Re: [PATCH v6 19/21] arm64: dts: renesas: r9a09g047: Add vspd{0,1} nodes

[Laurent Pinchart <laurent.pinchart@ideasonboard.com>]

On Wed, Apr 08, 2026 at 12:37:04PM +0200, Tommaso Merciai wrote:
> Add vspd{0,1} nodes to RZ/G3E SoC DTSI.
> 
> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
> Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
> ---
> v5->v6:
>  - No changes.
> 
> v4->v5:
>  - No changes.
> 
> v3->v4:
>  - No changes.
> 
> v2->v3:
>  - No changes.
> 
> v1->v2:
>  - Squashed vspd0 and vspd1 patches into a single patch.
>  - Collected tags.
> 
>  arch/arm64/boot/dts/renesas/r9a09g047.dtsi | 28 ++++++++++++++++++++++
>  1 file changed, 28 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/renesas/r9a09g047.dtsi b/arch/arm64/boot/dts/renesas/r9a09g047.dtsi
> index 3115ab4b050f..f2fdaadd9d39 100644
> --- a/arch/arm64/boot/dts/renesas/r9a09g047.dtsi
> +++ b/arch/arm64/boot/dts/renesas/r9a09g047.dtsi
> @@ -1608,6 +1608,34 @@ fcpvd1: fcp@164a0000 {
>  			resets = <&cpg 0x11e>;
>  			power-domains = <&cpg>;
>  		};
> +
> +		vspd0: vsp@16480000 {
> +			compatible = "renesas,r9a09g047-vsp2",
> +				     "renesas,r9a07g044-vsp2";
> +			reg = <0 0x16480000 0 0x10000>;
> +			interrupts = <GIC_SPI 881 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&cpg CPG_MOD 0xed>,
> +				 <&cpg CPG_MOD 0xee>,
> +				 <&cpg CPG_MOD 0xef>;
> +			clock-names = "aclk", "pclk", "vclk";
> +			resets = <&cpg 0xdc>;
> +			power-domains = <&cpg>;
> +			renesas,fcp = <&fcpvd0>;
> +		};
> +
> +		vspd1: vsp@164b0000 {
> +			compatible = "renesas,r9a09g047-vsp2",
> +				     "renesas,r9a07g044-vsp2";
> +			reg = <0 0x164b0000 0 0x10000>;
> +			interrupts = <GIC_SPI 921 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&cpg CPG_MOD 0x1a8>,
> +				 <&cpg CPG_MOD 0x1a9>,
> +				 <&cpg CPG_MOD 0x1aa>;
> +			clock-names = "aclk", "pclk", "vclk";
> +			resets = <&cpg 0x11e>;
> +			power-domains = <&cpg>;
> +			renesas,fcp = <&fcpvd1>;
> +		};

This matches the documentation.

Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

>  	};
>  
>  	stmmac_axi_setup: stmmac-axi-config {

-- 
Regards,

Laurent Pinchart