From: Alexey Charkov <alchark@flipper.net>
To: Lee Jones <lee@kernel.org>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Chris Morgan <macromorgan@hotmail.com>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>,
Sebastian Reichel <sre@kernel.org>
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Sebastian Reichel <sebastian.reichel@collabora.com>,
linux-pm@vger.kernel.org, Alexey Charkov <alchark@flipper.net>
Subject: [PATCH v6 07/11] power: supply: bq257xx: Consistently use indirect get/set helpers
Date: Tue, 31 Mar 2026 19:43:44 +0400 [thread overview]
Message-ID: <20260331-bq25792-v6-7-0278fba33eb9@flipper.net> (raw)
In-Reply-To: <20260331-bq25792-v6-0-0278fba33eb9@flipper.net>
Move the remaining get/set helper functions to indirect calls via the
per-chip bq257xx_chip_info struct.
This improves the consistency of the code and prepares the driver to
support multiple chip variants with different register layouts and bit
definitions.
Tested-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Alexey Charkov <alchark@flipper.net>
---
drivers/power/supply/bq257xx_charger.c | 30 ++++++++++++++++++++++++------
1 file changed, 24 insertions(+), 6 deletions(-)
diff --git a/drivers/power/supply/bq257xx_charger.c b/drivers/power/supply/bq257xx_charger.c
index 39718223c3f9..0765673728e4 100644
--- a/drivers/power/supply/bq257xx_charger.c
+++ b/drivers/power/supply/bq257xx_charger.c
@@ -22,18 +22,30 @@ struct bq257xx_chg;
* @bq257xx_hw_init: init function for hw
* @bq257xx_hw_shutdown: shutdown function for hw
* @bq257xx_get_state: get and update state of hardware
+ * @bq257xx_get_ichg: get maximum charge current (in uA)
* @bq257xx_set_ichg: set maximum charge current (in uA)
+ * @bq257xx_get_vbatreg: get maximum charge voltage (in uV)
* @bq257xx_set_vbatreg: set maximum charge voltage (in uV)
+ * @bq257xx_get_iindpm: get maximum input current (in uA)
* @bq257xx_set_iindpm: set maximum input current (in uA)
+ * @bq257xx_get_cur: get battery current from ADC (in uA)
+ * @bq257xx_get_vbat: get battery voltage from ADC (in uV)
+ * @bq257xx_get_min_vsys: get minimum system voltage (in uV)
*/
struct bq257xx_chip_info {
int default_iindpm_uA;
int (*bq257xx_hw_init)(struct bq257xx_chg *pdata);
void (*bq257xx_hw_shutdown)(struct bq257xx_chg *pdata);
int (*bq257xx_get_state)(struct bq257xx_chg *pdata);
+ int (*bq257xx_get_ichg)(struct bq257xx_chg *pdata, int *intval);
int (*bq257xx_set_ichg)(struct bq257xx_chg *pdata, int ichg);
+ int (*bq257xx_get_vbatreg)(struct bq257xx_chg *pdata, int *intval);
int (*bq257xx_set_vbatreg)(struct bq257xx_chg *pdata, int vbatreg);
+ int (*bq257xx_get_iindpm)(struct bq257xx_chg *pdata, int *intval);
int (*bq257xx_set_iindpm)(struct bq257xx_chg *pdata, int iindpm);
+ int (*bq257xx_get_cur)(struct bq257xx_chg *pdata, int *intval);
+ int (*bq257xx_get_vbat)(struct bq257xx_chg *pdata, int *intval);
+ int (*bq257xx_get_min_vsys)(struct bq257xx_chg *pdata, int *intval);
};
/**
@@ -490,22 +502,22 @@ static int bq257xx_get_charger_property(struct power_supply *psy,
break;
case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
- return bq25703_get_iindpm(pdata, &val->intval);
+ return pdata->chip->bq257xx_get_iindpm(pdata, &val->intval);
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
- return bq25703_get_chrg_volt(pdata, &val->intval);
+ return pdata->chip->bq257xx_get_vbatreg(pdata, &val->intval);
case POWER_SUPPLY_PROP_CURRENT_NOW:
- return bq25703_get_cur(pdata, &val->intval);
+ return pdata->chip->bq257xx_get_cur(pdata, &val->intval);
case POWER_SUPPLY_PROP_VOLTAGE_NOW:
- return bq25703_get_vbat(pdata, &val->intval);
+ return pdata->chip->bq257xx_get_vbat(pdata, &val->intval);
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
- return bq25703_get_ichg_cur(pdata, &val->intval);
+ return pdata->chip->bq257xx_get_ichg(pdata, &val->intval);
case POWER_SUPPLY_PROP_VOLTAGE_MIN:
- return bq25703_get_min_vsys(pdata, &val->intval);
+ return pdata->chip->bq257xx_get_min_vsys(pdata, &val->intval);
case POWER_SUPPLY_PROP_USB_TYPE:
val->intval = pdata->usb_type;
@@ -633,9 +645,15 @@ static const struct bq257xx_chip_info bq25703_chip_info = {
.bq257xx_hw_init = &bq25703_hw_init,
.bq257xx_hw_shutdown = &bq25703_hw_shutdown,
.bq257xx_get_state = &bq25703_get_state,
+ .bq257xx_get_ichg = &bq25703_get_ichg_cur,
.bq257xx_set_ichg = &bq25703_set_ichg_cur,
+ .bq257xx_get_vbatreg = &bq25703_get_chrg_volt,
.bq257xx_set_vbatreg = &bq25703_set_chrg_volt,
+ .bq257xx_get_iindpm = &bq25703_get_iindpm,
.bq257xx_set_iindpm = &bq25703_set_iindpm,
+ .bq257xx_get_cur = &bq25703_get_cur,
+ .bq257xx_get_vbat = &bq25703_get_vbat,
+ .bq257xx_get_min_vsys = &bq25703_get_min_vsys,
};
/**
--
2.52.0
next prev parent reply other threads:[~2026-03-31 15:44 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-31 15:43 [PATCH v6 00/11] Add support for the TI BQ25792 battery charger Alexey Charkov
2026-03-31 15:43 ` [PATCH v6 01/11] dt-bindings: mfd: ti,bq25703a: Expand to include BQ25792 Alexey Charkov
2026-03-31 15:43 ` [PATCH v6 02/11] regulator: bq257xx: Remove reference to the parent MFD's dev Alexey Charkov
2026-03-31 15:43 ` [PATCH v6 03/11] regulator: bq257xx: Drop the regulator_dev from the driver data Alexey Charkov
2026-03-31 15:43 ` [PATCH v6 04/11] regulator: bq257xx: Make OTG enable GPIO really optional Alexey Charkov
2026-03-31 15:43 ` [PATCH v6 05/11] power: supply: bq257xx: Fix VSYSMIN clamping logic Alexey Charkov
2026-03-31 15:43 ` [PATCH v6 06/11] power: supply: bq257xx: Make the default current limit a per-chip attribute Alexey Charkov
2026-03-31 15:43 ` Alexey Charkov [this message]
2026-03-31 15:43 ` [PATCH v6 08/11] power: supply: bq257xx: Add fields for 'charging' and 'overvoltage' states Alexey Charkov
2026-03-31 15:43 ` [PATCH v6 09/11] mfd: bq257xx: Add BQ25792 support Alexey Charkov
2026-03-31 15:43 ` [PATCH v6 10/11] regulator: bq257xx: Add support for BQ25792 Alexey Charkov
2026-03-31 15:43 ` [PATCH v6 11/11] power: supply: " Alexey Charkov
2026-04-10 10:52 ` (subset) [PATCH v6 00/11] Add support for the TI BQ25792 battery charger Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260331-bq25792-v6-7-0278fba33eb9@flipper.net \
--to=alchark@flipper.net \
--cc=broonie@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=lee@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=macromorgan@hotmail.com \
--cc=robh@kernel.org \
--cc=sebastian.reichel@collabora.com \
--cc=sre@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox