[PATCH v2 5/8] dt-bindings: display/msm: qcom,eliza-mdss: Correct DPU and DP ranges in example

[Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>]

VBIF register range is 0x3000 long.  DisplayPort block has few too short
ranges and misses four more address spaces.  Similarly first part of DSI
space should be 0x300 long.

No practical impact, except when existing code is being re-used in new
contributions.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
---
 .../bindings/display/msm/qcom,eliza-mdss.yaml        | 20 ++++++++++++--------
 1 file changed, 12 insertions(+), 8 deletions(-)

diff --git a/Documentation/devicetree/bindings/display/msm/qcom,eliza-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,eliza-mdss.yaml
index 47938d13d1ca..bd4ba91a171f 100644
--- a/Documentation/devicetree/bindings/display/msm/qcom,eliza-mdss.yaml
+++ b/Documentation/devicetree/bindings/display/msm/qcom,eliza-mdss.yaml
@@ -119,7 +119,7 @@ examples:
         mdss_mdp: display-controller@ae01000 {
             compatible = "qcom,eliza-dpu";
             reg = <0x0ae01000 0x93000>,
-                  <0x0aeb0000 0x2008>;
+                  <0x0aeb0000 0x3000>;
             reg-names = "mdp",
                         "vbif";
 
@@ -304,7 +304,7 @@ examples:
         mdss_dsi0_phy: phy@ae95000 {
             compatible = "qcom,eliza-dsi-phy-4nm", "qcom,sm8650-dsi-phy-4nm";
             reg = <0x0ae95000 0x200>,
-                  <0x0ae95200 0x280>,
+                  <0x0ae95200 0x300>,
                   <0x0ae95500 0x400>;
             reg-names = "dsi_phy",
                         "dsi_phy_lane",
@@ -388,7 +388,7 @@ examples:
         mdss_dsi1_phy: phy@ae97000 {
             compatible = "qcom,eliza-dsi-phy-4nm", "qcom,sm8650-dsi-phy-4nm";
             reg = <0x0ae97000 0x200>,
-                  <0x0ae97200 0x280>,
+                  <0x0ae97200 0x300>,
                   <0x0ae97500 0x400>;
             reg-names = "dsi_phy",
                         "dsi_phy_lane",
@@ -407,11 +407,15 @@ examples:
 
         displayport-controller@af54000 {
             compatible = "qcom,eliza-dp", "qcom,sm8650-dp";
-            reg = <0xaf54000 0x104>,
-                  <0xaf54200 0xc0>,
-                  <0xaf55000 0x770>,
-                  <0xaf56000 0x9c>,
-                  <0xaf57000 0x9c>;
+            reg = <0x0af54000 0x200>,
+                  <0x0af54200 0x200>,
+                  <0x0af55000 0xc00>,
+                  <0x0af56000 0x400>,
+                  <0x0af57000 0x400>,
+                  <0x0af58000 0x400>,
+                  <0x0af59000 0x400>,
+                  <0x0af5a000 0x600>,
+                  <0x0af5b000 0x600>;
 
             interrupts-extended = <&mdss 12>;
 

-- 
2.51.0