[PATCH v1] dt-bindings: usb: Fix EIC7700 USB reset's issue

[caohang@eswincomputing.com]

From: Hang Cao <caohang@eswincomputing.com>

The EIC7700 USB controller requires a USB PHY RESET operation.PHY RESET
operation was missed in the verification version, as it was performed in
ESWIN's U-Boot.

If a non-ESWIN provided loader is used, this issue will occur, resulting
in USB not work.This patch does not introduce any backward incompatibility
since the dts is not upstream yet.

Fixes: c640a4239db5 ("dt-bindings: usb: Add ESWIN EIC7700 USB controller")
Signed-off-by: Hang Cao <caohang@eswincomputing.com>
---
 .../devicetree/bindings/usb/eswin,eic7700-usb.yaml         | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/usb/eswin,eic7700-usb.yaml b/Documentation/devicetree/bindings/usb/eswin,eic7700-usb.yaml
index 41c3b1b98991..658260619423 100644
--- a/Documentation/devicetree/bindings/usb/eswin,eic7700-usb.yaml
+++ b/Documentation/devicetree/bindings/usb/eswin,eic7700-usb.yaml
@@ -41,12 +41,13 @@ properties:
       - const: usb_en

   resets:
-    maxItems: 2
+    maxItems: 3

   reset-names:
     items:
       - const: vaux
       - const: usb_rst
+      - const: usb_phy

   eswin,hsp-sp-csr:
     description:
@@ -85,8 +86,8 @@ examples:
         interrupt-parent = <&plic>;
         interrupts = <85>;
         interrupt-names = "peripheral";
-        resets = <&reset 84>, <&hspcrg 2>;
-        reset-names = "vaux", "usb_rst";
+        resets = <&reset 84>, <&hspcrg 2>, <&hspcrg 4>;
+        reset-names = "vaux", "usb_rst", "usb_phy";
         dr_mode = "peripheral";
         maximum-speed = "high-speed";
         phy_type = "utmi";
--
2.34.1