Devicetree
 help / color / mirror / Atom feed
From: Sibi Sankar <sibi.sankar@oss.qualcomm.com>
To: robh@kernel.org, srini@kernel.org, amahesh@qti.qualcomm.com,
	krzk+dt@kernel.org, conor+dt@kernel.org, andersson@kernel.org,
	konradybcio@kernel.org
Cc: linux-arm-msm@vger.kernel.org, dri-devel@lists.freedesktop.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH V6 0/5] Enable ADSP and CDSP for Glymur SoC
Date: Wed, 25 Mar 2026 09:23:33 +0530	[thread overview]
Message-ID: <20260325035338.1393287-1-sibi.sankar@oss.qualcomm.com> (raw)

From: Sibi Sankar <quic_sibis@quicinc.com>

Qualcomm Glymur SoC variants predominantly boot Linux at EL2. This means
that the firmware streams of the remote processors are managed in kernel
and not in Gunyah hypervisor. Given that the Peripheral Image Loader for
Qualcomm SoCs now support running Linux Host at EL2 [1], this series
documents and enables ADSP and CDSP on Qualcomm Glymur SoCs with its
fastrpc nodes. A few variants of the SoC are expected to run Linux at EL1
hence the iommus properties are left optional.

[1] - https://lore.kernel.org/all/20260105-kvmrprocv10-v10-0-022e96815380@oss.qualcomm.com/

Changes in v6:
- Pick the audio series up. [Srini]
- Pickup Rbs from the list.
- Rebase on top of the lastest linux-next.
- Fix up address size and other misc fixes. [Konrad]
- Fix the ordering the various audio nodes. [Sibi]
- Link to v5: https://lore.kernel.org/lkml/20260313120814.1312410-1-sibi.sankar@oss.qualcomm.com/
- Link to v0 audio series: https://lore.kernel.org/lkml/20260311124230.2241781-1-srinivas.kandagatla@oss.qualcomm.com/

Changes in v5:
- Fix commit messages (patch 1/2) to accurately describe compatibility [Krzysztof]
- Link to v4: https://lore.kernel.org/lkml/20260310033617.3108675-1-sibi.sankar@oss.qualcomm.com/

Changes in v4:
- Fix SID used in ADSP/CDSP for correctness [Konrad]
- Link to v3: https://lore.kernel.org/lkml/20260129001358.770053-1-sibi.sankar@oss.qualcomm.com/

Changes in v3:
- A few variants of the SoC are expected to run Linux at EL1 hence the
  iommus properties are left optional.
- Add fastrpc bindings and nodes.
- Link to v2: https://lore.kernel.org/all/20251029-knp-remoteproc-v2-0-6c81993b52ea@oss.qualcomm.com/

Changes in v2:
- Combined into Kaanapali series since they are fully compatible.
- Link to v1: https://lore.kernel.org/all/20250924183726.509202-1-sibi.sankar@oss.qualcomm.com/

Sibi Sankar (3):
  dt-bindings: misc: qcom,fastrpc: Add compatible for Glymur
  arm64: dts: qcom: glymur: Add ADSP and CDSP for Glymur SoC
  arm64: dts: qcom: glymur-crd: Enable ADSP and CDSP

Srinivas Kandagatla (2):
  arm64: dts: glymur: Add LPASS macro codecs and pinctrl
  arm64: dts: qcom: glymur-crd: add Audio sound card node

 .../bindings/misc/qcom,fastrpc.yaml           |  11 +-
 arch/arm64/boot/dts/qcom/glymur-crd.dtsi      | 124 ++++
 arch/arm64/boot/dts/qcom/glymur.dtsi          | 549 ++++++++++++++++++
 3 files changed, 681 insertions(+), 3 deletions(-)


base-commit: 85964cdcad0fac9a0eb7b87a0f9d88cc074b854c
-- 
2.34.1


             reply	other threads:[~2026-03-25  3:53 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-03-25  3:53 Sibi Sankar [this message]
2026-03-25  3:53 ` [PATCH V6 1/5] dt-bindings: misc: qcom,fastrpc: Add compatible for Glymur Sibi Sankar
2026-03-25  3:53 ` [PATCH V6 2/5] arm64: dts: qcom: glymur: Add ADSP and CDSP for Glymur SoC Sibi Sankar
2026-03-25  3:53 ` [PATCH V6 3/5] arm64: dts: qcom: glymur-crd: Enable ADSP and CDSP Sibi Sankar
2026-03-25  3:53 ` [PATCH V6 4/5] arm64: dts: glymur: Add LPASS macro codecs and pinctrl Sibi Sankar
2026-03-25 11:21   ` Konrad Dybcio
2026-05-11  2:41   ` Sibi Sankar
2026-03-25  3:53 ` [PATCH V6 5/5] arm64: dts: qcom: glymur-crd: add Audio sound card node Sibi Sankar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260325035338.1393287-1-sibi.sankar@oss.qualcomm.com \
    --to=sibi.sankar@oss.qualcomm.com \
    --cc=amahesh@qti.qualcomm.com \
    --cc=andersson@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=konradybcio@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh@kernel.org \
    --cc=srini@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox