[PATCH V3 9/9] arm64: dts: rockchip: Add icm42607p IMU for RG-DS

[Chris Morgan <macroalpha82@gmail.com>]

From: Chris Morgan <macromorgan@hotmail.com>

Add the Invensense ICM42607P IMU for the Anbernic RG-DS. Mount-matrix
was tested with iio-sensor-proxy and reports correct orientation.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
---
 .../dts/rockchip/rk3568-anbernic-rg-ds.dts    | 20 ++++++++++++++++++-
 1 file changed, 19 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3568-anbernic-rg-ds.dts b/arch/arm64/boot/dts/rockchip/rk3568-anbernic-rg-ds.dts
index 44de35bcd001..834d2c940810 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-anbernic-rg-ds.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-anbernic-rg-ds.dts
@@ -872,7 +872,18 @@ aw87391_pa_r: audio-codec@5b {
 		sound-name-prefix = "Right Amp";
 	};
 
-	/* invensense,icm42607p at 0x68 */
+	icm42607p: imu@68 {
+		compatible = "invensense,icm42607p";
+		reg = <0x68>;
+		interrupt-names = "INT1";
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PD6 IRQ_TYPE_EDGE_FALLING>;
+		mount-matrix = "-1", "0", "0",
+			       "0", "1", "0",
+			       "0", "0", "-1";
+		pinctrl-0 = <&accel_irq>;
+		pinctrl-names = "default";
+	};
 };
 
 &i2c3 {
@@ -933,6 +944,13 @@ &i2s1_8ch {
 };
 
 &pinctrl {
+	accel {
+		accel_irq: accel-irq {
+			rockchip,pins =
+				<0 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
 	gpio-keys {
 		vol_keys_l: vol-keys_l {
 			rockchip,pins =
-- 
2.43.0