[PATCH v3 0/2] drm/panel: Add panel driver for ChipWealth CH13726A based panels

[PATCH v3 0/2] drm/panel: Add panel driver for ChipWealth CH13726A based panels

[Aaron Kling via B4 Relay]

This driver is based on the one by Teguh Sobirin [0], cut down to only
support the AYN Thor bottom panel.

Due to [1], the AYN vendor description patch has been folded into the
AYN QCS8550 dt series. Which means this series now depends on said
series and it must be picked up before this.

[0] https://github.com/AYNTechnologies/linux/commit/d0ff75b09e66023c5f88992706dee4601aa7a437
[1] https://lore.kernel.org/linux-arm-msm/c7fb3f89-6574-4761-9ef2-2fdf6d4801b5@kernel.org

Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
---
Changes in v3:
- Reword patch 1 commit message for clarity
- Order properties properly in patch 1
- Track vendor description dependency series change
- Link to v2: https://lore.kernel.org/r/20260317-ch13726a-v2-0-28aa46bcd6d0@gmail.com

Changes in v2:
- Add Neil Armstrong to binding maintainer list
- Add 120hz mode, which required a minor restructure of the driver
- Link to v1: https://lore.kernel.org/r/20260222-ch13726a-v1-0-e501d78e105a@gmail.com

---
Aaron Kling (1):
      dt-bindings: display: panel: Add ChipWealth CH13726A AMOLED driver

Teguh Sobirin (1):
      drm/panel: Add panel driver for ChipWealth CH13726A based panels

 .../display/panel/chipwealth,ch13726a.yaml         |  65 ++++
 drivers/gpu/drm/panel/Kconfig                      |  11 +
 drivers/gpu/drm/panel/Makefile                     |   1 +
 drivers/gpu/drm/panel/panel-chipwealth-ch13726a.c  | 339 +++++++++++++++++++++
 4 files changed, 416 insertions(+)
---
base-commit: 785f0eb2f85decbe7c1ef9ae922931f0194ffc2e
change-id: 20260220-ch13726a-59c6678d53d8
prerequisite-change-id: 20260217-ayn-qcs8550-16c07b63de26:v4
prerequisite-patch-id: 042cab8f04748207ba5395dd0f23c445955aaa2b
prerequisite-patch-id: 4e13275bfaa4f838a627fe8dfa3d4cb8972fc5b4
prerequisite-patch-id: 16c130bcfd7c787b91e828b8e600bd0d740f937e
prerequisite-patch-id: 4b7e6b017349c386f54e221790da4392fe066ff3
prerequisite-patch-id: 3844bef2eda3cf59031b1d131eb6ba9295629bb4
prerequisite-patch-id: bcb261e40f0386b91a09eb4080cbdf74d21f3df2

Best regards,
-- 
Aaron Kling <webgeek1234@gmail.com>

[PATCH v3 1/2] dt-bindings: display: panel: Add ChipWealth CH13726A AMOLED driver

[Aaron Kling via B4 Relay]

From: Aaron Kling <webgeek1234@gmail.com>

The Chip Wealth Technology CH13726A AMOLED driver is a single chip
solution for MIPI-DSI. This is used for the AYN Thor bottom panel.

Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
---
 .../display/panel/chipwealth,ch13726a.yaml         | 65 ++++++++++++++++++++++
 1 file changed, 65 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/panel/chipwealth,ch13726a.yaml b/Documentation/devicetree/bindings/display/panel/chipwealth,ch13726a.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..5d964900795653401a871994bcf6403cdeaad64f
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/chipwealth,ch13726a.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/chipwealth,ch13726a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Chip Wealth Technology CH13726A AMOLED driver
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+description:
+  Chip Wealth Technology CH13726A is a single-chip solution
+  for AMOLED connected using a MIPI-DSI video interface.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: ayntec,thor-panel-bottom
+
+  reg:
+    maxItems: 1
+    description: DSI virtual channel
+
+  vdd-supply: true
+  vddio-supply: true
+  vdd1v2-supply: true
+  avdd-supply: true
+
+  port: true
+  reset-gpios: true
+  rotation: true
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+  - vddio-supply
+  - vdd1v2-supply
+  - avdd-supply
+  - reset-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "ayntec,thor-panel-bottom";
+            reg = <0>;
+            vdd1v2-supply = <&vreg_l11b_1p2>;
+            vddio-supply = <&vdd_disp_1v8>;
+            vdd-supply = <&vreg_l13b_3p0>;
+            avdd-supply = <&vdd_disp2_2v8>;
+            reset-gpios = <&tlmm 133 GPIO_ACTIVE_HIGH>;
+        };
+    };
+
+...

-- 
2.53.0

Re: [PATCH v3 1/2] dt-bindings: display: panel: Add ChipWealth CH13726A AMOLED driver

[Krzysztof Kozlowski]

On Mon, Mar 23, 2026 at 12:08:32PM -0500, Aaron Kling wrote:
> The Chip Wealth Technology CH13726A AMOLED driver is a single chip
> solution for MIPI-DSI. This is used for the AYN Thor bottom panel.
> 
> Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
> ---
>  .../display/panel/chipwealth,ch13726a.yaml         | 65 ++++++++++++++++++++++
>  1 file changed, 65 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/display/panel/chipwealth,ch13726a.yaml b/Documentation/devicetree/bindings/display/panel/chipwealth,ch13726a.yaml
> new file mode 100644
> index 0000000000000000000000000000000000000000..5d964900795653401a871994bcf6403cdeaad64f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/panel/chipwealth,ch13726a.yaml
> @@ -0,0 +1,65 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/panel/chipwealth,ch13726a.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Chip Wealth Technology CH13726A AMOLED driver
> +
> +maintainers:
> +  - Neil Armstrong <neil.armstrong@linaro.org>
> +
> +description:
> +  Chip Wealth Technology CH13726A is a single-chip solution
> +  for AMOLED connected using a MIPI-DSI video interface.

Here you describe the hardware, including what I asked last time -
explain why this is ayntec thor panel, but not chipwealth,ch13726a.

Then also name the file as the compatible. If you do not know the part
(model?) number, then why do you think filename should be called
ch13726a?

Best regards,
Krzysztof

Re: [PATCH v3 1/2] dt-bindings: display: panel: Add ChipWealth CH13726A AMOLED driver

[Aaron Kling]

On Tue, Mar 24, 2026 at 4:08 AM Krzysztof Kozlowski <krzk@kernel.org> wrote:
>
> On Mon, Mar 23, 2026 at 12:08:32PM -0500, Aaron Kling wrote:
> > The Chip Wealth Technology CH13726A AMOLED driver is a single chip
> > solution for MIPI-DSI. This is used for the AYN Thor bottom panel.
> >
> > Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
> > ---
> >  .../display/panel/chipwealth,ch13726a.yaml         | 65 ++++++++++++++++++++++
> >  1 file changed, 65 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/display/panel/chipwealth,ch13726a.yaml b/Documentation/devicetree/bindings/display/panel/chipwealth,ch13726a.yaml
> > new file mode 100644
> > index 0000000000000000000000000000000000000000..5d964900795653401a871994bcf6403cdeaad64f
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/display/panel/chipwealth,ch13726a.yaml
> > @@ -0,0 +1,65 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/display/panel/chipwealth,ch13726a.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Chip Wealth Technology CH13726A AMOLED driver
> > +
> > +maintainers:
> > +  - Neil Armstrong <neil.armstrong@linaro.org>
> > +
> > +description:
> > +  Chip Wealth Technology CH13726A is a single-chip solution
> > +  for AMOLED connected using a MIPI-DSI video interface.
>
> Here you describe the hardware, including what I asked last time -
> explain why this is ayntec thor panel, but not chipwealth,ch13726a.
>
> Then also name the file as the compatible. If you do not know the part
> (model?) number, then why do you think filename should be called
> ch13726a?

The vendor source release for the AYN Thor calls the 'panel' ch13726a,
but per the data sheet for said part, it's a chip used in various
panels, not a panel itself. The handling for various panels using this
chip will share a lot of similarities since the chip is what the
kernel driver will talk to. The alternative would be having separate
drivers and bindings for every panel that will be mostly duplicated.
This is the case for multiple things supported in the kernel already,
such as the vtdr6130 which is currently described as a unique panel
but is in fact the part number for a ddic. And I will need to refactor
that for another device I have in the pipeline. In fact, all the
device panels I need to submit in this context reference ddic's and
not unique panel models. I'm waiting to see what gets approved for
this series before sending the rest of those in.

If I add something to the description like 'This chip is not a panel
itself, but is used to control various panels', would that be
sufficient? Or does the kernel need a new way to describe ddic's
separately from panels, since this seems to be common now?

Aaron

[PATCH v3 2/2] drm/panel: Add panel driver for ChipWealth CH13726A based panels

[Aaron Kling via B4 Relay]

From: Teguh Sobirin <teguh@sobir.in>

This is used by the AYN Thor for the bottom panel.

Signed-off-by: Teguh Sobirin <teguh@sobir.in>
Co-developed-by: Aaron Kling <webgeek1234@gmail.com>
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
---
 drivers/gpu/drm/panel/Kconfig                     |  11 +
 drivers/gpu/drm/panel/Makefile                    |   1 +
 drivers/gpu/drm/panel/panel-chipwealth-ch13726a.c | 339 ++++++++++++++++++++++
 3 files changed, 351 insertions(+)

diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
index a99f2e2a49fe66a09c6f2d503f570b05a5e228b1..e953b61a819082866b93d0a453ee750a76d70c18 100644
--- a/drivers/gpu/drm/panel/Kconfig
+++ b/drivers/gpu/drm/panel/Kconfig
@@ -105,6 +105,17 @@ config DRM_PANEL_BOE_TV101WUM_LL2
 	  Say Y here if you want to support for BOE TV101WUM-LL2
 	  WUXGA PANEL DSI Video Mode panel
 
+config DRM_PANEL_CHIPWEALTH_CH13726A
+	tristate "CHIPWEALTH CH13726A-based DSI panel"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	depends on BACKLIGHT_CLASS_DEVICE
+	select DRM_DISPLAY_DP_HELPER
+	select DRM_DISPLAY_HELPER
+	help
+	  Say Y here if you want to enable support for ChipWealth
+	  CH13726A-based display panels.
+
 config DRM_PANEL_EBBG_FT8719
 	tristate "EBBG FT8719 panel driver"
 	depends on OF
diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
index 3336a2c0cd86419b6a22f74dcde6df966a311da9..85da2eb5a5c664d4302837f52e7e10ec11da8966 100644
--- a/drivers/gpu/drm/panel/Makefile
+++ b/drivers/gpu/drm/panel/Makefile
@@ -9,6 +9,7 @@ obj-$(CONFIG_DRM_PANEL_BOE_TD4320) += panel-boe-td4320.o
 obj-$(CONFIG_DRM_PANEL_BOE_TH101MB31UIG002_28A) += panel-boe-th101mb31ig002-28a.o
 obj-$(CONFIG_DRM_PANEL_BOE_TV101WUM_LL2) += panel-boe-tv101wum-ll2.o
 obj-$(CONFIG_DRM_PANEL_BOE_TV101WUM_NL6) += panel-boe-tv101wum-nl6.o
+obj-$(CONFIG_DRM_PANEL_CHIPWEALTH_CH13726A) += panel-chipwealth-ch13726a.o
 obj-$(CONFIG_DRM_PANEL_DSI_CM) += panel-dsi-cm.o
 obj-$(CONFIG_DRM_PANEL_LVDS) += panel-lvds.o
 obj-$(CONFIG_DRM_PANEL_SIMPLE) += panel-simple.o
diff --git a/drivers/gpu/drm/panel/panel-chipwealth-ch13726a.c b/drivers/gpu/drm/panel/panel-chipwealth-ch13726a.c
new file mode 100644
index 0000000000000000000000000000000000000000..48a5e20e07c48748e073f8bb9147036c18c51caa
--- /dev/null
+++ b/drivers/gpu/drm/panel/panel-chipwealth-ch13726a.c
@@ -0,0 +1,339 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * ChipWealth CH13726A MIPI-DSI panel driver
+ * Copyright (c) 2024, Teguh Sobirin <teguh@sobir.in>.
+ */
+
+#include <linux/backlight.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/regulator/consumer.h>
+
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_modes.h>
+#include <drm/drm_panel.h>
+
+#include <video/mipi_display.h>
+
+struct ch13726a_panel {
+	struct drm_panel panel;
+	struct mipi_dsi_device *dsi;
+	struct regulator_bulk_data supplies[4];
+	struct gpio_desc *reset_gpio;
+	struct ch13726a_desc *desc;
+	enum drm_panel_orientation orientation;
+	bool prepared;
+};
+
+struct ch13726a_desc {
+	unsigned int width_mm;
+	unsigned int height_mm;
+	unsigned int bpc;
+
+	const struct drm_display_mode *modes;
+	unsigned int num_modes;
+};
+
+static inline struct ch13726a_panel *to_ch13726a_panel(struct drm_panel *panel)
+{
+	return container_of(panel, struct ch13726a_panel, panel);
+}
+
+static void ch13726a_reset(struct ch13726a_panel *ctx)
+{
+	gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+	usleep_range(10000, 11000);
+	gpiod_set_value_cansleep(ctx->reset_gpio, 0);
+	usleep_range(10000, 11000);
+	gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+	usleep_range(10000, 11000);
+}
+
+static int ch13726a_on(struct ch13726a_panel *ctx)
+{
+	struct mipi_dsi_multi_context dsi_ctx = { .dsi = ctx->dsi };
+
+	ctx->dsi->mode_flags |= MIPI_DSI_MODE_LPM;
+
+	mipi_dsi_generic_write_seq_multi(&dsi_ctx, 0xf0, 0x50);
+	mipi_dsi_generic_write_seq_multi(&dsi_ctx, 0xb9, 0x00);
+
+	mipi_dsi_dcs_exit_sleep_mode_multi(&dsi_ctx);
+
+	mipi_dsi_dcs_set_display_on_multi(&dsi_ctx);
+
+	return dsi_ctx.accum_err;
+}
+
+static int ch13726a_disable(struct drm_panel *panel)
+{
+	struct ch13726a_panel *ctx = to_ch13726a_panel(panel);
+	struct mipi_dsi_multi_context dsi_ctx = { .dsi = ctx->dsi };
+
+	ctx->dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
+
+	mipi_dsi_dcs_set_display_off_multi(&dsi_ctx);
+	mipi_dsi_msleep(&dsi_ctx, 50);
+	mipi_dsi_dcs_enter_sleep_mode_multi(&dsi_ctx);
+
+	return dsi_ctx.accum_err;
+}
+
+static int ch13726a_prepare(struct drm_panel *panel)
+{
+	struct ch13726a_panel *ctx = to_ch13726a_panel(panel);
+	struct device *dev = &ctx->dsi->dev;
+	int ret;
+
+	if (ctx->prepared)
+		return 0;
+
+	ret = regulator_bulk_enable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
+	if (ret < 0) {
+		dev_err(dev, "Failed to enable regulators: %d\n", ret);
+		return ret;
+	}
+
+	ch13726a_reset(ctx);
+
+	ret = ch13726a_on(ctx);
+	if (ret < 0) {
+		dev_err(dev, "Failed to initialize panel: %d\n", ret);
+		gpiod_set_value_cansleep(ctx->reset_gpio, 0);
+		regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
+		return ret;
+	}
+
+	msleep(28);
+
+	ctx->prepared = true;
+
+	return 0;
+}
+
+static int ch13726a_unprepare(struct drm_panel *panel)
+{
+	struct ch13726a_panel *ctx = to_ch13726a_panel(panel);
+
+	if (!ctx->prepared)
+		return 0;
+
+	gpiod_set_value_cansleep(ctx->reset_gpio, 0);
+	regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
+
+	ctx->prepared = false;
+	return 0;
+}
+
+static const struct drm_display_mode thor_bottom_modes[] = {
+	{
+		/* 120Hz */
+		.clock = (1080 + 28 + 4 + 36) * (1240 + 16 + 4 + 8) * 120 / 1000,
+		.hdisplay = 1080,
+		.hsync_start = 1080 + 28,
+		.hsync_end = 1080 + 28 + 4,
+		.htotal = 1080 + 28 + 4 + 36,
+		.vdisplay = 1240,
+		.vsync_start = 1240 + 16,
+		.vsync_end = 1240 + 16 + 4,
+		.vtotal = 1240 + 16 + 4 + 8,
+	},
+	{
+		/* 60Hz */
+		.clock = (1080 + 28 + 4 + 36) * (1240 + 16 + 4 + 8) * 60 / 1000,
+		.hdisplay = 1080,
+		.hsync_start = 1080 + 28,
+		.hsync_end = 1080 + 28 + 4,
+		.htotal = 1080 + 28 + 4 + 36,
+		.vdisplay = 1240,
+		.vsync_start = 1240 + 16,
+		.vsync_end = 1240 + 16 + 4,
+		.vtotal = 1240 + 16 + 4 + 8,
+	}
+};
+
+static struct ch13726a_desc thor_bottom_desc = {
+	.modes = thor_bottom_modes,
+	.num_modes = ARRAY_SIZE(thor_bottom_modes),
+	.width_mm = 65,
+	.height_mm = 75,
+	.bpc = 8,
+};
+
+static int ch13726a_get_modes(struct drm_panel *panel,
+					struct drm_connector *connector)
+{
+	struct ch13726a_panel *ctx = to_ch13726a_panel(panel);
+
+	for (uint8_t i = 0; i < ctx->desc->num_modes; i++) {
+		const struct drm_display_mode *m = &ctx->desc->modes[i];
+		struct drm_display_mode *mode;
+
+		mode = drm_mode_duplicate(connector->dev, m);
+		if (!mode) {
+			dev_err(&ctx->dsi->dev, "failed to add mode %ux%u@%u\n",
+				m->hdisplay, m->vdisplay, drm_mode_vrefresh(m));
+			return -ENOMEM;
+		}
+
+		mode->type = DRM_MODE_TYPE_DRIVER;
+		if (i == 0)
+			mode->type |= DRM_MODE_TYPE_PREFERRED;
+
+		drm_mode_set_name(mode);
+		drm_mode_probed_add(connector, mode);
+	}
+
+	connector->display_info.width_mm = ctx->desc->width_mm;
+	connector->display_info.height_mm = ctx->desc->height_mm;
+	connector->display_info.bpc = ctx->desc->bpc;
+
+	return ctx->desc->num_modes;
+}
+
+static enum drm_panel_orientation ch13726a_get_orientation(struct drm_panel *panel)
+{
+	struct ch13726a_panel *ctx = to_ch13726a_panel(panel);
+
+	return ctx->orientation;
+}
+
+static const struct drm_panel_funcs ch13726a_panel_funcs = {
+	.prepare = ch13726a_prepare,
+	.unprepare = ch13726a_unprepare,
+	.disable = ch13726a_disable,
+	.get_modes = ch13726a_get_modes,
+	.get_orientation = ch13726a_get_orientation,
+};
+
+static int ch13726a_bl_update_status(struct backlight_device *bl)
+{
+	struct mipi_dsi_device *dsi = bl_get_data(bl);
+	u16 brightness = backlight_get_brightness(bl);
+	int ret;
+
+	dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
+
+	ret = mipi_dsi_dcs_set_display_brightness(dsi, brightness);
+	if (ret < 0)
+		return ret;
+
+	dsi->mode_flags |= MIPI_DSI_MODE_LPM;
+
+	return 0;
+}
+
+static const struct backlight_ops ch13726a_bl_ops = {
+	.update_status = ch13726a_bl_update_status,
+};
+
+static struct backlight_device *
+ch13726a_create_backlight(struct mipi_dsi_device *dsi)
+{
+	struct device *dev = &dsi->dev;
+	const struct backlight_properties props = {
+		.type = BACKLIGHT_RAW,
+		.brightness = 255,
+		.max_brightness = 255,
+	};
+
+	return devm_backlight_device_register(dev, dev_name(dev), dev, dsi,
+					      &ch13726a_bl_ops, &props);
+}
+
+static int ch13726a_probe(struct mipi_dsi_device *dsi)
+{
+	struct device *dev = &dsi->dev;
+	struct ch13726a_panel *ctx;
+	int ret;
+
+	ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
+	if (!ctx)
+		return -ENOMEM;
+
+	ctx->desc = (struct ch13726a_desc *)of_device_get_match_data(dev);
+	if (!ctx->desc)
+		return -ENODEV;
+
+	ctx->supplies[0].supply = "vdd1v2";
+	ctx->supplies[1].supply = "vddio";
+	ctx->supplies[2].supply = "vdd";
+	ctx->supplies[3].supply = "avdd";
+
+	ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(ctx->supplies),
+				      ctx->supplies);
+	if (ret < 0)
+		return dev_err_probe(dev, ret, "Failed to get regulators\n");
+
+	ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
+	if (IS_ERR(ctx->reset_gpio))
+		return dev_err_probe(dev, PTR_ERR(ctx->reset_gpio),
+				     "Failed to get reset-gpios\n");
+
+	ret = of_drm_get_panel_orientation(dev->of_node, &ctx->orientation);
+	if (ret < 0) {
+		dev_err(dev, "%pOF: failed to get orientation %d\n", dev->of_node, ret);
+		return ret;
+	}
+
+	ctx->dsi = dsi;
+	mipi_dsi_set_drvdata(dsi, ctx);
+
+	dsi->lanes = 4;
+	dsi->format = MIPI_DSI_FMT_RGB888;
+	dsi->mode_flags = MIPI_DSI_MODE_VIDEO |
+			  MIPI_DSI_CLOCK_NON_CONTINUOUS;
+
+	drm_panel_init(&ctx->panel, dev, &ch13726a_panel_funcs,
+		       DRM_MODE_CONNECTOR_DSI);
+	ctx->panel.prepare_prev_first = true;
+
+	ctx->panel.backlight = ch13726a_create_backlight(dsi);
+	if (IS_ERR(ctx->panel.backlight))
+		return dev_err_probe(dev, PTR_ERR(ctx->panel.backlight),
+				     "Failed to create backlight\n");
+
+	drm_panel_add(&ctx->panel);
+
+	ret = mipi_dsi_attach(dsi);
+	if (ret < 0) {
+		dev_err(dev, "Failed to attach to DSI host: %d\n", ret);
+		drm_panel_remove(&ctx->panel);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void ch13726a_remove(struct mipi_dsi_device *dsi)
+{
+	struct ch13726a_panel *ctx = mipi_dsi_get_drvdata(dsi);
+	int ret;
+
+	ret = mipi_dsi_detach(dsi);
+	if (ret < 0)
+		dev_err(&dsi->dev, "Failed to detach from DSI host: %d\n", ret);
+
+	drm_panel_remove(&ctx->panel);
+}
+
+static const struct of_device_id ch13726a_of_match[] = {
+	{ .compatible = "ayntec,thor-panel-bottom", .data = &thor_bottom_desc },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, ch13726a_of_match);
+
+static struct mipi_dsi_driver ch13726a_driver = {
+	.probe = ch13726a_probe,
+	.remove = ch13726a_remove,
+	.driver = {
+		.name = "panel-ch13726a-amoled",
+		.of_match_table = ch13726a_of_match,
+	},
+};
+module_mipi_dsi_driver(ch13726a_driver);
+
+MODULE_DESCRIPTION("DRM driver for CH13726A DSI panels");
+MODULE_LICENSE("GPL");

-- 
2.53.0