[PATCH v3 5/5] riscv: dts: spacemit: Add PDMA controller node for K3 SoC

[Troy Mitchell <troy.mitchell@linux.spacemit.com>]

Add the Peripheral DMA (PDMA) controller node for the SpacemiT K3 SoC.
The PDMA controller provides general-purpose DMA capabilities for various
peripheral devices across the system to offload CPU data transfers.

Unlike the previous K1 SoC, where some DMA masters had memory addressing
limitations (e.g. restricted to the 0-4GB space) requiring a dedicated dma-bus
with dma-ranges to restrict memory allocations, the K3 DMA masters have
full memory addressing capabilities. Therefore, the PDMA node is now
instantiated directly under the main soc bus.

Signed-off-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>
---
 arch/riscv/boot/dts/spacemit/k3.dtsi | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/riscv/boot/dts/spacemit/k3.dtsi b/arch/riscv/boot/dts/spacemit/k3.dtsi
index a3a8ceddabec..cd321975fc18 100644
--- a/arch/riscv/boot/dts/spacemit/k3.dtsi
+++ b/arch/riscv/boot/dts/spacemit/k3.dtsi
@@ -438,6 +438,17 @@ soc: soc {
 		dma-noncoherent;
 		ranges;
 
+		pdma: dma-controller@d4000000 {
+			compatible = "spacemit,k3-pdma";
+			reg = <0x0 0xd4000000 0x0 0x4000>;
+			clocks = <&syscon_apmu CLK_APMU_DMA>;
+			resets = <&syscon_apmu RESET_APMU_DMA>;
+			interrupts = <72 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <16>;
+			#dma-cells = <1>;
+			status = "disabled";
+		};
+
 		syscon_apbc: system-controller@d4015000 {
 			compatible = "spacemit,k3-syscon-apbc";
 			reg = <0x0 0xd4015000 0x0 0x1000>;

-- 
2.53.0