0 OR MIT */
/*
- * Copyright (c) 2014-2022, NVIDIA CORPORATION. All rights reserved.
+ * Copyright (c) 2014-2025, NVIDIA CORPORATION. All rights reserved.
*/
#ifndef ABI_BPMP_ABI_H
@@ -74,6 +74,7 @@
/**
* @ingroup MRQ_Format
+ *
* Request an answer from the peer.
* This should be set in mrq_request::flags for all requests targetted
* at BPMP. For requests originating in BPMP, this flag is optional except
@@ -85,6 +86,7 @@
/**
* @ingroup MRQ_Format
+ *
* Ring the sender's doorbell when responding. This should be set unless
* the sender wants to poll the underlying communications layer directly.
*
@@ -94,7 +96,9 @@
/**
* @ingroup MRQ_Format
- * CRC present
+ *
+ * This is set in mrq_request::flags for requests that have CRC present and
+ * correspondingly in mrq_response::flags for responses that have CRC present.
*/
#define BPMP_MAIL_CRC_PRESENT (1U << 2U)
@@ -127,91 +131,319 @@ struct mrq_request {
* crc16, xid and length fields are present when set.
* Some platform configurations, especially when targeted to applications requiring
* functional safety, mandate this option being set or otherwise will respond with
- * -BPMP_EBADMSG and ignore the request.
+ * -#BPMP_EBADMSG and ignore the request.
*
* **xid** is a transaction ID.
*
* Only used when #BPMP_MAIL_CRC_PRESENT is set.
*
* **payload_length** of the message expressed in bytes without the size of this header.
- * See table below for minimum accepted payload lengths for each MRQ.
- * Note: For DMCE communication, this field expresses the length as a multiple of 4 bytes
- * rather than bytes.
+ * See tables below for minimum accepted payload lengths for each MRQ.
*
* Only used when #BPMP_MAIL_CRC_PRESENT is set.
*
- * | MRQ | CMD | minimum payload length
- * | -------------------- | ------------------------------------ | ------------------------------------------ |
- * | MRQ_PING | | 4 |
- * | MRQ_THREADED_PING | | 4 |
- * | MRQ_RESET | any | 8 |
- * | MRQ_I2C | | 12 + cmd_i2c_xfer_request.data_size |
- * | MRQ_CLK | CMD_CLK_GET_RATE | 4 |
- * | MRQ_CLK | CMD_CLK_SET_RATE | 16 |
- * | MRQ_CLK | CMD_CLK_ROUND_RATE | 16 |
- * | MRQ_CLK | CMD_CLK_GET_PARENT | 4 |
- * | MRQ_CLK | CMD_CLK_SET_PARENT | 8 |
- * | MRQ_CLK | CMD_CLK_ENABLE | 4 |
- * | MRQ_CLK | CMD_CLK_DISABLE | 4 |
- * | MRQ_CLK | CMD_CLK_IS_ENABLED | 4 |
- * | MRQ_CLK | CMD_CLK_GET_ALL_INFO | 4 |
- * | MRQ_CLK | CMD_CLK_GET_MAX_CLK_ID | 4 |
- * | MRQ_CLK | CMD_CLK_GET_FMAX_AT_VMIN | 4 |
- * | MRQ_QUERY_ABI | | 4 |
- * | MRQ_PG | CMD_PG_QUERY_ABI | 12 |
- * | MRQ_PG | CMD_PG_SET_STATE | 12 |
- * | MRQ_PG | CMD_PG_GET_STATE | 8 |
- * | MRQ_PG | CMD_PG_GET_NAME | 8 |
- * | MRQ_PG | CMD_PG_GET_MAX_ID | 8 |
- * | MRQ_THERMAL | CMD_THERMAL_QUERY_ABI | 8 |
- * | MRQ_THERMAL | CMD_THERMAL_GET_TEMP | 8 |
- * | MRQ_THERMAL | CMD_THERMAL_SET_TRIP | 20 |
- * | MRQ_THERMAL | CMD_THERMAL_GET_NUM_ZONES | 4 |
- * | MRQ_THERMAL | CMD_THERMAL_GET_THERMTRIP | 8 |
- * | MRQ_CPU_VHINT | | 8 |
- * | MRQ_ABI_RATCHET | | 2 |
- * | MRQ_EMC_DVFS_LATENCY | | 8 |
- * | MRQ_EMC_DVFS_EMCHUB | | 8 |
- * | MRQ_EMC_DISP_RFL | | 4 |
- * | MRQ_BWMGR | CMD_BWMGR_QUERY_ABI | 8 |
- * | MRQ_BWMGR | CMD_BWMGR_CALC_RATE | 8 + 8 * bwmgr_rate_req.num_iso_clients |
- * | MRQ_ISO_CLIENT | CMD_ISO_CLIENT_QUERY_ABI | 8 |
- * | MRQ_ISO_CLIENT | CMD_ISO_CLIENT_CALCULATE_LA | 16 |
- * | MRQ_ISO_CLIENT | CMD_ISO_CLIENT_SET_LA | 16 |
- * | MRQ_ISO_CLIENT | CMD_ISO_CLIENT_GET_MAX_BW | 8 |
- * | MRQ_CPU_NDIV_LIMITS | | 4 |
- * | MRQ_CPU_AUTO_CC3 | | 4 |
- * | MRQ_RINGBUF_CONSOLE | CMD_RINGBUF_CONSOLE_QUERY_ABI | 8 |
- * | MRQ_RINGBUF_CONSOLE | CMD_RINGBUF_CONSOLE_READ | 5 |
- * | MRQ_RINGBUF_CONSOLE | CMD_RINGBUF_CONSOLE_WRITE | 5 + cmd_ringbuf_console_write_req.len |
- * | MRQ_RINGBUF_CONSOLE | CMD_RINGBUF_CONSOLE_GET_FIFO | 4 |
- * | MRQ_STRAP | STRAP_SET | 12 |
- * | MRQ_UPHY | CMD_UPHY_PCIE_LANE_MARGIN_CONTROL | 24 |
- * | MRQ_UPHY | CMD_UPHY_PCIE_LANE_MARGIN_STATUS | 4 |
- * | MRQ_UPHY | CMD_UPHY_PCIE_EP_CONTROLLER_PLL_INIT | 5 |
- * | MRQ_UPHY | CMD_UPHY_PCIE_CONTROLLER_STATE | 6 |
- * | MRQ_UPHY | CMD_UPHY_PCIE_EP_CONTROLLER_PLL_OFF | 5 |
- * | MRQ_FMON | CMD_FMON_GEAR_CLAMP | 16 |
- * | MRQ_FMON | CMD_FMON_GEAR_FREE | 4 |
- * | MRQ_FMON | CMD_FMON_GEAR_GET | 4 |
- * | MRQ_FMON | CMD_FMON_FAULT_STS_GET | 8 |
- * | MRQ_EC | CMD_EC_STATUS_EX_GET | 12 |
- * | MRQ_QUERY_FW_TAG | | 0 |
- * | MRQ_DEBUG | CMD_DEBUG_OPEN_RO | 4 + length of cmd_debug_fopen_request.name |
- * | MRQ_DEBUG | CMD_DEBUG_OPEN_WO | 4 + length of cmd_debug_fopen_request.name |
- * | MRQ_DEBUG | CMD_DEBUG_READ | 8 |
- * | MRQ_DEBUG | CMD_DEBUG_WRITE | 12 + cmd_debug_fwrite_request.datalen |
- * | MRQ_DEBUG | CMD_DEBUG_CLOSE | 8 |
- * | MRQ_TELEMETRY | | 8 |
- * | MRQ_PWR_LIMIT | CMD_PWR_LIMIT_QUERY_ABI | 8 |
- * | MRQ_PWR_LIMIT | CMD_PWR_LIMIT_SET | 20 |
- * | MRQ_PWR_LIMIT | CMD_PWR_LIMIT_GET | 16 |
- * | MRQ_PWR_LIMIT | CMD_PWR_LIMIT_CURR_CAP | 8 |
- * | MRQ_GEARS | | 0 |
- * | MRQ_BWMGR_INT | CMD_BWMGR_INT_QUERY_ABI | 8 |
- * | MRQ_BWMGR_INT | CMD_BWMGR_INT_CALC_AND_SET | 16 |
- * | MRQ_BWMGR_INT | CMD_BWMGR_INT_CAP_SET | 8 |
- * | MRQ_OC_STATUS | | 0 |
+ * | MRQ | Sub-command | Minimum payload length
+ * | --------------------- | ------------------------------------ | ------------------------------------------------------- |
+ * | #MRQ_PING | - | 4 |
+ * | #MRQ_THREADED_PING | - | 4 |
+ * | #MRQ_RESET | any | 8 |
+ * | #MRQ_I2C | - | 12 + cmd_i2c_xfer_request.data_size |
+ * | #MRQ_CLK | #CMD_CLK_GET_RATE | 4 |
+ * | #MRQ_CLK | #CMD_CLK_SET_RATE | 16 |
+ * | #MRQ_CLK | #CMD_CLK_ROUND_RATE | 16 |
+ * | #MRQ_CLK | #CMD_CLK_GET_PARENT | 4 |
+ * | #MRQ_CLK | #CMD_CLK_SET_PARENT | 8 |
+ * | #MRQ_CLK | #CMD_CLK_ENABLE | 4 |
+ * | #MRQ_CLK | #CMD_CLK_DISABLE | 4 |
+ * | #MRQ_CLK | #CMD_CLK_IS_ENABLED | 4 |
+ * | #MRQ_CLK | #CMD_CLK_GET_ALL_INFO | 4 |
+ * | #MRQ_CLK | #CMD_CLK_GET_MAX_CLK_ID | 4 |
+ * | #MRQ_CLK | #CMD_CLK_GET_FMAX_AT_VMIN | 4 |
+ * | #MRQ_QUERY_ABI | - | 4 |
+ * | #MRQ_PG | #CMD_PG_QUERY_ABI | 12 |
+ * | #MRQ_PG | #CMD_PG_SET_STATE | 12 |
+ * | #MRQ_PG | #CMD_PG_GET_STATE | 8 |
+ * | #MRQ_PG | #CMD_PG_GET_NAME | 8 |
+ * | #MRQ_PG | #CMD_PG_GET_MAX_ID | 8 |
+ * | #MRQ_THERMAL | #CMD_THERMAL_QUERY_ABI | 8 |
+ * | #MRQ_THERMAL | #CMD_THERMAL_GET_TEMP | 8 |
+ * | #MRQ_THERMAL | #CMD_THERMAL_GET_NUM_ZONES | 4 |
+ * | #MRQ_THERMAL | #CMD_THERMAL_GET_THERMTRIP | 8 |
+ * | #MRQ_ABI_RATCHET | - | 2 |
+ * | #MRQ_EMC_DVFS_LATENCY | - | 8 |
+ * | #MRQ_QUERY_FW_TAG | - | 0 |
+ * | #MRQ_DEBUG | #CMD_DEBUG_OPEN_RO | 4 + length of cmd_debug_fopen_request.name |
+ * | #MRQ_DEBUG | #CMD_DEBUG_OPEN_WO | 4 + length of cmd_debug_fopen_request.name |
+ * | #MRQ_DEBUG | #CMD_DEBUG_READ | 8 |
+ * | #MRQ_DEBUG | #CMD_DEBUG_WRITE | 12 + cmd_debug_fwrite_request.datalen |
+ * | #MRQ_DEBUG | #CMD_DEBUG_CLOSE | 8 |
+ *
+ * @cond (bpmp_t186)
+ * The following additional MRQ is supported on T186 -platform:
+ *
+ * | MRQ | Sub-command | Minimum payload length |
+ * | --------------------- | ------------------------------------- | ------------------------------------- |
+ * | #MRQ_CPU_VHINT | - | 8 |
+ * | #MRQ_THERMAL | #CMD_THERMAL_SET_TRIP | 20 |
+ * | #MRQ_RINGBUF_CONSOLE | #CMD_RINGBUF_CONSOLE_QUERY_ABI | 8 |
+ * | #MRQ_RINGBUF_CONSOLE | #CMD_RINGBUF_CONSOLE_READ | 5 |
+ * | #MRQ_RINGBUF_CONSOLE | #CMD_RINGBUF_CONSOLE_WRITE | 5 + cmd_ringbuf_console_write_req.len |
+ * | #MRQ_RINGBUF_CONSOLE | #CMD_RINGBUF_CONSOLE_GET_FIFO | 4 |
+ * @endcond
+ *
+ * @cond (bpmp_t194)
+ * The following additional MRQs are supported on T194 -platform:
+ *
+ * | MRQ | Sub-command | Minimum payload length |
+ * | --------------------- | ------------------------------------- | ------------------------------------- |
+ * | #MRQ_CPU_NDIV_LIMITS | - | 4 |
+ * | #MRQ_STRAP | #STRAP_SET | 12 |
+ * | #MRQ_CPU_AUTO_CC3 | - | 4 |
+ * | #MRQ_EC | #CMD_EC_STATUS_EX_GET | 12 |
+ * | #MRQ_FMON | #CMD_FMON_GEAR_CLAMP | 16 |
+ * | #MRQ_FMON | #CMD_FMON_GEAR_FREE | 4 |
+ * | #MRQ_FMON | #CMD_FMON_GEAR_GET | 4 |
+ * | #MRQ_FMON | #CMD_FMON_FAULT_STS_GET | 8 |
+ * | #MRQ_THERMAL | #CMD_THERMAL_SET_TRIP | 20 |
+ * | #MRQ_RINGBUF_CONSOLE | #CMD_RINGBUF_CONSOLE_QUERY_ABI | 8 |
+ * | #MRQ_RINGBUF_CONSOLE | #CMD_RINGBUF_CONSOLE_READ | 5 |
+ * | #MRQ_RINGBUF_CONSOLE | #CMD_RINGBUF_CONSOLE_WRITE | 5 + cmd_ringbuf_console_write_req.len |
+ * | #MRQ_RINGBUF_CONSOLE | #CMD_RINGBUF_CONSOLE_GET_FIFO | 4 |
+ * | #MRQ_UPHY | #CMD_UPHY_PCIE_LANE_MARGIN_CONTROL | 24 |
+ * | #MRQ_UPHY | #CMD_UPHY_PCIE_LANE_MARGIN_STATUS | 4 |
+ * | #MRQ_UPHY | #CMD_UPHY_PCIE_EP_CONTROLLER_PLL_INIT | 5 |
+ * | #MRQ_UPHY | #CMD_UPHY_PCIE_CONTROLLER_STATE | 6 |
+ * | #MRQ_UPHY | #CMD_UPHY_PCIE_EP_CONTROLLER_PLL_OFF | 5 |
+ * @endcond
+ *
+ * @cond (bpmp_safe && bpmp_t234)
+ * The following additional MRQ is supported on functional-safety
+ * builds for the T234 platform:
+ *
+ * | MRQ | Sub-command | Minimum payload length |
+ * | --------------------- | ------------------------------------- | ------------------------------------- |
+ * | #MRQ_CPU_NDIV_LIMITS | - | 4 |
+ * | #MRQ_RINGBUF_CONSOLE | #CMD_RINGBUF_CONSOLE_QUERY_ABI | 8 |
+ * | #MRQ_RINGBUF_CONSOLE | #CMD_RINGBUF_CONSOLE_READ | 5 |
+ * | #MRQ_RINGBUF_CONSOLE | #CMD_RINGBUF_CONSOLE_WRITE | 5 + cmd_ringbuf_console_write_req.len |
+ * | #MRQ_RINGBUF_CONSOLE | #CMD_RINGBUF_CONSOLE_GET_FIFO | 4 |
+ * | #MRQ_UPHY | #CMD_UPHY_PCIE_LANE_MARGIN_CONTROL | 24 |
+ * | #MRQ_UPHY | #CMD_UPHY_PCIE_LANE_MARGIN_STATUS | 4 |
+ * | #MRQ_UPHY | #CMD_UPHY_PCIE_EP_CONTROLLER_PLL_INIT | 5 |
+ * | #MRQ_UPHY | #CMD_UPHY_PCIE_CONTROLLER_STATE | 6 |
+ * | #MRQ_UPHY | #CMD_UPHY_PCIE_EP_CONTROLLER_PLL_OFF | 5 |
+ * | #MRQ_FMON | #CMD_FMON_GEAR_CLAMP | 16 |
+ * | #MRQ_FMON | #CMD_FMON_GEAR_FREE | 4 |
+ * | #MRQ_FMON | #CMD_FMON_GEAR_GET | 4 |
+ * | #MRQ_FMON | #CMD_FMON_FAULT_STS_GET | 8 |
+ * | #MRQ_EMC_DVFS_EMCHUB | - | 8 |
+ * | #MRQ_EMC_DISP_RFL | - | 4 |
+ *
+ * @endcond
+ *
+ * @cond (!bpmp_safe && bpmp_t234)
+ *
+ * The following additional MRQs are supported on non-functional-safety
+ * builds for the T234 and T238 -platforms:
+ *
+ * | MRQ | Sub-command | Minimum payload length |
+ * | --------------------- | ------------------------------------- | --------------------------------------------------- |
+ * | #MRQ_CPU_NDIV_LIMITS | - | 4 |
+ * | #MRQ_STRAP | #STRAP_SET | 12 |
+ * | #MRQ_THERMAL | #CMD_THERMAL_SET_TRIP | 20 |
+ * | #MRQ_RINGBUF_CONSOLE | #CMD_RINGBUF_CONSOLE_QUERY_ABI | 8 |
+ * | #MRQ_RINGBUF_CONSOLE | #CMD_RINGBUF_CONSOLE_READ | 5 |
+ * | #MRQ_RINGBUF_CONSOLE | #CMD_RINGBUF_CONSOLE_WRITE | 5 + cmd_ringbuf_console_write_req.len |
+ * | #MRQ_RINGBUF_CONSOLE | #CMD_RINGBUF_CONSOLE_GET_FIFO | 4 |
+ * | #MRQ_UPHY | #CMD_UPHY_PCIE_LANE_MARGIN_CONTROL | 24 |
+ * | #MRQ_UPHY | #CMD_UPHY_PCIE_LANE_MARGIN_STATUS | 4 |
+ * | #MRQ_UPHY | #CMD_UPHY_PCIE_EP_CONTROLLER_PLL_INIT | 5 |
+ * | #MRQ_UPHY | #CMD_UPHY_PCIE_CONTROLLER_STATE | 6 |
+ * | #MRQ_UPHY | #CMD_UPHY_PCIE_EP_CONTROLLER_PLL_OFF | 5 |
+ * | #MRQ_FMON | #CMD_FMON_GEAR_CLAMP | 16 |
+ * | #MRQ_FMON | #CMD_FMON_GEAR_FREE | 4 |
+ * | #MRQ_FMON | #CMD_FMON_GEAR_GET | 4 |
+ * | #MRQ_FMON | #CMD_FMON_FAULT_STS_GET | 8 |
+ * | #MRQ_EMC_DVFS_EMCHUB | - | 8 |
+ * | #MRQ_EMC_DISP_RFL | - | 4 |
+ * | #MRQ_BWMGR | #CMD_BWMGR_QUERY_ABI | 8 |
+ * | #MRQ_BWMGR | #CMD_BWMGR_CALC_RATE | 8 + 8 * cmd_bwmgr_calc_rate_request.num_iso_clients |
+ * | #MRQ_ISO_CLIENT | #CMD_ISO_CLIENT_QUERY_ABI | 8 |
+ * | #MRQ_ISO_CLIENT | #CMD_ISO_CLIENT_CALCULATE_LA | 16 |
+ * | #MRQ_ISO_CLIENT | #CMD_ISO_CLIENT_SET_LA | 16 |
+ * | #MRQ_ISO_CLIENT | #CMD_ISO_CLIENT_GET_MAX_BW | 8 |
+ * | #MRQ_BWMGR_INT | #CMD_BWMGR_INT_QUERY_ABI | 8 |
+ * | #MRQ_BWMGR_INT | #CMD_BWMGR_INT_CALC_AND_SET | 16 |
+ * | #MRQ_BWMGR_INT | #CMD_BWMGR_INT_CAP_SET | 8 |
+ * | #MRQ_BWMGR_INT | #CMD_BWMGR_INT_GET_LAST_REQUEST | 9 |
+ * | #MRQ_OC_STATUS | - | 0 |
+ * @endcond
+ *
+ * @cond bpmp_t238
+ * The following additional MRQs are supported on T238 platform:
+ *
+ * | MRQ | Sub-command | Minimum payload length |
+ * | --------------------- | ------------------------------------- | --------------------------------------------------- |
+ * | #MRQ_CPU_NDIV_LIMITS | - | 4 |
+ * | #MRQ_STRAP | #STRAP_SET | 12 |
+ * | #MRQ_THERMAL | #CMD_THERMAL_SET_TRIP | 20 |
+ * | #MRQ_RINGBUF_CONSOLE | #CMD_RINGBUF_CONSOLE_QUERY_ABI | 8 |
+ * | #MRQ_RINGBUF_CONSOLE | #CMD_RINGBUF_CONSOLE_READ | 5 |
+ * | #MRQ_RINGBUF_CONSOLE | #CMD_RINGBUF_CONSOLE_WRITE | 5 + cmd_ringbuf_console_write_req.len |
+ * | #MRQ_RINGBUF_CONSOLE | #CMD_RINGBUF_CONSOLE_GET_FIFO | 4 |
+ * | #MRQ_UPHY | #CMD_UPHY_PCIE_LANE_MARGIN_CONTROL | 24 |
+ * | #MRQ_UPHY | #CMD_UPHY_PCIE_LANE_MARGIN_STATUS | 4 |
+ * | #MRQ_UPHY | #CMD_UPHY_PCIE_EP_CONTROLLER_PLL_INIT | 5 |
+ * | #MRQ_UPHY | #CMD_UPHY_PCIE_CONTROLLER_STATE | 6 |
+ * | #MRQ_UPHY | #CMD_UPHY_PCIE_EP_CONTROLLER_PLL_OFF | 5 |
+ * | #MRQ_FMON | #CMD_FMON_GEAR_CLAMP | 16 |
+ * | #MRQ_FMON | #CMD_FMON_GEAR_FREE | 4 |
+ * | #MRQ_FMON | #CMD_FMON_GEAR_GET | 4 |
+ * | #MRQ_FMON | #CMD_FMON_FAULT_STS_GET | 8 |
+ * | #MRQ_EMC_DVFS_EMCHUB | - | 8 |
+ * | #MRQ_EMC_DISP_RFL | - | 4 |
+ * | #MRQ_BWMGR | #CMD_BWMGR_QUERY_ABI | 8 |
+ * | #MRQ_BWMGR | #CMD_BWMGR_CALC_RATE | 8 + 8 * cmd_bwmgr_calc_rate_request.num_iso_clients |
+ * | #MRQ_ISO_CLIENT | #CMD_ISO_CLIENT_QUERY_ABI | 8 |
+ * | #MRQ_ISO_CLIENT | #CMD_ISO_CLIENT_CALCULATE_LA | 16 |
+ * | #MRQ_ISO_CLIENT | #CMD_ISO_CLIENT_SET_LA | 16 |
+ * | #MRQ_ISO_CLIENT | #CMD_ISO_CLIENT_GET_MAX_BW | 8 |
+ * | #MRQ_BWMGR_INT | #CMD_BWMGR_INT_QUERY_ABI | 8 |
+ * | #MRQ_BWMGR_INT | #CMD_BWMGR_INT_CALC_AND_SET | 16 |
+ * | #MRQ_BWMGR_INT | #CMD_BWMGR_INT_CAP_SET | 8 |
+ * | #MRQ_BWMGR_INT | #CMD_BWMGR_INT_GET_LAST_REQUEST | 9 |
+ * | #MRQ_OC_STATUS | - | 0 |
+ * | #MRQ_THROTTLE | #CMD_THROTTLE_SET_OC_CONFIG | 5 |
+ * @endcond
+ *
+ * @cond (bpmp_th500)
+ * The following additional MRQs are supported on TH500 -platform:
+ *
+ * | MRQ | Sub-command | Minimum payload length |
+ * | -------------------- | ------------------------------------- | ---------------------- |
+ * | #MRQ_CPU_NDIV_LIMITS | - | 4 |
+ * | #MRQ_THERMAL | #CMD_THERMAL_SET_TRIP | 20 |
+ * | #MRQ_STRAP | #STRAP_SET | 12 |
+ * | #MRQ_SHUTDOWN | - | 4 |
+ * | #MRQ_UPHY | #CMD_UPHY_PCIE_LANE_MARGIN_CONTROL | 24 |
+ * | #MRQ_UPHY | #CMD_UPHY_PCIE_LANE_MARGIN_STATUS | 4 |
+ * | #MRQ_UPHY | #CMD_UPHY_PCIE_EP_CONTROLLER_PLL_INIT | 5 |
+ * | #MRQ_UPHY | #CMD_UPHY_PCIE_CONTROLLER_STATE | 6 |
+ * | #MRQ_UPHY | #CMD_UPHY_PCIE_EP_CONTROLLER_PLL_OFF | 5 |
+ * | #MRQ_UPHY | #CMD_UPHY_PCIE_CONFIG_VDM | 3 |
+ * | #MRQ_TELEMETRY | - | 8 |
+ * | #MRQ_PWR_LIMIT | #CMD_PWR_LIMIT_QUERY_ABI | 8 |
+ * | #MRQ_PWR_LIMIT | #CMD_PWR_LIMIT_SET | 20 |
+ * | #MRQ_PWR_LIMIT | #CMD_PWR_LIMIT_GET | 16 |
+ * | #MRQ_PWR_LIMIT | #CMD_PWR_LIMIT_CURR_CAP | 8 |
+ * | #MRQ_GEARS | - | 0 |
+ * | #MRQ_C2C | #CMD_C2C_QUERY_ABI | 8 |
+ * | #MRQ_C2C | #CMD_C2C_START_INITIALIZATION | 5 |
+ * | #MRQ_C2C | #CMD_C2C_GET_STATUS | 4 |
+ * | #MRQ_C2C | #CMD_C2C_HOTRESET_PREP | 5 |
+ * | #MRQ_C2C | #CMD_C2C_START_HOTRESET | 5 |
+ * | #MRQ_THROTTLE | #CMD_THROTTLE_QUERY_ABI | 4 |
+ * | #MRQ_THROTTLE | #CMD_THROTTLE_GET_CHIPTHROT_STATUS | 4 |
+ * | #MRQ_PWRMODEL | #CMD_PWRMODEL_QUERY_ABI | 8 |
+ * | #MRQ_PWRMODEL | #CMD_PWRMODEL_PWR_GET | 16 |
+ * | #MRQ_PWR_CNTRL | #CMD_PWR_CNTRL_QUERY_ABI | 8 |
+ * | #MRQ_PWR_CNTRL | #CMD_PWR_CNTRL_BYPASS_SET | 12 |
+ * | #MRQ_PWR_CNTRL | #CMD_PWR_CNTRL_BYPASS_GET | 8 |
+ * @endcond
+ *
+ * @cond (bpmp_tb500)
+ * The following additional MRQs are supported on TB500 -platform:
+ *
+ * | MRQ | Sub-command | Minimum payload length |
+ * | -------------------- | ---------------------------------------- | ---------------------- |
+ * | #MRQ_PWR_LIMIT | #CMD_PWR_LIMIT_QUERY_ABI | 8 |
+ * | #MRQ_PWR_LIMIT | #CMD_PWR_LIMIT_SET | 20 |
+ * | #MRQ_PWR_LIMIT | #CMD_PWR_LIMIT_GET | 16 |
+ * | #MRQ_PWR_LIMIT | #CMD_PWR_LIMIT_CURR_CAP | 8 |
+ * | #MRQ_TELEMETRY_EX | #CMD_TELEMETRY_EX_QUERY_ABI | 8 |
+ * | #MRQ_TELEMETRY_EX | #CMD_TELEMETRY_EX_BASE_SZ_GET | 12 |
+ * | #MRQ_THROTTLE | #CMD_THROTTLE_GET_CHIPTHROT_STATUS | 4 |
+ * | #MRQ_C2C | #CMD_C2C_QUERY_ABI | 8 |
+ * | #MRQ_C2C | #CMD_C2C_START_INITIALIZATION | 5 |
+ * | #MRQ_C2C | #CMD_C2C_GET_STATUS | 4 |
+ * | #MRQ_C2C | #CMD_C2C_HOTRESET_PREP | 5 |
+ * | #MRQ_C2C | #CMD_C2C_START_HOTRESET | 5 |
+ * | MRQ_HWPM | CMD_HWPM_QUERY_ABI | 4 |
+ * | MRQ_HWPM | CMD_HWPM_IPMU_SET_TRIGGERS | 120 |
+ * | MRQ_HWPM | CMD_HWPM_IPMU_SET_PAYLOADS_SHIFTS | 120 |
+ * | MRQ_HWPM | CMD_HWPM_IPMU_GET_MAX_PAYLOADS | 0 |
+ * | MRQ_HWPM | CMD_HWPM_NVTHERM_SET_SAMPLE_RATE | 4 |
+ * | MRQ_HWPM | CMD_HWPM_NVTHERM_SET_BUBBLE_INTERVAL | 4 |
+ * | MRQ_HWPM | CMD_HWPM_NVTHERM_SET_FLEX_CHANNELS | 120 |
+ * | MRQ_HWPM | CMD_HWPM_ISENSE_GET_SENSOR_NAME | 4 |
+ * | MRQ_HWPM | CMD_HWPM_ISENSE_GET_SENSOR_CHANNEL | 4 |
+ * | MRQ_HWPM | CMD_HWPM_ISENSE_GET_SENSOR_SCALE_FACTOR | 4 |
+ * | MRQ_HWPM | CMD_HWPM_ISENSE_GET_SENSOR_OFFSET | 4 |
+ * | MRQ_HWPM | CMD_HWPM_ISENSE_GET_SUM_BLOCK_NAME | 4 |
+ * | MRQ_HWPM | CMD_HWPM_ISENSE_GET_SUM_BLOCK_INPUTS | 4 |
+ * | MRQ_DVFS | CMD_DVFS_QUERY_ABI | 4 |
+ * | MRQ_DVFS | CMD_DVFS_SET_CTRL_STATE | 8 |
+ * | MRQ_DVFS | CMD_DVFS_SET_MGR_STATE | 8 |
+ * | MRQ_PPP_PROFILE | CMD_PPP_PROFILE_QUERY_ABI | 8 |
+ * | MRQ_PPP_PROFILE | CMD_PPP_PROFILE_QUERY_MASKS | 8 |
+ * | MRQ_PPP_PROFILE | CMD_PPP_CORE_QUERY_CPU_MASK | 8 |
+ * | MRQ_PPP_PROFILE | CMD_PPP_AVAILABLE_QUERY | 4 |
+ * @endcond
+ *
+ * @cond (bpmp_safe && bpmp_t264)
+ * The following additional MRQ is supported on functional-safety
+ * builds for the T264 platform:
+ *
+ * | MRQ | Sub-command | Minimum payload length |
+ * | -------------------- | --------------------------------- | ---------------------- |
+ * | #MRQ_CPU_NDIV_LIMITS | - | 4 |
+ * | #MRQ_STRAP | #STRAP_SET | 12 |
+ * | #MRQ_SHUTDOWN | - | 4 |
+ * | #MRQ_FMON | #CMD_FMON_GEAR_CLAMP | 16 |
+ * | #MRQ_FMON | #CMD_FMON_GEAR_FREE | 4 |
+ * | #MRQ_FMON | #CMD_FMON_GEAR_GET | 4 |
+ * | #MRQ_FMON | #CMD_FMON_FAULT_STS_GET | 8 |
+ * | #MRQ_PCIE | #CMD_PCIE_EP_CONTROLLER_INIT | 5 |
+ * | #MRQ_PCIE | #CMD_PCIE_EP_CONTROLLER_OFF | 5 |
+ * | #MRQ_CR7 | #CMD_CR7_ENTRY | 12 |
+ * | #MRQ_CR7 | #CMD_CR7_EXIT | 12 |
+ * | #MRQ_SLC | #CMD_SLC_QUERY_ABI | 8 |
+ * | #MRQ_SLC | #CMD_SLC_BYPASS_SET | 8 |
+ * | #MRQ_SLC | #CMD_SLC_BYPASS_GET | 4 |
+ * @endcond
+ *
+ * @cond (!bpmp_safe && bpmp_t264)
+ * The following additional MRQs are supported on non-functional-safety
+ * builds for the T264 -platform:
+ *
+ * | MRQ | Sub-command | Minimum payload length |
+ * | -------------------- | --------------------------------- | ---------------------- |
+ * | #MRQ_CPU_NDIV_LIMITS | - | 4 |
+ * | #MRQ_STRAP | #STRAP_SET | 12 |
+ * | #MRQ_SHUTDOWN | - | 4 |
+ * | #MRQ_FMON | #CMD_FMON_GEAR_CLAMP | 16 |
+ * | #MRQ_FMON | #CMD_FMON_GEAR_FREE | 4 |
+ * | #MRQ_FMON | #CMD_FMON_GEAR_GET | 4 |
+ * | #MRQ_FMON | #CMD_FMON_FAULT_STS_GET | 8 |
+ * | #MRQ_OC_STATUS | - | 0 |
+ * | #MRQ_PCIE | #CMD_PCIE_EP_CONTROLLER_INIT | 5 |
+ * | #MRQ_PCIE | #CMD_PCIE_EP_CONTROLLER_OFF | 5 |
+ * | #MRQ_PCIE | #CMD_PCIE_RP_CONTROLLER_OFF | 5 |
+ * | #MRQ_CR7 | #CMD_CR7_ENTRY | 12 |
+ * | #MRQ_CR7 | #CMD_CR7_EXIT | 12 |
+ * | #MRQ_SLC | #CMD_SLC_QUERY_ABI | 8 |
+ * | #MRQ_SLC | #CMD_SLC_BYPASS_SET | 8 |
+ * | #MRQ_SLC | #CMD_SLC_BYPASS_GET | 4 |
+ * | #MRQ_ISO_CLIENT | #CMD_ISO_CLIENT_QUERY_ABI | 8 |
+ * | #MRQ_ISO_CLIENT | #CMD_ISO_CLIENT_CALCULATE_LA | 16 |
+ * | #MRQ_ISO_CLIENT | #CMD_ISO_CLIENT_SET_LA | 16 |
+ * | #MRQ_ISO_CLIENT | #CMD_ISO_CLIENT_GET_MAX_BW | 8 |
+ * | #MRQ_BWMGR_INT | #CMD_BWMGR_INT_QUERY_ABI | 8 |
+ * | #MRQ_BWMGR_INT | #CMD_BWMGR_INT_CALC_AND_SET | 16 |
+ * | #MRQ_BWMGR_INT | #CMD_BWMGR_INT_CAP_SET | 8 |
+ * | #MRQ_BWMGR_INT | #CMD_BWMGR_INT_CURR_AVAILABLE_BW | 8 |
+ * | #MRQ_BWMGR_INT | #CMD_BWMGR_INT_GET_LAST_REQUEST | 9 |
+ * @endcond
*
* **crc16**
*
@@ -220,7 +452,7 @@ struct mrq_request {
* including this header. However the crc16 field is considered to be set to 0 when
* calculating the CRC. Only used when #BPMP_MAIL_CRC_PRESENT is set. If
* #BPMP_MAIL_CRC_PRESENT is set and this field does not match the CRC as
- * calculated by BPMP, -BPMP_EBADMSG will be returned and the request will
+ * calculated by BPMP, -#BPMP_EBADMSG will be returned and the request will
* be ignored. See code snippet below on how to calculate the CRC.
*
* @code
@@ -322,6 +554,9 @@ struct mrq_response {
#define MRQ_CPU_VHINT 28U
#define MRQ_ABI_RATCHET 29U
#define MRQ_EMC_DVFS_LATENCY 31U
+//adoc: tag::bpmp_dmce_mrq_shutdown[]
+#define MRQ_SHUTDOWN 49U
+//adoc: end::bpmp_dmce_mrq_shutdown[]
#define MRQ_RINGBUF_CONSOLE 65U
#define MRQ_PG 66U
#define MRQ_CPU_NDIV_LIMITS 67U
@@ -341,48 +576,31 @@ struct mrq_response {
#define MRQ_GEARS 82U
#define MRQ_BWMGR_INT 83U
#define MRQ_OC_STATUS 84U
-
-/** @cond DEPRECATED */
-#define MRQ_RESERVED_2 2U
-#define MRQ_RESERVED_3 3U
-#define MRQ_RESERVED_4 4U
-#define MRQ_RESERVED_5 5U
-#define MRQ_RESERVED_6 6U
-#define MRQ_RESERVED_7 7U
-#define MRQ_RESERVED_8 8U
-#define MRQ_RESERVED_10 10U
-#define MRQ_RESERVED_11 11U
-#define MRQ_RESERVED_12 12U
-#define MRQ_RESERVED_13 13U
-#define MRQ_RESERVED_14 14U
-#define MRQ_RESERVED_15 15U
-#define MRQ_RESERVED_16 16U
-#define MRQ_RESERVED_17 17U
-#define MRQ_RESERVED_18 18U
-#define MRQ_RESERVED_24 24U
-#define MRQ_RESERVED_25 25U
-#define MRQ_RESERVED_26 26U
-#define MRQ_RESERVED_30 30U
-#define MRQ_RESERVED_64 64U
-#define MRQ_RESERVED_74 74U
-/** @endcond DEPRECATED */
-
-/** @} */
+#define MRQ_C2C 85U
+#define MRQ_THROTTLE 86U
+#define MRQ_PWRMODEL 87U
+#define MRQ_PCIE 88U
+#define MRQ_PWR_CNTRL 89U
+#define MRQ_CR7 90U
+#define MRQ_SLC 91U
+#define MRQ_TELEMETRY_EX 92U
+#define MRQ_HWPM 93U
+#define MRQ_DVFS 94U
+#define MRQ_PPP_PROFILE 95U
/**
- * @ingroup MRQ_Codes
* @brief Maximum MRQ code to be sent by CPU software to
* BPMP. Subject to change in future
*/
-#define MAX_CPU_MRQ_ID 84U
+#define MAX_CPU_MRQ_ID 95U
+
+/** @} */
/**
* @addtogroup MRQ_Payloads
* @{
* @defgroup Ping Ping
* @defgroup Query_Tag Query Tag
- * @defgroup Module Loadable Modules
- * @defgroup Trace Trace
* @defgroup Debugfs Debug File System
* @defgroup Reset Reset
* @defgroup I2C I2C
@@ -390,6 +608,7 @@ struct mrq_response {
* @defgroup ABI_info ABI Info
* @defgroup Powergating Power Gating
* @defgroup Thermal Thermal
+ * @defgroup Throttle Throttle
* @defgroup OC_status OC status
* @defgroup Vhint CPU Voltage hint
* @defgroup EMC EMC
@@ -405,7 +624,22 @@ struct mrq_response {
* @defgroup Telemetry Telemetry
* @defgroup Pwrlimit PWR_LIMIT
* @defgroup Gears Gears
+ * @defgroup Shutdown Shutdown
* @defgroup BWMGR_INT Bandwidth Manager Integrated
+ * @defgroup C2C C2C
+ * @defgroup Pwrmodel Power Model
+ * @defgroup Pwrcntrl Power Controllers
+ * @cond bpmp_t264
+ * * @defgroup PCIE PCIE
+ * * @defgroup CR7 CR7
+ * * @defgroup Slc Slc
+ * @endcond
+ * @cond bpmp_tb500
+ * * @defgroup Telemetry_ex Telemetry Expanded
+ * * @defgroup HWPM Hardware Performance Monitoring
+ * * @defgroup DVFS Dynamic Voltage and Frequency Scaling
+ * * @defgroup PPP power/performance profiles
+ * @endcond
* @} MRQ_Payloads
*/
@@ -414,7 +648,6 @@ struct mrq_response {
* @def MRQ_PING
* @brief A simple ping
*
- * * Platforms: All
* * Initiators: Any
* * Targets: Any
* * Request Payload: @ref mrq_ping_request
@@ -424,7 +657,6 @@ struct mrq_response {
* @def MRQ_THREADED_PING
* @brief A deeper ping
*
- * * Platforms: All
* * Initiators: Any
* * Targets: BPMP
* * Request Payload: @ref mrq_ping_request
@@ -441,8 +673,8 @@ struct mrq_response {
* @brief Request with #MRQ_PING
*
* Used by the sender of an #MRQ_PING message to request a pong from
- * recipient. The response from the recipient is computed based on
- * #challenge.
+ * recipient. The response from the recipient is computed based on the
+ * mrq_ping_request::challenge -value.
*/
struct mrq_ping_request {
/** @brief Arbitrarily chosen value */
@@ -470,7 +702,7 @@ struct mrq_ping_response {
*
* @deprecated Use #MRQ_QUERY_FW_TAG instead.
*
- * * Platforms: All
+ * @details
* * Initiators: CCPLEX
* * Targets: BPMP
* * Request Payload: @ref mrq_query_tag_request
@@ -483,7 +715,7 @@ struct mrq_ping_response {
* @brief Request with #MRQ_QUERY_TAG
*
* @deprecated This structure will be removed in future version.
- * Use MRQ_QUERY_FW_TAG instead.
+ * Use #MRQ_QUERY_FW_TAG instead.
*/
struct mrq_query_tag_request {
/** @brief Base address to store the firmware tag */
@@ -496,7 +728,6 @@ struct mrq_query_tag_request {
* @def MRQ_QUERY_FW_TAG
* @brief Query BPMP firmware's tag (i.e. unique identifier)
*
- * * Platforms: All
* * Initiators: Any
* * Targets: BPMP
* * Request Payload: N/A
@@ -510,10 +741,9 @@ struct mrq_query_tag_request {
*
* Sent in response to #MRQ_QUERY_FW_TAG message. #tag contains the unique
* identifier for the version of firmware issuing the reply.
- *
*/
struct mrq_query_fw_tag_response {
- /** @brief Array to store tag information */
+ /** @brief Array to store tag information */
uint8_t tag[32];
} BPMP_ABI_PACKED;
@@ -532,9 +762,8 @@ struct mrq_threaded_ping_response {
* @def MRQ_DEBUGFS
* @brief Interact with BPMP's debugfs file nodes
*
- * @deprecated use MRQ_DEBUG instead.
+ * @deprecated Use #MRQ_DEBUG instead.
*
- * * Platforms: T186, T194
* * Initiators: Any
* * Targets: BPMP
* * Request Payload: @ref mrq_debugfs_request
@@ -626,9 +855,9 @@ struct cmd_debugfs_dumpdir_response {
/**
* @ingroup Debugfs
- * @brief Request with #MRQ_DEBUGFS.
+ * @brief Request with #MRQ_DEBUG.
*
- * The sender of an MRQ_DEBUGFS message uses #cmd to specify a debugfs
+ * The sender of an MRQ_DEBUG message uses #cmd to specify a debugfs
* command to execute. Legal commands are the values of @ref
* mrq_debugfs_commands. Each command requires a specific additional
* payload of data.
@@ -676,16 +905,15 @@ struct mrq_debugfs_response {
/**
* @ingroup MRQ_Codes
* @def MRQ_DEBUG
- * @brief Interact with BPMP's debugfs file nodes. Use message payload
+ * @brief Interact with BPMP-FW debugfs file nodes. Use message payload
* for exchanging data. This is functionally equivalent to
- * @ref MRQ_DEBUGFS. But the way in which data is exchanged is different.
- * When software running on CPU tries to read a debugfs file,
+ * the deprecated MRQ_DEBUGFS but the way in which data is exchanged is
+ * different. When software running on CPU tries to read a debugfs file,
* the file path and read data will be stored in message payload.
* Since the message payload size is limited, a debugfs file
* transaction might require multiple frames of data exchanged
* between BPMP and CPU until the transaction completes.
*
- * * Platforms: T194
* * Initiators: Any
* * Targets: BPMP
* * Request Payload: @ref mrq_debug_request
@@ -694,17 +922,34 @@ struct mrq_debugfs_response {
/** @ingroup Debugfs */
enum mrq_debug_commands {
- /** @brief Open required file for read operation */
+ /**
+ * @brief Open file represented by the path in
+ * cmd_debug_fopen_request::name for read operation
+ */
CMD_DEBUG_OPEN_RO = 0,
- /** @brief Open required file for write operation */
+ /**
+ * @brief Open file represented by the path in
+ * cmd_debug_fopen_request::name for write operation
+ */
CMD_DEBUG_OPEN_WO = 1,
- /** @brief Perform read */
+ /**
+ * @brief Perform read on a previously opened file handle represented
+ * by the cmd_debug_fread_request::fd -value.
+ */
CMD_DEBUG_READ = 2,
- /** @brief Perform write */
+ /**
+ * @brief Perform write on a previously opened file handle represented
+ * by the cmd_debug_fwrite_request::fd -value.
+ */
CMD_DEBUG_WRITE = 3,
- /** @brief Close file */
+ /**
+ * @brief Close previously opened file handle.
+ */
CMD_DEBUG_CLOSE = 4,
- /** @brief Not a command */
+ /**
+ * @brief Not a command, represents maximum number of supported
+ * sub-commands
+ */
CMD_DEBUG_MAX
};
@@ -727,35 +972,38 @@ enum mrq_debug_commands {
/**
* @ingroup Debugfs
- * @brief Parameters for CMD_DEBUG_OPEN command
+ * @brief Parameters for #CMD_DEBUG_OPEN_RO and #CMD_DEBUG_OPEN_WO -commands
*/
struct cmd_debug_fopen_request {
- /** @brief File name - Null-terminated string with maximum
- * length @ref DEBUG_FNAME_MAX_SZ
+ /**
+ * @brief File name - Null-terminated string with maximum
+ * length including the terminator defined by the
+ * #DEBUG_FNAME_MAX_SZ -preprocessor constant.
*/
char name[DEBUG_FNAME_MAX_SZ];
} BPMP_ABI_PACKED;
/**
* @ingroup Debugfs
- * @brief Response data for CMD_DEBUG_OPEN_RO/WO command
+ * @brief Response data for #CMD_DEBUG_OPEN_RO and #CMD_DEBUG_OPEN_WO commands
*/
struct cmd_debug_fopen_response {
/** @brief Identifier for file access */
uint32_t fd;
/** @brief Data length. File data size for READ command.
- * Maximum allowed length for WRITE command
+ * Maximum allowed length for WRITE command
*/
uint32_t datalen;
} BPMP_ABI_PACKED;
/**
* @ingroup Debugfs
- * @brief Parameters for CMD_DEBUG_READ command
+ * @brief Parameters for #CMD_DEBUG_READ command
*/
struct cmd_debug_fread_request {
- /** @brief File access identifier received in response
- * to CMD_DEBUG_OPEN_RO request
+ /**
+ * @brief File access identifier received in response
+ * to #CMD_DEBUG_OPEN_RO request
*/
uint32_t fd;
} BPMP_ABI_PACKED;
@@ -770,7 +1018,7 @@ struct cmd_debug_fread_request {
/**
* @ingroup Debugfs
- * @brief Response data for CMD_DEBUG_READ command
+ * @brief Response data for #CMD_DEBUG_READ command
*/
struct cmd_debug_fread_response {
/** @brief Size of data provided in this response in bytes */
@@ -789,11 +1037,11 @@ struct cmd_debug_fread_response {
/**
* @ingroup Debugfs
- * @brief Parameters for CMD_DEBUG_WRITE command
+ * @brief Parameters for #CMD_DEBUG_WRITE command
*/
struct cmd_debug_fwrite_request {
/** @brief File access identifier received in response
- * to CMD_DEBUG_OPEN_RO request
+ * to prior #CMD_DEBUG_OPEN_RO -request
*/
uint32_t fd;
/** @brief Size of write data in bytes */
@@ -804,11 +1052,12 @@ struct cmd_debug_fwrite_request {
/**
* @ingroup Debugfs
- * @brief Parameters for CMD_DEBUG_CLOSE command
+ * @brief Parameters for #CMD_DEBUG_CLOSE command
*/
struct cmd_debug_fclose_request {
- /** @brief File access identifier received in response
- * to CMD_DEBUG_OPEN_RO request
+ /**
+ * @brief File access identifier received in prior response
+ * to #CMD_DEBUG_OPEN_RO or #CMD_DEBUG_OPEN_WO -request.
*/
uint32_t fd;
} BPMP_ABI_PACKED;
@@ -817,30 +1066,34 @@ struct cmd_debug_fclose_request {
* @ingroup Debugfs
* @brief Request with #MRQ_DEBUG.
*
- * The sender of an MRQ_DEBUG message uses #cmd to specify a debugfs
- * command to execute. Legal commands are the values of @ref
- * mrq_debug_commands. Each command requires a specific additional
- * payload of data.
+ * The sender of an #MRQ_DEBUG message uses mrq_debug_request::cmd to specify
+ * which debugfs sub-command to execute. Legal sub-commands are the values
+ * specified in the @ref mrq_debug_commands -enumeration. Each sub-command
+ * requires a specific additional payload of data according to the following
+ * table:
*
- * |command |payload|
- * |-------------------|-------|
- * |CMD_DEBUG_OPEN_RO |fop |
- * |CMD_DEBUG_OPEN_WO |fop |
- * |CMD_DEBUG_READ |frd |
- * |CMD_DEBUG_WRITE |fwr |
- * |CMD_DEBUG_CLOSE |fcl |
+ * |Sub-command |Payload structure |
+ * |--------------------|---------------------------|
+ * |#CMD_DEBUG_OPEN_RO |cmd_debug_fopen_request |
+ * |#CMD_DEBUG_OPEN_WO |cmd_debug_fopen_request |
+ * |#CMD_DEBUG_READ |cmd_debug_fread_request |
+ * |#CMD_DEBUG_WRITE |cmd_debug_fwrite_request |
+ * |#CMD_DEBUG_CLOSE |cmd_debug_fclose_request |
*/
struct mrq_debug_request {
- /** @brief Sub-command (@ref mrq_debug_commands) */
+ /** @brief Sub-command identifier from @ref mrq_debug_commands */
uint32_t cmd;
union {
- /** @brief Request payload for CMD_DEBUG_OPEN_RO/WO command */
+ /**
+ * @brief Request payload for #CMD_DEBUG_OPEN_RO and
+ * #CMD_DEBUG_OPEN_WO sub-commands
+ */
struct cmd_debug_fopen_request fop;
- /** @brief Request payload for CMD_DEBUG_READ command */
+ /** @brief Request payload for #CMD_DEBUG_READ sub-command */
struct cmd_debug_fread_request frd;
- /** @brief Request payload for CMD_DEBUG_WRITE command */
+ /** @brief Request payload for #CMD_DEBUG_WRITE sub-command */
struct cmd_debug_fwrite_request fwr;
- /** @brief Request payload for CMD_DEBUG_CLOSE command */
+ /** @brief Request payload for #CMD_DEBUG_CLOSE sub-command */
struct cmd_debug_fclose_request fcl;
} BPMP_UNION_ANON;
} BPMP_ABI_PACKED;
@@ -850,9 +1103,12 @@ struct mrq_debug_request {
*/
struct mrq_debug_response {
union {
- /** @brief Response data for CMD_DEBUG_OPEN_RO/WO command */
+ /**
+ * @brief Response data for the #CMD_DEBUG_OPEN_RO and
+ * #CMD_DEBUG_OPEN_WO sub-commands
+ */
struct cmd_debug_fopen_response fop;
- /** @brief Response data for CMD_DEBUG_READ command */
+ /** @brief Response data for the #CMD_DEBUG_READ sub-command */
struct cmd_debug_fread_response frd;
} BPMP_UNION_ANON;
} BPMP_ABI_PACKED;
@@ -862,7 +1118,6 @@ struct mrq_debug_response {
* @def MRQ_RESET
* @brief Reset an IP block
*
- * * Platforms: T186, T194
* * Initiators: Any
* * Targets: BPMP
* * Request Payload: @ref mrq_reset_request
@@ -872,39 +1127,46 @@ struct mrq_debug_response {
* @{
*/
+/**
+ * @brief Sub-command identifiers for #MRQ_RESET
+ */
enum mrq_reset_commands {
/**
* @brief Assert module reset
*
- * mrq_response::err is 0 if the operation was successful, or @n
- * -#BPMP_EINVAL if mrq_reset_request::reset_id is invalid @n
- * -#BPMP_EACCES if mrq master is not an owner of target domain reset @n
- * -#BPMP_ENOTSUP if target domain h/w state does not allow reset
+ * mrq_response::err is
+ * * 0 if the operation was successful
+ * * -#BPMP_EINVAL if mrq_reset_request::reset_id is invalid
+ * * -#BPMP_EACCES if mrq master is not an owner of target domain reset
+ * * -#BPMP_ENOTSUP if target domain h/w state does not allow reset
*/
CMD_RESET_ASSERT = 1,
/**
* @brief Deassert module reset
*
- * mrq_response::err is 0 if the operation was successful, or @n
- * -#BPMP_EINVAL if mrq_reset_request::reset_id is invalid @n
- * -#BPMP_EACCES if mrq master is not an owner of target domain reset @n
- * -#BPMP_ENOTSUP if target domain h/w state does not allow reset
+ * mrq_response::err is
+ * * 0 if the operation was successful
+ * * -#BPMP_EINVAL if mrq_reset_request::reset_id is invalid
+ * * -#BPMP_EACCES if mrq master is not an owner of target domain reset
+ * * -#BPMP_ENOTSUP if target domain h/w state does not allow reset
*/
CMD_RESET_DEASSERT = 2,
/**
* @brief Assert and deassert the module reset
*
- * mrq_response::err is 0 if the operation was successful, or @n
- * -#BPMP_EINVAL if mrq_reset_request::reset_id is invalid @n
- * -#BPMP_EACCES if mrq master is not an owner of target domain reset @n
- * -#BPMP_ENOTSUP if target domain h/w state does not allow reset
+ * mrq_response::err is
+ * * 0 if the operation was successful
+ * * -#BPMP_EINVAL if mrq_reset_request::reset_id is invalid
+ * * -#BPMP_EACCES if mrq master is not an owner of target domain reset
+ * * -#BPMP_ENOTSUP if target domain h/w state does not allow reset
*/
CMD_RESET_MODULE = 3,
/**
* @brief Get the highest reset ID
*
- * mrq_response::err is 0 if the operation was successful, or @n
- * -#BPMP_ENODEV if no reset domains are supported (number of IDs is 0)
+ * mrq_response::err is
+ * * 0 if the operation was successful
+ * * -#BPMP_ENODEV if no reset domains are supported (number of IDs is 0)
*/
CMD_RESET_GET_MAX_ID = 4,
@@ -913,15 +1175,15 @@ enum mrq_reset_commands {
};
/**
- * @brief Request with MRQ_RESET
+ * @brief Request with #MRQ_RESET
*
* Used by the sender of an #MRQ_RESET message to request BPMP to
- * assert or or deassert a given reset line.
+ * assert or deassert a given reset line.
*/
struct mrq_reset_request {
- /** @brief Reset action to perform (@ref mrq_reset_commands) */
+ /** @brief Reset action to perform, from @ref mrq_reset_commands */
uint32_t cmd;
- /** @brief Id of the reset to affected */
+ /** @brief ID of the reset to affected, from @ref bpmp_reset_ids */
uint32_t reset_id;
} BPMP_ABI_PACKED;
@@ -940,7 +1202,7 @@ struct cmd_reset_get_max_id_response {
*
* Each sub-command supported by @ref mrq_reset_request may return
* sub-command-specific data. Some do and some do not as indicated
- * in the following table
+ * in the following table:
*
* | sub-command | payload |
* |----------------------|------------------|
@@ -962,7 +1224,6 @@ struct mrq_reset_response {
* @def MRQ_I2C
* @brief Issue an i2c transaction
*
- * * Platforms: T186, T194
* * Initiators: Any
* * Targets: BPMP
* * Request Payload: @ref mrq_i2c_request
@@ -971,19 +1232,60 @@ struct mrq_reset_response {
* @addtogroup I2C
* @{
*/
+
+/**
+ * @brief Size of the cmd_i2c_xfer_request::data_buf -member array in bytes.
+ */
#define TEGRA_I2C_IPC_MAX_IN_BUF_SIZE (MSG_DATA_MIN_SZ - 12U)
+
+/**
+ * @brief Size of the cmd_i2c_xfer_response::data_buf -member array in bytes.
+ */
#define TEGRA_I2C_IPC_MAX_OUT_BUF_SIZE (MSG_DATA_MIN_SZ - 4U)
+/**
+ * @defgroup seriali2c_flags I2C flags
+ *
+ * @brief I2C transaction modifier flags for each transaction segment
+ * in #MRQ_I2C subcommand CMD_I2C_XFER
+ */
+
+/**
+ * @addtogroup seriali2c_flags
+ * @{
+ */
+
+/** @brief when set, use 10-bit I2C slave address */
#define SERIALI2C_TEN 0x0010U
+/** @brief when set, perform a Read transaction */
#define SERIALI2C_RD 0x0001U
-#define SERIALI2C_STOP 0x8000U
+/**
+ * @brief when set, no repeated START is issued between the segments
+ * of transaction. This flag is ignored for the first segment as any
+ * transaction always starts with a START condition
+ */
#define SERIALI2C_NOSTART 0x4000U
-#define SERIALI2C_REV_DIR_ADDR 0x2000U
+/**
+ * @brief when set, a no-ACK from slave device is ignored and treated
+ * always as success
+ */
#define SERIALI2C_IGNORE_NAK 0x1000U
+/** @} seriali2c_flags */
+
+/** brief Unused flag. Retained for backwards compatibility. */
+#define SERIALI2C_STOP 0x8000U
+/** brief Unused flag. Retained for backwards compatibility. */
+#define SERIALI2C_REV_DIR_ADDR 0x2000U
+/** brief Unused flag. Retained for backwards compatibility. */
#define SERIALI2C_NO_RD_ACK 0x0800U
+/** brief Unused flag. Retained for backwards compatibility. */
#define SERIALI2C_RECV_LEN 0x0400U
-enum {
+/**
+ * @brief Supported I2C sub-command identifiers
+ */
+enum mrq_i2c_commands {
+ /** @brief Perform an I2C transaction */
CMD_I2C_XFER = 1
};
@@ -1005,7 +1307,7 @@ enum {
struct serial_i2c_request {
/** @brief I2C slave address */
uint16_t addr;
- /** @brief Bitmask of SERIALI2C_ flags */
+ /** @brief Bitmask of @ref seriali2c_flags */
uint16_t flags;
/** @brief Length of I2C transaction in bytes */
uint16_t len;
@@ -1020,13 +1322,13 @@ struct cmd_i2c_xfer_request {
/**
* @brief Tegra PWR_I2C bus identifier
*
- * @cond (bpmp_t234 || bpmp_t238 || bpmp_t194)
+ * @cond (bpmp_t186 || bpmp_t194 || bpmp_t234 || bpmp_t238 || bpmp_t264)
* Must be set to 5.
- * @endcond (bpmp_t234 || bpmp_t238 || bpmp_t194)
- * @cond bpmp_th500
- * Must be set to 1.
- * @endcond bpmp_th500
+ * @endcond
*
+ * @cond (bpmp_th500)
+ * Must be set to 1.
+ * @endcond
*/
uint32_t bus_id;
@@ -1047,7 +1349,7 @@ struct cmd_i2c_xfer_request {
struct cmd_i2c_xfer_response {
/** @brief Count of valid bytes in #data_buf*/
uint32_t data_size;
- /** @brief I2c read data */
+ /** @brief I2C read data */
uint8_t data_buf[TEGRA_I2C_IPC_MAX_OUT_BUF_SIZE];
} BPMP_ABI_PACKED;
@@ -1064,16 +1366,19 @@ struct mrq_i2c_request {
/**
* @brief Response to #MRQ_I2C
*
- * mrq_response:err is
- * 0: Success
- * -#BPMP_EBADCMD: if mrq_i2c_request::cmd is other than 1
- * -#BPMP_EINVAL: if cmd_i2c_xfer_request does not contain correctly formatted request
- * -#BPMP_ENODEV: if cmd_i2c_xfer_request::bus_id is not supported by BPMP
- * -#BPMP_EACCES: if i2c transaction is not allowed due to firewall rules
- * -#BPMP_ETIMEDOUT: if i2c transaction times out
- * -#BPMP_ENXIO: if i2c slave device does not reply with ACK to the transaction
- * -#BPMP_EAGAIN: if ARB_LOST condition is detected by the i2c controller
- * -#BPMP_EIO: any other i2c controller error code than NO_ACK or ARB_LOST
+ * mrq_response::err value for this response is defined as:
+ *
+ * | Value | Description |
+ * |--------------------|---------------------------------------------------------------------|
+ * | 0 | Success |
+ * | -#BPMP_EBADCMD | mrq_i2c_request::cmd is other than 1 |
+ * | -#BPMP_EINVAL | cmd_i2c_xfer_request does not contain correctly formatted request |
+ * | -#BPMP_ENODEV | cmd_i2c_xfer_request::bus_id is not supported by BPMP |
+ * | -#BPMP_EACCES | I2C transaction is not allowed due to firewall rules |
+ * | -#BPMP_ETIMEDOUT | I2C transaction times out |
+ * | -#BPMP_ENXIO | I2C slave device does not reply with ACK to the transaction |
+ * | -#BPMP_EAGAIN | ARB_LOST condition is detected by the I2C controller |
+ * | -#BPMP_EIO | Any other I2C controller error code than NO_ACK or ARB_LOST |
*/
struct mrq_i2c_response {
struct cmd_i2c_xfer_response xfer;
@@ -1086,7 +1391,6 @@ struct mrq_i2c_response {
* @def MRQ_CLK
* @brief Perform a clock operation
*
- * * Platforms: T186, T194
* * Initiators: Any
* * Targets: BPMP
* * Request Payload: @ref mrq_clk_request
@@ -1095,205 +1399,354 @@ struct mrq_i2c_response {
* @addtogroup Clocks
* @{
*/
-enum {
+
+/**
+ * @brief Sub-command identifiers for #MRQ_CLK
+ */
+enum mrq_clk_commands {
+ /** Get clock rate */
CMD_CLK_GET_RATE = 1,
+
+ /** Set clock rate */
CMD_CLK_SET_RATE = 2,
+
+ /** Get attainable clock rate closer to a given rate */
CMD_CLK_ROUND_RATE = 3,
+
+ /** Get parent clock identifier for a given clock */
CMD_CLK_GET_PARENT = 4,
+
+ /** Change clock parent */
CMD_CLK_SET_PARENT = 5,
+
+ /** Get clock enable status */
CMD_CLK_IS_ENABLED = 6,
+
+ /** Enable a clock */
CMD_CLK_ENABLE = 7,
+
+ /** Disable a clock */
CMD_CLK_DISABLE = 8,
-/** @cond DEPRECATED */
- CMD_CLK_PROPERTIES = 9,
- CMD_CLK_POSSIBLE_PARENTS = 10,
- CMD_CLK_NUM_POSSIBLE_PARENTS = 11,
- CMD_CLK_GET_POSSIBLE_PARENT = 12,
- CMD_CLK_RESET_REFCOUNTS = 13,
-/** @endcond DEPRECATED */
+
+ /** Get all information about a clock */
CMD_CLK_GET_ALL_INFO = 14,
+
+ /** Get largest supported clock identifier */
CMD_CLK_GET_MAX_CLK_ID = 15,
+
+ /** Get clock maximum rate at VMIN */
CMD_CLK_GET_FMAX_AT_VMIN = 16,
+
+ /** Largest supported #MRQ_CLK sub-command identifier + 1 */
CMD_CLK_MAX,
};
+/**
+ * Flag bit set in cmd_clk_get_all_info_response::flags -field when clock
+ * supports changing of the parent clock at runtime.
+ */
#define BPMP_CLK_HAS_MUX (1U << 0U)
+
+/**
+ * Flag bit set in cmd_clk_get_all_info_response::flags -field when clock
+ * supports changing the clock rate at runtime.
+ */
#define BPMP_CLK_HAS_SET_RATE (1U << 1U)
+
+/**
+ * Flag bit set in cmd_clk_get_all_info_response::flags -field when clock is a
+ * root clock without visible parents.
+ */
#define BPMP_CLK_IS_ROOT (1U << 2U)
+
#define BPMP_CLK_IS_VAR_ROOT (1U << 3U)
+
/**
* @brief Protection against rate and parent changes
*
- * #MRQ_CLK command #CMD_CLK_SET_RATE or #MRQ_CLK command #CMD_CLK_SET_PARENT will return
- * -#BPMP_EACCES.
+ * #MRQ_CLK command #CMD_CLK_SET_RATE or #MRQ_CLK command #CMD_CLK_SET_PARENT
+ * will return -#BPMP_EACCES.
*/
#define BPMP_CLK_RATE_PARENT_CHANGE_DENIED (1U << 30)
/**
* @brief Protection against state changes
*
- * #MRQ_CLK command #CMD_CLK_ENABLE or #MRQ_CLK command #CMD_CLK_DISABLE will return
- * -#BPMP_EACCES.
+ * #MRQ_CLK command #CMD_CLK_ENABLE or #MRQ_CLK command #CMD_CLK_DISABLE
+ * will return -#BPMP_EACCES.
*/
#define BPMP_CLK_STATE_CHANGE_DENIED (1U << 31)
+/**
+ * Size of the cmd_clk_get_all_info_response::name -array in number
+ * of elements.
+ */
#define MRQ_CLK_NAME_MAXLEN 40U
+
+/**
+ * @brief Maximum number of elements in parent_id arrays of clock info responses.
+ */
#define MRQ_CLK_MAX_PARENTS 16U
-/** @private */
+/**
+ * @brief Request payload for #MRQ_CLK sub-command #CMD_CLK_GET_RATE
+ *
+ * This structure is an empty placeholder for future expansion of this
+ * sub-command.
+ */
struct cmd_clk_get_rate_request {
BPMP_ABI_EMPTY
} BPMP_ABI_PACKED;
+/**
+ * @brief Response payload for #MRQ_CLK sub-command #CMD_CLK_GET_RATE
+ */
struct cmd_clk_get_rate_response {
+ /**
+ * Current rate of the given clock in Hz if mrq_response::err is 0 to
+ * indicate successful #CMD_CLK_GET_RATE -request.
+ */
int64_t rate;
} BPMP_ABI_PACKED;
+/**
+ * @brief Request payload for #MRQ_CLK sub-command #CMD_CLK_SET_RATE
+ */
struct cmd_clk_set_rate_request {
+ /** Unused / reserved field. */
int32_t unused;
+
+ /** Requested rate of the clock in Hz. */
int64_t rate;
} BPMP_ABI_PACKED;
+/**
+ * @brief Response payload for #MRQ_CLK sub-command #CMD_CLK_SET_RATE
+ */
struct cmd_clk_set_rate_response {
+ /**
+ * If request was successful (mrq_response::err is 0), set to the new
+ * rate of the given clock in Hz.
+ */
int64_t rate;
} BPMP_ABI_PACKED;
+/**
+ * @brief Request payload for #MRQ_CLK sub-command #CMD_CLK_ROUND_RATE
+ */
struct cmd_clk_round_rate_request {
+ /** Unused / reserved field. */
int32_t unused;
+
+ /** Target rate for the clock */
int64_t rate;
} BPMP_ABI_PACKED;
+/**
+ * @brief Response payload for #MRQ_CLK sub-command #CMD_CLK_ROUND_RATE
+ */
struct cmd_clk_round_rate_response {
+ /**
+ * The attainable rate if request was successful
+ * (mrq_response::err is 0).
+ */
int64_t rate;
} BPMP_ABI_PACKED;
-/** @private */
+/**
+ * @brief Request payload for #MRQ_CLK sub-command #CMD_CLK_GET_PARENT
+ *
+ * This structure is an empty placeholder for future expansion of this
+ * sub-command.
+ */
struct cmd_clk_get_parent_request {
BPMP_ABI_EMPTY
} BPMP_ABI_PACKED;
+/**
+ * @brief Response payload for #MRQ_CLK sub-command #CMD_CLK_GET_PARENT
+ */
struct cmd_clk_get_parent_response {
+ /**
+ * The clock identifier of the parent clock if request was successful
+ * (mrq_response::err is 0).
+ */
uint32_t parent_id;
} BPMP_ABI_PACKED;
+/**
+ * @brief Request payload for #MRQ_CLK sub-command #CMD_CLK_SET_PARENT
+ */
struct cmd_clk_set_parent_request {
+ /**
+ * The clock identifier of the new parent clock.
+ */
uint32_t parent_id;
} BPMP_ABI_PACKED;
+/**
+ * @brief Response payload for #MRQ_CLK sub-command #CMD_CLK_SET_PARENT
+ */
struct cmd_clk_set_parent_response {
+ /**
+ * The clock identifier of the new parent clock if request was
+ * successful (mrq_response::err is 0).
+ */
uint32_t parent_id;
} BPMP_ABI_PACKED;
-/** @private */
+/**
+ * @brief Request payload for #CMD_CLK_IS_ENABLED -sub-command
+ *
+ * This structure is an empty placeholder for future expansion of this
+ * sub-command.
+ */
struct cmd_clk_is_enabled_request {
BPMP_ABI_EMPTY
} BPMP_ABI_PACKED;
/**
- * @brief Response data to #MRQ_CLK sub-command CMD_CLK_IS_ENABLED
+ * @brief Response payload for #MRQ_CLK sub-command #CMD_CLK_IS_ENABLED
*/
struct cmd_clk_is_enabled_response {
/**
* @brief The state of the clock that has been successfully
- * requested with CMD_CLK_ENABLE or CMD_CLK_DISABLE by the
+ * requested with #CMD_CLK_ENABLE or #CMD_CLK_DISABLE by the
* master invoking the command earlier.
*
* The state may not reflect the physical state of the clock
* if there are some other masters requesting it to be
- * enabled.
+ * enabled. Valid values:
*
- * Value 0 is disabled, all other values indicate enabled.
+ * * Value 0: The clock is disabled,
+ * * Value 1: The clock is enabled.
*/
int32_t state;
} BPMP_ABI_PACKED;
-/** @private */
+/**
+ * @brief Request payload for #MRQ_CLK sub-command #CMD_CLK_ENABLE
+ *
+ * This structure is an empty placeholder for future expansion of this
+ * sub-command.
+ */
struct cmd_clk_enable_request {
BPMP_ABI_EMPTY
} BPMP_ABI_PACKED;
-/** @private */
+/**
+ * @brief Response payload for #MRQ_CLK sub-command #CMD_CLK_ENABLE
+ *
+ * This structure is an empty placeholder for future expansion of this
+ * sub-command.
+ */
struct cmd_clk_enable_response {
BPMP_ABI_EMPTY
} BPMP_ABI_PACKED;
-/** @private */
+/**
+ * @brief Request payload for #MRQ_CLK sub-command #CMD_CLK_DISABLE
+ *
+ * This structure is an empty placeholder for future expansion of this
+ * sub-command.
+ */
struct cmd_clk_disable_request {
BPMP_ABI_EMPTY
} BPMP_ABI_PACKED;
-/** @private */
+/**
+ * @brief Response payload for #MRQ_CLK sub-command #CMD_CLK_DISABLE
+ *
+ * This structure is an empty placeholder for future expansion of this
+ * sub-command.
+ */
struct cmd_clk_disable_response {
BPMP_ABI_EMPTY
} BPMP_ABI_PACKED;
-/** @cond DEPRECATED */
-/** @private */
-struct cmd_clk_properties_request {
- BPMP_ABI_EMPTY
-} BPMP_ABI_PACKED;
-
-/** @todo flags need to be spelled out here */
-struct cmd_clk_properties_response {
- uint32_t flags;
-} BPMP_ABI_PACKED;
-
-/** @private */
-struct cmd_clk_possible_parents_request {
- BPMP_ABI_EMPTY
-} BPMP_ABI_PACKED;
-
-struct cmd_clk_possible_parents_response {
- uint8_t num_parents;
- uint8_t reserved[3];
- uint32_t parent_id[MRQ_CLK_MAX_PARENTS];
-} BPMP_ABI_PACKED;
-
-/** @private */
-struct cmd_clk_num_possible_parents_request {
- BPMP_ABI_EMPTY
-} BPMP_ABI_PACKED;
-
-struct cmd_clk_num_possible_parents_response {
- uint8_t num_parents;
-} BPMP_ABI_PACKED;
-
-struct cmd_clk_get_possible_parent_request {
- uint8_t parent_idx;
-} BPMP_ABI_PACKED;
-
-struct cmd_clk_get_possible_parent_response {
- uint32_t parent_id;
-} BPMP_ABI_PACKED;
-/** @endcond DEPRECATED */
-
-/** @private */
+/**
+ * @brief Request payload for #MRQ_CLK sub-command #CMD_CLK_GET_ALL_INFO
+ *
+ * This structure is an empty placeholder for future expansion of this
+ * sub-command.
+ */
struct cmd_clk_get_all_info_request {
BPMP_ABI_EMPTY
} BPMP_ABI_PACKED;
+
+/**
+ * @brief Response payload for #MRQ_CLK sub-command #CMD_CLK_GET_ALL_INFO
+ *
+ * The values in the response are only set and valid if request status in
+ * mrq_response::err is 0.
+ */
struct cmd_clk_get_all_info_response {
+ /**
+ * State / informational flags for the clock:
+ *
+ * | Flag bit | Description |
+ * |------------------------|------------------------------------------|
+ * | #BPMP_CLK_IS_ROOT | Clock is a root clock. |
+ * | #BPMP_CLK_HAS_MUX | Clock supports changing of parent clock. |
+ * | #BPMP_CLK_HAS_SET_RATE | Clock supports changing clock rate. |
+ */
uint32_t flags;
+
+ /**
+ * Current parent clock identifier.
+ */
uint32_t parent;
+
+ /**
+ * Array of possible parent clock identifiers.
+ */
uint32_t parents[MRQ_CLK_MAX_PARENTS];
+
+ /**
+ * Number of identifiers in the #parents -array.
+ */
uint8_t num_parents;
+
+ /**
+ * Friendly name of the clock, truncated to fit the array
+ * and null-terminated.
+ */
uint8_t name[MRQ_CLK_NAME_MAXLEN];
} BPMP_ABI_PACKED;
-/** @private */
+
+/**
+ * @brief Request payload for #MRQ_CLK sub-command #CMD_CLK_GET_MAX_CLK_ID
+ *
+ * This structure is an empty placeholder for future expansion of this
+ * sub-command.
+ */
struct cmd_clk_get_max_clk_id_request {
BPMP_ABI_EMPTY
} BPMP_ABI_PACKED;
+/**
+ * @brief Response payload for #MRQ_CLK sub-command #CMD_CLK_GET_MAX_CLK_ID
+ */
struct cmd_clk_get_max_clk_id_response {
+ /** @brief Largest supported clock identifier. */
uint32_t max_id;
} BPMP_ABI_PACKED;
-/** @private */
+/**
+ * @brief Request payload for #MRQ_CLK sub-command #CMD_CLK_GET_FMAX_AT_VMIN
+ *
+ * This structure is an empty placeholder for future expansion of this
+ * sub-command.
+ */
struct cmd_clk_get_fmax_at_vmin_request {
BPMP_ABI_EMPTY
} BPMP_ABI_PACKED;
+/**
+ * @brief Response payload for #MRQ_CLK sub-command #CMD_CLK_GET_FMAX_AT_VMIN
+ */
struct cmd_clk_get_fmax_at_vmin_response {
int64_t rate;
} BPMP_ABI_PACKED;
@@ -1308,38 +1761,26 @@ struct cmd_clk_get_fmax_at_vmin_response {
* require no additional data. Others have a sub-command specific
* payload
*
- * |sub-command |payload |
- * |----------------------------|-----------------------|
- * |CMD_CLK_GET_RATE |- |
- * |CMD_CLK_SET_RATE |clk_set_rate |
- * |CMD_CLK_ROUND_RATE |clk_round_rate |
- * |CMD_CLK_GET_PARENT |- |
- * |CMD_CLK_SET_PARENT |clk_set_parent |
- * |CMD_CLK_IS_ENABLED |- |
- * |CMD_CLK_ENABLE |- |
- * |CMD_CLK_DISABLE |- |
- * |CMD_CLK_GET_ALL_INFO |- |
- * |CMD_CLK_GET_MAX_CLK_ID |- |
- * |CMD_CLK_GET_FMAX_AT_VMIN |-
- * |
- *
+ * |Sub-command |Payload |
+ * |----------------------------|-----------------------------|
+ * |#CMD_CLK_GET_RATE |- |
+ * |#CMD_CLK_SET_RATE |#cmd_clk_set_rate_request |
+ * |#CMD_CLK_ROUND_RATE |#cmd_clk_round_rate_request |
+ * |#CMD_CLK_GET_PARENT |- |
+ * |#CMD_CLK_SET_PARENT |#cmd_clk_set_parent_request |
+ * |#CMD_CLK_IS_ENABLED |- |
+ * |#CMD_CLK_ENABLE |- |
+ * |#CMD_CLK_DISABLE |- |
+ * |#CMD_CLK_GET_ALL_INFO |- |
+ * |#CMD_CLK_GET_MAX_CLK_ID |- |
+ * |#CMD_CLK_GET_FMAX_AT_VMIN |- |
*/
-/** @cond DEPRECATED
- *
- * Older versions of firmware also supported following sub-commands:
- * |CMD_CLK_PROPERTIES |- |
- * |CMD_CLK_POSSIBLE_PARENTS |- |
- * |CMD_CLK_NUM_POSSIBLE_PARENTS|- |
- * |CMD_CLK_GET_POSSIBLE_PARENT |clk_get_possible_parent|
- * |CMD_CLK_RESET_REFCOUNTS |- |
- *
- * @endcond DEPRECATED */
-
struct mrq_clk_request {
/** @brief Sub-command and clock id concatenated to 32-bit word.
- * - bits[31..24] is the sub-cmd.
- * - bits[23..0] is the clock id
+ *
+ * - bits[31..24] is the sub-command ID from @ref mrq_clk_commands.
+ * - bits[23..0] is the clock identifier from @ref bpmp_clock_ids.
*/
uint32_t cmd_and_id;
@@ -1357,15 +1798,6 @@ struct mrq_clk_request {
struct cmd_clk_disable_request clk_disable;
/** @private */
struct cmd_clk_is_enabled_request clk_is_enabled;
- /** @cond DEPRECATED */
- /** @private */
- struct cmd_clk_properties_request clk_properties;
- /** @private */
- struct cmd_clk_possible_parents_request clk_possible_parents;
- /** @private */
- struct cmd_clk_num_possible_parents_request clk_num_possible_parents;
- struct cmd_clk_get_possible_parent_request clk_get_possible_parent;
- /** @endcond DEPRECATED */
/** @private */
struct cmd_clk_get_all_info_request clk_get_all_info;
/** @private */
@@ -1381,35 +1813,24 @@ struct mrq_clk_request {
*
* Each sub-command supported by @ref mrq_clk_request may return
* sub-command-specific data. Some do and some do not as indicated in
- * the following table
+ * the following table:
*
- * |sub-command |payload |
- * |----------------------------|------------------------|
- * |CMD_CLK_GET_RATE |clk_get_rate |
- * |CMD_CLK_SET_RATE |clk_set_rate |
- * |CMD_CLK_ROUND_RATE |clk_round_rate |
- * |CMD_CLK_GET_PARENT |clk_get_parent |
- * |CMD_CLK_SET_PARENT |clk_set_parent |
- * |CMD_CLK_IS_ENABLED |clk_is_enabled |
- * |CMD_CLK_ENABLE |- |
- * |CMD_CLK_DISABLE |- |
- * |CMD_CLK_GET_ALL_INFO |clk_get_all_info |
- * |CMD_CLK_GET_MAX_CLK_ID |clk_get_max_id |
- * |CMD_CLK_GET_FMAX_AT_VMIN |clk_get_fmax_at_vmin |
+ * |Sub-command |Payload |
+ * |----------------------------|-----------------------------------|
+ * |#CMD_CLK_GET_RATE |#cmd_clk_get_rate_response |
+ * |#CMD_CLK_SET_RATE |#cmd_clk_set_rate_response |
+ * |#CMD_CLK_ROUND_RATE |#cmd_clk_round_rate_response |
+ * |#CMD_CLK_GET_PARENT |#cmd_clk_get_parent_response |
+ * |#CMD_CLK_SET_PARENT |#cmd_clk_set_parent_response |
+ * |#CMD_CLK_IS_ENABLED |#cmd_clk_is_enabled_response |
+ * |#CMD_CLK_ENABLE |- |
+ * |#CMD_CLK_DISABLE |- |
+ * |#CMD_CLK_GET_ALL_INFO |#cmd_clk_get_all_info_response |
+ * |#CMD_CLK_GET_MAX_CLK_ID |#cmd_clk_get_max_clk_id_response |
+ * |#CMD_CLK_GET_FMAX_AT_VMIN |#cmd_clk_get_fmax_at_vmin_response |
*
*/
-/** @cond DEPRECATED
- *
- * Older versions of firmware also supported following sub-commands:
- * |CMD_CLK_PROPERTIES |clk_properties |
- * |CMD_CLK_POSSIBLE_PARENTS |clk_possible_parents |
- * |CMD_CLK_NUM_POSSIBLE_PARENTS|clk_num_possible_parents|
- * |CMD_CLK_GET_POSSIBLE_PARENT |clk_get_possible_parents|
- * |CMD_CLK_RESET_REFCOUNTS |- |
- *
- * @endcond DEPRECATED */
-
struct mrq_clk_response {
union {
struct cmd_clk_get_rate_response clk_get_rate;
@@ -1422,12 +1843,6 @@ struct mrq_clk_response {
/** @private */
struct cmd_clk_disable_response clk_disable;
struct cmd_clk_is_enabled_response clk_is_enabled;
- /** @cond DEPRECATED */
- struct cmd_clk_properties_response clk_properties;
- struct cmd_clk_possible_parents_response clk_possible_parents;
- struct cmd_clk_num_possible_parents_response clk_num_possible_parents;
- struct cmd_clk_get_possible_parent_response clk_get_possible_parent;
- /** @endcond DEPRECATED */
struct cmd_clk_get_all_info_response clk_get_all_info;
struct cmd_clk_get_max_clk_id_response clk_get_max_clk_id;
struct cmd_clk_get_fmax_at_vmin_response clk_get_fmax_at_vmin;
@@ -1441,7 +1856,6 @@ struct mrq_clk_response {
* @def MRQ_QUERY_ABI
* @brief Check if an MRQ is implemented
*
- * * Platforms: All
* * Initiators: Any
* * Targets: Any except DMCE
* * Request Payload: @ref mrq_query_abi_request
@@ -1450,7 +1864,7 @@ struct mrq_clk_response {
/**
* @ingroup ABI_info
- * @brief Request with MRQ_QUERY_ABI
+ * @brief Request with #MRQ_QUERY_ABI
*
* Used by #MRQ_QUERY_ABI call to check if MRQ code #mrq is supported
* by the recipient.
@@ -1468,7 +1882,11 @@ struct mrq_query_abi_request {
* successful, not that the MRQ itself is supported!
*/
struct mrq_query_abi_response {
- /** @brief 0 if queried MRQ is supported. Else, -#BPMP_ENODEV */
+ /**
+ * This response field is set to:
+ * - 0 if queried MRQ is supported, or
+ * - -#BPMP_ENODEV if queried MRQ is not supported
+ */
int32_t status;
} BPMP_ABI_PACKED;
@@ -1476,9 +1894,7 @@ struct mrq_query_abi_response {
*
* @ingroup MRQ_Codes
* @def MRQ_PG
- * @brief Control power-gating state of a partition. In contrast to
- * MRQ_PG_UPDATE_STATE, operations that change the power partition
- * state are NOT reference counted
+ * @brief Control power-gating state of a partition.
*
* @cond (bpmp_t194 || bpmp_t186)
* @note On T194 and earlier BPMP-FW forcefully turns off some partitions as
@@ -1486,9 +1902,8 @@ struct mrq_query_abi_response {
* Therefore, it is recommended to power off all domains via MRQ_PG prior to SC7
* entry.
* See @ref bpmp_pdomain_ids for further detail.
- * @endcond (bpmp_t194 || bpmp_t186)
+ * @endcond
*
- * * Platforms: T186, T194
* * Initiators: Any
* * Targets: BPMP
* * Request Payload: @ref mrq_pg_request
@@ -1497,6 +1912,10 @@ struct mrq_query_abi_response {
* @addtogroup Powergating
* @{
*/
+
+/**
+ * @brief Sub-command identifiers for #MRQ_PG -command.
+ */
enum mrq_pg_cmd {
/**
* @brief Check whether the BPMP driver supports the specified
@@ -1512,9 +1931,14 @@ enum mrq_pg_cmd {
* possible values for power domains are defined in enum
* pg_states
*
- * mrq_response:err is
- * 0: Success
- * -#BPMP_EINVAL: Invalid request parameters
+ * mrq_response:err for this sub-command is defined as:
+ *
+ * | Value | Description |
+ * | -------------- | ------------------------------------------------------------------------ |
+ * | 0 | Request was successful. |
+ * | -#BPMP_EINVAL | Invalid request parameters were provided. |
+ * | -#BPMP_EACCES | Permission denied or always-off partition was attempted to be turned on. |
+ * | Any other <0 | Internal error while performing the operation. |
*/
CMD_PG_SET_STATE = 1,
@@ -1523,18 +1947,26 @@ enum mrq_pg_cmd {
* possible values for power domains are defined in enum
* pg_states
*
- * mrq_response:err is
- * 0: Success
- * -#BPMP_EINVAL: Invalid request parameters
+ * mrq_response:err for this sub-command is defined as:
+ *
+ * | Value | Description |
+ * | -------------- | ---------------------------------------------- |
+ * | 0 | Request was successful. |
+ * | -#BPMP_EINVAL | Invalid request parameters were provided. |
+ * | Any other <0 | Internal error while performing the operation. |
*/
CMD_PG_GET_STATE = 2,
/**
* @brief Get the name string of specified power domain id.
*
- * mrq_response:err is
- * 0: Success
- * -#BPMP_EINVAL: Invalid request parameters
+ * mrq_response:err for this sub-command is defined as:
+ *
+ * | Value | Description |
+ * | -------------- | ---------------------------------------------- |
+ * | 0 | Request was successful. |
+ * | -#BPMP_EINVAL | Invalid request parameters were provided. |
+ * | Any other <0 | Internal error while performing the operation. |
*/
CMD_PG_GET_NAME = 3,
@@ -1543,20 +1975,29 @@ enum mrq_pg_cmd {
* @brief Get the highest power domain id in the system. Not
* all IDs between 0 and max_id are valid IDs.
*
- * mrq_response:err is
- * 0: Success
- * -#BPMP_EINVAL: Invalid request parameters
+ * mrq_response:err for this sub-command is defined as:
+ *
+ * | Value | Description |
+ * | -------------- | ---------------------------------------------- |
+ * | 0 | Request was successful. |
+ * | -#BPMP_EINVAL | Invalid request parameters were provided. |
+ * | Any other <0 | Internal error while performing the operation. |
*/
CMD_PG_GET_MAX_ID = 4,
};
#define MRQ_PG_NAME_MAXLEN 40
+/**
+ * @brief State value for the cmd_pg_set_state_request::state -field.
+ */
enum pg_states {
/** @brief Power domain is OFF */
PG_STATE_OFF = 0,
/** @brief Power domain is ON */
PG_STATE_ON = 1,
+
+ /** @cond bpmp_t186 */
/**
* @brief a legacy state where power domain and the clock
* associated to the domain are ON.
@@ -1564,40 +2005,51 @@ enum pg_states {
* deprecated.
*/
PG_STATE_RUNNING = 2,
+ /** @endcond */
};
struct cmd_pg_query_abi_request {
- /** @ref mrq_pg_cmd */
+ /** #MRQ_PG sub-command identifier from @ref mrq_pg_cmd */
uint32_t type;
} BPMP_ABI_PACKED;
struct cmd_pg_set_state_request {
- /** @ref pg_states */
+ /** One of the state values from @ref pg_states */
uint32_t state;
} BPMP_ABI_PACKED;
/**
- * @brief Response data to #MRQ_PG sub command #CMD_PG_GET_STATE
+ * @brief Response payload for the #MRQ_PG sub-command #CMD_PG_GET_STATE
*/
struct cmd_pg_get_state_response {
/**
* @brief The state of the power partition that has been
- * succesfuly requested by the master earlier using #MRQ_PG
+ * successfully requested by the master earlier using #MRQ_PG
* command #CMD_PG_SET_STATE.
*
* The state may not reflect the physical state of the power
* partition if there are some other masters requesting it to
* be enabled.
*
- * See @ref pg_states for possible values
+ * See @ref pg_states for possible values.
*/
uint32_t state;
} BPMP_ABI_PACKED;
+/**
+ * @brief Response payload for the #MRQ_PG sub-command #CMD_PG_GET_NAME
+ */
struct cmd_pg_get_name_response {
+ /**
+ * @brief On successful response contains the null-terminated
+ * friendly name of the requested power-domain.
+ */
uint8_t name[MRQ_PG_NAME_MAXLEN];
} BPMP_ABI_PACKED;
+/**
+ * @brief Response payload for the #MRQ_PG sub-command #CMD_PG_GET_MAX_ID
+ */
struct cmd_pg_get_max_id_response {
uint32_t max_id;
} BPMP_ABI_PACKED;
@@ -1606,22 +2058,28 @@ struct cmd_pg_get_max_id_response {
* @brief Request with #MRQ_PG
*
* Used by the sender of an #MRQ_PG message to control power
- * partitions. The pg_request is split into several sub-commands. Some
- * sub-commands require no additional data. Others have a sub-command
- * specific payload
+ * partitions. The expected payload depends on the sub-command identifier.
+ * Some sub-commands require no additional data while others have a sub-command
+ * specific payload:
*
- * |sub-command |payload |
- * |----------------------------|-----------------------|
- * |CMD_PG_QUERY_ABI | query_abi |
- * |CMD_PG_SET_STATE | set_state |
- * |CMD_PG_GET_STATE | - |
- * |CMD_PG_GET_NAME | - |
- * |CMD_PG_GET_MAX_ID | - |
+ * |Sub-command |Payload |
+ * |----------------------------|---------------------------|
+ * |#CMD_PG_QUERY_ABI | #cmd_pg_query_abi_request |
+ * |#CMD_PG_SET_STATE | #cmd_pg_set_state_request |
+ * |#CMD_PG_GET_STATE | - |
+ * |#CMD_PG_GET_NAME | - |
+ * |#CMD_PG_GET_MAX_ID | - |
*
*/
struct mrq_pg_request {
+ /** @brief Sub-command identifier from @ref mrq_pg_cmd. */
uint32_t cmd;
+
+ /**
+ * @brief Power-domain identifier
+ */
uint32_t id;
+
union {
struct cmd_pg_query_abi_request query_abi;
struct cmd_pg_set_state_request set_state;
@@ -1629,19 +2087,18 @@ struct mrq_pg_request {
} BPMP_ABI_PACKED;
/**
- * @brief Response to MRQ_PG
+ * @brief Response to #MRQ_PG
*
- * Each sub-command supported by @ref mrq_pg_request may return
- * sub-command-specific data. Some do and some do not as indicated in
- * the following table
+ * Some of the #MRQ_PG sub-commands return a sub-command -specific payload
+ * as specified in the following table:
*
- * |sub-command |payload |
- * |----------------------------|-----------------------|
- * |CMD_PG_QUERY_ABI | - |
- * |CMD_PG_SET_STATE | - |
- * |CMD_PG_GET_STATE | get_state |
- * |CMD_PG_GET_NAME | get_name |
- * |CMD_PG_GET_MAX_ID | get_max_id |
+ * |Sub-command |Payload |
+ * |--------------------|------------------------------|
+ * |#CMD_PG_QUERY_ABI | - |
+ * |#CMD_PG_SET_STATE | - |
+ * |#CMD_PG_GET_STATE | #cmd_pg_get_state_response |
+ * |#CMD_PG_GET_NAME | #cmd_pg_get_name_response |
+ * |#CMD_PG_GET_MAX_ID | #cmd_pg_get_max_id_response |
*/
struct mrq_pg_response {
union {
@@ -1658,11 +2115,10 @@ struct mrq_pg_response {
* @def MRQ_THERMAL
* @brief Interact with BPMP thermal framework
*
- * * Platforms: T186, T194
* * Initiators: Any
* * Targets: Any
- * * Request Payload: TODO
- * * Response Payload: TODO
+ * * Request Payload: #mrq_thermal_host_to_bpmp_request
+ * * Response Payload: #mrq_thermal_bpmp_to_host_response
*
* @addtogroup Thermal
*
@@ -1686,10 +2142,14 @@ struct mrq_pg_response {
* payload of @ref mrq_thermal_bpmp_to_host_request.
* @{
*/
+
+/**
+ * @brief Sub-command identifiers for Host->BPMP #MRQ_THERMAL -command.
+ */
enum mrq_thermal_host_to_bpmp_cmd {
/**
- * @brief Check whether the BPMP driver supports the specified
- * request type.
+ * @brief Check whether BPMP-FW supports the specified
+ * #MRQ_THERMAL sub-command.
*
* Host needs to supply request parameters.
*
@@ -1703,31 +2163,44 @@ enum mrq_thermal_host_to_bpmp_cmd {
*
* Host needs to supply request parameters.
*
- * mrq_response::err is
- * * 0: Temperature query succeeded.
- * * -#BPMP_EINVAL: Invalid request parameters.
- * * -#BPMP_ENOENT: No driver registered for thermal zone..
- * * -#BPMP_EFAULT: Problem reading temperature measurement.
+ * mrq_response::err value for this sub-command is:
+ *
+ * | Value | Description |
+ * | -------------- | ----------------------------------------- |
+ * | 0 | Temperature query succeeded. |
+ * | -#BPMP_EINVAL | Invalid request parameters. |
+ * | -#BPMP_ENOENT | No driver registered for thermal zone. |
+ * | -#BPMP_EFAULT | Problem reading temperature measurement. |
*/
CMD_THERMAL_GET_TEMP = 1,
/**
+ * @cond (!bpmp_safe && !bpmp_t264)
* @brief Enable or disable and set the lower and upper
* thermal limits for a thermal trip point. Each zone has
* one trip point.
*
* Host needs to supply request parameters. Once the
* temperature hits a trip point, the BPMP will send a message
- * to the CPU having MRQ=MRQ_THERMAL and
- * type=CMD_THERMAL_HOST_TRIP_REACHED
+ * to the CPU having MRQ command identifier equal to #MRQ_THERMAL and
+ * sub-command identifier equal to #CMD_THERMAL_HOST_TRIP_REACHED.
*
- * mrq_response::err is
- * * 0: Trip successfully set.
- * * -#BPMP_EINVAL: Invalid request parameters.
- * * -#BPMP_ENOENT: No driver registered for thermal zone.
- * * -#BPMP_EFAULT: Problem setting trip point.
+ * If #CMD_THERMAL_SET_TRIP -sub-command is issued for a
+ * thermal zone that is currently power gated and unable to
+ * report temperature, a temperature of -256C is used as
+ * temperature for evaluation of the trip.
+ *
+ * mrq_response::err for this sub-command is defined as:
+ *
+ * | Value | Description |
+ * | --------------- | -------------------------------------- |
+ * | 0 | Trip successfully set. |
+ * | -#BPMP_EINVAL | Invalid request parameters. |
+ * | -#BPMP_ENOENT | No driver registered for thermal zone. |
+ * | -#BPMP_EFAULT | Problem setting trip point. |
*/
CMD_THERMAL_SET_TRIP = 2,
+ /** @endcond */
/**
* @brief Get the number of supported thermal zones.
@@ -1739,135 +2212,153 @@ enum mrq_thermal_host_to_bpmp_cmd {
CMD_THERMAL_GET_NUM_ZONES = 3,
/**
- * @brief Get the thermtrip of the specified zone.
+ * @brief Get the thermal trip value of the specified zone.
*
* Host needs to supply request parameters.
*
- * mrq_response::err is
- * * 0: Valid zone information returned.
- * * -#BPMP_EINVAL: Invalid request parameters.
- * * -#BPMP_ENOENT: No driver registered for thermal zone.
- * * -#BPMP_ERANGE if thermtrip is invalid or disabled.
- * * -#BPMP_EFAULT: Problem reading zone information.
+ * mrq_response::err for this sub-command is defined as:
+ *
+ * | Value | Description |
+ * | --------------- | -------------------------------------- |
+ * | 0 | Valid zone information returned. |
+ * | -#BPMP_EINVAL | Invalid request parameters. |
+ * | -#BPMP_ENOENT | No driver registered for thermal zone. |
+ * | -#BPMP_ERANGE | Thermal trip is invalid or disabled. |
+ * | -#BPMP_EFAULT | Problem reading zone information. |
*/
CMD_THERMAL_GET_THERMTRIP = 4,
- /** @brief: number of supported host-to-bpmp commands. May
- * increase in future
+ /**
+ * @brief Number of supported host-to-bpmp commands.
*/
CMD_THERMAL_HOST_TO_BPMP_NUM
};
+/**
+ * @brief Sub-command identifiers for BPMP->host #MRQ_THERMAL -command
+ */
enum mrq_thermal_bpmp_to_host_cmd {
/**
* @brief Indication that the temperature for a zone has
- * exceeded the range indicated in the thermal trip point
- * for the zone.
+ * exceeded the range indicated in the thermal trip point
+ * for the zone.
*
- * BPMP needs to supply request parameters. Host only needs to
+ * BPMP-FW needs to supply request parameters. Host only needs to
* acknowledge.
*/
CMD_THERMAL_HOST_TRIP_REACHED = 100,
- /** @brief: number of supported bpmp-to-host commands. May
- * increase in future
+ /**
+ * @brief: Number of supported bpmp-to-host commands. May
+ * increase in future.
*/
CMD_THERMAL_BPMP_TO_HOST_NUM
};
-/*
- * Host->BPMP request data for request type CMD_THERMAL_QUERY_ABI
- *
- * zone: Request type for which to check existence.
+/**
+ * Host->BPMP request payload for the #CMD_THERMAL_QUERY_ABI sub-command
*/
struct cmd_thermal_query_abi_request {
+ /**
+ * Request type for which to check whether supported by BPMP-FW.
+ *
+ * Valid identifiers are available at #mrq_thermal_host_to_bpmp_cmd
+ */
uint32_t type;
} BPMP_ABI_PACKED;
-/*
- * Host->BPMP request data for request type CMD_THERMAL_GET_TEMP
- *
- * zone: Number of thermal zone.
+/**
+ * Host->BPMP request payload for the #CMD_THERMAL_GET_TEMP sub-command
*/
struct cmd_thermal_get_temp_request {
+ /** Thermal zone identifier from @ref bpmp_thermal_ids. */
uint32_t zone;
} BPMP_ABI_PACKED;
-/*
- * BPMP->Host reply data for request CMD_THERMAL_GET_TEMP
+/**
+ * BPMP->Host response payload for the #CMD_THERMAL_GET_TEMP sub-command.
*
- * error: 0 if request succeeded.
- * -BPMP_EINVAL if request parameters were invalid.
- * -BPMP_ENOENT if no driver was registered for the specified thermal zone.
- * -BPMP_EFAULT for other thermal zone driver errors.
- * temp: Current temperature in millicelsius.
+ * mrq_response::err is defined as:
+ *
+ * | Value | Description |
+ * | ------------- | -------------------------------------------------------- |
+ * | 0 | Request succeeded. |
+ * | -#BPMP_EINVAL | Request parameters were invalid. |
+ * | -#BPMP_ENOENT | No driver was registered for the specified thermal zone. |
+ * | -#BPMP_EFAULT | For other BPMP-FW internal thermal zone driver errors. |
*/
struct cmd_thermal_get_temp_response {
+ /** @brief Current temperature in millicelsius. */
int32_t temp;
} BPMP_ABI_PACKED;
-/*
- * Host->BPMP request data for request type CMD_THERMAL_SET_TRIP
+/**
+ * @cond (!bpmp_safe && !bpmp_t264)
*
- * zone: Number of thermal zone.
- * low: Temperature of lower trip point in millicelsius
- * high: Temperature of upper trip point in millicelsius
- * enabled: 1 to enable trip point, 0 to disable trip point
+ * Host->BPMP request payload for the #CMD_THERMAL_SET_TRIP sub-command.
*/
struct cmd_thermal_set_trip_request {
+ /** @brief Thermal zone identifier from @ref bpmp_thermal_ids. */
uint32_t zone;
+ /** @brief Temperature of lower trip point in millicelsius */
int32_t low;
+ /** @brief Temperature of upper trip point in millicelsius */
int32_t high;
+ /** 1 to enable trip point, 0 to disable trip point */
uint32_t enabled;
} BPMP_ABI_PACKED;
-/*
- * BPMP->Host request data for request type CMD_THERMAL_HOST_TRIP_REACHED
- *
- * zone: Number of thermal zone where trip point was reached.
+/**
+ * BPMP->Host request payload for the #CMD_THERMAL_HOST_TRIP_REACHED sub-command.
*/
struct cmd_thermal_host_trip_reached_request {
+ /**
+ * @brief ID of the thermal zone where trip point was reached,
+ * from @ref bpmp_thermal_ids.
+ */
uint32_t zone;
} BPMP_ABI_PACKED;
+/** @endcond */
-/*
- * BPMP->Host reply data for request type CMD_THERMAL_GET_NUM_ZONES
- *
- * num: Number of supported thermal zones. The thermal zones are indexed
- * starting from zero.
+/**
+ * BPMP->Host response payload for the #CMD_THERMAL_GET_NUM_ZONES sub-command.
*/
struct cmd_thermal_get_num_zones_response {
+ /**
+ * @brief Number of supported thermal zones.
+ *
+ * The thermal zones are indexed starting from zero.
+ */
uint32_t num;
} BPMP_ABI_PACKED;
-/*
- * Host->BPMP request data for request type CMD_THERMAL_GET_THERMTRIP
- *
- * zone: Number of thermal zone.
+/**
+ * Host->BPMP request payload for the #CMD_THERMAL_GET_THERMTRIP sub-command.
*/
struct cmd_thermal_get_thermtrip_request {
+ /** @brief Thermal zone identifier from @ref bpmp_thermal_ids. */
uint32_t zone;
} BPMP_ABI_PACKED;
-/*
- * BPMP->Host reply data for request CMD_THERMAL_GET_THERMTRIP
- *
- * thermtrip: HW shutdown temperature in millicelsius.
+/**
+ * BPMP->Host response payload for the #CMD_THERMAL_GET_THERMTRIP sub-command.
*/
struct cmd_thermal_get_thermtrip_response {
+ /** @brief HW shutdown temperature in millicelsius. */
int32_t thermtrip;
} BPMP_ABI_PACKED;
-/*
- * Host->BPMP request data.
- *
- * Reply type is union mrq_thermal_bpmp_to_host_response.
+/**
+ * Host->BPMP #MRQ_THERMAL request payload.
*
- * type: Type of request. Values listed in enum mrq_thermal_type.
- * data: Request type specific parameters.
+ * Response payload type is #mrq_thermal_bpmp_to_host_response.
*/
struct mrq_thermal_host_to_bpmp_request {
+ /**
+ * Request sub-command identifier from @ref mrq_thermal_host_to_bpmp_cmd.
+ */
uint32_t type;
+
union {
struct cmd_thermal_query_abi_request query_abi;
struct cmd_thermal_get_temp_request get_temp;
@@ -1876,21 +2367,22 @@ struct mrq_thermal_host_to_bpmp_request {
} BPMP_UNION_ANON;
} BPMP_ABI_PACKED;
-/*
- * BPMP->Host request data.
- *
- * type: Type of request. Values listed in enum mrq_thermal_type.
- * data: Request type specific parameters.
+/**
+ * @brief Request payload for the BPMP->Host #MRQ_THERMAL command.
*/
struct mrq_thermal_bpmp_to_host_request {
+ /**
+ * Request sub-command identifier from @ref mrq_thermal_bpmp_to_host_cmd.
+ */
uint32_t type;
+
union {
struct cmd_thermal_host_trip_reached_request host_trip_reached;
} BPMP_UNION_ANON;
} BPMP_ABI_PACKED;
-/*
- * Data in reply to a Host->BPMP request.
+/**
+ * @brief Response payload for the Host->BPMP #MRQ_THERMAL command.
*/
union mrq_thermal_bpmp_to_host_response {
struct cmd_thermal_get_temp_response get_temp;
@@ -1900,13 +2392,11 @@ union mrq_thermal_bpmp_to_host_response {
/** @} Thermal */
-/**
+/** @cond (!bpmp_safe && (bpmp_t234 || bpmp_t238 || bpmp_t264))
* @ingroup MRQ_Codes
* @def MRQ_OC_STATUS
- * @brief Query over current status
+ * @brief Query overcurrent status
*
- * * Platforms: T234
- * @cond bpmp_t234
* * Initiators: CCPLEX
* * Targets: BPMP
* * Request Payload: N/A
@@ -1916,33 +2406,224 @@ union mrq_thermal_bpmp_to_host_response {
* @{
*/
+/**
+ * @brief Size of the mrq_oc_status_response::throt_en and
+ * mrq_oc_status_response::event_cnt -arrays.
+ */
#define OC_STATUS_MAX_SIZE 24U
-/*
- * @brief Response to #MRQ_OC_STATUS
- *
- * throt_en: Value for each OC alarm where zero signifies throttle is
- * disabled, and non-zero throttle is enabled.
- * event_cnt: Total number of OC events for each OC alarm.
+/**
+ * @brief Response payload for the #MRQ_OC_STATUS -command.
*
* mrq_response::err is 0 if the operation was successful and
* -#BPMP_ENODEV otherwise.
*/
struct mrq_oc_status_response {
+ /**
+ * @brief Value for each overcurrent alarm where zero signifies
+ * throttle is disabled, and non-zero throttle is enabled.
+ */
uint8_t throt_en[OC_STATUS_MAX_SIZE];
+
+ /**
+ * @brief Total number of overcurrent events for each overcurrent alarm.
+ */
uint32_t event_cnt[OC_STATUS_MAX_SIZE];
} BPMP_ABI_PACKED;
/** @} OC_status */
-/** @endcond bpmp_t234 */
+/** @endcond */
+
+/** @cond (bpmp_th500 || bpmp_tb500 || bpmp_t238)
+ * @ingroup MRQ_Codes
+ * @def MRQ_THROTTLE
+ * @brief Overcurrent throttling
+ *
+ * * Initiators: CCPLEX
+ * * Targets: BPMP
+ * * Request Payload: @ref mrq_throttle_request
+ * * Response Payload: @ref mrq_throttle_response
+ * @addtogroup Throttle
+ * @{
+ */
+enum mrq_throttle_cmd {
+ /**
+ * @brief Check whether the BPMP-FW supports the specified
+ * #MRQ_THROTTLE sub-command.
+ *
+ * mrq_response::err is 0 if the specified request is
+ * supported and -#BPMP_ENODEV otherwise.
+ */
+ CMD_THROTTLE_QUERY_ABI = 0,
+
+ /**
+ * @cond (bpmp_th500 || bpmp_tb500)
+ * @brief query chipthrot status
+ *
+ * mrq_response:err is defined as:
+ *
+ * | Value | Description |
+ * |----------------|--------------------------------------------------------------|
+ * | 0 | Success |
+ * | -#BPMP_ENODEV | CMD_THROTTLE_GET_CHIPTHROT_STATUS is not supported by BPMP-FW|
+ */
+ CMD_THROTTLE_GET_CHIPTHROT_STATUS = 1,
+ /** @endcond */
+
+ /**
+ * @cond bpmp_t238
+ * @brief program OC throttle configuration
+ *
+ * mrq_response:err is defined as:
+ *
+ * | Value | Description |
+ * |----------------|--------------------------------------------------------------|
+ * | 0 | Success |
+ * | -#BPMP_EINVAL | ID out of range or alarm for this ID not enabled at boot |
+ * | -#BPMP_ENODEV | CMD_THROTTLE_SET_OC_CONFIG is not supported by BPMP-FW |
+ */
+ CMD_THROTTLE_SET_OC_CONFIG = 2,
+ /** @endcond */
+};
/**
+ * @brief Request payload for #MRQ_THROTTLE sub-command #CMD_THROTTLE_QUERY_ABI
+ */
+struct cmd_throttle_query_abi_request {
+ uint32_t cmd; /**< @ref mrq_throttle_cmd */
+} BPMP_ABI_PACKED;
+
+/**
+ * @cond bpmp_th500
+ * @brief Response payload for #MRQ_THROTTLE sub-command
+ * #CMD_THROTTLE_GET_CHIPTHROT_STATUS
+ *
+ * Bit-mask of all h/w throttling actions that have been engaged since
+ * last invocation of this command
+ * Bit 0...11 : HW throttling status of the thermal zones.
+ * Bit 12...23 : Reserved for future thermal zone events.
+ * Bit 24...25 : HW throttling status of the Over current Alarms OC1 & OC2.
+ * Bit 26...31 : Reserved for future Over current alarm events.
+ * Bit 32...63 : Reserved for future use.
+ * @endcond
+ * @cond bpmp_tb500
+ * @brief Response payload for #MRQ_THROTTLE sub-command
+ * #CMD_THROTTLE_GET_CHIPTHROT_STATUS
+ *
+ * Bit-mask of all h/w throttling actions that have been engaged since
+ * last invocation of this command
+ * Bit 0 : HW throttling status of the TB500C_TJ_MAX thermal zone.
+ * Bit 1...63 : Reserved for future use.
+ * @endcond
+ * @cond (bpmp_th500 || bpmp_tb500)
+ */
+struct cmd_throttle_get_chipthrot_status_response {
+ uint64_t status;
+} BPMP_ABI_PACKED;
+/** @endcond */
+
+/**
+ * @cond bpmp_t238
+ * @brief Request payload for #MRQ_THROTTLE sub-command
+ * #CMD_THROTTLE_SET_OC_CONFIG
+ *
+ * Only alarms that have been configured as enabled in BPMP-DTB at boot can
+ * be reconfigured with this MRQ.
+ */
+struct cmd_throttle_set_oc_config_request {
+ /** @brief valid OC alarm ID from @ref bpmp_soctherm_edp_oc_ids */
+ uint32_t id;
+ /** @brief Throttling enable/disable
+ *
+ * Set to 1 to enable throttling, or 0 to disable. Other values are
+ * disallowed.
+ */
+ uint8_t en_throttle;
+} BPMP_ABI_PACKED;
+/** @endcond */
+
+/**
+ * @brief Request payload for the #MRQ_THROTTLE -command
+ *
+ * | Sub-command | Request payload |
+ * |------------------------------------|----------------------------------|
+ * | #CMD_THROTTLE_QUERY_ABI | #cmd_throttle_query_abi_request |
+ *
+ * @cond bpmp_th500
+ * The following additional sub-commands are supported on TH500 platforms:
+ * | Sub-command | Request payload |
+ * |------------------------------------|----------------------------------|
+ * | #CMD_THROTTLE_GET_CHIPTHROT_STATUS | - |
+ * @endcond
+ *
+ * @cond bpmp_tb500
+ * The following additional sub-commands are supported on TB500 platforms:
+ * | Sub-command | Request payload |
+ * |------------------------------------|----------------------------------|
+ * | #CMD_THROTTLE_GET_CHIPTHROT_STATUS | - |
+ * @endcond
+ *
+ * @cond bpmp_t238
+ * The following additional sub-commands are supported on T238 platforms:
+ * | Sub-command | Request payload |
+ * |------------------------------------|-------------------------------------|
+ * | #CMD_THROTTLE_SET_OC_CONFIG | #cmd_throttle_set_oc_config_request |
+ * @endcond
+ */
+struct mrq_throttle_request {
+ uint32_t cmd;
+ union {
+ struct cmd_throttle_query_abi_request throttle_query_abi_req;
+ /** @cond bpmp_t238 */
+ struct cmd_throttle_set_oc_config_request throttle_set_oc_config_req;
+ /** @endcond */
+ } BPMP_UNION_ANON;
+} BPMP_ABI_PACKED;
+
+/**
+ * @brief Response payload for the #MRQ_THROTTLE -command.
+ *
+ * | Sub-command | Response payload |
+ * |------------------------------------|--------------------------------------------|
+ * | #CMD_THROTTLE_QUERY_ABI | - |
+ *
+ * @cond bpmp_th500
+ * The following additional sub-commands are supported on TH500 platforms:
+ * | Sub-command | Response payload |
+ * |------------------------------------|--------------------------------------------|
+ * | #CMD_THROTTLE_GET_CHIPTHROT_STATUS | #cmd_throttle_get_chipthrot_status_response|
+ * @endcond
+ *
+ * @cond bpmp_tb500
+ * The following additional sub-commands are supported on TB500 platforms:
+ * | Sub-command | Response payload |
+ * |------------------------------------|--------------------------------------------|
+ * | #CMD_THROTTLE_GET_CHIPTHROT_STATUS | #cmd_throttle_get_chipthrot_status_response|
+ * @endcond
+ *
+ * @cond bpmp_t238
+ * The following additional sub-commands are supported on T238 platforms:
+ * | Sub-command | Response payload |
+ * |------------------------------------|--------------------------------------------|
+ * | #CMD_THROTTLE_SET_OC_CONFIG | - |
+ * @endcond
+ */
+struct mrq_throttle_response {
+ union {
+ /** @cond (bpmp_th500 || bpmp_tb500) */
+ struct cmd_throttle_get_chipthrot_status_response throttle_get_chipthrot_status_resp;
+ /** @endcond */
+ } BPMP_UNION_ANON;
+} BPMP_ABI_PACKED;
+/** @} Throttle */
+/** @endcond */
+
+
+/** @cond bpmp_t186
* @ingroup MRQ_Codes
* @def MRQ_CPU_VHINT
* @brief Query CPU voltage hint data
*
- * * Platforms: T186
- * @cond bpmp_t186
* * Initiators: CCPLEX
* * Targets: BPMP
* * Request Payload: @ref mrq_cpu_vhint_request
@@ -1995,14 +2676,13 @@ struct cpu_vhint_data {
} BPMP_ABI_PACKED;
/** @} Vhint */
-/** @endcond bpmp_t186 */
+/** @endcond */
/**
* @ingroup MRQ_Codes
* @def MRQ_ABI_RATCHET
* @brief ABI ratchet value query
*
- * * Platforms: T186, T194
* * Initiators: Any
* * Targets: BPMP
* * Request Payload: @ref mrq_abi_ratchet_request
@@ -2014,7 +2694,7 @@ struct cpu_vhint_data {
/**
* @brief An ABI compatibility mechanism
*
- * BPMP_ABI_RATCHET_VALUE may increase for various reasons in a future
+ * #BPMP_ABI_RATCHET_VALUE may increase for various reasons in a future
* revision of this header file.
* 1. That future revision deprecates some MRQ
* 2. That future revision introduces a breaking change to an existing
@@ -2051,11 +2731,11 @@ struct mrq_abi_ratchet_request {
*
* If #ratchet is less than the requester's #BPMP_ABI_RATCHET_VALUE,
* the requster must either interoperate with BPMP according to an ABI
- * header version with BPMP_ABI_RATCHET_VALUE = ratchet or cease
+ * header version with #BPMP_ABI_RATCHET_VALUE = ratchet or cease
* communication with BPMP.
*
* If mrq_response::err is 0 and ratchet is greater than or equal to the
- * requester's BPMP_ABI_RATCHET_VALUE, the requester should continue
+ * requester's #BPMP_ABI_RATCHET_VALUE, the requester should continue
* normal operation.
*/
struct mrq_abi_ratchet_response {
@@ -2070,7 +2750,9 @@ struct mrq_abi_ratchet_response {
* @def MRQ_EMC_DVFS_LATENCY
* @brief Query frequency dependent EMC DVFS latency
*
- * * Platforms: T186, T194, T234
+ * On T264 and onwards, this MRQ service is available only when
+ * BPMP-FW has valid DRAM timing table passed by earlier boot stages.
+ *
* * Initiators: CCPLEX
* * Targets: BPMP
* * Request Payload: N/A
@@ -2094,7 +2776,11 @@ struct emc_dvfs_latency {
* @brief Response to #MRQ_EMC_DVFS_LATENCY
*/
struct mrq_emc_dvfs_latency_response {
- /** @brief The number valid entries in #pairs */
+ /**
+ * @brief The number valid entries in #pairs
+ *
+ * Valid range is [0, #EMC_DVFS_LATENCY_MAX_SIZE]
+ */
uint32_t num_pairs;
/** @brief EMC DVFS node <frequency, latency> information */
struct emc_dvfs_latency pairs[EMC_DVFS_LATENCY_MAX_SIZE];
@@ -2102,13 +2788,11 @@ struct mrq_emc_dvfs_latency_response {
/** @} EMC */
-/**
+/** @cond (bpmp_t234)
* @ingroup MRQ_Codes
* @def MRQ_EMC_DVFS_EMCHUB
* @brief Query EMC HUB frequencies
*
- * * Platforms: T234 onwards
- * @cond (bpmp_t234 || bpmp_t238 || bpmp_th500)
* * Initiators: CCPLEX
* * Targets: BPMP
* * Request Payload: N/A
@@ -2139,15 +2823,13 @@ struct mrq_emc_dvfs_emchub_response {
} BPMP_ABI_PACKED;
/** @} EMC */
-/** @endcond (bpmp_t234 || bpmp_t238 || bpmp_th500) */
+/** @endcond */
-/**
+/** @cond (bpmp_t234)
* @ingroup MRQ_Codes
* @def MRQ_EMC_DISP_RFL
* @brief Set EMC display RFL handshake mode of operations
*
- * * Platforms: T234 onwards
- * @cond (bpmp_t234 || bpmp_t238 || bpmp_th500)
* * Initiators: CCPLEX
* * Targets: BPMP
* * Request Payload: @ref mrq_emc_disp_rfl_request
@@ -2157,6 +2839,9 @@ struct mrq_emc_dvfs_emchub_response {
* @{
*/
+/**
+ * @brief Allowed mode values for the mrq_emc_disp_rfl_request::mode -field.
+ */
enum mrq_emc_disp_rfl_mode {
/** @brief EMC display RFL handshake disabled */
EMC_DISP_RFL_MODE_DISABLED = 0,
@@ -2171,65 +2856,75 @@ enum mrq_emc_disp_rfl_mode {
* Used by the sender of an #MRQ_EMC_DISP_RFL message to
* request the mode of EMC display RFL handshake.
*
- * mrq_response::err is
- * * 0: RFL mode is set successfully
- * * -#BPMP_EINVAL: invalid mode requested
- * * -#BPMP_ENOSYS: RFL handshake is not supported
- * * -#BPMP_EACCES: Permission denied
- * * -#BPMP_ENODEV: if disp rfl mrq is not supported by BPMP-FW
+ * mrq_response::err for this request is defined as:
+ *
+ * | Value | Description |
+ * | -------------- | --------------------------------------------- |
+ * | 0 | RFL mode is set successfully. |
+ * | -#BPMP_EINVAL | Invalid mode requested. |
+ * | -#BPMP_ENOSYS | RFL handshake is not supported. |
+ * | -#BPMP_EACCES | Permission denied. |
+ * | -#BPMP_ENODEV | if disp rfl mrq is not supported by BPMP-FW. |
*/
struct mrq_emc_disp_rfl_request {
- /** @brief EMC display RFL mode (@ref mrq_emc_disp_rfl_mode) */
+ /** @brief EMC display RFL mode from @ref mrq_emc_disp_rfl_mode */
uint32_t mode;
} BPMP_ABI_PACKED;
/** @} EMC */
-/** @endcond (bpmp_t234 || bpmp_t238 || bpmp_th500) */
+/** @endcond */
-/**
+/** @cond (!bpmp_safe && (bpmp_t234 || bpmp_t238))
* @ingroup MRQ_Codes
* @def MRQ_BWMGR
- * @brief bwmgr requests
+ * @brief Bandwidth manager (BWMGR) commands
*
- * * Platforms: T234 onwards
- * @cond (bpmp_t234 || bpmp_t238 || bpmp_th500)
* * Initiators: CCPLEX
* * Targets: BPMP
* * Request Payload: @ref mrq_bwmgr_request
* * Response Payload: @ref mrq_bwmgr_response
*
* @addtogroup BWMGR
- *
* @{
*/
+/**
+ * @brief Sub-command identifiers for #MRQ_BWMGR
+ */
enum mrq_bwmgr_cmd {
/**
- * @brief Check whether the BPMP driver supports the specified
- * request type
+ * @brief Check whether BPMP-FW supports the specified
+ * #MRQ_BWMGR sub-command.
*
- * mrq_response::err is 0 if the specified request is
- * supported and -#BPMP_ENODEV otherwise.
+ * mrq_response::err is defined to be:
+ *
+ * | Value | Description
+ * |----------------|----------------------------
+ * | 0 | Specified sub-command is supported.
+ * | -#BPMP_ENODEV | Specified sub-command is not supported.
*/
CMD_BWMGR_QUERY_ABI = 0,
/**
- * @brief Determine dram rate to satisfy iso/niso bw requests
+ * @brief Determine DRAM rate to satisfy ISO/NISO bandwidth requests
*
- * mrq_response::err is
- * * 0: calc_rate succeeded.
- * * -#BPMP_EINVAL: Invalid request parameters.
- * * -#BPMP_ENOTSUP: Requested bw is not available.
+ * mrq_response::err is defined to be:
+ *
+ * | Value | Description
+ * |----------------|----------------------------
+ * | 0 | Rate calculation succeeded.
+ * | -#BPMP_EINVAL | Invalid request parameters.
+ * | -#BPMP_ENOTSUP | Requested bandwidth is not available.
+ * | <0 | Any other internal error.
*/
CMD_BWMGR_CALC_RATE = 1
};
-/*
- * request data for request type CMD_BWMGR_QUERY_ABI
- *
- * type: Request type for which to check existence.
+/**
+ * @brief Request payload for #MRQ_BWMGR sub-command #CMD_BWMGR_QUERY_ABI
*/
struct cmd_bwmgr_query_abi_request {
+ /** @brief Sub-command identifier from @ref mrq_bwmgr_cmd. */
uint32_t type;
} BPMP_ABI_PACKED;
@@ -2237,47 +2932,56 @@ struct cmd_bwmgr_query_abi_request {
* @brief Used by @ref cmd_bwmgr_calc_rate_request
*/
struct iso_req {
- /* @brief bwmgr client ID @ref bpmp_bwmgr_ids */
+ /** @brief BWMGR client ID from @ref bpmp_bwmgr_ids */
uint32_t id;
- /* @brief bw in kBps requested by client */
+ /** @brief Bandwidth in kBps requested by client */
uint32_t iso_bw;
} BPMP_ABI_PACKED;
+/**
+ * @brief Size of the cmd_bwmgr_calc_rate_request::isobw_reqs -array.
+ */
#define MAX_ISO_CLIENTS 13U
-/*
- * request data for request type CMD_BWMGR_CALC_RATE
+
+/**
+ * @brief Request payload for #MRQ_BWMGR sub-command #CMD_BWMGR_CALC_RATE
*/
struct cmd_bwmgr_calc_rate_request {
- /* @brief total bw in kBps requested by all niso clients */
+ /** @brief Total bandwidth in kBps requested by all NISO clients. */
uint32_t sum_niso_bw;
- /* @brief The number of iso clients */
+ /** @brief The number of ISO client requests in #isobw_reqs -array */
uint32_t num_iso_clients;
- /* @brief iso_req <id, iso_bw> information */
+ /** @brief iso_req <id, iso_bw> information */
struct iso_req isobw_reqs[MAX_ISO_CLIENTS];
} BPMP_ABI_PACKED;
-/*
- * response data for request type CMD_BWMGR_CALC_RATE
- *
- * iso_rate_min: min dram data clk rate in kHz to satisfy all iso bw reqs
- * total_rate_min: min dram data clk rate in kHz to satisfy all bw reqs
+/**
+ * @brief Response payload for #MRQ_BWMGR sub-command #CMD_BWMGR_CALC_RATE
*/
struct cmd_bwmgr_calc_rate_response {
+ /**
+ * @brief Minimum DRAM data clock rate in kHz to satisfy all ISO client
+ * bandwidth requests.
+ */
uint32_t iso_rate_min;
+
+ /**
+ * @brief Minimum DRAM data clock rate in kHz to satisfy all
+ * bandwidth requests.
+ */
uint32_t total_rate_min;
} BPMP_ABI_PACKED;
-/*
- * @brief Request with #MRQ_BWMGR
- *
- *
- * |sub-command |payload |
- * |----------------------------|------------------------------|
- * |CMD_BWMGR_QUERY_ABI | cmd_bwmgr_query_abi_request |
- * |CMD_BWMGR_CALC_RATE | cmd_bwmgr_calc_rate_request |
+/**
+ * @brief Request payload for the #MRQ_BWMGR -command.
*
+ * |Sub-command |Payload |
+ * |----------------------|-----------------------------|
+ * |#CMD_BWMGR_QUERY_ABI |#cmd_bwmgr_query_abi_request |
+ * |#CMD_BWMGR_CALC_RATE |#cmd_bwmgr_calc_rate_request |
*/
struct mrq_bwmgr_request {
+ /** @brief Sub-command identifier from @ref mrq_bwmgr_cmd. */
uint32_t cmd;
union {
struct cmd_bwmgr_query_abi_request query_abi;
@@ -2285,12 +2989,12 @@ struct mrq_bwmgr_request {
} BPMP_UNION_ANON;
} BPMP_ABI_PACKED;
-/*
- * @brief Response to MRQ_BWMGR
+/**
+ * @brief Response payload for the #MRQ_BWMGR -command.
*
- * |sub-command |payload |
- * |----------------------------|------------------------------|
- * |CMD_BWMGR_CALC_RATE | cmd_bwmgr_calc_rate_response |
+ * |Sub-command |Payload |
+ * |----------------------|------------------------------|
+ * |#CMD_BWMGR_CALC_RATE |#cmd_bwmgr_calc_rate_response |
*/
struct mrq_bwmgr_response {
union {
@@ -2299,15 +3003,13 @@ struct mrq_bwmgr_response {
} BPMP_ABI_PACKED;
/** @} BWMGR */
-/** @endcond (bpmp_t234 || bpmp_t238 || bpmp_th500) */
+/** @endcond */
-/**
+/** @cond (!bpmp_safe && (bpmp_t234 || bpmp_t238 || bpmp_t264))
* @ingroup MRQ_Codes
* @def MRQ_BWMGR_INT
- * @brief bpmp-integrated bwmgr requests
+ * @brief BPMP-FW integrated BWMGR requests
*
- * * Platforms: T234 onwards
- * @cond (bpmp_t234 || bpmp_t238 || bpmp_th500)
* * Initiators: CCPLEX
* * Targets: BPMP
* * Request Payload: @ref mrq_bwmgr_int_request
@@ -2317,10 +3019,13 @@ struct mrq_bwmgr_response {
* @{
*/
+/**
+ * @brief Sub-command identifiers for #MRQ_BWMGR_INT
+ */
enum mrq_bwmgr_int_cmd {
/**
* @brief Check whether the BPMP-FW supports the specified
- * request type
+ * sub-command.
*
* mrq_response::err is 0 if the specified request is
* supported and -#BPMP_ENODEV otherwise.
@@ -2328,36 +3033,64 @@ enum mrq_bwmgr_int_cmd {
CMD_BWMGR_INT_QUERY_ABI = 1,
/**
- * @brief Determine and set dram rate to satisfy iso/niso bw request
+ * @brief Determine and set DRAM rate to satisfy ISO/NISO bandwidth requests.
*
- * mrq_response::err is
- * * 0: request succeeded.
- * * -#BPMP_EINVAL: Invalid request parameters.
- * set_frequency in @ref cmd_bwmgr_int_calc_and_set_response
- * will not be set.
- * * -#BPMP_ENOTSUP: Requested bw is not available.
- * set_frequency in @ref cmd_bwmgr_int_calc_and_set_response
- * will be current dram-clk rate.
+ * mrq_response::err is defined as:
+ *
+ * |Value |Description |
+ * |-----------------|----------------------------------------------------------------------------------------------------------------|
+ * |0 |Request succeeded. |
+ * |-#BPMP_EINVAL |Invalid request parameters, cmd_bwmgr_int_calc_and_set_response::rate is not set. |
+ * |-#BPMP_ENOTSUP |Requested bandwidth is not available, cmd_bwmgr_int_calc_and_set_response::rate is the current DRAM clock rate. |
+ * |<0 |Any other internal error. |
*/
CMD_BWMGR_INT_CALC_AND_SET = 2,
/**
- * @brief Set a max DRAM frequency for the bandwidth-manager
+ * @brief Set a max DRAM frequency for the bandwidth manager.
*
- * mrq_response::err is
- * * 0: request succeeded.
- * * -#BPMP_ENOTSUP: Requested cap frequency is not possible.
+ * mrq_response::err is defined as:
+ *
+ * |Value |Description |
+ * |-----------------|------------------------------------------|
+ * |0 |Request succeeded. |
+ * |-#BPMP_ENOTSUP |Requested cap frequency is not possible. |
+ * |<0 |Any other internal error. |
+ */
+ CMD_BWMGR_INT_CAP_SET = 3,
+
+ /**
+ * @brief Obtain the maximum amount of bandwidth currently allocatable
+ * to the requesting client.
+ *
+ * mrq_response::err is defined as:
+ *
+ * |Value |Description |
+ * |-----------------|------------------------------------------|
+ * |0 |Request succeeded. |
+ * |-#BPMP_EINVAL |Invalid request parameters. |
+ * |<0 |Any other internal error. |
+ */
+ CMD_BWMGR_INT_CURR_AVAILABLE_BW = 4,
+ /**
+ * @brief Get the last request made by the client.
+ *
+ * mrq_response::err is defined as:
+ *
+ * |Value |Description |
+ * |-----------------|------------------------------------------|
+ * |0 |Request succeeded. |
+ * |-#BPMP_EINVAL |Invalid request parameters. |
+ * |<0 |Any other internal error. |
*/
- CMD_BWMGR_INT_CAP_SET = 3
+ CMD_BWMGR_INT_GET_LAST_REQUEST = 5,
};
-/*
- * request structure for request type CMD_BWMGR_QUERY_ABI
- *
- * type: Request type for which to check existence.
+/**
+ * @brief Request payload for #MRQ_BWMGR_INT sub-command #CMD_BWMGR_INT_QUERY_ABI
*/
struct cmd_bwmgr_int_query_abi_request {
- /* @brief request type determined by @ref mrq_bwmgr_int_cmd */
+ /** @brief Sub-command identifier from @ref mrq_bwmgr_int_cmd. */
uint32_t type;
} BPMP_ABI_PACKED;
@@ -2373,87 +3106,168 @@ struct cmd_bwmgr_int_query_abi_request {
/** @} bwmgr_int_unit_type */
-/*
- * request data for request type CMD_BWMGR_INT_CALC_AND_SET
+/**
+ * @brief Request payload for #MRQ_BWMGR_INT sub-command #CMD_BWMGR_INT_CALC_AND_SET
*/
struct cmd_bwmgr_int_calc_and_set_request {
- /* @brief bwmgr client ID @ref bpmp_bwmgr_ids */
+ /** @brief BWGMR client ID from @ref bpmp_bwmgr_ids */
uint32_t client_id;
- /* @brief average niso bw usage in kBps requested by client. */
+ /** @brief Average NISO bandwidth usage in kBps requested by client. */
uint32_t niso_bw;
- /*
- * @brief average iso bw usage in kBps requested by client.
- * Value is ignored if client is niso. Determined by client_id.
+ /**
+ * @brief Average ISO bandwidth usage in kBps requested by client.
+ *
+ * Value is ignored if client is NISO as determined by #client_id.
*/
uint32_t iso_bw;
- /*
- * @brief memory clock floor requested by client.
- * Unit determined by floor_unit.
+ /**
+ * @brief Memory clock floor requested by client, unit of the value
+ * is determined by #floor_unit -field.
*/
uint32_t mc_floor;
- /*
- * @brief toggle to determine the unit-type of floor value.
- * See @ref bwmgr_int_unit_type definitions for unit-type mappings.
+ /**
+ * @brief Value set to determine the unit of the #mc_floor value:
+ *
+ * | Value | Unit |
+ * |-----------------------|----------------------|
+ * | #BWMGR_INT_UNIT_KBPS | Kilobytes per second |
+ * | #BWMGR_INT_UNIT_KHZ | Kilohertz |
*/
uint8_t floor_unit;
} BPMP_ABI_PACKED;
-struct cmd_bwmgr_int_cap_set_request {
- /* @brief requested cap frequency in Hz. */
+/**
+ * @brief Response payload for #MRQ_BWMGR_INT sub-command #CMD_BWMGR_INT_CALC_AND_SET
+ */
+struct cmd_bwmgr_int_calc_and_set_response {
+ /** @brief Currently set memory clock frequency in Hz */
uint64_t rate;
} BPMP_ABI_PACKED;
-/*
- * response data for request type CMD_BWMGR_CALC_AND_SET
+/**
+ * @brief Request payload for #MRQ_BWMGR_INT sub-command #CMD_BWMGR_INT_CAP_SET
*/
-struct cmd_bwmgr_int_calc_and_set_response {
- /* @brief current set memory clock frequency in Hz */
+struct cmd_bwmgr_int_cap_set_request {
+ /** @brief Requested cap frequency in Hz. */
uint64_t rate;
} BPMP_ABI_PACKED;
-/*
- * @brief Request with #MRQ_BWMGR_INT
+/**
+ * @brief Request payload for #MRQ_BWMGR_INT sub-command #CMD_BWMGR_INT_CURR_AVAILABLE_BW
+ */
+struct cmd_bwmgr_int_curr_available_bw_request {
+ /** @brief BWMGR client ID from @ref bpmp_bwmgr_ids */
+ uint32_t id;
+} BPMP_ABI_PACKED;
+
+/**
+ * @brief Response payload for #MRQ_BWMGR_INT sub-command #CMD_BWMGR_INT_CURR_AVAILABLE_BW
+ */
+struct cmd_bwmgr_int_curr_available_bw_response {
+ /** @brief Current cap frequency in KHz. */
+ uint64_t cap_rate;
+ /** @brief Currently available bandwidth for the requesting client
+ * to allocate in KBps.
+ */
+ uint64_t available_bw;
+} BPMP_ABI_PACKED;
+
+struct cmd_bwmgr_int_get_last_request_request {
+ /** @brief BWMGR client ID from @ref bpmp_bwmgr_ids */
+ uint32_t id;
+ /**
+ * @brief Value set to determine the unit of the returned mc_floor value:
+ *
+ * | Value | Unit |
+ * |-----------------------|----------------------|
+ * | #BWMGR_INT_UNIT_KBPS | Kilobytes per second |
+ * | #BWMGR_INT_UNIT_KHZ | Kilohertz |
+ */
+ uint8_t floor_unit;
+} BPMP_ABI_PACKED;
+
+struct cmd_bwmgr_int_get_last_request_response {
+ /** @brief BWGMR client ID from @ref bpmp_bwmgr_ids */
+ uint32_t client_id;
+ /** @brief Average NISO bandwidth usage in kBps requested by client. */
+ uint32_t niso_bw;
+ /**
+ * @brief Average ISO bandwidth usage in kBps requested by client.
+ */
+ uint32_t iso_bw;
+ /**
+ * @brief Memory clock floor requested by client, unit of the value
+ * is determined by #floor_unit -field.
+ */
+ uint32_t mc_floor;
+ /**
+ * @brief Value set to determine the unit of the #mc_floor value:
+ *
+ * | Value | Unit |
+ * |-----------------------|----------------------|
+ * | #BWMGR_INT_UNIT_KBPS | Kilobytes per second |
+ * | #BWMGR_INT_UNIT_KHZ | Kilohertz |
+ */
+ uint8_t floor_unit;
+} BPMP_ABI_PACKED;
+
+/**
+ * @brief Request payload for the #MRQ_BWMGR_INT -command.
*
+ * |Sub-command |Payload |
+ * |---------------------------------|-----------------------------------------|
+ * |#CMD_BWMGR_INT_QUERY_ABI |#cmd_bwmgr_int_query_abi_request |
+ * |#CMD_BWMGR_INT_CALC_AND_SET |#cmd_bwmgr_int_calc_and_set_request |
+ * |#CMD_BWMGR_INT_CAP_SET |#cmd_bwmgr_int_cap_set_request |
+ * |#CMD_BWMGR_INT_GET_LAST_REQUEST |#cmd_bwmgr_int_get_last_request_request |
*
- * |sub-command |payload |
- * |----------------------------|-----------------------------------|
- * |CMD_BWMGR_INT_QUERY_ABI | cmd_bwmgr_int_query_abi_request |
- * |CMD_BWMGR_INT_CALC_AND_SET | cmd_bwmgr_int_calc_and_set_request|
- * |CMD_BWMGR_INT_CAP_SET | cmd_bwmgr_int_cap_set_request |
+ * The following additional sub-commands are supported on T264 platforms:
*
+ * |Sub-command |Payload |
+ * |---------------------------------|-----------------------------------------|
+ * |#CMD_BWMGR_INT_CURR_AVAILABLE_BW |#cmd_bwmgr_int_curr_available_bw_request |
*/
struct mrq_bwmgr_int_request {
+ /** @brief Sub-command identifier from @ref mrq_bwmgr_int_cmd. */
uint32_t cmd;
union {
struct cmd_bwmgr_int_query_abi_request query_abi;
struct cmd_bwmgr_int_calc_and_set_request bwmgr_calc_set_req;
struct cmd_bwmgr_int_cap_set_request bwmgr_cap_set_req;
+ struct cmd_bwmgr_int_curr_available_bw_request bwmgr_curr_available_bw_req;
+ struct cmd_bwmgr_int_get_last_request_request bwmgr_get_last_request_req;
} BPMP_UNION_ANON;
} BPMP_ABI_PACKED;
-/*
- * @brief Response to MRQ_BWMGR_INT
+/**
+ * @brief Response payload for the #MRQ_BWMGR_INT -command.
*
- * |sub-command |payload |
- * |----------------------------|---------------------------------------|
- * |CMD_BWMGR_INT_CALC_AND_SET | cmd_bwmgr_int_calc_and_set_response |
+ * |Sub-command |Payload |
+ * |---------------------------------|------------------------------------------|
+ * |#CMD_BWMGR_INT_CALC_AND_SET |#cmd_bwmgr_int_calc_and_set_response |
+ * |#CMD_BWMGR_INT_GET_LAST_REQUEST |#cmd_bwmgr_int_get_last_request_response |
+ *
+ * The following additional sub-commands are supported on T264 platforms:
+ * |Sub-command |Payload |
+ * |---------------------------------|------------------------------------------|
+ * |#CMD_BWMGR_INT_CURR_AVAILABLE_BW |#cmd_bwmgr_int_curr_available_bw_response |
*/
struct mrq_bwmgr_int_response {
union {
struct cmd_bwmgr_int_calc_and_set_response bwmgr_calc_set_resp;
+ struct cmd_bwmgr_int_curr_available_bw_response bwmgr_curr_available_bw_resp;
+ struct cmd_bwmgr_int_get_last_request_response bwmgr_get_last_request_resp;
} BPMP_UNION_ANON;
} BPMP_ABI_PACKED;
/** @} BWMGR_INT */
-/** @endcond (bpmp_t234 || bpmp_t238 || bpmp_th500) */
+/** @endcond */
-/**
+/** @cond (!bpmp_safe && (bpmp_t234 || bpmp_t238 || bpmp_t264))
* @ingroup MRQ_Codes
* @def MRQ_ISO_CLIENT
* @brief ISO client requests
*
- * * Platforms: T234 onwards
- * @cond (bpmp_t234 || bpmp_t238 || bpmp_th500)
* * Initiators: CCPLEX
* * Targets: BPMP
* * Request Payload: @ref mrq_iso_client_request
@@ -2463,148 +3277,178 @@ struct mrq_bwmgr_int_response {
* @{
*/
+/**
+ * @brief Sub-command identifiers for #MRQ_ISO_CLIENT.
+ */
enum mrq_iso_client_cmd {
/**
- * @brief Check whether the BPMP driver supports the specified
- * request type
+ * @brief Check whether BPMP-FW supports a specified
+ * #MRQ_ISO_CLIENT sub-command.
*
* mrq_response::err is 0 if the specified request is
* supported and -#BPMP_ENODEV otherwise.
*/
CMD_ISO_CLIENT_QUERY_ABI = 0,
- /*
- * @brief check for legal LA for the iso client. Without programming
- * LA MC registers, calculate and ensure that legal LA is possible for
- * iso bw requested by the ISO client.
+ /**
+ * @brief Determine legal LA for ISO client.
*
- * mrq_response::err is
- * * 0: check la succeeded.
- * * -#BPMP_EINVAL: Invalid request parameters.
- * * -#BPMP_EFAULT: Legal LA is not possible for client requested iso_bw
+ * Without programming LA MC registers, calculate and ensure that
+ * a legal LA is possible for the ISO bandwidth requested by the
+ * ISO client.
+ *
+ * mrq_response::err for this sub-command is defined as:
+ *
+ * | Value | Description |
+ * |---------------|--------------------------------------------------------------|
+ * | 0 | Request successful and legal LA is possible. |
+ * | -#BPMP_EINVAL | Invalid request parameters. |
+ * | -#BPMP_EFAULT | Legal LA is not possible for client requested ISO bandwidth. |
+ * | <0 | Any other internal error. |
*/
CMD_ISO_CLIENT_CALCULATE_LA = 1,
- /*
- * @brief set LA for the iso client. Calculate and program the LA/PTSA
- * MC registers corresponding to the client making bw request
+ /**
+ * @brief Set LA for ISO client.
*
- * mrq_response::err is
- * * 0: set la succeeded.
- * * -#BPMP_EINVAL: Invalid request parameters.
- * * -#BPMP_EFAULT: Failed to calculate or program MC registers.
+ * Calculate and program the LA/PTSA MC registers corresponding to the
+ * ISO client making the bandwidth request.
+ *
+ * mrq_response::err for this sub-command is defined as:
+ *
+ * | Value | Description |
+ * |---------------|----------------------------------------------|
+ * | 0 | Setting LA succeeded. |
+ * | -#BPMP_EINVAL | Invalid request parameters. |
+ * | -#BPMP_EFAULT | Failed to calculate or program MC registers. |
+ * | <0 | Any other internal error. |
*/
CMD_ISO_CLIENT_SET_LA = 2,
- /*
- * @brief Get max possible bw for iso client
+ /**
+ * @brief Get maximum possible bandwidth for ISO client.
*
- * mrq_response::err is
- * * 0: get_max_bw succeeded.
- * * -#BPMP_EINVAL: Invalid request parameters.
+ * mrq_response::err for this sub-command is defined as:
+ *
+ * | Value | Description |
+ * |---------------|----------------------------------------------|
+ * | 0 | Operation successful. |
+ * | -#BPMP_EINVAL | Invalid request parameters. |
+ * | <0 | Any other internal error. |
*/
CMD_ISO_CLIENT_GET_MAX_BW = 3
};
-/*
- * request data for request type CMD_ISO_CLIENT_QUERY_ABI
- *
- * type: Request type for which to check existence.
+/**
+ * @brief Request payload for #MRQ_ISO_CLIENT sub-command #CMD_ISO_CLIENT_QUERY_ABI
*/
struct cmd_iso_client_query_abi_request {
+ /**
+ * @brief Sub-command identifier from @ref mrq_iso_client_cmd
+ * for which to check existence.
+ */
uint32_t type;
} BPMP_ABI_PACKED;
-/*
- * request data for request type CMD_ISO_CLIENT_CALCULATE_LA
- *
- * id: client ID in @ref bpmp_bwmgr_ids
- * bw: bw requested in kBps by client ID.
- * init_bw_floor: initial dram_bw_floor in kBps passed by client ID.
- * ISO client will perform mempool allocation and DVFS buffering based
- * on this dram_bw_floor.
+/**
+ * @brief Request payload #MRQ_ISO_CLIENT sub-command #CMD_ISO_CLIENT_CALCULATE_LA
*/
struct cmd_iso_client_calculate_la_request {
+ /** @brief BWMGR client ID from @ref bpmp_bwmgr_ids */
uint32_t id;
+ /** @brief Bandwidth requested in kBps for the client specified in #id. */
uint32_t bw;
+ /**
+ * @brief Initial DRAM bandwidth floor in kBps for the ISO client specified in #id.
+ *
+ * ISO client will perform mempool allocation and DVFS buffering based
+ * on this value.
+ */
uint32_t init_bw_floor;
} BPMP_ABI_PACKED;
-/*
- * request data for request type CMD_ISO_CLIENT_SET_LA
- *
- * id: client ID in @ref bpmp_bwmgr_ids
- * bw: bw requested in kBps by client ID.
- * final_bw_floor: final dram_bw_floor in kBps.
- * Sometimes the initial dram_bw_floor passed by ISO client may need to be
- * updated by considering higher dram freq's. This is the final dram_bw_floor
- * used to calculate and program MC registers.
+/**
+ * @brief Response payload for #MRQ_ISO_CLIENT sub-command #CMD_ISO_CLIENT_CALCULATE_LA
+ */
+struct cmd_iso_client_calculate_la_response {
+ /** @brief Minimum DRAM rate in kHz at which a legal LA is possible */
+ uint32_t la_rate_floor;
+ /**
+ * Minimum DRAM frequency in kHz required to satisfy this clients
+ * ISO bandwidth request, assuming all other ISO clients are inactive.
+ */
+ uint32_t iso_client_only_rate;
+} BPMP_ABI_PACKED;
+
+/**
+ * @brief Request payload for #MRQ_ISO_CLIENT sub-command #CMD_ISO_CLIENT_SET_LA
*/
struct cmd_iso_client_set_la_request {
+ /** @brief BMWGR client ID from @ref bpmp_bwmgr_ids */
uint32_t id;
+ /** @brief Bandwidth requested in kBps for the client specified in #id. */
uint32_t bw;
+ /**
+ * @brief Final DRAM bandwidth floor in kBps.
+ *
+ * Sometimes the initial cmd_iso_client_calculate_la_request::dram_bw_floor
+ * passed by ISO client may need to be updated by considering higher
+ * DRAM frequencies. This is the final DRAM bandwidth floor value used
+ * to calculate and program MC registers.
+ */
uint32_t final_bw_floor;
} BPMP_ABI_PACKED;
-/*
- * request data for request type CMD_ISO_CLIENT_GET_MAX_BW
- *
- * id: client ID in @ref bpmp_bwmgr_ids
+/**
+ * @brief Request payload for #MRQ_ISO_CLIENT sub-command #CMD_ISO_CLIENT_GET_MAX_BW
*/
struct cmd_iso_client_get_max_bw_request {
+ /** @brief BWMGR client ID from @ref bpmp_bwmgr_ids */
uint32_t id;
} BPMP_ABI_PACKED;
-/*
- * response data for request type CMD_ISO_CLIENT_CALCULATE_LA
- *
- * la_rate_floor: minimum dram_rate_floor in kHz at which a legal la is possible
- * iso_client_only_rate: Minimum dram freq in kHz required to satisfy this clients
- * iso bw request, assuming all other iso clients are inactive
- */
-struct cmd_iso_client_calculate_la_response {
- uint32_t la_rate_floor;
- uint32_t iso_client_only_rate;
-} BPMP_ABI_PACKED;
-
/**
* @brief Used by @ref cmd_iso_client_get_max_bw_response
*/
struct iso_max_bw {
- /* @brief dram frequency in kHz */
+ /** @brief dram frequency in kHz */
uint32_t freq;
- /* @brief max possible iso-bw in kBps */
+ /** @brief max possible iso-bw in kBps */
uint32_t iso_bw;
} BPMP_ABI_PACKED;
+/**
+ * @brief Size of the cmd_iso_client_get_max_bw_response::pairs -array.
+ */
#define ISO_MAX_BW_MAX_SIZE 14U
-/*
- * response data for request type CMD_ISO_CLIENT_GET_MAX_BW
+
+/**
+ * @brief Response payload for #MRQ_ISO_CLIENT sub-command #CMD_ISO_CLIENT_GET_MAX_BW
*/
struct cmd_iso_client_get_max_bw_response {
- /* @brief The number valid entries in iso_max_bw pairs */
+ /** @brief The number valid entries in iso_max_bw pairs */
uint32_t num_pairs;
- /* @brief max ISOBW <dram freq, max bw> information */
+ /** @brief max ISOBW <dram freq, max bw> information */
struct iso_max_bw pairs[ISO_MAX_BW_MAX_SIZE];
} BPMP_ABI_PACKED;
/**
- * @brief Request with #MRQ_ISO_CLIENT
- *
- * Used by the sender of an #MRQ_ISO_CLIENT message.
+ * @brief Request payload for #MRQ_ISO_CLIENT command.
*
- * |sub-command |payload |
- * |------------------------------------ |----------------------------------------|
- * |CMD_ISO_CLIENT_QUERY_ABI |cmd_iso_client_query_abi_request |
- * |CMD_ISO_CLIENT_CALCULATE_LA |cmd_iso_client_calculate_la_request |
- * |CMD_ISO_CLIENT_SET_LA |cmd_iso_client_set_la_request |
- * |CMD_ISO_CLIENT_GET_MAX_BW |cmd_iso_client_get_max_bw_request |
+ * Each #MRQ_ISO_CLIENT -command is expected to include a sub-command specific
+ * payload as defined in table below:
*
+ * |Sub-command |Request payload |
+ * |-----------------------------|--------------------------------------|
+ * |#CMD_ISO_CLIENT_QUERY_ABI |#cmd_iso_client_query_abi_request |
+ * |#CMD_ISO_CLIENT_CALCULATE_LA |#cmd_iso_client_calculate_la_request |
+ * |#CMD_ISO_CLIENT_SET_LA |#cmd_iso_client_set_la_request |
+ * |#CMD_ISO_CLIENT_GET_MAX_BW |#cmd_iso_client_get_max_bw_request |
*/
-
struct mrq_iso_client_request {
- /* Type of request. Values listed in enum mrq_iso_client_cmd */
+ /** @brief Sub-command identifier from @ref mrq_iso_client_cmd. */
uint32_t cmd;
+
union {
struct cmd_iso_client_query_abi_request query_abi;
struct cmd_iso_client_calculate_la_request calculate_la_req;
@@ -2614,20 +3458,20 @@ struct mrq_iso_client_request {
} BPMP_ABI_PACKED;
/**
- * @brief Response to MRQ_ISO_CLIENT
+ * @brief Response payload for #MRQ_ISO_CLIENT command.
*
- * Each sub-command supported by @ref mrq_iso_client_request may return
- * sub-command-specific data. Some do and some do not as indicated in
- * the following table
+ * Some of the sub-commands supported by #MRQ_ISO_CLIENT may return
+ * a sub-command -specific payload in the MRQ response as defined in table
+ * below:
*
- * |sub-command |payload |
- * |---------------------------- |------------------------------------|
- * |CMD_ISO_CLIENT_CALCULATE_LA |cmd_iso_client_calculate_la_response|
- * |CMD_ISO_CLIENT_SET_LA |N/A |
- * |CMD_ISO_CLIENT_GET_MAX_BW |cmd_iso_client_get_max_bw_response |
+ * |Sub-command |Response payload |
+ * |---------------------------- |--------------------------------------|
+ * |#CMD_ISO_CLIENT_QUERY_ABI |- |
+ * |#CMD_ISO_CLIENT_CALCULATE_LA |#cmd_iso_client_calculate_la_response |
+ * |#CMD_ISO_CLIENT_SET_LA |- |
+ * |#CMD_ISO_CLIENT_GET_MAX_BW |#cmd_iso_client_get_max_bw_response |
*
*/
-
struct mrq_iso_client_response {
union {
struct cmd_iso_client_calculate_la_response calculate_la_resp;
@@ -2636,15 +3480,13 @@ struct mrq_iso_client_response {
} BPMP_ABI_PACKED;
/** @} ISO_CLIENT */
-/** @endcond (bpmp_t234 || bpmp_t238 || bpmp_th500) */
+/** @endcond */
-/**
+/** @cond (!bpmp_t186)
* @ingroup MRQ_Codes
* @def MRQ_CPU_NDIV_LIMITS
- * @brief CPU freq. limits in ndiv
+ * @brief Return CPU cluster NDIV limits
*
- * * Platforms: T194 onwards
- * @cond (bpmp_t194 || bpmp_t234 || bpmp_t238 || bpmp_th500)
* * Initiators: CCPLEX
* * Targets: BPMP
* * Request Payload: @ref mrq_cpu_ndiv_limits_request
@@ -2654,10 +3496,10 @@ struct mrq_iso_client_response {
*/
/**
- * @brief Request for ndiv limits of a cluster
+ * @brief Request payload for the #MRQ_CPU_NDIV_LIMITS -command
*/
struct mrq_cpu_ndiv_limits_request {
- /** @brief Enum cluster_id */
+ /** @brief Logical CPU cluster identifier */
uint32_t cluster_id;
} BPMP_ABI_PACKED;
@@ -2678,15 +3520,14 @@ struct mrq_cpu_ndiv_limits_response {
} BPMP_ABI_PACKED;
/** @} CPU */
-/** @endcond (bpmp_t194 || bpmp_t234 || bpmp_t238 || bpmp_th500) */
+/** @endcond */
-/**
+
+/** @cond (bpmp_t194)
* @ingroup MRQ_Codes
* @def MRQ_CPU_AUTO_CC3
* @brief Query CPU cluster auto-CC3 configuration
*
- * * Platforms: T194
- * @cond bpmp_t194
* * Initiators: CCPLEX
* * Targets: BPMP
* * Request Payload: @ref mrq_cpu_auto_cc3_request
@@ -2702,15 +3543,15 @@ struct mrq_cpu_ndiv_limits_response {
*/
/**
- * @brief Request for auto-CC3 configuration of a cluster
+ * @brief Request payload for the #MRQ_CPU_AUTO_CC3 -command
*/
struct mrq_cpu_auto_cc3_request {
- /** @brief Enum cluster_id (logical cluster id, known to CCPLEX s/w) */
+ /** @brief Logical CPU cluster ID */
uint32_t cluster_id;
} BPMP_ABI_PACKED;
/**
- * @brief Response to #MRQ_CPU_AUTO_CC3
+ * @brief Response payload for the #MRQ_CPU_AUTO_CC3 -command
*/
struct mrq_cpu_auto_cc3_response {
/**
@@ -2724,9 +3565,9 @@ struct mrq_cpu_auto_cc3_response {
} BPMP_ABI_PACKED;
/** @} CC3 */
-/** @endcond bpmp_t194 */
+/** @endcond */
-/**
+/** @cond (bpmp_t186 || bpmp_t194 || bpmp_t234)
* @ingroup MRQ_Codes
* @def MRQ_RINGBUF_CONSOLE
* @brief A ring buffer debug console for BPMP
@@ -2811,7 +3652,9 @@ struct cmd_ringbuf_console_query_abi_resp {
*/
struct cmd_ringbuf_console_read_req {
/**
- * @brief Number of bytes requested to be read from the BPMP TX buffer
+ * @brief Number of bytes requested to be read from the BPMP TX buffer.
+ *
+ * Valid range is [0, #MRQ_RINGBUF_CONSOLE_MAX_READ_LEN]
*/
uint8_t len;
} BPMP_ABI_PACKED;
@@ -2823,7 +3666,11 @@ struct cmd_ringbuf_console_read_req {
struct cmd_ringbuf_console_read_resp {
/** @brief The actual data read from the BPMP TX buffer */
uint8_t data[MRQ_RINGBUF_CONSOLE_MAX_READ_LEN];
- /** @brief Number of bytes in cmd_ringbuf_console_read_resp::data */
+ /**
+ * @brief Number of bytes in cmd_ringbuf_console_read_resp::data
+ *
+ * Valid range is [0, #MRQ_RINGBUF_CONSOLE_MAX_WRITE_LEN]
+ */
uint8_t len;
} BPMP_ABI_PACKED;
@@ -2904,14 +3751,13 @@ union mrq_ringbuf_console_bpmp_to_host_response {
} BPMP_ABI_PACKED;
/** @} RingbufConsole */
+/** @endcond */
-/**
+/** @cond (!bpmp_t186 && !(bpmp_safe && bpmp_t234))
* @ingroup MRQ_Codes
* @def MRQ_STRAP
* @brief Set a strap value controlled by BPMP
*
- * * Platforms: T194 onwards
- * @cond (bpmp_t194 || bpmp_t234 || bpmp_t238 || bpmp_th500)
* * Initiators: CCPLEX
* * Targets: BPMP
* * Request Payload: @ref mrq_strap_request
@@ -2925,10 +3771,14 @@ union mrq_ringbuf_console_bpmp_to_host_response {
* deasserted.
*
* BPMP owns registers which act as straps to various units. It
- * exposes limited control of those straps via #MRQ_STRAP.
+ * exposes limited control of those registers via #MRQ_STRAP.
*
* @{
*/
+
+/**
+ * @brief Sub-command identifiers for the #MRQ_STRAP -command.
+ */
enum mrq_strap_cmd {
/** @private */
STRAP_RESERVED = 0,
@@ -2937,27 +3787,31 @@ enum mrq_strap_cmd {
};
/**
- * @brief Request with #MRQ_STRAP
+ * @brief Request payload for the #MRQ_STRAP -command.
*/
struct mrq_strap_request {
- /** @brief @ref mrq_strap_cmd */
+ /** @brief Sub-command identifier from @ref mrq_strap_cmd */
uint32_t cmd;
- /** @brief Strap ID from @ref Strap_Identifiers */
+ /**
+ * @if (bpmp_t234 || bpmp_th500 || bpmp_t264)
+ * @brief Strap ID from @ref bpmp_strap_ids
+ * @else
+ * @brief Strap ID (undefined)
+ * @endif
+ */
uint32_t id;
- /** @brief Desired value for strap (if cmd is #STRAP_SET) */
+ /** @brief Desired value for strap (if #cmd is #STRAP_SET) */
uint32_t value;
} BPMP_ABI_PACKED;
/** @} Strap */
-/** @endcond (bpmp_t194 || bpmp_t234 || bpmp_t238 || bpmp_th500) */
+/** @endcond */
-/**
+/** @cond (bpmp_t194 || bpmp_t234 || bpmp_th500)
* @ingroup MRQ_Codes
* @def MRQ_UPHY
* @brief Perform a UPHY operation
*
- * * Platforms: T194 onwards
- * @cond (bpmp_t194 || bpmp_t234 || bpmp_t238 || bpmp_th500)
* * Initiators: CCPLEX
* * Targets: BPMP
* * Request Payload: @ref mrq_uphy_request
@@ -2966,52 +3820,124 @@ struct mrq_strap_request {
* @addtogroup UPHY
* @{
*/
-enum {
+
+/**
+ * @brief Sub-command identifiers for #MRQ_UPHY.
+ */
+enum mrq_uphy_cmd {
+ /** @brief Trigger PCIE lane margining procedure. */
CMD_UPHY_PCIE_LANE_MARGIN_CONTROL = 1,
+ /** @brief Return PCIE lane margining status. */
CMD_UPHY_PCIE_LANE_MARGIN_STATUS = 2,
+ /** @brief Initialize PCIE EP PLL controller. */
CMD_UPHY_PCIE_EP_CONTROLLER_PLL_INIT = 3,
+ /** @brief Set state of the PCIE RP/EP controller. */
CMD_UPHY_PCIE_CONTROLLER_STATE = 4,
+ /** @brief Disable PCIE EP PLL controller. */
CMD_UPHY_PCIE_EP_CONTROLLER_PLL_OFF = 5,
+
+ /**
+ * @cond bpmp_t238
+ * @brief Initialize and enable UPHY display port.
+ */
CMD_UPHY_DISPLAY_PORT_INIT = 6,
+ /** @brief Disable UPHY display port. */
CMD_UPHY_DISPLAY_PORT_OFF = 7,
+ /** @brief Trigger sequence to restore XUSB DYN lanes during SC7 exit. */
CMD_UPHY_XUSB_DYN_LANES_RESTORE = 8,
+ /** @endcond */
+
+ /**
+ * @cond bpmp_th500
+ * @brief Perform UPHY Lane EOM scan.
+ */
+ CMD_UPHY_LANE_EOM_SCAN = 9,
+ /** @brief Config PCIe VDM with a given BDF ID. */
+ CMD_UPHY_PCIE_CONFIG_VDM = 10,
+ /** @endcond */
+
CMD_UPHY_MAX,
};
+/**
+ * @brief Request payload for #MRQ_UPHY sub-command #CMD_UPHY_PCIE_LANE_MARGIN_CONTROL.
+ */
struct cmd_uphy_margin_control_request {
- /** @brief Enable margin */
+ /**
+ * @brief Enable margin.
+ *
+ * Valid values:
+ * * Value 0 disables margin,
+ * * Value 1 enables margin.
+ */
int32_t en;
- /** @brief Clear the number of error and sections */
+ /**
+ * @brief Clear the number of error and sections.
+ *
+ * Valid values:
+ *
+ * * Value 0: Skip clear,
+ * * Value 1: Perform clear.
+ */
int32_t clr;
- /** @brief Set x offset (1's complement) for left/right margin type (y should be 0) */
+ /**
+ * @brief Set x offset (1's complement) for left/right margin type (y should be 0).
+ *
+ * Valid range is [0, 127]
+ */
uint32_t x;
- /** @brief Set y offset (1's complement) for left/right margin type (x should be 0) */
+ /**
+ * @brief Set y offset (1's complement) for left/right margin type (x should be 0)
+ *
+ * Valid range is [0, 63]
+ */
uint32_t y;
- /** @brief Set number of bit blocks for each margin section */
+ /**
+ * @brief Set number of bit blocks for each margin section.
+ *
+ * Valid range is [0, 15]
+ */
uint32_t nblks;
} BPMP_ABI_PACKED;
+/**
+ * @brief Response payload for #MRQ_UPHY sub-command #CMD_UPHY_PCIE_LANE_MARGIN_STATUS.
+ */
struct cmd_uphy_margin_status_response {
/** @brief Number of errors observed */
uint32_t status;
} BPMP_ABI_PACKED;
+/**
+ * @brief Request payload for #MRQ_UPHY sub-command #CMD_UPHY_PCIE_EP_CONTROLLER_PLL_INIT.
+ */
struct cmd_uphy_ep_controller_pll_init_request {
/** @brief EP controller number, T194 valid: 0, 4, 5; T234 valid: 5, 6, 7, 10; T238 valid: 0 */
uint8_t ep_controller;
} BPMP_ABI_PACKED;
+/**
+ * @brief Request payload for #MRQ_UPHY sub-command #CMD_UPHY_PCIE_CONTROLLER_STATE.
+ */
struct cmd_uphy_pcie_controller_state_request {
/** @brief PCIE controller number, T194 valid: 0-4; T234 valid: 0-10; T238 valid: 0-3 */
uint8_t pcie_controller;
+ /** @brief Nonzero value to enable controller, zero value to disable */
uint8_t enable;
} BPMP_ABI_PACKED;
+/**
+ * @brief Request payload for #MRQ_UPHY sub-command #CMD_UPHY_PCIE_EP_CONTROLLER_PLL_OFF.
+ */
struct cmd_uphy_ep_controller_pll_off_request {
/** @brief EP controller number, T194 valid: 0, 4, 5; T234 valid: 5, 6, 7, 10; T238 valid: 0 */
uint8_t ep_controller;
} BPMP_ABI_PACKED;
+/**
+ * @cond bpmp_t238
+ * @brief Request payload for #MRQ_UPHY sub-command #CMD_UPHY_DISPLAY_PORT_INIT.
+ */
struct cmd_uphy_display_port_init_request {
/** @brief DisplayPort link rate, T238 valid: 1620, 2700, 5400, 8100, 2160, 2430, 3240, 4320, 6750 */
uint16_t link_rate;
@@ -3019,37 +3945,90 @@ struct cmd_uphy_display_port_init_request {
uint16_t lanes_bitmap;
} BPMP_ABI_PACKED;
+/**
+ * @brief Request payload for #MRQ_UPHY sub-command #CMD_UPHY_XUSB_DYN_LANES_RESTORE.
+ */
struct cmd_uphy_xusb_dyn_lanes_restore_request {
/** @brief 1: lane 0; 2: lane 1; 3: lane 0 and 1 */
uint16_t lanes_bitmap;
} BPMP_ABI_PACKED;
+/** @endcond */
+
+/**
+ * @cond bpmp_th500
+ * @brief Request payload for #MRQ_UPHY sub-command #CMD_UPHY_LANE_EOM_SCAN
+ */
+struct cmd_uphy_lane_eom_scan_request {
+ /** @brief UPHY brick number, valid: 0-5 */
+ uint32_t brick;
+ /** @brief UPHY lane number, valid: 0-15 for UPHY0-UPHY3, 0-1 for UPHY4-UPHY5 */
+ uint32_t lane;
+ /** @brief Perform EOM for PCIE GEN5 link: 1 for yes, 0 for no. */
+ uint32_t pcie_gen5;
+} BPMP_ABI_PACKED;
+
+/**
+ * @brief Response payload for #MRQ_UPHY sub-command #CMD_UPHY_LANE_EOM_SCAN
+ */
+struct cmd_uphy_lane_eom_scan_response {
+ uint32_t data;
+} BPMP_ABI_PACKED;
+
+/**
+ * @brief Request payload for #MRQ_UPHY sub-command #CMD_UPHY_PCIE_CONFIG_VDM
+ */
+struct cmd_uphy_pcie_config_vdm_request {
+ uint8_t pcie_controller;
+ /**
+ * @brief Bus/Dev/Func ID to be programmed for VDM.
+ *
+ * - bits[15..8] Bus
+ * - bits[7..3] Dev
+ * - bit [2..0] Func
+ */
+ uint16_t bdf;
+} BPMP_ABI_PACKED;
+/** @endcond */
/**
* @ingroup UPHY
- * @brief Request with #MRQ_UPHY
+ * @brief Request payload for the #MRQ_UPHY -command.
*
* Used by the sender of an #MRQ_UPHY message to control UPHY.
* The uphy_request is split into several sub-commands. CMD_UPHY_PCIE_LANE_MARGIN_STATUS
* requires no additional data. Others have a sub-command specific payload. Below table
* shows sub-commands with their corresponding payload data.
*
- * |sub-command |payload |
- * |------------------------------------ |----------------------------------------|
- * |CMD_UPHY_PCIE_LANE_MARGIN_CONTROL |uphy_set_margin_control |
- * |CMD_UPHY_PCIE_LANE_MARGIN_STATUS | |
- * |CMD_UPHY_PCIE_EP_CONTROLLER_PLL_INIT |cmd_uphy_ep_controller_pll_init_request |
- * |CMD_UPHY_PCIE_CONTROLLER_STATE |cmd_uphy_pcie_controller_state_request |
- * |CMD_UPHY_PCIE_EP_CONTROLLER_PLL_OFF |cmd_uphy_ep_controller_pll_off_request |
- * |CMD_UPHY_PCIE_DISPLAY_PORT_INIT |cmd_uphy_display_port_init_request |
- * |CMD_UPHY_PCIE_DISPLAY_PORT_OFF | |
- * |CMD_UPHY_XUSB_DYN_LANES_RESTORE |cmd_uphy_xusb_dyn_lanes_restore_request |
+ * |sub-command |payload |
+ * |--------------------------------------|-----------------------------------------|
+ * |#CMD_UPHY_PCIE_LANE_MARGIN_CONTROL |#cmd_uphy_margin_control_request |
+ * |#CMD_UPHY_PCIE_LANE_MARGIN_STATUS |- |
+ * |#CMD_UPHY_PCIE_EP_CONTROLLER_PLL_INIT |#cmd_uphy_ep_controller_pll_init_request |
+ * |#CMD_UPHY_PCIE_CONTROLLER_STATE |#cmd_uphy_pcie_controller_state_request |
+ * |#CMD_UPHY_PCIE_EP_CONTROLLER_PLL_OFF |#cmd_uphy_ep_controller_pll_off_request |
+ *
+ * @cond bpmp_t238
+ * The following additional sub-commands are supported on T238 platforms:
+ *
+ * |sub-command |payload |
+ * |--------------------------------------|-----------------------------------------|
+ * |#CMD_UPHY_DISPLAY_PORT_INIT |#cmd_uphy_display_port_init_request |
+ * |#CMD_UPHY_DISPLAY_PORT_OFF |- |
+ * |#CMD_UPHY_XUSB_DYN_LANES_RESTORE |#cmd_uphy_xusb_dyn_lanes_restore_request |
+ * @endcond
*
+ * @cond bpmp_th500
+ * The following additional sub-commands are supported on TH500 platforms:
+ * |sub-command |payload |
+ * |--------------------------------------|-----------------------------------------|
+ * |#CMD_UPHY_LANE_EOM_SCAN |#cmd_uphy_lane_eom_scan_request |
+ * |#CMD_UPHY_PCIE_CONFIG_VDM |#cmd_uphy_pcie_config_vdm_request |
+ * @endcond
*/
-
struct mrq_uphy_request {
/** @brief Lane number. */
uint16_t lane;
- /** @brief Sub-command id. */
+ /** @brief Sub-command ID from @ref mrq_uphy_cmd. */
uint16_t cmd;
union {
@@ -3057,53 +4036,68 @@ struct mrq_uphy_request {
struct cmd_uphy_ep_controller_pll_init_request ep_ctrlr_pll_init;
struct cmd_uphy_pcie_controller_state_request controller_state;
struct cmd_uphy_ep_controller_pll_off_request ep_ctrlr_pll_off;
+ /** @cond bpmp_t238 */
struct cmd_uphy_display_port_init_request display_port_init;
struct cmd_uphy_xusb_dyn_lanes_restore_request xusb_dyn_lanes_restore;
+ /** @endcond */
+ /** @cond bpmp_th500 */
+ struct cmd_uphy_lane_eom_scan_request lane_eom_scan;
+ struct cmd_uphy_pcie_config_vdm_request pcie_vdm;
+ /** @endcond */
} BPMP_UNION_ANON;
} BPMP_ABI_PACKED;
/**
* @ingroup UPHY
- * @brief Response to MRQ_UPHY
+ * @brief Response payload for the #MRQ_UPHY -command.
*
* Each sub-command supported by @ref mrq_uphy_request may return
* sub-command-specific data. Some do and some do not as indicated in
* the following table
*
- * |sub-command |payload |
- * |---------------------------- |------------------------|
- * |CMD_UPHY_PCIE_LANE_MARGIN_CONTROL | |
- * |CMD_UPHY_PCIE_LANE_MARGIN_STATUS |uphy_get_margin_status |
+ * |sub-command |payload |
+ * |-----------------------------------|---------------------------------|
+ * |#CMD_UPHY_PCIE_LANE_MARGIN_CONTROL |- |
+ * |#CMD_UPHY_PCIE_LANE_MARGIN_STATUS |#cmd_uphy_margin_status_response |
*
+ * @cond bpmp_th500
+ * The following additional sub-commands are supported on TH500 platforms:
+ * |sub-command |payload |
+ * |-----------------------------------|---------------------------------|
+ * |#CMD_UPHY_LANE_EOM_SCAN |#cmd_uphy_lane_eom_scan_response |
+ * |#CMD_UPHY_PCIE_CONFIG_VDM |- |
+ * @endcond
*/
-
struct mrq_uphy_response {
union {
struct cmd_uphy_margin_status_response uphy_get_margin_status;
+ /** @cond bpmp_th500 */
+ struct cmd_uphy_lane_eom_scan_response eom_status;
+ /** @endcond */
} BPMP_UNION_ANON;
} BPMP_ABI_PACKED;
/** @} UPHY */
-/** @endcond (bpmp_t194 || bpmp_t234 || bpmp_t238 || bpmp_th500) */
+/** @endcond */
-/**
+/** @cond (bpmp_t194 || bpmp_t234 || bpmp_t238 || bpmp_t264)
* @ingroup MRQ_Codes
* @def MRQ_FMON
- * @brief Perform a frequency monitor configuration operations
+ * @brief Perform a frequency monitor configuration operation
*
- * * Platforms: T194 onwards
- * @cond (bpmp_t194 || bpmp_t234 || bpmp_t238 || bpmp_th500)
* * Initiators: CCPLEX
* * Targets: BPMP
* * Request Payload: @ref mrq_fmon_request
* * Response Payload: @ref mrq_fmon_response
- * @endcond (bpmp_t194 || bpmp_t234 || bpmp_t238 || bpmp_th500)
*
* @addtogroup FMON
* @{
- * @cond (bpmp_t194 || bpmp_t234)
*/
-enum {
+
+/**
+ * @brief Sub-command identifiers for #MRQ_FMON
+ */
+enum mrq_fmon_cmd {
/**
* @brief Clamp FMON configuration to specified rate.
*
@@ -3111,62 +4105,80 @@ enum {
* clamped, FMON configuration is preserved when clock rate
* and/or state is changed.
*
- * mrq_response::err is 0 if the operation was successful, or @n
- * -#BPMP_EACCES: FMON access error @n
- * -#BPMP_EBADCMD if subcommand is not supported @n
- * -#BPMP_EBADSLT: clamp FMON on cluster with auto-CC3 enabled @n
- * -#BPMP_EBUSY: fmon is already clamped at different rate @n
- * -#BPMP_EFAULT: self-diagnostic error @n
- * -#BPMP_EINVAL: invalid FMON configuration @n
- * -#BPMP_EOPNOTSUPP: not in production mode @n
- * -#BPMP_ENODEV: invalid clk_id @n
- * -#BPMP_ENOENT: no calibration data, uninitialized @n
- * -#BPMP_ENOTSUP: avfs config not set @n
- * -#BPMP_ENOSYS: clamp FMON on cluster clock w/ no NAFLL @n
- * -#BPMP_ETIMEDOUT: operation timed out @n
+ * mrq_response::err for this sub-command is defined to be:
+ *
+ * | Value | Description |
+ * |-------------------|---------------------------------------------------|
+ * | 0 | Operation was successful. |
+ * | -#BPMP_EBADCMD | Subcommand is not supported. |
+ * | -#BPMP_EACCES | FMON access error. |
+ * | -#BPMP_EBADSLT | Clamp FMON on cluster with auto-CC3 enabled. |
+ * | -#BPMP_EBUSY | FMON is already clamped at different rate. |
+ * | -#BPMP_EFAULT | Self-diagnostic error detected. |
+ * | -#BPMP_EINVAL | Invalid FMON configuration. |
+ * | -#BPMP_EOPNOTSUPP | Not in production mode. |
+ * | -#BPMP_ENODEV | Invalid clock ID in mrq_fmon_request::cmd_and_id. |
+ * | -#BPMP_ENOENT | No calibration data, uninitialized. |
+ * | -#BPMP_ENOTSUP | AVFS config not set. |
+ * | -#BPMP_ENOSYS | Clamp FMON on cluster clock w/ no NAFLL. |
+ * | -#BPMP_ETIMEDOUT | Operation timed out. |
*/
CMD_FMON_GEAR_CLAMP = 1,
+
/**
* @brief Release clamped FMON configuration.
*
* Allow FMON configuration to follow monitored clock rate
* and/or state changes.
*
- * mrq_response::err is 0 if the operation was successful, or @n
- * -#BPMP_EBADCMD if subcommand is not supported @n
- * -#BPMP_ENODEV: invalid clk_id @n
- * -#BPMP_ENOENT: no calibration data, uninitialized @n
- * -#BPMP_ENOTSUP: avfs config not set @n
- * -#BPMP_EOPNOTSUPP: not in production mode @n
+ * mrq_response::err for this sub-command is defined to be:
+ *
+ * | Value | Description |
+ * |-------------------|---------------------------------------------------|
+ * | 0 | Operation was successful. |
+ * | -#BPMP_EBADCMD | Subcommand is not supported. |
+ * | -#BPMP_ENODEV | Invalid clock ID in mrq_fmon_request::cmd_and_id. |
+ * | -#BPMP_ENOENT | No calibration data, uninitialized. |
+ * | -#BPMP_ENOTSUP | AVFS config not set. |
+ * | -#BPMP_EOPNOTSUPP | Not in production mode. |
*/
CMD_FMON_GEAR_FREE = 2,
+
/**
- * @brief Return rate FMON is clamped at, or 0 if FMON is not
- * clamped.
+ * @brief Return rate FMON is clamped at, or 0 if FMON is not clamped.
*
- * Inherently racy, since clamp state can be changed
- * concurrently. Useful for testing.
+ * Inherently racy, since clamp state can be changed concurrently,
+ * only provided and useful for testing purposes.
*
- * mrq_response::err is 0 if the operation was successful, or @n
- * -#BPMP_EBADCMD if subcommand is not supported @n
- * -#BPMP_ENODEV: invalid clk_id @n
- * -#BPMP_ENOENT: no calibration data, uninitialized @n
- * -#BPMP_ENOTSUP: avfs config not set @n
- * -#BPMP_EOPNOTSUPP: not in production mode @n
+ * mrq_response::err for this sub-command is defined to be:
+ *
+ * | Value | Description |
+ * |-------------------|---------------------------------------------------|
+ * | 0 | Operation was successful. |
+ * | -#BPMP_EBADCMD | Subcommand is not supported. |
+ * | -#BPMP_ENODEV | Invalid clock ID in mrq_fmon_request::cmd_and_id. |
+ * | -#BPMP_ENOENT | No calibration data, uninitialized. |
+ * | -#BPMP_ENOTSUP | AVFS config not set. |
+ * | -#BPMP_EOPNOTSUPP | Not in production mode. |
*/
CMD_FMON_GEAR_GET = 3,
+
/**
* @brief Return current status of FMON faults detected by FMON
- * h/w or s/w since last invocation of this command.
- * Clears fault status.
+ * HW or SW since last invocation of this sub-command.
+ * Clears fault status.
*
- * mrq_response::err is 0 if the operation was successful, or @n
- * -#BPMP_EBADCMD if subcommand is not supported @n
- * -#BPMP_EINVAL: invalid fault type @n
- * -#BPMP_ENODEV: invalid clk_id @n
- * -#BPMP_ENOENT: no calibration data, uninitialized @n
- * -#BPMP_ENOTSUP: avfs config not set @n
- * -#BPMP_EOPNOTSUPP: not in production mode @n
+ * mrq_response::err for this sub-command is defined to be:
+ *
+ * | Value | Description |
+ * |-------------------|---------------------------------------------------|
+ * | 0 | Operation was successful. |
+ * | -#BPMP_EBADCMD | Subcommand is not supported. |
+ * | -#BPMP_ENODEV | Invalid clock ID in mrq_fmon_request::cmd_and_id. |
+ * | -#BPMP_ENOENT | No calibration data, uninitialized. |
+ * | -#BPMP_ENOTSUP | AVFS config not set. |
+ * | -#BPMP_EOPNOTSUPP | Not in production mode. |
+ * | -#BPMP_EINVAL | Invalid fault type. |
*/
CMD_FMON_FAULT_STS_GET = 4,
};
@@ -3177,25 +4189,30 @@ enum {
*/
#define CMD_FMON_NUM 4
-/** @endcond DEPRECATED */
+/** @endcond */
/**
- * @defgroup fmon_fault_type FMON fault type
+ * @defgroup fmon_fault_type FMON fault types
* @addtogroup fmon_fault_type
* @{
*/
-/** @brief All detected FMON faults (h/w or s/w) */
+/** @brief All detected FMON faults (HW or SW) */
#define FMON_FAULT_TYPE_ALL 0U
-/** @brief FMON faults detected by h/w */
+/** @brief FMON faults detected by HW */
#define FMON_FAULT_TYPE_HW 1U
-/** @brief FMON faults detected by s/w */
+/** @brief FMON faults detected by SW */
#define FMON_FAULT_TYPE_SW 2U
/** @} fmon_fault_type */
-
+/**
+ * @brief Request payload for #MRQ_FMON sub-command #CMD_FMON_GEAR_CLAMP.
+ */
struct cmd_fmon_gear_clamp_request {
+ /** @brief Unused / reserved */
int32_t unused;
+
+ /** @brief Target rate in Hz. Valid range for the rate is [1, INT64_MAX] */
int64_t rate;
} BPMP_ABI_PACKED;
@@ -3219,40 +4236,63 @@ struct cmd_fmon_gear_get_request {
BPMP_ABI_EMPTY
} BPMP_ABI_PACKED;
+/**
+ * @brief Response payload for #MRQ_FMON sub-command #CMD_FMON_GEAR_GET.
+ */
struct cmd_fmon_gear_get_response {
int64_t rate;
} BPMP_ABI_PACKED;
+/**
+ * @brief Request payload for #MRQ_FMON sub-command #CMD_FMON_FAULT_STS_GET
+ */
struct cmd_fmon_fault_sts_get_request {
- uint32_t fault_type; /**< @ref fmon_fault_type */
+ /**
+ * @brief Which fault types to return in response:
+ *
+ * | Value | Description |
+ * |----------------------|-----------------------------------------|
+ * | #FMON_FAULT_TYPE_ALL | Return all detected faults (HW and SW). |
+ * | #FMON_FAULT_TYPE_HW | Return only HW detected faults. |
+ * | #FMON_FAULT_TYPE_SW | Return only SW detected faults. |
+ */
+ uint32_t fault_type;
} BPMP_ABI_PACKED;
+/**
+ * @brief Response payload for #MRQ_FMON sub-command #CMD_FMON_FAULT_STS_GET
+ */
struct cmd_fmon_fault_sts_get_response {
+ /**
+ * Bitmask of detected HW / SW specific faults, or 0 if no faults have
+ * been detected since last invocation of #CMD_FMON_FAULT_STS_GET.
+ */
uint32_t fault_sts;
} BPMP_ABI_PACKED;
/**
* @ingroup FMON
- * @brief Request with #MRQ_FMON
+ * @brief Request payload for the #MRQ_FMON -command.
*
* Used by the sender of an #MRQ_FMON message to configure clock
* frequency monitors. The FMON request is split into several
- * sub-commands. Some sub-commands require no additional data.
- * Others have a sub-command specific payload
+ * sub-commands. Sub-command specific payloads are defined in
+ * the following table:
*
- * |sub-command |payload |
- * |----------------------------|-----------------------|
- * |CMD_FMON_GEAR_CLAMP |fmon_gear_clamp |
- * |CMD_FMON_GEAR_FREE |- |
- * |CMD_FMON_GEAR_GET |- |
- * |CMD_FMON_FAULT_STS_GET |fmon_fault_sts_get |
+ * |Sub-command |Payload |
+ * |------------------------|--------------------------------|
+ * |#CMD_FMON_GEAR_CLAMP |#cmd_fmon_gear_clamp_request |
+ * |#CMD_FMON_GEAR_FREE |- |
+ * |#CMD_FMON_GEAR_GET |- |
+ * |#CMD_FMON_FAULT_STS_GET |#cmd_fmon_fault_sts_get_request |
*
*/
struct mrq_fmon_request {
- /** @brief Sub-command and clock id concatenated to 32-bit word.
- * - bits[31..24] is the sub-cmd.
- * - bits[23..0] is monitored clock id used to select target
- * FMON
+ /**
+ * @brief Sub-command and clock id concatenated to 32-bit word.
+ *
+ * - bits[31..24] -> Sub-command identifier from @ref mrq_fmon_cmd.
+ * - bits[23..0] -> Monitored clock identifier used to select target FMON.
*/
uint32_t cmd_and_id;
@@ -3268,20 +4308,19 @@ struct mrq_fmon_request {
/**
* @ingroup FMON
- * @brief Response to MRQ_FMON
+ * @brief Response payload for the #MRQ_FMON -command.
*
* Each sub-command supported by @ref mrq_fmon_request may
* return sub-command-specific data as indicated below.
*
- * |sub-command |payload |
- * |----------------------------|------------------------|
- * |CMD_FMON_GEAR_CLAMP |- |
- * |CMD_FMON_GEAR_FREE |- |
- * |CMD_FMON_GEAR_GET |fmon_gear_get |
- * |CMD_FMON_FAULT_STS_GET |fmon_fault_sts_get |
+ * |Sub-command |Payload |
+ * |------------------------|---------------------------------|
+ * |#CMD_FMON_GEAR_CLAMP |- |
+ * |#CMD_FMON_GEAR_FREE |- |
+ * |#CMD_FMON_GEAR_GET |#cmd_fmon_gear_get_response |
+ * |#CMD_FMON_FAULT_STS_GET |#cmd_fmon_fault_sts_get_response |
*
*/
-
struct mrq_fmon_response {
union {
/** @private */
@@ -3293,17 +4332,15 @@ struct mrq_fmon_response {
} BPMP_UNION_ANON;
} BPMP_ABI_PACKED;
-/** @endcond (bpmp_t194 || bpmp_t234) */
/** @} FMON */
+/** @endcond */
-/**
+/** @cond (bpmp_t194)
* @ingroup MRQ_Codes
* @def MRQ_EC
* @brief Provide status information on faults reported by Error
* Collator (EC) to HSM.
*
- * * Platforms: T194
- * @cond bpmp_t194
* * Initiators: CCPLEX
* * Targets: BPMP
* * Request Payload: @ref mrq_ec_request
@@ -3311,10 +4348,8 @@ struct mrq_fmon_response {
*
* @note This MRQ ABI is under construction, and subject to change
*
- * @endcond bpmp_t194
* @addtogroup EC
* @{
- * @cond bpmp_t194
*/
enum {
/**
@@ -3325,7 +4360,7 @@ enum {
* -#BPMP_ENODEV if target EC is not owned by BPMP @n
* -#BPMP_EACCES if target EC power domain is turned off @n
* -#BPMP_EBADCMD if subcommand is not supported
- * @endcond DEPRECATED
+ * @endcond
*/
CMD_EC_STATUS_GET = 1, /* deprecated */
@@ -3572,7 +4607,7 @@ struct cmd_ec_status_get_response {
/** @brief EC error descriptors */
union ec_err_desc error_descs[EC_ERR_STATUS_DESC_MAX_NUM];
} BPMP_ABI_PACKED;
-/** @endcond DEPRECATED */
+/** @endcond */
struct cmd_ec_status_ex_get_response {
/** @brief Target EC id (the same id received with request). */
@@ -3610,7 +4645,7 @@ struct cmd_ec_status_ex_get_response {
* |sub-command |payload |
* |----------------------------|-----------------------|
* |@ref CMD_EC_STATUS_GET |ec_status_get |
- * @endcond DEPRECATED
+ * @endcond
*
* |sub-command |payload |
* |----------------------------|-----------------------|
@@ -3638,7 +4673,7 @@ struct mrq_ec_request {
* |sub-command |payload |
* |----------------------------|------------------------|
* |@ref CMD_EC_STATUS_GET |ec_status_get |
- * @endcond DEPRECATED
+ * @endcond
*
* |sub-command |payload |
* |----------------------------|------------------------|
@@ -3652,22 +4687,20 @@ struct mrq_ec_response {
* @cond DEPRECATED
*/
struct cmd_ec_status_get_response ec_status_get;
- /** @endcond DEPRECATED */
+ /** @endcond */
struct cmd_ec_status_ex_get_response ec_status_ex_get;
} BPMP_UNION_ANON;
} BPMP_ABI_PACKED;
-/** @endcond bpmp_t194 */
/** @} EC */
+/** @endcond */
-/**
+/** @cond (bpmp_th500)
* @ingroup MRQ_Codes
* @def MRQ_TELEMETRY
* @brief Get address of memory buffer refreshed with recently sampled
* telemetry data
*
- * * Platforms: TH500 onwards
- * @cond bpmp_th500
* * Initiators: CCPLEX
* * Targets: BPMP
* * Request Payload: N/A
@@ -3677,14 +4710,17 @@ struct mrq_ec_response {
*/
/**
- * @brief Response to #MRQ_TELEMETRY
+ * @brief Response payload for the #MRQ_TELEMETRY -command
*
- * mrq_response::err is
- * * 0: Telemetry data is available at returned address
- * * -#BPMP_EACCES: MRQ master is not allowed to request buffer refresh
- * * -#BPMP_ENAVAIL: Telemetry buffer cannot be refreshed via this MRQ channel
- * * -#BPMP_ENOTSUP: Telemetry buffer is not supported by BPMP-FW
- * * -#BPMP_ENODEV: Telemetry mrq is not supported by BPMP-FW
+ * mrq_response::err is defined as:
+ *
+ * | Value | Description |
+ * |-----------------|------------------------------------------------------------|
+ * | 0 | Telemetry data is available at returned address. |
+ * | -#BPMP_EACCES | MRQ master is not allowed to request buffer refresh. |
+ * | -#BPMP_ENAVAIL | Telemetry buffer cannot be refreshed via this MRQ channel. |
+ * | -#BPMP_ENOTSUP | Telemetry buffer is not supported by BPMP-FW. |
+ * | -#BPMP_ENODEV | Telemetry MRQ is not supported by BPMP-FW. |
*/
struct mrq_telemetry_response {
/** @brief Physical address of telemetry data buffer */
@@ -3692,15 +4728,112 @@ struct mrq_telemetry_response {
} BPMP_ABI_PACKED;
/** @} Telemetry */
-/** @endcond bpmp_th500 */
+/** @endcond */
+
+/** @cond (bpmp_tb500)
+ * @ingroup MRQ_Codes
+ * @def MRQ_TELEMETRY_EX
+ * @brief Get telemetry configuration settings.
+ *
+ * * Initiators: Any
+ * * Targets: BPMP
+ * * Request Payload: @ref mrq_telemetry_ex_request
+ * * Response Payload: @ref mrq_telemetry_ex_response
+ *
+ * @addtogroup Telemetry_ex
+ * @{
+ */
+
+/**
+ * @brief Sub-command identifiers for #MRQ_TELEMETRY_EX.
+ */
+enum mrq_telemetry_ex_cmd {
+ /**
+ * @brief Check whether the BPMP-FW supports the specified
+ * #MRQ_TELEMETRY_EX sub-command.
+ *
+ * mrq_response::err is 0 if the specified request is
+ * supported and -#BPMP_ENODEV otherwise.
+ */
+ CMD_TELEMETRY_EX_QUERY_ABI = 0,
+
+ /**
+ * @brief Get telemetry buffer base address and data size
+ *
+ * mrq_response:err is defined as:
+ *
+ * | Value | Description |
+ * |----------------|------------------------------------------------|
+ * | 0 | Success |
+ * | -#BPMP_ENODEV | #MRQ_TELEMETRY_EX is not supported by BPMP-FW. |
+ */
+ CMD_TELEMETRY_EX_BASE_SZ_GET = 1,
+};
/**
+ * @brief Request data for #MRQ_TELEMETRY_EX sub-command
+ * #CMD_TELEMETRY_EX_QUERY_ABI
+ */
+struct cmd_telemetry_ex_query_abi_request {
+ /** @brief Sub-command identifier from @ref mrq_telemetry_ex_cmd */
+ uint32_t cmd_code;
+} BPMP_ABI_PACKED;
+
+/**
+ * @brief Response payload for #MRQ_TELEMETRY_EX sub-command
+ * #CMD_TELEMETRY_EX_BASE_SZ_GET
+ */
+struct cmd_telemetry_ex_base_sz_get_response {
+ /**
+ * @brief Physical address of telemetry data buffer
+ *
+ * 0 if no buffer is allocated for the initiator sending MRQ.
+ */
+ uint64_t buf_base_addr;
+ /** @brief Telemetry data size in bytes */
+ uint32_t buf_size;
+} BPMP_ABI_PACKED;
+
+/**
+ * @brief Request payload for the #MRQ_TELEMETRY_EX -command
+ *
+ * | Sub-command | Request payload |
+ * |-------------------------------|----------------------------------------|
+ * | #CMD_TELEMETRY_EX_QUERY_ABI | #cmd_telemetry_ex_query_abi_request |
+ * | #CMD_TELEMETRY_EX_BASE_SZ_GET | - |
+ */
+struct mrq_telemetry_ex_request {
+ /** @brief Sub-command ID from @ref mrq_telemetry_ex_cmd. */
+ uint32_t cmd;
+ union {
+ struct cmd_telemetry_ex_query_abi_request
+ telemetry_ex_query_abi_req;
+ } BPMP_UNION_ANON;
+} BPMP_ABI_PACKED;
+
+/**
+ * @brief Response payload for the #MRQ_TELEMETRY_EX -command.
+ *
+ * | Sub-command | Response payload |
+ * |-------------------------------|----------------------------------------|
+ * | #CMD_TELEMETRY_EX_QUERY_ABI | - |
+ * | #CMD_TELEMETRY_EX_BASE_SZ_GET | #cmd_telemetry_ex_base_sz_get_response |
+ */
+struct mrq_telemetry_ex_response {
+ union {
+ struct cmd_telemetry_ex_base_sz_get_response
+ telemetry_ex_base_sz_get_rsp;
+ } BPMP_UNION_ANON;
+} BPMP_ABI_PACKED;
+
+/** @} Telemetry_ex */
+/** @endcond */
+
+/** @cond (bpmp_th500 || bpmp_tb500)
* @ingroup MRQ_Codes
* @def MRQ_PWR_LIMIT
* @brief Control power limits.
*
- * * Platforms: TH500 onwards
- * @cond bpmp_th500
* * Initiators: Any
* * Targets: BPMP
* * Request Payload: @ref mrq_pwr_limit_request
@@ -3709,10 +4842,14 @@ struct mrq_telemetry_response {
* @addtogroup Pwrlimit
* @{
*/
+
+/**
+ * @brief Sub-command identifiers for #MRQ_PWR_LIMIT.
+ */
enum mrq_pwr_limit_cmd {
/**
* @brief Check whether the BPMP-FW supports the specified
- * command
+ * #MRQ_PWR_LIMIT sub-command.
*
* mrq_response::err is 0 if the specified request is
* supported and -#BPMP_ENODEV otherwise.
@@ -3722,31 +4859,43 @@ enum mrq_pwr_limit_cmd {
/**
* @brief Set power limit
*
- * mrq_response:err is
- * * 0: Success
- * * -#BPMP_ENODEV: Pwr limit mrq is not supported by BPMP-FW
- * * -#BPMP_ENAVAIL: Invalid request parameters
- * * -#BPMP_EACCES: Request is not accepted
+ * mrq_response:err is defined as:
+ *
+ * | Value | Description |
+ * |----------------|---------------------------------------------|
+ * | 0 | Success |
+ * | -#BPMP_ENODEV | #MRQ_PWR_LIMIT is not supported by BPMP-FW. |
+ * | -#BPMP_EINVAL | Invalid request parameters. |
+ * | -#BPMP_EACCES | Request is not accepted. |
*/
CMD_PWR_LIMIT_SET = 1,
/**
* @brief Get power limit setting
*
- * mrq_response:err is
- * * 0: Success
- * * -#BPMP_ENODEV: Pwr limit mrq is not supported by BPMP-FW
- * * -#BPMP_ENAVAIL: Invalid request parameters
+ * mrq_response:err is defined as:
+ *
+ * | Value | Description |
+ * |----------------|---------------------------------------------|
+ * | 0 | Success |
+ * | -#BPMP_ENODEV | #MRQ_PWR_LIMIT is not supported by BPMP-FW. |
+ * | -#BPMP_EINVAL | Invalid request parameters. |
*/
CMD_PWR_LIMIT_GET = 2,
/**
- * @brief Get current power cap
+ * @brief Get current aggregated power cap
*
- * mrq_response:err is
- * * 0: Success
- * * -#BPMP_ENODEV: Pwr limit mrq is not supported by BPMP-FW
- * * -#BPMP_ENAVAIL: Invalid request parameters
+ * Get currently applied power cap for the specified limit id
+ * aggregated across all limit sources and types.
+ *
+ * mrq_response:err is defined as:
+ *
+ * | Value | Description |
+ * |----------------|---------------------------------------------|
+ * | 0 | Success |
+ * | -#BPMP_ENODEV | #MRQ_PWR_LIMIT is not supported by BPMP-FW. |
+ * | -#BPMP_EINVAL | Invalid request parameters. |
*/
CMD_PWR_LIMIT_CURR_CAP = 3,
};
@@ -3761,7 +4910,7 @@ enum mrq_pwr_limit_cmd {
#define PWR_LIMIT_TYPE_BOUND_MAX 1U
/** @brief Limit value specifies minimum possible target cap */
#define PWR_LIMIT_TYPE_BOUND_MIN 2U
-/** @brief Number of limit types supported by mrq interface */
+/** @brief Number of limit types supported by #MRQ_PWR_LIMIT command */
#define PWR_LIMIT_TYPE_NUM 3U
/** @} bpmp_pwr_limit_type */
@@ -3770,7 +4919,8 @@ enum mrq_pwr_limit_cmd {
* @brief Request data for #MRQ_PWR_LIMIT command CMD_PWR_LIMIT_QUERY_ABI
*/
struct cmd_pwr_limit_query_abi_request {
- uint32_t cmd_code; /**< @ref mrq_pwr_limit_cmd */
+ /** @brief Sub-command identifier from @ref mrq_pwr_limit_cmd */
+ uint32_t cmd_code;
} BPMP_ABI_PACKED;
/**
@@ -3782,56 +4932,66 @@ struct cmd_pwr_limit_query_abi_request {
* is ignored by the arbitration (i.e., indicates "no limit set").
*/
struct cmd_pwr_limit_set_request {
- uint32_t limit_id; /**< @ref bpmp_pwr_limit_id */
+ /** @brief Power limit identifier from @ref bpmp_pwr_limit_id */
+ uint32_t limit_id;
+ /** @brief Power limit source identifier from @ref bpmp_pwr_limit_src */
uint32_t limit_src; /**< @ref bpmp_pwr_limit_src */
- uint32_t limit_type; /**< @ref bpmp_pwr_limit_type */
+ /** @brief Power limit type from @ref bpmp_pwr_limit_type */
+ uint32_t limit_type;
+ /** @brief New power limit value */
uint32_t limit_setting;
} BPMP_ABI_PACKED;
/**
- * @brief Request data for #MRQ_PWR_LIMIT command CMD_PWR_LIMIT_GET
+ * @brief Request payload for #MRQ_PWR_LIMIT sub-command #CMD_PWR_LIMIT_GET
*
* Get previously set from specified source specified limit value of specified
* type.
*/
struct cmd_pwr_limit_get_request {
- uint32_t limit_id; /**< @ref bpmp_pwr_limit_id */
+ /** @brief Power limit identifier from @ref bpmp_pwr_limit_id */
+ uint32_t limit_id;
+ /** @brief Power limit source identifier from @ref bpmp_pwr_limit_src */
uint32_t limit_src; /**< @ref bpmp_pwr_limit_src */
- uint32_t limit_type; /**< @ref bpmp_pwr_limit_type */
+ /** @brief Power limit type from @ref bpmp_pwr_limit_type */
+ uint32_t limit_type;
} BPMP_ABI_PACKED;
/**
- * @brief Response data for #MRQ_PWR_LIMIT command CMD_PWR_LIMIT_GET
+ * @brief Response payload for #MRQ_PWR_LIMIT sub-command #CMD_PWR_LIMIT_GET
*/
struct cmd_pwr_limit_get_response {
+ /** @brief Power limit value */
uint32_t limit_setting;
} BPMP_ABI_PACKED;
/**
- * @brief Request data for #MRQ_PWR_LIMIT command CMD_PWR_LIMIT_CURR_CAP
+ * @brief Request payload for #MRQ_PWR_LIMIT sub-command #CMD_PWR_LIMIT_CURR_CAP
*
* For specified limit get current power cap aggregated from all sources.
*/
struct cmd_pwr_limit_curr_cap_request {
- uint32_t limit_id; /**< @ref bpmp_pwr_limit_id */
+ /** @brief Power limit identifier from @ref bpmp_pwr_limit_id */
+ uint32_t limit_id;
} BPMP_ABI_PACKED;
/**
- * @brief Response data for #MRQ_PWR_LIMIT command CMD_PWR_LIMIT_CURR_CAP
+ * @brief Response payload for #MRQ_PWR_LIMIT sub-command #CMD_PWR_LIMIT_CURR_CAP
*/
struct cmd_pwr_limit_curr_cap_response {
+ /** @brief Current power cap value */
uint32_t curr_cap;
} BPMP_ABI_PACKED;
/**
- * @brief Request with #MRQ_PWR_LIMIT
+ * @brief Request payload for the #MRQ_PWR_LIMIT -command
*
- * |sub-command |payload |
- * |----------------------------|---------------------------------|
- * |CMD_PWR_LIMIT_QUERY_ABI | cmd_pwr_limit_query_abi_request |
- * |CMD_PWR_LIMIT_SET | cmd_pwr_limit_set_request |
- * |CMD_PWR_LIMIT_GET | cmd_pwr_limit_get_request |
- * |CMD_PWR_LIMIT_CURR_CAP | cmd_pwr_limit_curr_cap_request |
+ * | Sub-command | Request payload |
+ * |--------------------------|----------------------------------|
+ * | #CMD_PWR_LIMIT_QUERY_ABI | #cmd_pwr_limit_query_abi_request |
+ * | #CMD_PWR_LIMIT_SET | #cmd_pwr_limit_set_request |
+ * | #CMD_PWR_LIMIT_GET | #cmd_pwr_limit_get_request |
+ * | #CMD_PWR_LIMIT_CURR_CAP | #cmd_pwr_limit_curr_cap_request |
*/
struct mrq_pwr_limit_request {
uint32_t cmd;
@@ -3844,14 +5004,14 @@ struct mrq_pwr_limit_request {
} BPMP_ABI_PACKED;
/**
- * @brief Response to MRQ_PWR_LIMIT
+ * @brief Response payload for the #MRQ_PWR_LIMIT -command.
*
- * |sub-command |payload |
- * |----------------------------|---------------------------------|
- * |CMD_PWR_LIMIT_QUERY_ABI | - |
- * |CMD_PWR_LIMIT_SET | - |
- * |CMD_PWR_LIMIT_GET | cmd_pwr_limit_get_response |
- * |CMD_PWR_LIMIT_CURR_CAP | cmd_pwr_limit_curr_cap_response |
+ * | Sub-command | Response payload |
+ * |--------------------------|----------------------------------|
+ * | #CMD_PWR_LIMIT_QUERY_ABI | - |
+ * | #CMD_PWR_LIMIT_SET | - |
+ * | #CMD_PWR_LIMIT_GET | #cmd_pwr_limit_get_response |
+ * | #CMD_PWR_LIMIT_CURR_CAP | #cmd_pwr_limit_curr_cap_response |
*/
struct mrq_pwr_limit_response {
union {
@@ -3860,17 +5020,395 @@ struct mrq_pwr_limit_response {
} BPMP_UNION_ANON;
} BPMP_ABI_PACKED;
-/** @} PwrLimit */
-/** @endcond bpmp_th500 */
+/** @} Pwrlimit */
+/** @endcond */
+
+/** @cond (bpmp_th500)
+ * @ingroup MRQ_Codes
+ * @def MRQ_PWRMODEL
+ * @brief Retrieve power evaluted by SoC power model.
+ *
+ * * Initiators: Any
+ * * Targets: BPMP
+ * * Request Payload: @ref mrq_pwrmodel_request
+ * * Response Payload: @ref mrq_pwrmodel_response
+ *
+ * @addtogroup Pwrmodel
+ * @{
+ */
+
+/**
+ * @brief Sub-command identifiers for #MRQ_PWRMODEL.
+ */
+enum mrq_pwrmodel_cmd {
+ /**
+ * @brief Check whether the BPMP-FW supports the specified
+ * #MRQ_PWRMODEL sub-command.
+ *
+ * mrq_response::err is 0 if the specified request is
+ * supported and -#BPMP_ENODEV otherwise.
+ */
+ CMD_PWRMODEL_QUERY_ABI = 0,
+
+ /**
+ * @brief Get power model output power
+ *
+ * mrq_response:err is defined as:
+ *
+ * | Value | Description |
+ * |----------------|---------------------------------------------|
+ * | 0 | Success |
+ * | -#BPMP_ENODEV | #MRQ_PWRMODEL is not supported by BPMP-FW. |
+ * | -#BPMP_ERANGE | Power model calculation overflow. |
+ */
+ CMD_PWRMODEL_PWR_GET = 1,
+};
+
+/**
+ * @brief Request data for #MRQ_PWRMODEL sub-command #CMD_PWRMODEL_QUERY_ABI
+ */
+struct cmd_pwrmodel_query_abi_request {
+ /** @brief Sub-command identifier from @ref mrq_pwrmodel_cmd */
+ uint32_t cmd_code;
+} BPMP_ABI_PACKED;
+
+/**
+ * @brief Request payload for #MRQ_PWRMODEL sub-command #CMD_PWRMODEL_PWR_GET
+ *
+ * Rerieve power evaluated by power model for specified work-load factor,
+ * temperature, and cpu iso frequency for all cores.
+ */
+struct cmd_pwrmodel_pwr_get_request {
+ /** @brief Unitless work load factor to evaluate power model at */
+ uint32_t work_load_factor;
+ /** @brief CPU frequency in kHz to evaluate power model at */
+ uint32_t cpu_frequency;
+ /** @brief Temperature in mC to evaluate power model at */
+ int32_t temperature;
+} BPMP_ABI_PACKED;
+
+/**
+ * @brief Response payload for #MRQ_PWRMODEL sub-command #CMD_PWRMODEL_PWR_GET
+ */
+struct cmd_pwrmodel_pwr_get_response {
+ /** @brief Power model output in mW */
+ uint32_t power;
+} BPMP_ABI_PACKED;
+
+/**
+ * @brief Request payload for the #MRQ_PWRMODEL -command
+ *
+ * | Sub-command | Request payload |
+ * |--------------------------|----------------------------------|
+ * | #CMD_PWRMODEL_QUERY_ABI | #cmd_pwrmodel_query_abi_request |
+ * | #CMD_PWRMODEL_PWR_GET | #cmd_pwrmodel_pwr_get_request |
+ */
+struct mrq_pwrmodel_request {
+ uint32_t cmd;
+ union {
+ struct cmd_pwrmodel_query_abi_request pwrmodel_query_abi_req;
+ struct cmd_pwrmodel_pwr_get_request pwrmodel_pwr_get_req;
+ } BPMP_UNION_ANON;
+} BPMP_ABI_PACKED;
+
/**
+ * @brief Response payload for the #MRQ_PWRMODEL -command.
+ *
+ * | Sub-command | Response payload |
+ * |--------------------------|----------------------------------|
+ * | #CMD_PWRMODEL_QUERY_ABI | - |
+ * | #CMD_PWRMODEL_PWR_GET | #cmd_pwrmodel_pwr_get_response |
+ */
+struct mrq_pwrmodel_response {
+ union {
+ struct cmd_pwrmodel_pwr_get_response pwrmodel_pwr_get_rsp;
+ } BPMP_UNION_ANON;
+} BPMP_ABI_PACKED;
+
+/** @} Pwrmodel */
+/** @endcond */
+
+
+/** @cond (bpmp_th500)
+ * @ingroup MRQ_Codes
+ * @def MRQ_PWR_CNTRL
+ * @brief Configure power controllers.
+ *
+ * * Initiators: Any
+ * * Targets: BPMP
+ * * Request Payload: @ref mrq_pwr_cntrl_request
+ * * Response Payload: @ref mrq_pwr_cntrl_response
+ *
+ * @addtogroup Pwrcntrl
+ * @{
+ */
+
+/**
+ * @brief Sub-command identifiers for #MRQ_PWR_CNTRL.
+ */
+enum mrq_pwr_cntrl_cmd {
+ /**
+ * @brief Check whether the BPMP-FW supports the specified
+ * #MRQ_PWR_CNTRL sub-command.
+ *
+ * mrq_response::err is 0 if the specified request is
+ * supported and -#BPMP_ENODEV otherwise.
+ */
+ CMD_PWR_CNTRL_QUERY_ABI = 0,
+
+ /**
+ * @brief Switch power controller to/out of bypass mode
+ *
+ * mrq_response:err is defined as:
+ *
+ * | Value | Description |
+ * |----------------|---------------------------------------------|
+ * | 0 | Success |
+ * | -#BPMP_ENODEV | #MRQ_PWR_CNTRL is not supported by BPMP-FW. |
+ * | -#BPMP_EINVAL | Invalid request parameters. |
+ * | -#BPMP_ENOTSUP | Bypass mode is not supported. |
+ */
+ CMD_PWR_CNTRL_BYPASS_SET = 1,
+
+ /**
+ * @brief Get power controller bypass mode status
+ *
+ * mrq_response:err is defined as:
+ *
+ * | Value | Description |
+ * |----------------|---------------------------------------------|
+ * | 0 | Success |
+ * | -#BPMP_ENODEV | #MRQ_PWR_CNTRL is not supported by BPMP-FW. |
+ * | -#BPMP_EINVAL | Invalid request parameters. |
+ */
+ CMD_PWR_CNTRL_BYPASS_GET = 2,
+};
+
+/**
+ * @brief Request data for #MRQ_PWR_CNTRL sub-command #CMD_PWR_CNTRL_QUERY_ABI
+ */
+struct cmd_pwr_cntrl_query_abi_request {
+ /** @brief Sub-command identifier from @ref mrq_pwr_cntrl_cmd */
+ uint32_t cmd_code;
+} BPMP_ABI_PACKED;
+
+/**
+ * @brief Request data for #MRQ_PWR_CNTRL sub-command #CMD_PWR_CNTRL_BYPASS_SET
+ *
+ * Switch specified power controller to / out of bypass mode provided such
+ * mode is supported by the controller.
+ */
+struct cmd_pwr_cntrl_bypass_set_request {
+ /** @brief Power controller identifier from @ref bpmp_pwr_cntrl_id */
+ uint32_t cntrl_id;
+ /**
+ * @brief Bypass setting.
+ *
+ * Valid values:
+ *
+ * * 1 to enter bypass mode,
+ * * 0 to exit bypass mode.
+ */
+ uint32_t bypass_setting;
+} BPMP_ABI_PACKED;
+
+/**
+ * @brief Request data for #MRQ_PWR_CNTRL sub-command #CMD_PWR_CNTRL_BYPASS_GET
+ *
+ * Get bypass mode status of the specified power controller.
+ */
+struct cmd_pwr_cntrl_bypass_get_request {
+ /** @brief Power controller identifier from @ref bpmp_pwr_cntrl_id */
+ uint32_t cntrl_id;
+} BPMP_ABI_PACKED;
+
+/**
+ * @brief Response data for #MRQ_PWR_CNTRL sub-command #CMD_PWR_CNTRL_BYPASS_GET
+ *
+ * Get current bypass mode status if such mode is supported by the controller.
+ * Otherwise, return "out of bypass" .
+ */
+struct cmd_pwr_cntrl_bypass_get_response {
+ /**
+ * @brief Bypass mode status: 1 controller is in bypass,
+ * 0 controller is out of bypass.
+ */
+ uint32_t bypass_status;
+} BPMP_ABI_PACKED;
+
+/**
+ * @brief Request payload for the #MRQ_PWR_CNTRL -command
+ *
+ * | Sub-command | Request payload |
+ * |---------------------------|-----------------------------------|
+ * | #CMD_PWR_CNTRL_QUERY_ABI | #cmd_pwr_cntrl_query_abi_request |
+ * | #CMD_PWR_CNTRL_BYPASS_SET | #cmd_pwr_cntrl_bypass_set_request |
+ * | #CMD_PWR_CNTRL_BYPASS_GET | #cmd_pwr_cntrl_bypass_get_request |
+ */
+struct mrq_pwr_cntrl_request {
+ uint32_t cmd;
+ union {
+ struct cmd_pwr_cntrl_query_abi_request pwr_cntrl_query_abi_req;
+ struct cmd_pwr_cntrl_bypass_set_request pwr_cntrl_bypass_set_req;
+ struct cmd_pwr_cntrl_bypass_get_request pwr_cntrl_bypass_get_req;
+ } BPMP_UNION_ANON;
+} BPMP_ABI_PACKED;
+
+/**
+ * @brief Response payload for the #MRQ_PWR_CNTRL -command.
+ *
+ * | Sub-command | Response payload |
+ * |---------------------------|-----------------------------------|
+ * | #CMD_PWR_CNTRL_QUERY_ABI | - |
+ * | #CMD_PWR_CNTRL_BYPASS_SET | - |
+ * | #CMD_PWR_CNTRL_BYPASS_GET | #cmd_pwr_cntrl_bypass_get_response|
+ */
+struct mrq_pwr_cntrl_response {
+ union {
+ struct cmd_pwr_cntrl_bypass_get_response pwr_cntrl_bypass_get_rsp;
+ } BPMP_UNION_ANON;
+} BPMP_ABI_PACKED;
+
+/** @} Pwrcntrl */
+/** @endcond */
+
+
+/** @cond (bpmp_t264)
+ * @ingroup MRQ_Codes
+ * @def MRQ_SLC
+ * @brief Configure SLC state.
+ *
+ * * Initiators: Any
+ * * Targets: BPMP
+ * * Request Payload: @ref mrq_slc_request
+ * * Response Payload: @ref mrq_slc_response
+ *
+ * @addtogroup Slc
+ * @{
+ */
+
+/**
+ * @brief Sub-command identifiers for #MRQ_SLC.
+ */
+enum mrq_slc_cmd {
+ /**
+ * @brief Check whether the BPMP-FW supports the specified
+ * #MRQ_SLC sub-command.
+ *
+ * mrq_response::err is 0 if the specified request is
+ * supported and -#BPMP_ENODEV otherwise.
+ */
+ CMD_SLC_QUERY_ABI = 0,
+
+ /**
+ * @brief Switch SLC to/out of bypass mode
+ *
+ * mrq_response:err is defined as:
+ *
+ * | Value | Description |
+ * |----------------|---------------------------------------------|
+ * | 0 | Success |
+ * | -#BPMP_ENODEV | #MRQ_SLC is not supported by BPMP-FW. |
+ * | -#BPMP_EINVAL | Invalid request parameters. |
+ * | -#BPMP_ENOTSUP | Bypass mode is not supported. |
+ */
+ CMD_SLC_BYPASS_SET = 1,
+
+ /**
+ * @brief Get SLC bypass mode status
+ *
+ * mrq_response:err is defined as:
+ *
+ * | Value | Description |
+ * |----------------|---------------------------------------------|
+ * | 0 | Success |
+ * | -#BPMP_ENODEV | #MRQ_SLC is not supported by BPMP-FW. |
+ */
+ CMD_SLC_BYPASS_GET = 2,
+};
+
+/**
+ * @brief Request data for #MRQ_SLC sub-command #CMD_SLC_QUERY_ABI
+ */
+struct cmd_slc_query_abi_request {
+ /** @brief Sub-command identifier from @ref mrq_slc_cmd */
+ uint32_t cmd_code;
+} BPMP_ABI_PACKED;
+
+/**
+ * @brief Request data for #MRQ_SLC sub-command #CMD_SLC_BYPASS_SET
+ *
+ * Switch SLC to / out of bypass mode provided such
+ * mode is supported by the SLC.
+ */
+struct cmd_slc_bypass_set_request {
+ /**
+ * @brief Bypass setting.
+ *
+ * Valid values:
+ *
+ * * 1 to enter bypass mode,
+ * * 0 to exit bypass mode.
+ */
+ uint32_t bypass_setting;
+} BPMP_ABI_PACKED;
+
+/**
+ * @brief Response data for #MRQ_SLC sub-command #CMD_SLC_BYPASS_GET
+ *
+ * Get current bypass mode status if such mode is supported by the SLC.
+ * Otherwise, return "out of bypass" .
+ */
+struct cmd_slc_bypass_get_response {
+ /**
+ * @brief Bypass mode status: 1 SLC is in bypass,
+ * 0 SLC is out of bypass.
+ */
+ uint32_t bypass_status;
+} BPMP_ABI_PACKED;
+
+/**
+ * @brief Request payload for the #MRQ_SLC -command
+ *
+ * | Sub-command | Request payload |
+ * |---------------------------|-----------------------------------|
+ * | #CMD_SLC_QUERY_ABI | #cmd_slc_query_abi_request |
+ * | #CMD_SLC_BYPASS_SET | #cmd_slc_bypass_set_request |
+ * | #CMD_SLC_BYPASS_GET | - |
+ */
+struct mrq_slc_request {
+ uint32_t cmd;
+ union {
+ struct cmd_slc_query_abi_request slc_query_abi_req;
+ struct cmd_slc_bypass_set_request slc_bypass_set_req;
+ } BPMP_UNION_ANON;
+} BPMP_ABI_PACKED;
+
+/**
+ * @brief Response payload for the #MRQ_SLC -command.
+ *
+ * | Sub-command | Response payload |
+ * |---------------------------|-----------------------------------|
+ * | #CMD_SLC_QUERY_ABI | - |
+ * | #CMD_SLC_BYPASS_SET | - |
+ * | #CMD_SLC_BYPASS_GET | #cmd_slc_bypass_get_response |
+ */
+struct mrq_slc_response {
+ union {
+ struct cmd_slc_bypass_get_response slc_bypass_get_rsp;
+ } BPMP_UNION_ANON;
+} BPMP_ABI_PACKED;
+
+/** @} Slc */
+/** @endcond */
+
+/** @cond (bpmp_th500)
* @ingroup MRQ_Codes
* @def MRQ_GEARS
* @brief Get thresholds for NDIV offset switching
*
- * * Platforms: TH500 onwards
- * @cond bpmp_th500
* * Initiators: CCPLEX
* * Targets: BPMP
* * Request Payload: N/A
@@ -3905,11 +5443,1248 @@ struct mrq_pwr_limit_response {
*/
struct mrq_gears_response {
/** @brief number of online CPUs for each gear */
- uint32_t ncpu[16];
+ uint32_t ncpu[8];
+ /** @brief ndiv offset for each gear */
+ uint32_t ndiv_offset[8];
+ /** @brief voltage below which gears are disabled */
+ uint32_t uv_threshold;
} BPMP_ABI_PACKED;
/** @} Gears */
-/** @endcond bpmp_th500 */
+/** @endcond */
+
+
+/**
+ * @ingroup MRQ_Codes
+ * @def MRQ_SHUTDOWN
+ * @brief System shutdown
+ *
+ * This message indicates system shutdown or reboot request. BPMP will
+ * initiate system shutdown/reboot after receiving this message, it
+ * may include turning off some rails in sequence and programming
+ * PMIC.
+ *
+ * * Initiators: CPU_S, MCE
+ * * Targets: BPMP
+ * * Request Payload: @ref mrq_shutdown_request
+ * * Response Payload: N/A
+ * @addtogroup Shutdown
+ * @{
+ */
+
+/**
+ * @brief Request with #MRQ_SHUTDOWN
+ */
+struct mrq_shutdown_request {
+ /**
+ * @brief Shutdown state ID
+ *
+ * Legal values:
+ * * 0 - Power off
+ * * 1 - Reboot
+ * @cond bpmp_t264
+ * * 2 - Suspend
+ * @endcond
+ */
+ uint32_t state;
+} BPMP_ABI_PACKED;
+
+/** @} Shutdown */
+
+/** @cond (bpmp_th500 || bpmp_tb500)
+ * @defgroup bpmp_c2c_status C2C link status
+ * @addtogroup bpmp_c2c_status
+ * @{
+ */
+/** @brief initial status code */
+#define BPMP_C2C_STATUS_INIT_NOT_STARTED 0
+/** @brief Invalid speedo code */
+#define BPMP_C2C_STATUS_C2C_INVALID_SPEEDO_CODE 7
+/** @brief Invalid frequency */
+#define BPMP_C2C_STATUS_C2C_INVALID_FREQ 8
+/** @brief Invalid link */
+#define BPMP_C2C_STATUS_C2C_INVALID_LINK 9
+/** @brief refpll lock polling times out - partition 0 */
+#define BPMP_C2C_STATUS_C2C0_REFPLL_FAIL 10
+/** @brief refpll lock polling times out - partition 1 */
+#define BPMP_C2C_STATUS_C2C1_REFPLL_FAIL 11
+/** @brief PLL cal times out - partition 0 */
+#define BPMP_C2C_STATUS_C2C0_PLLCAL_FAIL 12
+/** @brief PLL cal times out - partition 1 */
+#define BPMP_C2C_STATUS_C2C1_PLLCAL_FAIL 13
+/** @brief clock detection times out - partition 0 */
+#define BPMP_C2C_STATUS_C2C0_CLKDET_FAIL 14
+/** @brief clock detection times out - partition 1 */
+#define BPMP_C2C_STATUS_C2C1_CLKDET_FAIL 15
+/** @brief Final trainings fail partition 0 */
+#define BPMP_C2C_STATUS_C2C0_TR_FAIL 16
+/** @brief Final trainings fail partition 1 */
+#define BPMP_C2C_STATUS_C2C1_TR_FAIL 17
+/** @brief C2C FW init done */
+#define NV_GFW_GLOBAL_DEVINIT_C2C_STATUS_C2C_FW_INIT_DONE 20
+/** @brief C2C FW init failed partition 0 */
+#define NV_GFW_GLOBAL_DEVINIT_C2C_STATUS_C2C0_FW_INIT_FAIL 21
+/** @brief C2C FW init failed partition 1 */
+#define NV_GFW_GLOBAL_DEVINIT_C2C_STATUS_C2C1_FW_INIT_FAIL 22
+/** @brief no failure seen, c2c init was successful */
+#define BPMP_C2C_STATUS_C2C_LINK_TRAIN_PASS 255
+/** @} bpmp_c2c_status */
+
+/**
+ * @ingroup MRQ_Codes
+ * @def MRQ_C2C
+ * @brief Control C2C partitions initialization.
+ *
+ * * Initiators: Any
+ * * Targets: BPMP
+ * * Request Payload: @ref mrq_c2c_request
+ * * Response Payload: @ref mrq_c2c_response
+ *
+ * @addtogroup C2C
+ * @{
+ */
+enum mrq_c2c_cmd {
+ /**
+ * @brief Check whether the BPMP driver supports the specified request
+ * type
+ *
+ * mrq_response:: err is 0 if the specified request is supported and
+ * -#BPMP_ENODEV otherwise
+ */
+ CMD_C2C_QUERY_ABI = 0,
+
+ /**
+ * @brief Start C2C initialization
+ *
+ * mrq_response:err is
+ * * 0: Success
+ * * -#BPMP_ENODEV: MRQ_C2C is not supported by BPMP-FW
+ * * -#BPMP_ENAVAIL: Invalid request parameters
+ * * -#BPMP_EACCES: Request is not accepted
+ */
+ CMD_C2C_START_INITIALIZATION = 1,
+
+ /**
+ * @brief Command to query current C2C training status
+ *
+ * This command will return the result of the latest C2C re-training that is initiated with
+ * MRQ_C2C.CMD_C2C_START_INITIALIZATION or MRQ_C2C.CMD_C2C_START_HOTRESET calls.
+ * If no training has been initiated yet, the command will return code BPMP_C2C_STATUS_INIT_NOT_STARTED.
+ *
+ * mrq_response:err is
+ * * 0: Success
+ * * -#BPMP_ENODEV: MRQ_C2C is not supported by BPMP-FW
+ * * -#BPMP_EACCES: Request is not accepted
+ */
+ CMD_C2C_GET_STATUS = 2,
+ /**
+ * @brief C2C hot-reset precondition
+ *
+ * mrq_response:err is
+ * * 0: Success
+ * * -#BPMP_ENODEV: MRQ_C2C is not supported by BPMP-FW
+ * * -#BPMP_ENAVAIL: Invalid request parameters
+ * * -#BPMP_EACCES: Request is not accepted
+ */
+ CMD_C2C_HOTRESET_PREP = 3,
+ /**
+ * @brief Start C2C hot-reset
+ *
+ * mrq_response:err is
+ * * 0: Success
+ * * -#BPMP_ENODEV: MRQ_C2C is not supported by BPMP-FW
+ * * -#BPMP_ENAVAIL: Invalid request parameters
+ * * -#BPMP_EACCES: Request is not accepted
+ */
+ CMD_C2C_START_HOTRESET = 4,
+
+ CMD_C2C_MAX
+};
+
+/**
+ * @brief Request data for #MRQ_C2C command CMD_C2C_QUERY_ABI
+ */
+struct cmd_c2c_query_abi_request {
+ /** @brief Command identifier to be queried */
+ uint32_t cmd;
+} BPMP_ABI_PACKED;
+
+/**
+ * @brief Request data for #MRQ_C2C command CMD_C2C_START_INITIALIZATION
+ */
+struct cmd_c2c_start_init_request {
+ /** @brief 1: partition 0; 2: partition 1; 3: partition 0 and 1; */
+ uint8_t partitions;
+} BPMP_ABI_PACKED;
+
+/**
+ * @brief Response data for #MRQ_C2C command CMD_C2C_START_INITIALIZATION
+ */
+struct cmd_c2c_start_init_response {
+ /** @brief Refer to @ref bpmp_c2c_status */
+ uint8_t status;
+} BPMP_ABI_PACKED;
+
+/**
+ * @brief Response data for #MRQ_C2C command CMD_C2C_GET_STATUS
+ */
+struct cmd_c2c_get_status_response {
+ /** @brief Refer to @ref bpmp_c2c_status */
+ uint8_t status;
+} BPMP_ABI_PACKED;
+
+/**
+ * @brief Request data for #MRQ_C2C command CMD_C2C_HOTRESET_PREP
+ */
+struct cmd_c2c_hotreset_prep_request {
+ /** @brief 1: partition 0; 2: partition 1; 3: partition 0 and 1; */
+ uint8_t partitions;
+} BPMP_ABI_PACKED;
+
+/**
+ * @brief Request data for #MRQ_C2C command CMD_C2C_START_HOTRESET
+ */
+struct cmd_c2c_start_hotreset_request {
+ /** @brief 1: partition 0; 2: partition 1; 3: partition 0 and 1; */
+ uint8_t partitions;
+} BPMP_ABI_PACKED;
+
+/**
+ * @brief Response data for #MRQ_C2C command CMD_C2C_START_HOTRESET
+ */
+struct cmd_c2c_start_hotreset_response {
+ /** @brief Refer to @ref bpmp_c2c_status */
+ uint8_t status;
+} BPMP_ABI_PACKED;
+
+/**
+ * @brief Request with #MRQ_C2C
+ *
+ * |sub-command |payload |
+ * |-----------------------------|-------------------------------|
+ * |CMD_C2C_QUERY_ABI |cmd_c2c_query_abi_request |
+ * |CMD_C2C_START_INITIALIZATION |cmd_c2c_start_init_request |
+ * |CMD_C2C_GET_STATUS | |
+ * |CMD_C2C_HOTRESET_PREP |cmd_c2c_hotreset_prep_request |
+ * |CMD_C2C_START_HOTRESET |cmd_c2c_start_hotreset_request |
+
+ */
+struct mrq_c2c_request {
+ uint32_t cmd;
+ union {
+ struct cmd_c2c_query_abi_request c2c_query_abi_req;
+ struct cmd_c2c_start_init_request c2c_start_init_req;
+ struct cmd_c2c_hotreset_prep_request c2c_hotreset_prep_req;
+ struct cmd_c2c_start_hotreset_request c2c_start_hotreset_req;
+ } BPMP_UNION_ANON;
+} BPMP_ABI_PACKED;
+
+/**
+ * @brief Response to MRQ_C2C
+ *
+ * |sub-command |payload |
+ * |-----------------------------|--------------------------------|
+ * |CMD_C2C_QUERY_ABI | |
+ * |CMD_C2C_START_INITIALIZATION |cmd_c2c_start_init_response |
+ * |CMD_C2C_GET_STATUS |cmd_c2c_get_status_response |
+ * |CMD_C2C_HOTRESET_PREP | |
+ * |CMD_C2C_START_HOTRESET |cmd_c2c_start_hotreset_response |
+ */
+struct mrq_c2c_response {
+ union {
+ struct cmd_c2c_start_init_response c2c_start_init_resp;
+ struct cmd_c2c_get_status_response c2c_get_status_resp;
+ struct cmd_c2c_start_hotreset_response c2c_start_hotreset_resp;
+ } BPMP_UNION_ANON;
+} BPMP_ABI_PACKED;
+/** @} */
+/** @endcond */
+
+
+/** @cond (bpmp_t264)
+ * @ingroup MRQ_Codes
+ * @def MRQ_PCIE
+ * @brief Perform a PCIE operation
+ *
+ * * Initiators: CCPLEX
+ * * Targets: BPMP
+ * * Request Payload: @ref mrq_pcie_request
+ *
+ * @addtogroup PCIE
+ * @{
+ */
+
+/**
+ * @brief Sub-command identifiers for #MRQ_PCIE.
+ */
+enum mrq_pcie_cmd {
+ /** @brief Initialize PCIE EP controller. */
+ CMD_PCIE_EP_CONTROLLER_INIT = 0,
+ /** @brief Disable PCIE EP controller. */
+ CMD_PCIE_EP_CONTROLLER_OFF = 1,
+
+ /** @brief Disable PCIE RP controller. */
+ CMD_PCIE_RP_CONTROLLER_OFF = 100,
+
+ CMD_PCIE_MAX,
+};
+
+/**
+ * @brief Request payload for #MRQ_PCIE sub-command #CMD_PCIE_EP_CONTROLLER_INIT.
+ */
+struct cmd_pcie_ep_controller_init_request {
+ /**
+ * @brief PCIe EP controller number.
+ * Valid entries for T264 are 2, 4 and 5.
+ */
+ uint8_t ep_controller;
+ /**
+ * @brief PCIe EP function programming interface code.
+ * Valid range in HW is [0, 0xFFU], BPMP-FW programs the input value without any check.
+ * It is up to the requester to send valid input as documented in "PCI CODE AND ID
+ * ASSIGNMENT SPECIFICATION".
+ */
+ uint8_t progif_code;
+ /**
+ * @brief PCIe EP function sub-class code.
+ * Valid range in HW is [0, 0xFFU], BPMP-FW programs the input value without any check.
+ * It is up to the requester to send valid input as documented in "PCI CODE AND ID
+ * ASSIGNMENT SPECIFICATION".
+ */
+ uint8_t subclass_code;
+ /**
+ * @brief PCIe EP function base class code.
+ * Valid range in HW is [0, 0xFFU], BPMP-FW programs the input value without any check.
+ * It is up to the requester to send valid input as documented in "PCI CODE AND ID
+ * ASSIGNMENT SPECIFICATION".
+ */
+ uint8_t baseclass_code;
+ /**
+ * @brief PCIe EP function device id.
+ * Valid range is [0, 0x7FU], only LSB 7 bits are writable in 16-bit PCI device id.
+ * Valid range check is done on input value and returns -BPMP_EINVAL on failure.
+ */
+ uint8_t deviceid;
+ /**
+ * @brief PCIe EP EP BAR1 size.
+ * Valid range is [6U, 16U], which translate to [64MB, 64GB] size.
+ * Valid range check is done on input value and returns -BPMP_EINVAL on failure.
+ */
+ uint8_t bar1_size;
+} BPMP_ABI_PACKED;
+
+/**
+ * @brief Request payload for #MRQ_PCIE sub-command #CMD_PCIE_EP_CONTROLLER_OFF.
+ */
+struct cmd_pcie_ep_controller_off_request {
+ /** @brief EP controller number, T264 valid: 2, 4, 5. */
+ uint8_t ep_controller;
+} BPMP_ABI_PACKED;
+
+/**
+ * @brief Request payload for #MRQ_PCIE sub-command #CMD_PCIE_RP_CONTROLLER_OFF.
+ */
+struct cmd_pcie_rp_controller_off_request {
+ /** @brief RP controller number, T264 valid: 1-5 */
+ uint8_t rp_controller;
+} BPMP_ABI_PACKED;
+
+/**
+ * @ingroup PCIE
+ * @brief Request payload for the #MRQ_PCIE command.
+ *
+ * Used by the sender of an #MRQ_PCIE message to control PCIE.
+ * Below table shows sub-commands with their corresponding payload data.
+ *
+ * |sub-command |payload |
+ * |--------------------------------------|-----------------------------------------|
+ * |#CMD_PCIE_EP_CONTROLLER_INIT |#cmd_pcie_ep_controller_init_request |
+ * |#CMD_PCIE_EP_CONTROLLER_OFF |#cmd_pcie_ep_controller_off_request |
+ *
+ * @cond (!bpmp_safe)
+ *
+ * The following additional MRQs are supported on non-functional-safety
+ * builds:
+ * |sub-command |payload |
+ * |--------------------------------------|-----------------------------------------|
+ * |#CMD_PCIE_RP_CONTROLLER_OFF |#cmd_pcie_rp_controller_off_request |
+ *
+ * @endcond
+ *
+ */
+struct mrq_pcie_request {
+ /** @brief Sub-command ID from @ref mrq_pcie_cmd. */
+ uint32_t cmd;
+
+ union {
+ struct cmd_pcie_ep_controller_init_request ep_ctrlr_init;
+ struct cmd_pcie_ep_controller_off_request ep_ctrlr_off;
+ /** @cond (!bpmp_safe) */
+ struct cmd_pcie_rp_controller_off_request rp_ctrlr_off;
+ /** @endcond */
+ } BPMP_UNION_ANON;
+} BPMP_ABI_PACKED;
+
+/** @} PCIE */
+/** @endcond */
+
+/** @cond (bpmp_t264)
+ * @ingroup MRQ_Codes
+ * @def MRQ_CR7
+ * @brief Perform a CR7 operation
+ *
+ * * Initiators: CPU_S
+ * * Targets: BPMP
+ * * Request Payload: @ref mrq_cr7_request
+ *
+ * @addtogroup CR7
+ * @{
+ */
+
+/**
+ * @brief Payload for #MRQ_CR7
+ * 2 fields for future parameters are provided. These must be 0 currently.
+ */
+struct cmd_cr7_request {
+ uint32_t fld0;
+ uint32_t fld1;
+} BPMP_ABI_PACKED;
+
+struct cmd_cr7_query_abi_request {
+ /** #MRQ_CR7 sub-command identifier from @ref mrq_cr7_cmd */
+ uint32_t type;
+} BPMP_ABI_PACKED;
+
+/**
+ * @brief Sub-command identifiers for #MRQ_CR7.
+ */
+enum mrq_cr7_cmd {
+ /**
+ * @brief Check whether the BPMP driver supports the specified request
+ * type
+ *
+ * mrq_response:: err is 0 if the specified request is supported and
+ * -#BPMP_ENODEV otherwise
+ */
+ CMD_CR7_QUERY_ABI = 0,
+
+ /** @brief Enter CR7 state on the package BPMP-FW is running on. */
+ CMD_CR7_ENTRY = 1,
+ /** @brief Exit CR7 state on the package BPMP-FW is running on. */
+ CMD_CR7_EXIT = 2,
+
+ CMD_CR7_MAX,
+};
+
+/**
+ * @ingroup CR7
+ * @brief #MRQ_CR7 structure
+ *
+ * |Sub-command |Payload |
+ * |----------------------------|---------------------------|
+ * |#CMD_CR7_QUERY_ABI | #cmd_cr7_query_abi_request|
+ * |#CMD_CR7_ENTRY | #cmd_cr7_request |
+ * |#CMD_CR7_EXIT | #cmd_cr7_request |
+
+ */
+struct mrq_cr7_request {
+ /** @brief Sub-command ID from @ref mrq_cr7_cmd. */
+ uint32_t cmd;
+ union {
+ struct cmd_cr7_query_abi_request query_abi;
+ struct cmd_cr7_request cr7_request;
+ } BPMP_UNION_ANON;
+} BPMP_ABI_PACKED;
+
+/** @} CR7 */
+/** @endcond */
+
+/** @cond (bpmp_tb500)
+ * @ingroup MRQ_Codes
+ * @def MRQ_HWPM
+ * @brief Configure and query HWPM functionality
+ *
+ * * Initiators: CCPLEX
+ * * Targets: BPMP
+ * * Request Payload: @ref mrq_hwpm_request
+ * * Response Payload: @ref mrq_hwpm_response
+ *
+ * @addtogroup HWPM
+ * @{
+ */
+
+/**
+ * @brief Sub-command identifiers for #MRQ_HWPM.
+ */
+enum mrq_hwpm_cmd {
+ /**
+ * @brief Check whether the BPMP-FW supports the specified
+ * #MRQ_HWPM sub-command.
+ *
+ * mrq_response:err is 0 if the specified request is
+ * supported and -#BPMP_ENODEV otherwise.
+ */
+ CMD_HWPM_QUERY_ABI = 1,
+
+ /**
+ * @brief Configure IPMU triggers
+ *
+ * mrq_response:err is defined as:
+ *
+ * | Value | Description |
+ * | -------------- | ------------------------------------------- |
+ * | 0 | Success |
+ * | -#BPMP_ENODEV | #MRQ_HWPM is not supported by BPMP-FW. |
+ * | -#BPMP_ENOTSUP | Subcommand is not supported by BPMP-FW. |
+ * | -#BPMP_EINVAL | Invalid request parameters. |
+ */
+ CMD_HWPM_IPMU_SET_TRIGGERS = 2,
+
+ /**
+ * @brief Configure IPMU payloads and shifts
+ *
+ * mrq_response:err is defined as:
+ *
+ * | Value | Description |
+ * | -------------- | ------------------------------------------- |
+ * | 0 | Success |
+ * | -#BPMP_ENODEV | #MRQ_HWPM is not supported by BPMP-FW. |
+ * | -#BPMP_ENOTSUP | Subcommand is not supported by BPMP-FW. |
+ * | -#BPMP_EINVAL | Invalid request parameters. |
+ */
+ CMD_HWPM_IPMU_SET_PAYLOADS_SHIFTS = 3,
+
+ /**
+ * @brief Get maximum number of payloads
+ *
+ * mrq_response:err is defined as:
+ *
+ * | Value | Description |
+ * | -------------- | ------------------------------------------- |
+ * | 0 | Success |
+ * | -#BPMP_ENODEV | #MRQ_HWPM is not supported by BPMP-FW. |
+ * | -#BPMP_ENOTSUP | Subcommand is not supported by BPMP-FW. |
+ */
+ CMD_HWPM_IPMU_GET_MAX_PAYLOADS = 4,
+
+ /**
+ * @brief Configure NVTHERM sample rate
+ *
+ * mrq_response:err is defined as:
+ *
+ * | Value | Description |
+ * | -------------- | ------------------------------------------- |
+ * | 0 | Success |
+ * | -#BPMP_ENODEV | #MRQ_HWPM is not supported by BPMP-FW. |
+ * | -#BPMP_ENOTSUP | Subcommand is not supported by BPMP-FW. |
+ * | -#BPMP_EINVAL | Invalid request parameters. |
+ */
+ CMD_HWPM_NVTHERM_SET_SAMPLE_RATE = 5,
+
+ /**
+ * @brief Set NVTHERM bubble interval
+ *
+ * mrq_response:err is defined as:
+ *
+ * | Value | Description |
+ * | -------------- | ------------------------------------------- |
+ * | 0 | Success |
+ * | -#BPMP_ENODEV | #MRQ_HWPM is not supported by BPMP-FW. |
+ * | -#BPMP_ENOTSUP | Subcommand is not supported by BPMP-FW. |
+ * | -#BPMP_EINVAL | Invalid request parameters. |
+ */
+ CMD_HWPM_NVTHERM_SET_BUBBLE_INTERVAL = 6,
+
+ /**
+ * @brief Configure NVTHERM DG flexible channels
+ *
+ * mrq_response:err is defined as:
+ *
+ * | Value | Description |
+ * | -------------- | ------------------------------------------- |
+ * | 0 | Success |
+ * | -#BPMP_ENODEV | #MRQ_HWPM is not supported by BPMP-FW. |
+ * | -#BPMP_ENOTSUP | Subcommand is not supported by BPMP-FW. |
+ * | -#BPMP_EINVAL | Invalid request parameters. |
+ */
+ CMD_HWPM_NVTHERM_SET_FLEX_CHANNELS = 7,
+
+ /**
+ * @brief Get ISENSE sensor name
+ *
+ * mrq_response:err is defined as:
+ *
+ * | Value | Description |
+ * | -------------- | ------------------------------------------- |
+ * | 0 | Success |
+ * | -#BPMP_ENODEV | #MRQ_HWPM is not supported by BPMP-FW. |
+ * | -#BPMP_ENOTSUP | Subcommand is not supported by BPMP-FW. |
+ * | -#BPMP_EINVAL | Invalid request parameters. |
+ */
+ CMD_HWPM_ISENSE_GET_SENSOR_NAME = 8,
+
+ /**
+ * @brief Get ISENSE sensor channel
+ *
+ * mrq_response:err is defined as:
+ *
+ * | Value | Description |
+ * | -------------- | ------------------------------------------- |
+ * | 0 | Success |
+ * | -#BPMP_ENODEV | #MRQ_HWPM is not supported by BPMP-FW. |
+ * | -#BPMP_ENOTSUP | Subcommand is not supported by BPMP-FW. |
+ * | -#BPMP_EINVAL | Invalid request parameters. |
+ */
+ CMD_HWPM_ISENSE_GET_SENSOR_CHANNEL = 9,
+
+ /**
+ * @brief Get ISENSE sensor scale factor
+ *
+ * mrq_response:err is defined as:
+ *
+ * | Value | Description |
+ * | -------------- | ------------------------------------------- |
+ * | 0 | Success |
+ * | -#BPMP_ENODEV | #MRQ_HWPM is not supported by BPMP-FW. |
+ * | -#BPMP_ENOTSUP | Subcommand is not supported by BPMP-FW. |
+ * | -#BPMP_EINVAL | Invalid request parameters. |
+ */
+ CMD_HWPM_ISENSE_GET_SENSOR_SCALE_FACTOR = 10,
+
+ /**
+ * @brief Get ISENSE sensor offset
+ *
+ * mrq_response:err is defined as:
+ *
+ * | Value | Description |
+ * | -------------- | ------------------------------------------- |
+ * | 0 | Success |
+ * | -#BPMP_ENODEV | #MRQ_HWPM is not supported by BPMP-FW. |
+ * | -#BPMP_ENOTSUP | Subcommand is not supported by BPMP-FW. |
+ * | -#BPMP_EINVAL | Invalid request parameters. |
+ * | -#BPMP_ENODATA | No sensor offset. |
+ */
+ CMD_HWPM_ISENSE_GET_SENSOR_OFFSET = 11,
+
+ /**
+ * @brief Get ISENSE sum block name
+ *
+ * mrq_response:err is defined as:
+ *
+ * | Value | Description |
+ * | -------------- | ------------------------------------------- |
+ * | 0 | Success |
+ * | -#BPMP_ENODEV | #MRQ_HWPM is not supported by BPMP-FW. |
+ * | -#BPMP_ENOTSUP | Subcommand is not supported by BPMP-FW. |
+ * | -#BPMP_EINVAL | Invalid request parameters. |
+ */
+ CMD_HWPM_ISENSE_GET_SUM_BLOCK_NAME = 12,
+
+ /**
+ * @brief Get ISENSE sum input sensor IDs
+ *
+ * mrq_response:err is defined as:
+ *
+ * | Value | Description |
+ * | -------------- | ------------------------------------------- |
+ * | 0 | Success |
+ * | -#BPMP_ENODEV | #MRQ_HWPM is not supported by BPMP-FW. |
+ * | -#BPMP_ENOTSUP | Subcommand is not supported by BPMP-FW. |
+ * | -#BPMP_EINVAL | Invalid request parameters. |
+ */
+ CMD_HWPM_ISENSE_GET_SUM_BLOCK_INPUTS = 13,
+
+ /**
+ * @brief Largest supported #MRQ_HWPM sub-command identifier + 1
+ */
+ CMD_HWPM_MAX,
+};
+
+/**
+ * @brief Request data for #MRQ_HWPM sub-command #CMD_HWPM_QUERY_ABI
+ */
+struct cmd_hwpm_query_abi_req {
+ /** @brief Sub-command identifier from @ref mrq_hwpm_cmd */
+ uint32_t cmd_code;
+} BPMP_ABI_PACKED;
+
+/**
+ * @brief Maximum array length for IPMU trigger bitmask
+ */
+#define HWPM_IPMU_TRIGGER_ARR_LEN 28U
+
+/**
+ * @brief Request data for #MRQ_HWPM sub-command #CMD_HWPM_IPMU_SET_TRIGGERS
+ */
+struct cmd_hwpm_ipmu_set_triggers_req {
+ /** @brief IPMU physical ID
+ *
+ * @note Valid range from [0, MAX_CPU_CORES), see @ref bpmp_hwpm_core_config
+ */
+ uint32_t ipmu_phys_id;
+ /** @brief Trigger bitmask, see @ref bpmp_ipmu_trigger_ids
+ *
+ * @note Setting a trigger bit will cause the associated trigger to
+ * generate an output packet from IPMU to the HWPM perfmux.
+ * @note Up to a maximum possible 896 triggers
+ */
+ uint32_t triggers[HWPM_IPMU_TRIGGER_ARR_LEN];
+} BPMP_ABI_PACKED;
+
+/**
+ * @brief Array length for IPMU payload bitmask
+ */
+#define HWPM_IPMU_PAYLOAD_ARR_LEN 26U
+
+/**
+ * @brief Array length for IPMU payload shift bitmask
+ */
+#define HWPM_IPMU_SHIFT_ARR_LEN 2U
+
+/**
+ * @brief Request data for #MRQ_HWPM sub-command #CMD_HWPM_IPMU_SET_PAYLOADS_SHIFTS
+ */
+struct cmd_hwpm_ipmu_set_payloads_shifts_req {
+ /** @brief IPMU physical ID
+ *
+ * @note Valid range from [0, MAX_CPU_CORES), see @ref bpmp_hwpm_core_config
+ */
+ uint32_t ipmu_phys_id;
+ /** @brief Payload bitmask, see @ref bpmp_ipmu_payload_ids
+ *
+ * @note Setting a payload bit will add the associated payload to the
+ * IPMU output packet.
+ * @note The maximum number of payloads is platform dependent,
+ * @see #CMD_HWPM_IPMU_GET_MAX_PAYLOADS
+ * @note To disable IPMU streaming on this instance, set all payload bits to 0.
+ * @note Up to a maximum of 832 available payloads
+ */
+ uint32_t payloads[HWPM_IPMU_PAYLOAD_ARR_LEN];
+ /**
+ * @brief Payload shift mask
+ *
+ * @note Setting the i-th shift bit will right-shift the
+ * i-th enabled payload by 1 bit.
+ * @note Up to a maximum of 64 simultaneous emitted payloads
+ */
+ uint32_t shifts[HWPM_IPMU_SHIFT_ARR_LEN];
+} BPMP_ABI_PACKED;
+
+/**
+ * @brief Request data for #MRQ_HWPM sub-command #CMD_HWPM_IPMU_GET_MAX_PAYLOADS
+ */
+struct cmd_hwpm_ipmu_get_max_payloads_req {
+ BPMP_ABI_EMPTY
+} BPMP_ABI_PACKED;
+
+/**
+ * @brief Request data for #MRQ_HWPM sub-command #CMD_HWPM_NVTHERM_SET_SAMPLE_RATE
+ */
+struct cmd_hwpm_nvtherm_set_sample_rate_req {
+ /** @brief Sample rate in microseconds
+ *
+ * @note Requesting a sample rate of 0 will disable NVTHERM streaming.
+ */
+ uint32_t sample_rate;
+} BPMP_ABI_PACKED;
+
+/**
+ * @brief Request data for #MRQ_HWPM sub-command #CMD_HWPM_NVTHERM_SET_BUBBLE_INTERVAL
+ */
+struct cmd_hwpm_nvtherm_set_bubble_interval_req {
+ /** @brief Bubble interval in microseconds */
+ uint32_t bubble_interval;
+} BPMP_ABI_PACKED;
+
+/**
+ * @brief Maximum array length for NVTHERM flexible channel bitmask
+ */
+#define HWPM_NVTHERM_FLEX_CHANNEL_ARR_LEN 29U
+
+/**
+ * @brief Request data for #MRQ_HWPM sub-command #CMD_HWPM_NVTHERM_SET_FLEX_CHANNELS
+ */
+struct cmd_hwpm_nvtherm_set_flex_channels_req {
+ /** @brief NVTHERM flexible channel bitmask
+ *
+ * @see #bpmp_nvtherm_flex_channel_ids
+ *
+ * @note Up to a maximum of 928 flexible channels
+ */
+ uint32_t channels[HWPM_NVTHERM_FLEX_CHANNEL_ARR_LEN];
+} BPMP_ABI_PACKED;
+
+/**
+ * @brief Request data for #MRQ_HWPM sub-command #CMD_HWPM_ISENSE_GET_SENSOR_NAME
+ */
+struct cmd_hwpm_isense_get_sensor_name_req {
+ /** @brief Sensor ID from @ref bpmp_isense_sensor_ids */
+ uint32_t sensor_id;
+} BPMP_ABI_PACKED;
+
+/**
+ * @brief Request data for #MRQ_HWPM sub-command #CMD_HWPM_ISENSE_GET_SENSOR_CHANNEL
+ */
+struct cmd_hwpm_isense_get_sensor_channel_req {
+ /** @brief Sensor ID from @ref bpmp_isense_sensor_ids */
+ uint32_t sensor_id;
+} BPMP_ABI_PACKED;
+
+/**
+ * @brief Request data for #MRQ_HWPM sub-command #CMD_HWPM_ISENSE_GET_SENSOR_SCALE_FACTOR
+ */
+struct cmd_hwpm_isense_get_sensor_scale_factor_req {
+ /** @brief Sensor ID from @ref bpmp_isense_sensor_ids */
+ uint32_t sensor_id;
+} BPMP_ABI_PACKED;
+
+/**
+ * @brief Request data for #MRQ_HWPM sub-command #CMD_HWPM_ISENSE_GET_SENSOR_OFFSET
+ */
+struct cmd_hwpm_isense_get_sensor_offset_req {
+ /** @brief Sensor ID from @ref bpmp_isense_sensor_ids */
+ uint32_t sensor_id;
+} BPMP_ABI_PACKED;
+
+/**
+ * @brief Request data for #MRQ_HWPM sub-command #CMD_HWPM_ISENSE_GET_SUM_BLOCK_NAME
+ */
+struct cmd_hwpm_isense_get_sum_block_name_req {
+ /** @brief Sum block index */
+ uint32_t sum_block_index;
+} BPMP_ABI_PACKED;
+
+/**
+ * @brief Request data for #MRQ_HWPM sub-command #CMD_HWPM_ISENSE_GET_SUM_BLOCK_INPUTS
+ */
+struct cmd_hwpm_isense_get_sum_block_inputs_req {
+ /** @brief Sum block index */
+ uint32_t sum_block_index;
+} BPMP_ABI_PACKED;
+
+/**
+ * @brief Response data for #MRQ_HWPM sub-command #CMD_HWPM_IPMU_GET_MAX_PAYLOADS
+ */
+struct cmd_hwpm_ipmu_get_max_payloads_resp {
+ /** @brief Maximum number of payloads */
+ uint32_t max_payloads;
+} BPMP_ABI_PACKED;
+
+/**
+ * @brief Maximum array length for ISENSE sensor name
+ */
+#define HWPM_ISENSE_SENSOR_MAX_NAME_LEN 64U
+
+/**
+ * @brief Response data for #MRQ_HWPM sub-command #CMD_HWPM_ISENSE_GET_SENSOR_NAME
+ */
+struct cmd_hwpm_isense_get_sensor_name_resp {
+ /** @brief Sensor name */
+ char sensor_name[HWPM_ISENSE_SENSOR_MAX_NAME_LEN];
+} BPMP_ABI_PACKED;
+
+/**
+ * @brief Response data for #MRQ_HWPM sub-command #CMD_HWPM_ISENSE_GET_SENSOR_CHANNEL
+ */
+struct cmd_hwpm_isense_get_sensor_channel_resp {
+ /** @brief Physical channel index */
+ uint32_t channel_index;
+} BPMP_ABI_PACKED;
+
+/**
+ * @brief Response data for #MRQ_HWPM sub-command #CMD_HWPM_ISENSE_GET_SENSOR_SCALE_FACTOR
+ */
+struct cmd_hwpm_isense_get_sensor_scale_factor_resp {
+ /** @brief Scale factor */
+ float scale_factor;
+} BPMP_ABI_PACKED;
+
+/**
+ * @brief Response data for #MRQ_HWPM sub-command #CMD_HWPM_ISENSE_GET_SENSOR_OFFSET
+ */
+struct cmd_hwpm_isense_get_sensor_offset_resp {
+ /** @brief Offset sensor ID */
+ uint32_t offset_sensor_id;
+} BPMP_ABI_PACKED;
+
+/**
+ * @brief Maximum array length for ISENSE sum name
+ */
+#define HWPM_ISENSE_SUM_BLOCK_MAX_NAME_LEN 64U
+
+/**
+ * @brief Response data for #MRQ_HWPM sub-command #CMD_HWPM_ISENSE_GET_SUM_BLOCK_NAME
+ */
+struct cmd_hwpm_isense_get_sum_block_name_resp {
+ /** @brief Sum block name */
+ char sum_block_name[HWPM_ISENSE_SUM_BLOCK_MAX_NAME_LEN];
+} BPMP_ABI_PACKED;
+
+/**
+ * @brief Maximum array length for ISENSE sum block input sensor IDs
+ */
+#define HWPM_ISENSE_SUM_BLOCK_INPUTS_MAX 16U
+
+/**
+ * @brief Response data for #MRQ_HWPM sub-command #CMD_HWPM_ISENSE_GET_SUM_BLOCK_INPUTS
+ */
+struct cmd_hwpm_isense_get_sum_block_inputs_resp {
+ /** @brief Input channel indices; negative if no input is applied */
+ int32_t input_channel_idx[HWPM_ISENSE_SUM_BLOCK_INPUTS_MAX];
+} BPMP_ABI_PACKED;
+
+/**
+ * @brief Request payload for the #MRQ_HWPM -command
+ *
+ * | Sub-command | Request payload |
+ * | ---------------------------------------- | -------------------------------------------- |
+ * | #CMD_HWPM_QUERY_ABI | #cmd_hwpm_query_abi_req |
+ * | #CMD_HWPM_IPMU_SET_TRIGGERS | #cmd_hwpm_ipmu_set_triggers_req |
+ * | #CMD_HWPM_IPMU_SET_PAYLOADS_SHIFTS | #cmd_hwpm_ipmu_set_payloads_shifts_req |
+ * | #CMD_HWPM_IPMU_GET_MAX_PAYLOADS | #cmd_hwpm_ipmu_get_max_payloads_req |
+ * | #CMD_HWPM_NVTHERM_SET_SAMPLE_RATE | #cmd_hwpm_nvtherm_set_sample_rate_req |
+ * | #CMD_HWPM_NVTHERM_SET_BUBBLE_INTERVAL | #cmd_hwpm_nvtherm_set_bubble_interval_req |
+ * | #CMD_HWPM_NVTHERM_SET_FLEX_CHANNELS | #cmd_hwpm_nvtherm_set_flex_channels_req |
+ * | #CMD_HWPM_ISENSE_GET_SENSOR_CHANNEL | #cmd_hwpm_isense_get_sensor_channel_req |
+ * | #CMD_HWPM_ISENSE_GET_SENSOR_SCALE_FACTOR | #cmd_hwpm_isense_get_sensor_scale_factor_req |
+ * | #CMD_HWPM_ISENSE_GET_SENSOR_OFFSET | #cmd_hwpm_isense_get_sensor_offset_req |
+ * | #CMD_HWPM_ISENSE_GET_SUM_BLOCK_NAME | #cmd_hwpm_isense_get_sum_block_name_req |
+ * | #CMD_HWPM_ISENSE_GET_SUM_BLOCK_INPUTS | #cmd_hwpm_isense_get_sum_block_inputs_req |
+ */
+struct mrq_hwpm_request {
+ uint32_t cmd;
+ union {
+ struct cmd_hwpm_query_abi_req query_abi;
+ struct cmd_hwpm_ipmu_set_triggers_req ipmu_set_triggers;
+ struct cmd_hwpm_ipmu_set_payloads_shifts_req ipmu_set_payloads_shifts;
+ struct cmd_hwpm_ipmu_get_max_payloads_req ipmu_get_max_payloads;
+ struct cmd_hwpm_nvtherm_set_sample_rate_req nvtherm_set_sample_rate;
+ struct cmd_hwpm_nvtherm_set_bubble_interval_req nvtherm_set_bubble_interval;
+ struct cmd_hwpm_nvtherm_set_flex_channels_req nvtherm_set_flex_channels;
+ struct cmd_hwpm_isense_get_sensor_name_req isense_get_sensor_name;
+ struct cmd_hwpm_isense_get_sensor_channel_req isense_get_sensor_channel;
+ struct cmd_hwpm_isense_get_sensor_scale_factor_req isense_get_sensor_scale_factor;
+ struct cmd_hwpm_isense_get_sensor_offset_req isense_get_sensor_offset;
+ struct cmd_hwpm_isense_get_sum_block_name_req isense_get_sum_block_name;
+ struct cmd_hwpm_isense_get_sum_block_inputs_req isense_get_sum_block_inputs;
+ } BPMP_UNION_ANON;
+} BPMP_ABI_PACKED;
+
+/**
+ * @brief Response payload for the #MRQ_HWPM -command
+ *
+ * | Sub-command | Response payload |
+ * | ---------------------------------------- | --------------------------------------------- |
+ * | #CMD_HWPM_QUERY_ABI | - |
+ * | #CMD_HWPM_IPMU_SET_TRIGGERS | - |
+ * | #CMD_HWPM_IPMU_SET_PAYLOADS_SHIFTS | - |
+ * | #CMD_HWPM_IPMU_GET_MAX_PAYLOADS | #cmd_hwpm_ipmu_get_max_payloads_resp |
+ * | #CMD_HWPM_NVTHERM_SET_SAMPLE_RATE | - |
+ * | #CMD_HWPM_NVTHERM_SET_BUBBLE_INTERVAL | - |
+ * | #CMD_HWPM_NVTHERM_SET_FLEX_CHANNELS | - |
+ * | #CMD_HWPM_ISENSE_GET_SENSOR_NAME | #cmd_hwpm_isense_get_sensor_name_resp |
+ * | #CMD_HWPM_ISENSE_GET_SENSOR_CHANNEL | #cmd_hwpm_isense_get_sensor_channel_resp |
+ * | #CMD_HWPM_ISENSE_GET_SENSOR_SCALE_FACTOR | #cmd_hwpm_isense_get_sensor_scale_factor_resp |
+ * | #CMD_HWPM_ISENSE_GET_SENSOR_OFFSET | #cmd_hwpm_isense_get_sensor_offset_resp |
+ * | #CMD_HWPM_ISENSE_GET_SUM_BLOCK_NAME | #cmd_hwpm_isense_get_sum_block_name_resp |
+ * | #CMD_HWPM_ISENSE_GET_SUM_BLOCK_INPUTS | #cmd_hwpm_isense_get_sum_block_inputs_resp |
+ */
+struct mrq_hwpm_response {
+ uint32_t err;
+ union {
+ struct cmd_hwpm_ipmu_get_max_payloads_resp ipmu_get_max_payloads;
+ struct cmd_hwpm_isense_get_sensor_name_resp isense_get_sensor_name;
+ struct cmd_hwpm_isense_get_sensor_channel_resp isense_get_sensor_channel;
+ struct cmd_hwpm_isense_get_sensor_scale_factor_resp isense_get_sensor_scale_factor;
+ struct cmd_hwpm_isense_get_sensor_offset_resp isense_get_sensor_offset;
+ struct cmd_hwpm_isense_get_sum_block_name_resp isense_get_sum_block_name;
+ struct cmd_hwpm_isense_get_sum_block_inputs_resp isense_get_sum_block_inputs;
+ } BPMP_UNION_ANON;
+} BPMP_ABI_PACKED;
+
+/** @} HWPM */
+/** @endcond */
+
+/** @cond (bpmp_tb500)
+ * @ingroup MRQ_Codes
+ * @def MRQ_DVFS
+ * @brief Configure DVFS functionality
+ *
+ * * Initiators: CCPLEX
+ * * Targets: BPMP
+ * * Request Payload: @ref mrq_dvfs_request
+ *
+ * @addtogroup DVFS
+ * @{
+ */
+
+/**
+ * @brief Sub-command identifiers for #MRQ_DVFS.
+ */
+enum mrq_dvfs_cmd {
+ /**
+ * @brief Check whether the BPMP-FW supports the specified
+ * #MRQ_DVFS sub-command.
+ *
+ * mrq_response:err is 0 if the specified request is
+ * supported and -#BPMP_ENODEV otherwise.
+ */
+ CMD_DVFS_QUERY_ABI = 1,
+
+ /**
+ * @brief Configure DVFS controller
+ *
+ * mrq_response:err is defined as:
+ *
+ * | Value | Description |
+ * | -------------- | ------------------------------------------- |
+ * | 0 | Success |
+ * | -#BPMP_ENODEV | #MRQ_DVFS is not supported by BPMP-FW. |
+ * | -#BPMP_ENOTSUP | Subcommand is not supported by BPMP-FW. |
+ * | -#BPMP_EINVAL | Invalid request parameters. |
+ */
+ CMD_DVFS_SET_CTRL_STATE = 2,
+
+ /**
+ * @brief Configure DVFS manager
+ *
+ * mrq_response:err is defined as:
+ *
+ * | Value | Description |
+ * | -------------- | ------------------------------------------- |
+ * | 0 | Success |
+ * | -#BPMP_ENODEV | #MRQ_DVFS is not supported by BPMP-FW. |
+ * | -#BPMP_ENOTSUP | Subcommand is not supported by BPMP-FW. |
+ * | -#BPMP_EINVAL | Invalid request parameters. |
+ */
+ CMD_DVFS_SET_MGR_STATE = 3,
+
+ /**
+ * @brief Largest supported #MRQ_DVFS sub-command identifier + 1
+ */
+ CMD_DVFS_MAX,
+};
+
+/**
+ * @brief Request data for #MRQ_DVFS sub-command #CMD_DVFS_QUERY_ABI
+ */
+struct cmd_dvfs_query_abi_req {
+ /** @brief Sub-command identifier from @ref mrq_dvfs_cmd */
+ uint32_t cmd_code;
+} BPMP_ABI_PACKED;
+
+struct cmd_dvfs_set_ctrl_state_req {
+ /** @brief Controller ID from @ref bpmp_dvfs_ctrl_ids */
+ uint32_t ctrl_id;
+ /** @brief Controller enable state */
+ uint32_t enable;
+} BPMP_ABI_PACKED;
+
+struct cmd_dvfs_set_mgr_state_req {
+ /** @brief Manager ID from @ref bpmp_dvfs_mgr_ids */
+ uint32_t mgr_id;
+ /** @brief Manager enable state */
+ uint32_t enable;
+} BPMP_ABI_PACKED;
+
+/**
+ * @brief Request payload for the #MRQ_DVFS -command
+ *
+ * | Sub-command | Request payload |
+ * | ---------------------------------------- | -------------------------------------------- |
+ * | #CMD_DVFS_QUERY_ABI | #cmd_dvfs_query_abi_req |
+ * | #CMD_DVFS_SET_CTRL_STATE | #cmd_dvfs_set_ctrl_state_req |
+ * | #CMD_DVFS_SET_MGR_STATE | #cmd_dvfs_set_mgr_state_req |
+ */
+struct mrq_dvfs_request {
+ uint32_t cmd;
+ union {
+ struct cmd_dvfs_query_abi_req query_abi;
+ struct cmd_dvfs_set_ctrl_state_req set_ctrl_state;
+ struct cmd_dvfs_set_mgr_state_req set_mgr_state;
+ } BPMP_UNION_ANON;
+} BPMP_ABI_PACKED;
+
+/** @} DVFS */
+/** @endcond */
+
+/** @cond (bpmp_tb500)
+ * @ingroup MRQ_Codes
+ * @def MRQ_PPP_PROFILE
+ * @brief Get power/performance profile configuration settings.
+ *
+ * * Initiators: Any
+ * * Targets: BPMP
+ * * Request Payload: @ref mrq_ppp_profile_request
+ * * Response Payload: @ref mrq_ppp_profile_response
+ *
+ * @addtogroup PPP
+ * @{
+ */
+
+/**
+ * @brief Sub-command identifiers for #MRQ_PPP_PROFILE.
+ */
+enum mrq_ppp_profile_cmd {
+ /**
+ * @brief Check whether the BPMP-FW supports the specified
+ * #MRQ_PPP_PROFILE sub-command.
+ *
+ * mrq_ppp_profile_response:err is 0 if the specified request is
+ * supported and -#BPMP_ENOTSUP otherwise.
+ */
+
+ CMD_PPP_PROFILE_QUERY_ABI = 0,
+ /**
+ * @brief Query the BPMP for the CPU core and SLC slice configuration associated
+ * with a given Power/Performance Profile (PPP).
+ *
+ * mrq_ppp_profile_response:err is defined as:
+ *
+ * | Value | Description |
+ * |----------------|------------------------------------------------|
+ * | 0 | Success |
+ * | -#BPMP_ENOTSUP | #MRQ_PPP_PROFILE is not supported by BPMP-FW. |
+ * | -#BPMP_EINVAL | Invalid request parameters. |
+ */
+ CMD_PPP_PROFILE_QUERY_MASKS = 1,
+ /**
+ * @brief Query BPMP for the CPU mask corresponding to a requested
+ * number of active CPU cores.
+ *
+ * mrq_ppp_profile_response:err is defined as:
+ *
+ * | Value | Description |
+ * |----------------|------------------------------------------------|
+ * | 0 | Success |
+ * | -#BPMP_ENOTSUP | #MRQ_PPP_PROFILE is not supported by BPMP-FW. |
+ * | -#BPMP_EINVAL | Invalid request parameters. |
+ */
+ CMD_PPP_CORE_QUERY_CPU_MASK = 2,
+ /**
+ * @brief Query BPMP-FW for the currently available Power/Performance Profiles.
+ *
+ * mrq_ppp_profile_response:err is defined as:
+ *
+ * | Value | Description |
+ * |----------------|------------------------------------------------|
+ * | 0 | Success |
+ * | -#BPMP_ENOTSUP | #MRQ_PPP_PROFILE is not supported by BPMP-FW. |
+ * | -#BPMP_EINVAL | Invalid request parameters. |
+ */
+ CMD_PPP_AVAILABLE_QUERY = 3,
+};
+
+/**
+ * @brief Request data for #MRQ_PPP_PROFILE sub-command
+ * #CMD_PPP_PROFILE_QUERY_ABI
+ */
+struct cmd_ppp_profile_query_abi_req {
+ /** @brief Sub-command identifier from @ref mrq_ppp_profile_cmd */
+ uint32_t cmd_code;
+} BPMP_ABI_PACKED;
+
+/**
+ * @brief Response data for #MRQ_PPP_PROFILE sub-command
+ * #CMD_PPP_AVAILABLE_QUERY
+ */
+struct cmd_ppp_available_query_resp {
+ /**
+ * @brief Bitmask of available profiles.
+ * Bit N = 1 ⇒ profile N is available
+ */
+ uint32_t avail_ppp_mask;
+} BPMP_ABI_PACKED;
+
+/**
+ * @brief Request data for #MRQ_PPP_PROFILE sub-command
+ * #CMD_PPP_PROFILE_QUERY_MASKS
+ */
+struct cmd_ppp_profile_query_masks_req {
+ /** @brief power/perf profile identifier */
+ uint32_t profile_id;
+} BPMP_ABI_PACKED;
+
+/**
+ * @brief Response payload for #MRQ_PPP_PROFILE sub-command
+ * #CMD_PPP_PROFILE_QUERY_MASKS
+ */
+struct cmd_ppp_profile_query_masks_resp {
+ /** @brief Enabled cores in this profile */
+ uint32_t num_active_cores;
+ /** @brief Enabled SLC slices in this profile */
+ uint32_t num_active_slcs;
+ /** @brief Number of valid words in active_core_masks array */
+ uint32_t max_num_core_words;
+ /** @brief Number of valid words in active_slc_masks array */
+ uint32_t max_num_slc_words;
+ /** @brief Enabled cores bit mask (bit N = 1 => core N enabled) */
+ uint32_t active_core_masks[8];
+ /** @brief Enabled SLC slices bit mask (bit N = 1 => SLC slice N enabled) */
+ uint32_t active_slc_masks[8];
+} BPMP_ABI_PACKED;
+
+/**
+ * @brief Request data for #MRQ_PPP_PROFILE sub-command
+ * #CMD_PPP_CORE_QUERY_CPU_MASK
+ */
+struct cmd_ppp_core_query_cpu_mask_req {
+ /** @brief Requested number of active cores */
+ uint32_t num_cores;
+} BPMP_ABI_PACKED;
+
+/**
+ * @brief Response data for #MRQ_PPP_PROFILE sub-command
+ * #CMD_PPP_CORE_QUERY_CPU_MASK
+ */
+struct cmd_ppp_core_query_cpu_mask_resp {
+ /** @brief Number of valid words in active_core_masks array */
+ uint32_t max_num_words;
+ /** @brief Enabled CPU core bitmask (bit N = 1 ⇒ core N enabled) */
+ uint32_t active_core_masks[8];
+} BPMP_ABI_PACKED;
+
+/**
+ * @brief Request payload for the #MRQ_PPP_PROFILE -command
+ *
+ * | Sub-command | Request payload |
+ * |-------------------------------|----------------------------------------|
+ * | #CMD_PPP_PROFILE_QUERY_ABI | #cmd_ppp_profile_query_abi_req |
+ * | #CMD_PPP_PROFILE_QUERY_MASKS | #cmd_ppp_profile_query_masks_req |
+ * | #CMD_PPP_CORE_QUERY_CPU_MASK | #cmd_ppp_core_query_cpu_mask_req |
+ * | #CMD_PPP_AVAILABLE_QUERY | - |
+ */
+struct mrq_ppp_profile_request {
+ /** @brief Sub-command ID from @ref mrq_ppp_profile_cmd. */
+ uint32_t cmd;
+ union {
+ struct cmd_ppp_profile_query_abi_req query_abi;
+ struct cmd_ppp_profile_query_masks_req ppp_profile_masks_req;
+ struct cmd_ppp_core_query_cpu_mask_req ppp_core_mask_req;
+ } BPMP_UNION_ANON;
+} BPMP_ABI_PACKED;
+
+/**
+ * @brief Response payload for the #MRQ_PPP_PROFILE -command.
+ *
+ * | Sub-command | Response payload |
+ * |-------------------------------|----------------------------------------|
+ * | #CMD_PPP_PROFILE_QUERY_ABI | - |
+ * | #CMD_PPP_PROFILE_QUERY_MASKS | #cmd_ppp_profile_query_masks_resp |
+ * | #CMD_PPP_CORE_QUERY_CPU_MASK | #cmd_ppp_core_query_cpu_mask_resp |
+ * | #CMD_PPP_AVAILABLE_QUERY | #cmd_ppp_available_query_resp |
+ */
+struct mrq_ppp_profile_response {
+ uint32_t err;
+ union {
+ struct cmd_ppp_profile_query_masks_resp ppp_profile_masks_resp;
+ struct cmd_ppp_core_query_cpu_mask_resp ppp_core_mask_resp;
+ struct cmd_ppp_available_query_resp ppp_avail_query_resp;
+ } BPMP_UNION_ANON;
+} BPMP_ABI_PACKED;
+
+/** @} PPP */
+/** @endcond */
/**
* @addtogroup Error_Codes
@@ -3953,6 +6728,8 @@ struct mrq_gears_response {
#define BPMP_ENOSYS 38
/** @brief Invalid slot */
#define BPMP_EBADSLT 57
+/** @brief No data */
+#define BPMP_ENODATA 61
/** @brief Invalid message */
#define BPMP_EBADMSG 77
/** @brief Operation not supported */
--
2.52.0
next prev parent reply other threads:[~2026-03-20 22:54 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-20 22:54 [PATCH v2 0/5] PCI: tegra: Add Tegra264 support Thierry Reding
2026-03-20 22:54 ` Thierry Reding [this message]
2026-03-20 22:54 ` [PATCH v2 2/5] firmware: tegra: bpmp: Add tegra_bpmp_get_with_id() function Thierry Reding
2026-03-25 2:28 ` Mikko Perttunen
2026-03-26 10:00 ` Thierry Reding
2026-03-20 22:54 ` [PATCH v2 3/5] dt-bindings: pci: Document the NVIDIA Tegra264 PCIe controller Thierry Reding
2026-03-25 1:24 ` Rob Herring (Arm)
2026-03-20 22:54 ` [PATCH v2 4/5] PCI: tegra: Add Tegra264 support Thierry Reding
2026-03-24 8:22 ` kernel test robot
2026-03-25 3:48 ` Mikko Perttunen
2026-03-26 10:45 ` Thierry Reding
2026-03-20 22:54 ` [PATCH v2 5/5] arm64: tegra: Add PCI controllers on Tegra264 Thierry Reding
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260320225443.2571920-2-thierry.reding@kernel.org \
--to=thierry.reding@kernel.org \
--cc=bhelgaas@google.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jonathanh@nvidia.com \
--cc=krzk+dt@kernel.org \
--cc=kwilczynski@kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=lpieralisi@kernel.org \
--cc=mani@kernel.org \
--cc=mperttunen@nvidia.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox