From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from zg8tmja2lje4os4yms4ymjma.icoremail.net (zg8tmja2lje4os4yms4ymjma.icoremail.net [206.189.21.223]) by smtp.subspace.kernel.org (Postfix) with ESMTP id 1BE3A381B00; Thu, 2 Apr 2026 09:18:40 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=206.189.21.223 ARC-Seal:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1775121531; cv=none; b=VvwRwl+oP18Cx6awQUOEvfCDs4waO1oGLv/F4Z4VKGZERZroma6l0IPm5obBUELG6cSyFkyqVqhOGOIhRfils3X4REEh3lCnQyB51Cjrtl5lF2lAHkvbTDWRmty4PRaSJEpinHrQagfZGB9f1HujcZnv8LogXcpIKLxCSBHYZKk= ARC-Message-Signature:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1775121531; c=relaxed/simple; bh=Kyih91n6QOVOTdAnALskydk10icL5FGjYOIjclSavyY=; h=From:To:Cc:Subject:Date:Message-Id:MIME-Version; b=kqjq9mEH3znLHVRcObmTrz+pKYwhsrU6RqxnRDFHMxjssJn+noiyhvckohxBQzaum9Arf/Jayi+5NvKmAJqLVyhSqyf8LhOBlynocHX71OiBMLLSYm+Cv9wOxcaW4Z1WO385Knnn+5K6uuHx0aILjLMgMJQbL8ftpXE3V9vOQjc= ARC-Authentication-Results:i=1; smtp.subspace.kernel.org; dmarc=none (p=none dis=none) header.from=eswincomputing.com; spf=pass smtp.mailfrom=eswincomputing.com; arc=none smtp.client-ip=206.189.21.223 Authentication-Results: smtp.subspace.kernel.org; dmarc=none (p=none dis=none) header.from=eswincomputing.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=eswincomputing.com Received: from E0005152DT.eswin.cn (unknown [10.12.96.41]) by app1 (Coremail) with SMTP id TAJkCgAnyXJbNM5pVhMOAA--.58655S2; Thu, 02 Apr 2026 17:18:20 +0800 (CST) From: dongxuyang@eswincomputing.com To: ukleinek@kernel.org, robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org, ben-linux@fluff.org, ben.dooks@codethink.co.uk, p.zabel@pengutronix.de, linux-pwm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Cc: ningyu@eswincomputing.com, linmin@eswincomputing.com, xuxiang@eswincomputing.com, wangguosheng@eswincomputing.com, pinkesh.vaghela@einfochips.com, Xuyang Dong Subject: [PATCH v3 0/2] Update designware pwm driver Date: Thu, 2 Apr 2026 17:17:18 +0800 Message-Id: <20260402091718.1608-1-dongxuyang@eswincomputing.com> X-Mailer: git-send-email 2.31.1.windows.1 Precedence: bulk X-Mailing-List: devicetree@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-CM-TRANSID:TAJkCgAnyXJbNM5pVhMOAA--.58655S2 X-Coremail-Antispam: 1UD129KBjvJXoWxAF1rZw4rXw1UXrykZF4fZrb_yoWrAw1Dpa ykKFWakrWkWrySgFs7X3W8uFyYqw18GFWUKwn5Ga4UZwn0y34UJrZYkFy5tF9Fvr1kWFya y34fGa17ua4YyF7anT9S1TB71UUUUU7qnTZGkaVYY2UrUUUUjbIjqfuFe4nvWSU5nxnvy2 9KBjDU0xBIdaVrnRJUUUBv14x267AKxVW8JVW5JwAFc2x0x2IEx4CE42xK8VAvwI8IcIk0 rVWrJVCq3wAFIxvE14AKwVWUJVWUGwA2ocxC64kIII0Yj41l84x0c7CEw4AK67xGY2AK02 1l84ACjcxK6xIIjxv20xvE14v26F1j6w1UM28EF7xvwVC0I7IYx2IY6xkF7I0E14v26r4U JVWxJr1l84ACjcxK6I8E87Iv67AKxVW0oVCq3wA2z4x0Y4vEx4A2jsIEc7CjxVAFwI0_Gc CE3s1le2I262IYc4CY6c8Ij28IcVAaY2xG8wAqx4xG64xvF2IEw4CE5I8CrVC2j2WlYx0E 2Ix0cI8IcVAFwI0_Jr0_Jr4lYx0Ex4A2jsIE14v26r1j6r4UMcvjeVCFs4IE7xkEbVWUJV W8JwACjcxG0xvY0x0EwIxGrwACjI8F5VA0II8E6IAqYI8I648v4I1lFIxGxcIEc7CjxVA2 Y2ka0xkIwI1lw4CEc2x0rVAKj4xxMxkF7I0En4kS14v26r1q6r43MxkIecxEwVCm-wCF04 k20xvY0x0EwIxGrwCFx2IqxVCFs4IE7xkEbVWUJVW8JwC20s026c02F40E14v26r1j6r18 MI8I3I0E7480Y4vE14v26r106r1rMI8E67AF67kF1VAFwI0_GFv_WrylIxkGc2Ij64vIr4 1lIxAIcVC0I7IYx2IY67AKxVWUJVWUCwCI42IY6xIIjxv20xvEc7CjxVAFwI0_Gr0_Cr1l IxAIcVCF04k26cxKx2IYs7xG6r1j6r1xMIIF0xvEx4A2jsIE14v26r1j6r4UMIIF0xvEx4 A2jsIEc7CjxVAFwI0_Gr0_Gr1UYxBIdaVFxhVjvjDU0xZFpf9x0JUmjgxUUUUU= X-CM-SenderInfo: pgrqw5xx1d0w46hv4xpqfrz1xxwl0woofrz/ From: Xuyang Dong There is already a patch [1] for the DesignWare PWM driver, which is posted by Ben and still under review. Based on this patch, this series is a continuation of [1] to add support for IP versions 2.11a and later, which includes support for "Pulse Width Modulation with 0% and 100% Duty Cycle". Supported chips: ESWIN EIC7700 series SoC. Test: Tested this patch on the Sifive HiFive Premier P550 (which uses the EIC7700 SoC). [1] https://lore.kernel.org/lkml/20230907161242.67190-1-ben.dooks@codethink.co.uk/ Updates: Change in v3: - YAML: - Added a clear justification for the optional resets property. It is required to support proper controller initialization when no PWM channel is active at boot time, while allowing the driver to skip reset deassertion if any channel is already enabled. - Driver: - Update the boundary value check of tmp in __dwc_pwm_configure_timer() for DWC_TIM_CTRL_0N100PWM_EN. - Replace 'sizeof(struct dwc_pwm_drvdata)' with 'struct_size(data, chips, 1)'. - Drop devm_clk_get_enabled() in favor of devm_clk_get() with explicit clk_prepare_enable() and clk_disable_unprepare() allowing runtime PM to manage clock state. - Replace devm_reset_control_get_optional_exclusive_deasserted() with devm_reset_control_get_optional_exclusive() and issue a full reset via reset_control_reset() only when no PWM channel is active at probe time. - Detect bootloader-enabled PWM channels by reading the enable bit, and initialize runtime PM as active for those channels by calling pm_runtime_set_active() and pm_runtime_get_noresume(). - Remove autosuspend as it is not required for this driver. - Use explicit pm_runtime_enable() and pm_runtime_disable() instead of the managed devm_pm_runtime_enable() variant to ensure correct cleanup. - On device removal, recheck the channel enable status. If any channel remains active, call pm_runtime_put_noidle() before disabling clocks via clk_disable_unprepare(). Resume device before register access during removal if it is runtime suspended, and re-suspend it afterward. - If device is suspended, resume it before register access during system resume/suspend. - Use pm_ptr() instead of pm_sleep_ptr() for correct PM operation. - Link to v2: https://lore.kernel.org/all/20260306093000.2065-1-dongxuyang@eswincomputing.com/ Change in v2: - YAML: - Remove eswin,eic7700-pwm.yaml. Use snps,dw-apb-timers-pwm2.yaml. The description in snps,dw-apb-timers-pwm2.yaml is better. - Add the resets property as optional, as defined in the databook. - Remove snps,pwm-full-range-enable as no additional property is needed. - Driver: - Change the file from pwm-dwc-eic7700.c to pwm-dwc-of.c from [1]. - Define DWC_TIM_VERSION_ID_2_11A 2.11a as the baseline version. - Enable the 0% and 100% duty cycle mode by setting dwc->feature if the version read from the TIMERS_COMP_VERSION register is later than or equal to DWC_TIM_VERSION_ID_2_11A. - Use the DIV_ROUND_UP_ULL() to calculate width in the .apply and .get_state. - Additionally, Power Management (PM) support has been added to the pwm-dwc-of.c driver. - Drop the headers that are not used. - Use devm_clk_get_enabled() instead of devm_clk_get(). - Drop of_match_ptr. - Fix build error with 1ULL << 32. Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202512061720.j31AsgM7-lkp@intel.com/ - Link to v1: https://lore.kernel.org/all/20251205090411.1388-1-dongxuyang@eswincomputing.com/ - Link to v9: https://lore.kernel.org/lkml/20230907161242.67190-1-ben.dooks@codethink.co.uk/ Xuyang Dong (2): dt-bindings: pwm: dwc: add reset optional pwm: dwc: add of/platform support .../bindings/pwm/snps,dw-apb-timers-pwm2.yaml | 3 + drivers/pwm/Kconfig | 10 + drivers/pwm/Makefile | 1 + drivers/pwm/pwm-dwc-core.c | 101 ++++-- drivers/pwm/pwm-dwc-of.c | 331 ++++++++++++++++++ drivers/pwm/pwm-dwc.h | 25 +- 6 files changed, 442 insertions(+), 29 deletions(-) create mode 100644 drivers/pwm/pwm-dwc-of.c -- 2.34.1