* [PATCH v2 2/2] arm64: dts: qcom: Add Motorola Edge 30 (dubai) DTS
2026-04-03 5:33 [PATCH v2 1/2] dt-bindings: arm: qcom: Add SM7325 Motorola Edge 30 (dubai) Val Packett
@ 2026-04-03 5:33 ` Val Packett
2026-04-04 21:54 ` Dmitry Baryshkov
2026-04-07 10:38 ` Konrad Dybcio
0 siblings, 2 replies; 4+ messages in thread
From: Val Packett @ 2026-04-03 5:33 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Kees Cook, Tony Luck, Guilherme G. Piccoli
Cc: Val Packett, ~postmarketos/upstreaming, phone-devel,
linux-arm-msm, devicetree, linux-kernel
The Motorola Edge 30 is a smartphone released in 2022.
This commit has the following features working:
- Display (simplefb)
- Touchscreen
- Power and volume buttons
- Storage (UFS 3.1)
- Battery (ADSP battmgr)
- USB (Type-C, 2.0, dual-role)
- Wi-Fi and Bluetooth (WCN6750 hw1.0)
Signed-off-by: Val Packett <val@packett.cool>
---
v2: Apply suggestions from Konrad
v1: https://lore.kernel.org/all/20260329103055.96649-2-val@packett.cool/
---
arch/arm64/boot/dts/qcom/Makefile | 1 +
.../boot/dts/qcom/sm7325-motorola-dubai.dts | 1456 +++++++++++++++++
2 files changed, 1457 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/sm7325-motorola-dubai.dts
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index c46d94bb6dd5..c4d5dba342e3 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -334,6 +334,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sm6375-sony-xperia-murray-pdx225.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm7125-xiaomi-curtana.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm7125-xiaomi-joyeuse.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm7225-fairphone-fp4.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sm7325-motorola-dubai.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm7325-nothing-spacewar.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8150-hdk.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8150-microsoft-surface-duo.dtb
diff --git a/arch/arm64/boot/dts/qcom/sm7325-motorola-dubai.dts b/arch/arm64/boot/dts/qcom/sm7325-motorola-dubai.dts
new file mode 100644
index 000000000000..3c836e196b19
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm7325-motorola-dubai.dts
@@ -0,0 +1,1456 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (c) 2026, Val Packett <val@packett.cool>
+ */
+
+/dts-v1/;
+
+/* PM7250B is configured to use SID8/9 */
+#define PM7250B_SID 8
+#define PM7250B_SID1 9
+
+#include <dt-bindings/arm/qcom,ids.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/iio/qcom,spmi-adc7-pm7325.h>
+#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "sm7325.dtsi"
+#include "pm7325.dtsi"
+#include "pm7250b.dtsi"
+#include "pm8350c.dtsi" /* PM7350C */
+#include "pmk8350.dtsi" /* PMK7325 */
+
+/ {
+ model = "Motorola Edge 30";
+ compatible = "motorola,dubai", "qcom,sm7325";
+ chassis-type = "handset";
+
+ aliases {
+ bluetooth0 = &bluetooth;
+ serial0 = &uart5;
+ serial1 = &uart7;
+ wifi0 = &wifi;
+ };
+
+ chosen {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ stdout-path = "serial0:115200n8";
+
+ framebuffer {
+ compatible = "simple-framebuffer";
+ memory-region = <&framebuffer_mem>;
+ width = <1080>;
+ height = <2400>;
+ stride = <(1080 * 4)>;
+ format = "a8r8g8b8";
+
+ clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+ <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+ <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ power-domains = <&dispcc DISP_CC_MDSS_CORE_GDSC>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-0 = <&kypd_vol_up_n>;
+ pinctrl-names = "default";
+
+ key-volume-up {
+ label = "Volume Up";
+ gpios = <&pm7325_gpios 6 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ };
+ };
+
+ pmic-glink {
+ compatible = "qcom,sm7325-pmic-glink",
+ "qcom,qcm6490-pmic-glink",
+ "qcom,pmic-glink";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ orientation-gpios = <&tlmm 140 GPIO_ACTIVE_HIGH>;
+
+ connector@0 {
+ compatible = "usb-c-connector";
+ reg = <0>;
+
+ power-role = "dual";
+ data-role = "dual";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ pmic_glink_hs_in: endpoint {
+ remote-endpoint = <&usb_1_dwc3_hs>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ pmic_glink_sbu: endpoint {
+ remote-endpoint = <&fsa4480_sbu_mux>;
+ };
+ };
+ };
+ };
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ ramoops@ae000000 {
+ compatible = "ramoops";
+ reg = <0x0 0xae000000 0x0 0xc0000>;
+ console-size = <0x40000>;
+ mem-type = <2>;
+ pmsg-size = <0x40000>;
+ record-size = <0x3f800>;
+ };
+
+ removed@c0000000 {
+ reg = <0x0 0xc0000000 0x0 0x5100000>;
+ no-map;
+ };
+
+ framebuffer_mem: framebuffer@e1000000 {
+ reg = <0x0 0xe1000000 0x0 (1080 * 2400 * 4)>;
+ no-map;
+ };
+
+ linux,cma {
+ compatible = "shared-dma-pool";
+ size = <0x0 0x8000000>;
+ reusable;
+ linux,cma-default;
+ };
+ };
+
+ thermal-zones {
+ cam-flash-thermal {
+ thermal-sensors = <&pmk8350_adc_tm 2>;
+
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ };
+ };
+
+ chg-skin-thermal {
+ thermal-sensors = <&pm7250b_adc_tm 0>;
+
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ };
+ };
+
+ chg-thermal {
+ thermal-sensors = <&pmk8350_adc_tm 4>;
+
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ };
+ };
+
+ conn-thermal {
+ thermal-sensors = <&pm7250b_adc_tm 1>;
+
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ };
+ };
+
+ pa-1-thermal {
+ thermal-sensors = <&pmk8350_adc_tm 5>;
+
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ };
+ };
+
+ pa-2-thermal {
+ thermal-sensors = <&pmk8350_adc_tm 6>;
+
+ /* Reports negative temperature. */
+ status = "disabled";
+
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ };
+ };
+
+ quiet-thermal {
+ thermal-sensors = <&pmk8350_adc_tm 1>;
+
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ };
+ };
+
+ sdm-skin-thermal {
+ thermal-sensors = <&pmk8350_adc_tm 3>;
+
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ };
+ };
+
+ xo-thermal {
+ thermal-sensors = <&pmk8350_adc_tm 0>;
+
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ };
+ };
+ };
+
+ // S2B is really ebi.lvl but it's there for supply map completeness sake.
+ vreg_s2b_0p7: smpb2-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vreg_s2b_0p7";
+
+ regulator-min-microvolt = <65535>;
+ regulator-max-microvolt = <65535>;
+ regulator-always-on;
+ vin-supply = <&vph_pwr>;
+ };
+
+ vph_pwr: vph-pwr-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vph_pwr";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+ };
+
+ wcn6750-pmu {
+ compatible = "qcom,wcn6750-pmu";
+ pinctrl-0 = <&bt_en>;
+ pinctrl-names = "default";
+ vddaon-supply = <&mos_0p95_aon_s10c>;
+ vddasd-supply = <&vreg_l11c_2p8>;
+ vddpmu-supply = <&mos_0p95_dig_s10c>;
+ vddio-supply = <&vdd18_io>;
+ vddrfa0p8-supply = <&vdd09_pmu_rfa_i>;
+ vddrfa1p2-supply = <&vdd13_pmu_rfa_i>;
+ vddrfa1p7-supply = <&vdd19_pmu_rfa_i>;
+ vddrfa2p2-supply = <&vdd22_wlpa_s1c>;
+
+ bt-enable-gpios = <&tlmm 85 GPIO_ACTIVE_HIGH>;
+
+ regulators {
+ vreg_pmu_rfa_cmn: ldo0 {
+ regulator-name = "vreg_pmu_rfa_cmn";
+ };
+
+ vreg_pmu_aon_0p59: ldo1 {
+ regulator-name = "vreg_pmu_aon_0p59";
+ };
+
+ vreg_pmu_wlcx_0p8: ldo2 {
+ regulator-name = "vreg_pmu_wlcx_0p8";
+ };
+
+ vreg_pmu_wlmx_0p85: ldo3 {
+ regulator-name = "vreg_pmu_wlmx_0p85";
+ };
+
+ vreg_pmu_btcmx_0p85: ldo4 {
+ regulator-name = "vreg_pmu_btcmx_0p85";
+ };
+
+ vreg_pmu_rfa_0p8: ldo5 {
+ regulator-name = "vreg_pmu_rfa_0p8";
+ };
+
+ vreg_pmu_rfa_1p2: ldo6 {
+ regulator-name = "vreg_pmu_rfa_1p2";
+ };
+
+ vreg_pmu_rfa_1p7: ldo7 {
+ regulator-name = "vreg_pmu_rfa_1p7";
+ };
+
+ vreg_pmu_pcie_0p9: ldo8 {
+ regulator-name = "vreg_pmu_pcie_0p9";
+ };
+
+ vreg_pmu_pcie_1p8: ldo9 {
+ regulator-name = "vreg_pmu_pcie_1p8";
+ };
+ };
+ };
+};
+
+&apps_rsc {
+ regulators-0 {
+ compatible = "qcom,pm7325-rpmh-regulators";
+ qcom,pmic-id = "b";
+
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+ vdd-s7-supply = <&vph_pwr>;
+ vdd-s8-supply = <&vph_pwr>;
+
+ vdd-l1-l4-l12-l15-supply = <&vreg_s7b_0p952>;
+ vdd-l2-l7-supply = <&vreg_bob>;
+ vdd-l3-supply = <&vreg_s2b_0p7>;
+ vdd-l5-supply = <&vreg_s2b_0p7>;
+ vdd-l6-l9-l10-supply = <&vreg_s8b_1p256>;
+ vdd-l8-supply = <&vreg_s7b_0p952>;
+ vdd-l11-l17-l18-l19-supply = <&vreg_s1b_1p856>;
+ vdd-l13-supply = <&vreg_s7b_0p952>;
+ vdd-l14-l16-supply = <&vreg_s8b_1p256>;
+
+ /*
+ * S2, L4-L5 are ARCs:
+ * S2 - ebi.lvl,
+ * L4 - lmx.lvl,
+ * l5 - lcx.lvl.
+ *
+ * L10 are unused.
+ */
+
+ vdd19_pmu_rfa_i:
+ vreg_s1b_1p856: smps1 {
+ regulator-name = "vreg_s1b_1p856";
+ regulator-min-microvolt = <1840000>;
+ regulator-max-microvolt = <2040000>;
+ };
+
+ mos_0p95_aon_s10c:
+ mos_0p95_dig_s10c:
+ vdd09_pmu_rfa_i:
+ vreg_s7b_0p952: smps7 {
+ regulator-name = "vreg_s7b_0p952";
+ regulator-min-microvolt = <535000>;
+ regulator-max-microvolt = <1120000>;
+ };
+
+ vdd13_pmu_rfa_i:
+ vreg_s8b_1p256: smps8 {
+ regulator-name = "vreg_s8b_1p256";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_RET>;
+ };
+
+ vreg_l1b_0p912: ldo1 {
+ regulator-name = "vreg_l1b_0p912";
+ regulator-min-microvolt = <825000>;
+ regulator-max-microvolt = <925000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vdd_a_usbhs_3p1:
+ vreg_l2b_3p072: ldo2 {
+ regulator-name = "vreg_l2b_3p072";
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <3544000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3b_0p6: ldo3 {
+ regulator-name = "vreg_l3b_0p6";
+ regulator-min-microvolt = <312000>;
+ regulator-max-microvolt = <910000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vdd_a_dsi_0_1p2:
+ vdd_a_ufs_0_1p2:
+ vreg_l6b_1p2: ldo6 {
+ regulator-name = "vreg_l6b_1p2";
+ regulator-min-microvolt = <1140000>;
+ regulator-max-microvolt = <1260000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7b_2p96: ldo7 {
+ regulator-name = "vreg_l7b_2p96";
+ regulator-min-microvolt = <2400000>;
+ regulator-max-microvolt = <3544000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l8b_0p904: ldo8 {
+ regulator-name = "vreg_l8b_0p904";
+ regulator-min-microvolt = <870000>;
+ regulator-max-microvolt = <970000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l9b_1p2: ldo9 {
+ regulator-name = "vreg_l9b_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l11b_1p776: ldo11 {
+ regulator-name = "vreg_l11b_1p776";
+ regulator-min-microvolt = <1504000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l12b_0p8: ldo12 {
+ regulator-name = "vreg_l12b_0p8";
+ regulator-min-microvolt = <751000>;
+ regulator-max-microvolt = <824000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l13b_0p8: ldo13 {
+ regulator-name = "vreg_l13b_0p8";
+ regulator-min-microvolt = <530000>;
+ regulator-max-microvolt = <824000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l14b_1p2: ldo14 {
+ regulator-name = "vreg_l14b_1p2";
+ regulator-min-microvolt = <1080000>;
+ regulator-max-microvolt = <1304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l15b_0p88: ldo15 {
+ regulator-name = "vreg_l15b_0p88";
+ regulator-min-microvolt = <765000>;
+ regulator-max-microvolt = <1020000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l16b_1p2: ldo16 {
+ regulator-name = "vreg_l16b_1p2";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l17b_1p8: ldo17 {
+ regulator-name = "vreg_l17b_1p8";
+ regulator-min-microvolt = <1700000>;
+ regulator-max-microvolt = <1900000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l18b_1p8: ldo18 {
+ regulator-name = "vreg_l18b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd18_io:
+ vreg_l19b_1p8: ldo19 {
+ regulator-name = "vreg_l19b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-1 {
+ compatible = "qcom,pm8350c-rpmh-regulators";
+ qcom,pmic-id = "c";
+
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+ vdd-s5-supply = <&vph_pwr>;
+ vdd-s7-supply = <&vph_pwr>;
+ vdd-s9-supply = <&vph_pwr>;
+ vdd-s10-supply = <&vph_pwr>;
+
+ vdd-l1-l12-supply = <&vreg_s1b_1p856>;
+ vdd-l2-l8-supply = <&vreg_s1b_1p856>;
+ vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>;
+ vdd-l6-l9-l11-supply = <&vreg_bob>;
+ vdd-l10-supply = <&vreg_s7b_0p952>;
+
+ vdd-bob-supply = <&vph_pwr>;
+
+ /*
+ * S2, S5, S7, S10 are ARCs:
+ * S2 - cx.lvl,
+ * S5 - mss.lvl,
+ * S7 - gfx.lvl,
+ * S10 - mx.lvl.
+ */
+
+ vdd22_wlpa_s1c:
+ vreg_s1c_2p2: smps1 {
+ regulator-name = "vreg_s1c_2p2";
+ regulator-min-microvolt = <2190000>;
+ regulator-max-microvolt = <2210000>;
+ };
+
+ vreg_s9c_0p676: smps9 {
+ regulator-name = "vreg_s9c_0p676";
+ regulator-min-microvolt = <1010000>;
+ regulator-max-microvolt = <1170000>;
+ };
+
+ vdd_a_usbhs_1p8:
+ vdd_qfprom:
+ vreg_l1c_1p8: ldo1 {
+ regulator-name = "vreg_l1c_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1980000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ iovdd_ts:
+ vreg_l2c_1p8: ldo2 {
+ regulator-name = "vreg_l2c_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vdd_ts:
+ vreg_l3c_3p0: ldo3 {
+ regulator-name = "vreg_l3c_3p0";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l4c_1p8_3p0: ldo4 {
+ regulator-name = "vreg_l4c_1p8_3p0";
+ regulator-min-microvolt = <1620000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l5c_1p8_3p0: ldo5 {
+ regulator-name = "vreg_l5c_1p8_3p0";
+ regulator-min-microvolt = <1620000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6c_2p96: ldo6 {
+ regulator-name = "vreg_l6c_2p96";
+ regulator-min-microvolt = <1650000>;
+ regulator-max-microvolt = <3544000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7c_3p0: ldo7 {
+ regulator-name = "vreg_l7c_3p0";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3544000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l8c_1p8: ldo8 {
+ regulator-name = "vreg_l8c_1p8";
+ regulator-min-microvolt = <1620000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l9c_3p3: ldo9 {
+ regulator-name = "vreg_l9c_2p96";
+ regulator-min-microvolt = <3008000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vdd_a_dsi_0_0p9:
+ vdd_a_ufs_0_core:
+ vdd_a_usbhs_core:
+ vreg_l10c_0p88: ldo10 {
+ regulator-name = "vreg_l10c_0p88";
+ regulator-min-microvolt = <720000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l11c_2p8: ldo11 {
+ regulator-name = "vreg_l11c_2p8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <3544000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ disp_iovcc_1p8:
+ vreg_l12c_1p8: ldo12 {
+ regulator-name = "vreg_l12c_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ disp_vci_3p0:
+ vreg_l13c_3p0: ldo13 {
+ regulator-name = "vreg_l13c_3p0";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ audio_sw_vcc:
+ vreg_bob: bob {
+ regulator-name = "vreg_bob";
+ regulator-min-microvolt = <3008000>;
+ regulator-max-microvolt = <3960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+ };
+ };
+};
+
+&gcc {
+ protected-clocks = <GCC_CFG_NOC_LPASS_CLK>,
+ <GCC_MSS_CFG_AHB_CLK>,
+ <GCC_MSS_OFFLINE_AXI_CLK>,
+ <GCC_MSS_Q6SS_BOOT_CLK_SRC>,
+ <GCC_MSS_Q6_MEMNOC_AXI_CLK>,
+ <GCC_MSS_SNOC_AXI_CLK>,
+ <GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
+ <GCC_QSPI_CORE_CLK>,
+ <GCC_QSPI_CORE_CLK_SRC>,
+ <GCC_SEC_CTRL_CLK_SRC>,
+ <GCC_WPSS_AHB_BDG_MST_CLK>,
+ <GCC_WPSS_AHB_CLK>,
+ <GCC_WPSS_RSCP_CLK>;
+};
+
+&gpi_dma0 {
+ status = "okay";
+};
+
+&gpi_dma1 {
+ status = "okay";
+};
+
+&gpu {
+ status = "okay";
+};
+
+&gpu_zap_shader {
+ firmware-name = "qcom/sm7325/motorola/dubai/a660_zap.mbn";
+};
+
+&i2c4 {
+ clock-frequency = <100000>;
+
+ status = "okay";
+
+ typec-mux@42 {
+ compatible = "fcs,fsa4480";
+ reg = <0x42>;
+
+ interrupts-extended = <&tlmm 6 IRQ_TYPE_LEVEL_LOW>;
+
+ vcc-supply = <&audio_sw_vcc>;
+
+ mode-switch;
+ orientation-switch;
+
+ port {
+ fsa4480_sbu_mux: endpoint {
+ remote-endpoint = <&pmic_glink_sbu>;
+ };
+ };
+ };
+};
+
+&ipa {
+ firmware-name = "qcom/sm7325/motorola/dubai/yupik_ipa_fws.mbn";
+ memory-region = <&ipa_fw_mem>;
+
+ qcom,gsi-loader = "self";
+
+ status = "okay";
+};
+
+&pm7250b_adc {
+ channel@4e {
+ reg = <ADC5_AMUX_THM2_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ qcom,pre-scaling = <1 1>;
+ label = "chg_skin_therm";
+ };
+
+ channel@4f {
+ reg = <ADC5_AMUX_THM3_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ qcom,pre-scaling = <1 1>;
+ label = "conn_therm";
+ };
+};
+
+&pm7250b_adc_tm {
+ status = "okay";
+
+ chg-skin-therm@0 {
+ reg = <0>;
+ io-channels = <&pm7250b_adc ADC5_AMUX_THM2_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+
+ conn-therm@1 {
+ reg = <1>;
+ io-channels = <&pm7250b_adc ADC5_AMUX_THM3_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+};
+
+&pm7250b_gpios {
+ gpio-line-names = "FG_ALERT_N", /* GPIO_1 */
+ "SLAVECP_INT",
+ "NC",
+ "NC",
+ "NC",
+ "DOUBLER_STAT",
+ "NC",
+ "NC",
+ "NC",
+ "NC", /* GPIO_10 */
+ "NC",
+ "NC";
+};
+
+&pm7325_gpios {
+ gpio-line-names = "PA_THERM1", /* GPIO_1 */
+ "NC",
+ "NC",
+ "PA_THERM2",
+ "CBL_PWR_N",
+ "KYPD_VOL_UP_N",
+ "NC",
+ "NC",
+ "NC",
+ "NC"; /* GPIO_10 */
+
+ kypd_vol_up_n: kypd-volp-n-state {
+ pins = "gpio6";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ bias-pull-up;
+ input-enable;
+ power-source = <1>;
+ };
+};
+
+&pm8350c_gpios {
+ gpio-line-names = "NC", /* GPIO_1 */
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC"; /* GPIO_9 */
+};
+
+&pm8350c_flash {
+ status = "okay";
+
+ led-0 {
+ function = LED_FUNCTION_FLASH;
+ color = <LED_COLOR_ID_WHITE>;
+ led-sources = <1>, <4>;
+ led-max-microamp = <500000>;
+ flash-max-microamp = <1500000>;
+ flash-max-timeout-us = <400000>;
+ };
+
+ led-1 {
+ function = LED_FUNCTION_FLASH;
+ color = <LED_COLOR_ID_WHITE>;
+ led-sources = <2>, <3>;
+ led-max-microamp = <500000>;
+ flash-max-microamp = <1500000>;
+ flash-max-timeout-us = <400000>;
+ };
+};
+
+&pmk8350_adc_tm {
+ status = "okay";
+
+ xo-therm@0 {
+ reg = <0>;
+ io-channels = <&pmk8350_vadc PMK8350_ADC7_AMUX_THM1_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+
+ quiet-therm@1 {
+ reg = <1>;
+ io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM1_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+
+ cam-flash-therm@2 {
+ reg = <2>;
+ io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM2_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+
+ sdm-skin-therm@3 {
+ reg = <3>;
+ io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM3_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+
+ chg-therm@4 {
+ reg = <4>;
+ io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM4_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+
+ pa-therm-1@5 {
+ reg = <5>;
+ io-channels = <&pmk8350_vadc PM7325_ADC7_GPIO1_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+
+ pa-therm-2@6 {
+ reg = <6>;
+ io-channels = <&pmk8350_vadc PM7325_ADC7_GPIO4_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+};
+
+&pmk8350_gpios {
+ gpio-line-names = "NC", /* GPIO_0 */
+ "NC",
+ "TP_PMK_GPIO_3",
+ "PMK_OPTION"; /* GPIO_4 */
+};
+
+&pmk8350_rtc {
+ status = "okay";
+};
+
+&pmk8350_vadc {
+ status = "okay";
+
+ channel@44 {
+ reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ qcom,pre-scaling = <1 1>;
+ label = "pmk8350_xo_therm";
+ };
+
+ channel@144 {
+ reg = <PM7325_ADC7_AMUX_THM1_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ qcom,pre-scaling = <1 1>;
+ label = "pm7325_quiet_therm";
+ };
+
+ channel@145 {
+ reg = <PM7325_ADC7_AMUX_THM2_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ qcom,pre-scaling = <1 1>;
+ label = "pm7325_cam_flash_therm";
+ };
+
+ channel@146 {
+ reg = <PM7325_ADC7_AMUX_THM3_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ qcom,pre-scaling = <1 1>;
+ label = "pm7325_sdm_skin_therm";
+ };
+
+ channel@147 {
+ reg = <PM7325_ADC7_AMUX_THM4_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ qcom,pre-scaling = <1 1>;
+ label = "pm7325_chg_therm";
+ };
+
+ channel@14a {
+ reg = <PM7325_ADC7_GPIO1_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ qcom,pre-scaling = <1 1>;
+ label = "pm7325_pa_therm1";
+ };
+
+ channel@14d {
+ reg = <PM7325_ADC7_GPIO4_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ qcom,pre-scaling = <1 1>;
+ label = "pm7325_pa_therm2";
+ };
+};
+
+&pon_pwrkey {
+ status = "okay";
+};
+
+&pon_resin {
+ linux,code = <KEY_VOLUMEDOWN>;
+
+ status = "okay";
+};
+
+&qfprom {
+ vcc-supply = <&vdd_qfprom>;
+};
+
+&qup_spi13_cs {
+ drive-strength = <6>;
+ bias-pull-down;
+};
+
+&qup_spi13_data_clk {
+ drive-strength = <6>;
+ bias-pull-down;
+};
+
+&qup_uart5_rx {
+ drive-strength = <2>;
+ bias-disable;
+};
+
+&qup_uart5_tx {
+ drive-strength = <2>;
+ bias-disable;
+};
+
+&qup_uart7_cts {
+ /*
+ * Configure a bias-bus-hold on CTS to lower power
+ * usage when Bluetooth is turned off. Bus hold will
+ * maintain a low power state regardless of whether
+ * the Bluetooth module drives the pin in either
+ * direction or leaves the pin fully unpowered.
+ */
+ bias-bus-hold;
+};
+
+&qup_uart7_rts {
+ /* We'll drive RTS, so no pull */
+ drive-strength = <2>;
+ bias-disable;
+};
+
+&qup_uart7_rx {
+ /*
+ * Configure a pull-up on RX. This is needed to avoid
+ * garbage data when the TX pin of the Bluetooth module is
+ * in tri-state (module powered off or not driving the
+ * signal yet).
+ */
+ bias-pull-up;
+};
+
+&qup_uart7_tx {
+ /* We'll drive TX, so no pull */
+ drive-strength = <2>;
+ bias-disable;
+};
+
+&qupv3_id_0 {
+ status = "okay";
+};
+
+&qupv3_id_1 {
+ status = "okay";
+};
+
+&remoteproc_adsp {
+ firmware-name = "qcom/sm7325/motorola/dubai/adsp.mbn";
+
+ status = "okay";
+};
+
+&remoteproc_cdsp {
+ firmware-name = "qcom/sm7325/motorola/dubai/cdsp.mbn";
+
+ status = "okay";
+};
+
+&remoteproc_mpss {
+ firmware-name = "qcom/sm7325/motorola/dubai/modem.mbn";
+
+ status = "okay";
+};
+
+&remoteproc_wpss {
+ firmware-name = "qcom/sm7325/motorola/dubai/wpss.mbn";
+
+ status = "okay";
+};
+
+&rmtfs_mem {
+ qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>,
+ <QCOM_SCM_VMID_NAV>;
+};
+
+&spi13 {
+ status = "okay";
+
+ touchscreen@0 {
+ compatible = "goodix,gt9916";
+ reg = <0>;
+
+ interrupts-extended = <&tlmm 81 IRQ_TYPE_LEVEL_LOW>;
+
+ reset-gpios = <&tlmm 105 GPIO_ACTIVE_LOW>;
+
+ avdd-supply = <&vdd_ts>;
+ vddio-supply = <&iovdd_ts>;
+
+ spi-max-frequency = <1000000>;
+
+ touchscreen-size-x = <1080>;
+ touchscreen-size-y = <2400>;
+
+ pinctrl-0 = <&ts_int_n>, <&ts_reset_n>;
+ pinctrl-names = "default";
+ };
+};
+
+&tlmm {
+ gpio-line-names = "NC", /* GPIO_0 */
+ "NC",
+ "NC",
+ "NC",
+ "SMARTPA_I2C_SDA",
+ "SMARTPA_I2C_SCK",
+ "AUD_4480_DET",
+ "AUD_4480_INT",
+ "FASTCHARGE_I2C_SDA",
+ "FASTCHARGE_I2C_SCL",
+ "SM_GPSLNA_EN_GPIO10", /* GPIO_10 */
+ "NC",
+ "PERI_I2C_SDA",
+ "PERI_I2C_SCL",
+ "NC",
+ "NC",
+ "APPS_I2C_SDA",
+ "APPS_I2C_SCL",
+ "NC",
+ "DISP_LDO_EN",
+ "CAM_FW_RST_N", /* GPIO_20 */
+ "CAM_RM_RST_N",
+ "DBG_UART_TXD",
+ "DBG_UART_RXD",
+ "TOPSB_INT_N",
+ "MCAM_LDO_EN",
+ "HOST2WLAN_SOL",
+ "WLAN2HOST_SOL",
+ "UART_BT_RTS_AP_CTS",
+ "UART_BT_CTS_AP_RTS",
+ "UART_BT_RX_AP_TX", /* GPIO_30 */
+ "UART_BT_TX_AP_RX",
+ "FRONT_60M_INT",
+ "FRONT_60M_RST",
+ "FP_INT",
+ "FP_RST",
+ "NFC_I2C_SDA",
+ "NFC_I2C_SCL",
+ "NFC_EN",
+ "NFC_CLK_REQ",
+ "NFC_SE_SPI_NREST", /* GPIO_40 */
+ "NFC_IRQ",
+ "RF_LDO_GPIO42_EN",
+ "GOOGLE_KEY_INT", /* no such key exists */
+ "DISP_RST_N",
+ "SB_INT_N",
+ "HAP_RST_N",
+ "HAP_INT",
+ "ESE_SPI_MISO",
+ "ESE_SPI_MOSI",
+ "ESE_SPI_CLK", /* GPIO_50 */
+ "ESE_SPI_CS",
+ "TP_SPI_MISO",
+ "TP_SPI_MOSI",
+ "TP_SPI_CLK",
+ "TP_SPI_CS_N",
+ "FP_SPI_MISO",
+ "FP_SPI_MOSI",
+ "FP_SPI_CLK",
+ "FP_SPI_CS_N",
+ "HW_ID_1", /* GPIO_60 */
+ "HW_ID_2",
+ "CAM_PMU_EN",
+ "WIDE_DVDD_LDO_EN",
+ "CAM_MCLK0",
+ "CAM_MCLK1",
+ "CAM_MCLK2",
+ "CAM_MCLK3",
+ "NC",
+ "CCI_I2C_SDA0",
+ "CCI_I2C_SCL0", /* GPIO_70 */
+ "CCI_I2C_SDA1",
+ "CCI_I2C_SCL1",
+ "CCI_I2C_SDA2",
+ "CCI_I2C_SCL2",
+ "CCI_I2C_SDA3",
+ "CCI_I2C_SCL3",
+ "CAM_RT_RST_N",
+ "CAM_RU_RST_N",
+ "FCAM_LDO_EN",
+ "DISP_TE", /* GPIO_80 */
+ "TP_INT_N",
+ "FORCED_USB_BOOT",
+ "SM_CDC_RST_N",
+ "WLAN_EN",
+ "BT_EN",
+ "WCN_SW_CTRL",
+ "PCIE0_RESET_N",
+ "PCIE0_CLK_REQ_N",
+ "PCIE0_WAKE_N",
+ "MOS_AS_EN", /* GPIO_90 */
+ "NC",
+ "",
+ "NC",
+ "BT_FM_SLIMBUS_CLK",
+ "BT_FM_SLIMBUS_DATA",
+ "NC",
+ "RFCONN_DET_1",
+ "RF_CON_DET_2",
+ "RF_CON_DET_3",
+ "NC", /* GPIO_100 */
+ "NC",
+ "NC",
+ "ACCEL_INT",
+ "NC",
+ "TP_RST_N",
+ "NC",
+ "NC",
+ "NC",
+ "UIM2_DATA",
+ "UIM2_CLK", /* GPIO_110 */
+ "UIM2_RESET",
+ "UIM2_PRESENT",
+ "UIM1_DATA",
+ "UIM1_CLK",
+ "UIM1_RESET",
+ "UIM1_PRESENT",
+ "SM_RFFE0_CLK",
+ "SM_RFFE0_DATA",
+ "SM_RFFE1_CLK",
+ "SM_RFFE1_DATA", /* GPIO_120 */
+ "PA_MUTING",
+ "SM_GRFC5",
+ "LAA_RX",
+ "SM_GRFC7",
+ "SM_RFFE4_CLK",
+ "SM_RFFE4_DATA",
+ "WLAN_COEX_UART_RX",
+ "WLAN_COEX_UART_TX",
+ "NC",
+ "NC", /* GPIO_130 */
+ "SM_GRFC12",
+ "NC",
+ "QLINK0_REQUEST",
+ "QLINK0_ENABLE",
+ "QLINK0_WMSS_RESET_N",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "USB_CC_DIR", /* GPIO_140 */
+ "SAR_INT_N",
+ "PROX_INT_N",
+ "",
+ "SM_SWR_TX_CLK",
+ "SM_SWR_TX_DATA0",
+ "SM_SWR_TX_DATA1",
+ "SM_SWR_RX_CLK",
+ "SM_SWR_RX_DATA0",
+ "SM_SWR_RX_DATA1",
+ "NC", /* GPIO_150 */
+ "NC",
+ "NC",
+ "NC",
+ "SB_MI2S_SCK",
+ "SB_MI2S_WS",
+ "SB_MI2S_RXDAT_AP_TX",
+ "SB_MI2S_TXDAT_AP_RX",
+ "NC",
+ "SNS_I3C0_SDA",
+ "SNS_I3C0_SCL", /* GPIO_160 */
+ "SSC_I2C4_SDA",
+ "SSC_I2C4_SCL",
+ "MAG_I2C_SDA",
+ "MAG_I2C_SCL",
+ "NC",
+ "NC",
+ "",
+ "",
+ "",
+ "", /* GPIO_170 */
+ "SSC_BT_UART4_TX",
+ "SSC_BT_UART4_RX",
+ "NC",
+ "NC";
+ gpio-reserved-ranges = <48 4>, /* SPI (eSE - embedded Secure Element) */
+ <56 4>; /* SPI (fingerprint reader) */
+
+ qup_uart7_sleep_cts: qup-uart7-sleep-cts-state {
+ pins = "gpio28";
+ function = "gpio";
+ /*
+ * Configure a bias-bus-hold on CTS to lower power
+ * usage when Bluetooth is turned off. Bus hold will
+ * maintain a low power state regardless of whether
+ * the Bluetooth module drives the pin in either
+ * direction or leaves the pin fully unpowered.
+ */
+ bias-bus-hold;
+ };
+
+ qup_uart7_sleep_rts: qup-uart7-sleep-rts-state {
+ pins = "gpio29";
+ function = "gpio";
+ /*
+ * Configure pull-down on RTS. As RTS is active low
+ * signal, pull it low to indicate the BT SoC that it
+ * can wakeup the system anytime from suspend state by
+ * pulling RX low (by sending wakeup bytes).
+ */
+ bias-pull-down;
+ };
+
+ qup_uart7_sleep_tx: qup-uart7-sleep-tx-state {
+ pins = "gpio30";
+ function = "gpio";
+ /*
+ * Configure pull-up on TX when it isn't actively driven
+ * to prevent BT SoC from receiving garbage during sleep.
+ */
+ bias-pull-up;
+ };
+
+ qup_uart7_sleep_rx: qup-uart7-sleep-rx-state {
+ pins = "gpio31";
+ function = "gpio";
+ /*
+ * Configure a pull-up on RX. This is needed to avoid
+ * garbage data when the TX pin of the Bluetooth module
+ * is floating which may cause spurious wakeups.
+ */
+ bias-pull-up;
+ };
+
+ oled_reset_n: oled-reset-n-state {
+ pins = "gpio44";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-disable;
+ };
+
+ aw86224_reset_default: aw86224-reset-default-state {
+ pins = "gpio46";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ aw86224_int_default: aw86224-int-default-state {
+ pins = "gpio47";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ mdp_vsync_p: mdp-vsync-p-state {
+ pins = "gpio80";
+ function = "mdp_vsync";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ ts_int_n: ts-int-n-state {
+ pins = "gpio81";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+
+ bt_en: bt-en-state {
+ pins = "gpio85";
+ function = "gpio";
+ output-low;
+ bias-disable;
+ };
+
+ ts_reset_n: ts-int-n-state {
+ pins = "gpio105";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+};
+
+&uart5 {
+ status = "okay";
+};
+
+&uart7 {
+ /delete-property/ interrupts;
+ interrupts-extended = <&intc GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>,
+ <&tlmm 31 IRQ_TYPE_EDGE_FALLING>;
+ pinctrl-1 = <&qup_uart7_sleep_cts>,
+ <&qup_uart7_sleep_rts>,
+ <&qup_uart7_sleep_tx>,
+ <&qup_uart7_sleep_rx>;
+ pinctrl-names = "default",
+ "sleep";
+
+ status = "okay";
+
+ bluetooth: bluetooth {
+ compatible = "qcom,wcn6750-bt";
+
+ vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+ vddaon-supply = <&vreg_pmu_aon_0p59>;
+ vddbtcmx-supply = <&vreg_pmu_btcmx_0p85>;
+ vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+ vddrfa1p7-supply = <&vreg_pmu_rfa_1p7>;
+ vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+
+ max-speed = <3200000>;
+
+ qcom,local-bd-address-broken;
+ };
+};
+
+&ufs_mem_hc {
+ reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>;
+
+ vcc-supply = <&vreg_l7b_2p96>;
+ vcc-max-microamp = <800000>;
+
+ vccq-supply = <&vreg_l9b_1p2>;
+ vccq-max-microamp = <900000>;
+
+ status = "okay";
+};
+
+&ufs_mem_phy {
+ vdda-phy-supply = <&vdd_a_ufs_0_core>;
+ vdda-pll-supply = <&vdd_a_ufs_0_1p2>;
+
+ status = "okay";
+};
+
+&usb_1 {
+ /* USB 2.0 only */
+ qcom,select-utmi-as-pipe-clk;
+ maximum-speed = "high-speed";
+
+ /* Remove USB3 phy */
+ phys = <&usb_1_hsphy>;
+ phy-names = "usb2-phy";
+
+ status = "okay";
+};
+
+&usb_1_dwc3_hs {
+ remote-endpoint = <&pmic_glink_hs_in>;
+};
+
+&usb_1_hsphy {
+ vdda-pll-supply = <&vdd_a_usbhs_core>;
+ vdda18-supply = <&vdd_a_usbhs_1p8>;
+ vdda33-supply = <&vdd_a_usbhs_3p1>;
+
+ status = "okay";
+};
+
+&venus {
+ firmware-name = "qcom/sm7325/motorola/dubai/vpu20_1v.mbn";
+
+ status = "okay";
+};
+
+&wifi {
+ qcom,calibration-variant = "Motorola_dubai";
+
+ status = "okay";
+};
--
2.53.0
^ permalink raw reply related [flat|nested] 4+ messages in thread