[PATCH v4 3/4] arm64: dts: qcom: sdm845-shift-axolotl: Convert fb to use memory-region

[David Heidelberg via B4 Relay <devnull+david.ixit.cz@kernel.org>]

From: David Heidelberg <david@ixit.cz>

Instead of manually specifying reg, reuse the memory region.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: David Heidelberg <david@ixit.cz>
---
 arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts
index 740eb22550724..88d970268e282 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts
@@ -23,7 +23,7 @@ / {
 	qcom,board-id = <11 0>;
 
 	aliases {
-		display0 = &framebuffer0;
+		display0 = &framebuffer;
 		serial0 = &uart9;
 		serial1 = &uart6;
 	};
@@ -36,9 +36,9 @@ chosen {
 		stdout-path = "serial0";
 
 		/* Use framebuffer setup by the bootloader. */
-		framebuffer0: framebuffer@9d400000 {
+		framebuffer: framebuffer {
 			compatible = "simple-framebuffer";
-			reg = <0x0 0x9d400000 0x0 (1080 * 2160 * 4)>;
+			memory-region = <&framebuffer_mem>;
 			width = <1080>;
 			height = <2160>;
 			stride = <(1080 * 4)>;
@@ -62,7 +62,7 @@ key-vol-up {
 	};
 
 	reserved-memory {
-		framebuffer@9d400000 {
+		framebuffer_mem: framebuffer@9d400000 {
 			reg = <0x0 0x9d400000 0x0 (1080 * 2160 * 4)>;
 			no-map;
 		};

-- 
2.53.0