[PATCH 5/6] arm64: dts: qcom: kaanapali: add display hardware devices

[Jingyi Wang <jingyi.wang@oss.qualcomm.com>]

From: Yuanjie Yang <yuanjie.yang@oss.qualcomm.com>

Add MDSS/MDP/DSI controllers and DSI PHYs for Kaanapali. DP controllers
are not included.

Signed-off-by: Yuanjie Yang <yuanjie.yang@oss.qualcomm.com>
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/kaanapali.dtsi | 242 +++++++++++++++++++++++++++++++-
 1 file changed, 240 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/kaanapali.dtsi b/arch/arm64/boot/dts/qcom/kaanapali.dtsi
index f0de06b2c20b..bf3c6eb496e1 100644
--- a/arch/arm64/boot/dts/qcom/kaanapali.dtsi
+++ b/arch/arm64/boot/dts/qcom/kaanapali.dtsi
@@ -3,6 +3,7 @@
  * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
  */
 
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
 #include <dt-bindings/clock/qcom,kaanapali-cambistmclkcc.h>
 #include <dt-bindings/clock/qcom,kaanapali-camcc.h>
 #include <dt-bindings/clock/qcom,kaanapali-dispcc.h>
@@ -3156,6 +3157,243 @@ camcc: clock-controller@956d000 {
 			#power-domain-cells = <1>;
 		};
 
+		mdss: display-subsystem@9800000 {
+			compatible = "qcom,kaanapali-mdss";
+			reg = <0x0 0x09800000 0x0 0x1000>;
+			reg-names = "mdss";
+
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+				 <&gcc GCC_DISP_HF_AXI_CLK>,
+				 <&dispcc DISP_CC_MDSS_MDP_CLK>,
+				 <&dispcc DISP_CC_MDSS_AHB_SWI_CLK>;
+			resets = <&dispcc DISP_CC_MDSS_CORE_BCR>;
+
+			interconnects = <&mmss_noc MASTER_MDP QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
+			interconnect-names = "mdp0-mem",
+					     "cpu-cfg";
+
+			power-domains = <&dispcc DISP_CC_MDSS_CORE_GDSC>;
+
+			iommus = <&apps_smmu 0x800 0x2>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			mdss_mdp: display-controller@9801000 {
+				compatible = "qcom,kaanapali-dpu";
+				reg = <0x0 0x09801000 0x0 0x1c8000>,
+				      <0x0 0x09b16000 0x0 0x3000>;
+				reg-names = "mdp",
+					    "vbif";
+
+				interrupts-extended = <&mdss 0>;
+
+				clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+					 <&dispcc DISP_CC_MDSS_MDP_CLK>,
+					 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				clock-names = "nrt_bus",
+					      "iface",
+					      "lut",
+					      "core",
+					      "vsync";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				assigned-clock-rates = <19200000>;
+
+				operating-points-v2 = <&mdp_opp_table>;
+
+				power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						dpu_intf1_out: endpoint {
+							remote-endpoint = <&mdss_dsi0_in>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						dpu_intf2_out: endpoint {
+						};
+					};
+
+					port@2 {
+						reg = <2>;
+
+						dpu_intf0_out: endpoint {
+						};
+					};
+				};
+
+				mdp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-156000000 {
+						opp-hz = /bits/ 64 <156000000>;
+						required-opps = <&rpmhpd_opp_low_svs_d1>;
+					};
+
+					opp-207000000 {
+						opp-hz = /bits/ 64 <207000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-337000000 {
+						opp-hz = /bits/ 64 <337000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-417000000 {
+						opp-hz = /bits/ 64 <417000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-532000000 {
+						opp-hz = /bits/ 64 <532000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+
+					opp-600000000 {
+						opp-hz = /bits/ 64 <600000000>;
+						required-opps = <&rpmhpd_opp_nom_l1>;
+					};
+
+					opp-650000000 {
+						opp-hz = /bits/ 64 <650000000>;
+						required-opps = <&rpmhpd_opp_turbo>;
+					};
+				};
+			};
+
+			mdss_dsi0: dsi@9ac0000 {
+				compatible = "qcom,kaanapali-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+				reg = <0x0 0x09ac0000 0x0 0x1000>;
+				reg-names = "dsi_ctrl";
+
+				interrupts-extended = <&mdss 4>;
+
+				clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+					 <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+					 <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&gcc GCC_DISP_HF_AXI_CLK>,
+					 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>,
+					 <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+					 <&dispcc DISP_CC_ESYNC0_CLK>,
+					 <&dispcc DISP_CC_OSC_CLK>,
+					 <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+					 <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus",
+					      "dsi_pll_pixel",
+					      "dsi_pll_byte",
+					      "esync",
+					      "osc",
+					      "byte_src",
+					      "pixel_src";
+
+				operating-points-v2 = <&mdss_dsi_opp_table>;
+
+				power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+				phys = <&mdss_dsi0_phy>;
+				phy-names = "dsi";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mdss_dsi0_in: endpoint {
+							remote-endpoint = <&dpu_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mdss_dsi0_out: endpoint {
+						};
+					};
+				};
+
+				mdss_dsi_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-187500000 {
+						opp-hz = /bits/ 64 <187500000>;
+						required-opps = <&rpmhpd_opp_low_svs_d1>;
+					};
+
+					opp-250000000 {
+						opp-hz = /bits/ 64 <250000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-312500000 {
+						opp-hz = /bits/ 64 <312500000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-358000000 {
+						opp-hz = /bits/ 64 <358000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+				};
+			};
+
+			mdss_dsi0_phy: phy@9ac1000 {
+				compatible = "qcom,kaanapali-dsi-phy-3nm";
+				reg = <0x0 0x09ac1000 0x0 0x1cc>,
+				      <0x0 0x09ac1200 0x0 0x280>,
+				      <0x0 0x09ac1500 0x0 0x400>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmhcc RPMH_CXO_CLK>;
+				clock-names = "iface",
+					      "ref";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				status = "disabled";
+			};
+		};
+
 		dispcc: clock-controller@9ba2000 {
 			compatible = "qcom,kaanapali-dispcc";
 			reg = <0x0 0x09ba2000 0x0 0x20000>;
@@ -3171,8 +3409,8 @@ dispcc: clock-controller@9ba2000 {
 				 <0>,
 				 <0>,
 				 <0>,
-				 <0>,
-				 <0>,
+				 <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>,
 				 <0>,
 				 <0>;
 

-- 
2.25.1