Re: [PATCH v6 10/21] dt-bindings: display: renesas,rzg2l-du: Add support for RZ/G3E SoC

[Laurent Pinchart <laurent.pinchart@ideasonboard.com>]

On Wed, Apr 08, 2026 at 04:44:48PM +0200, Tommaso Merciai wrote:
> On 4/8/26 16:16, Laurent Pinchart wrote:
> > On Wed, Apr 08, 2026 at 04:02:14PM +0200, Tommaso Merciai wrote:
> >> On 4/8/26 14:24, Laurent Pinchart wrote:
> >>> On Wed, Apr 08, 2026 at 12:36:55PM +0200, Tommaso Merciai wrote:
> >>>> The RZ/G3E SoC has 2 LCD controllers (LCDC), each containing a Frame
> >>>> Compression Processor (FCPVD), a Video Signal Processor (VSPD), and a
> >>>> Display Unit (DU).
> >>>>
> >>>>    - LCDC0 supports DSI and LVDS (single or dual-channel) outputs.
> >>>>    - LCDC1 supports DSI, LVDS (single-channel), and RGB outputs.
> >>>>
> >>>> Add a new SoC-specific compatible string 'renesas,r9a09g047-du'.
> >>>>
> >>>> Extend patternProperties from "^port@[0-1]$" to "^port@[0-3]$" to
> >>>> allow up to four output ports, and explicitly disable port@2 and port@3
> >>>> for existing SoCs that do not expose them.
> >>>>
> >>>> Describe the four output ports of the RZ/G3E DU:
> >>>>
> >>>>    - port@0: DSI (available on both LCDC instances)
> >>>>    - port@1: DPAD / parallel RGB (LCDC1 only)
> >>>>    - port@2: LVDS channel 0 (LCDC0 only)
> >>>>    - port@3: LVDS channel 1 (available on both LCDC instances)
> >>>>
> >>>> Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
> >>>> ---
> >>>> v5->v6:
> >>>>    - Extend patternProperties from "^port@[0-1]$" to "^port@[0-3]$" and
> >>>>      explicitly disable port@2 and port@3 for existing SoCs that do not expose
> >>>>      them.
> >>>>    - Reworked ports numbering + improved/fixed ports descriptions in the
> >>>>      bindings documentation.
> >>>>    - Improved commit body.
> >>>>
> >>>> v4->v5:
> >>>>    - Dropped renesas,id property and updated bindings
> >>>>      accordingly.
> >>>>
> >>>> v2->v3:
> >>>>    - No changes.
> >>>>
> >>>> v2->v3:
> >>>>    - No changes.
> >>>>
> >>>> v1->v2:
> >>>>    - Use single compatible string instead of multiple compatible strings
> >>>>      for the two DU instances, leveraging a 'renesas,id' property to
> >>>>      differentiate between DU0 and DU1.
> >>>>    - Updated commit message accordingly.
> >>>>
> >>>>    .../bindings/display/renesas,rzg2l-du.yaml    | 30 ++++++++++++++++++-
> >>>>    1 file changed, 29 insertions(+), 1 deletion(-)
> >>>>
> >>>> diff --git a/Documentation/devicetree/bindings/display/renesas,rzg2l-du.yaml b/Documentation/devicetree/bindings/display/renesas,rzg2l-du.yaml
> >>>> index 5add3b832eab..32da0b5ec88c 100644
> >>>> --- a/Documentation/devicetree/bindings/display/renesas,rzg2l-du.yaml
> >>>> +++ b/Documentation/devicetree/bindings/display/renesas,rzg2l-du.yaml
> >>>> @@ -20,6 +20,7 @@ properties:
> >>>>          - enum:
> >>>>              - renesas,r9a07g043u-du # RZ/G2UL
> >>>>              - renesas,r9a07g044-du # RZ/G2{L,LC}
> >>>> +          - renesas,r9a09g047-du # RZ/G3E
> >>>>              - renesas,r9a09g057-du # RZ/V2H(P)
> >>>>          - items:
> >>>>              - enum:
> >>>> @@ -61,7 +62,7 @@ properties:
> >>>>          model-dependent. Each port shall have a single endpoint.
> >>>>    
> >>>>        patternProperties:
> >>>> -      "^port@[0-1]$":
> >>>> +      "^port@[0-3]$":
> >>>>            $ref: /schemas/graph.yaml#/properties/port
> >>>>            unevaluatedProperties: false
> >>>>    
> >>>> @@ -103,6 +104,8 @@ allOf:
> >>>>                port@0:
> >>>>                  description: DPI
> >>>>                port@1: false
> >>>> +            port@2: false
> >>>> +            port@3: false
> >>>>    
> >>>>              required:
> >>>>                - port@0
> >>>> @@ -119,6 +122,8 @@ allOf:
> >>>>                  description: DSI
> >>>>                port@1:
> >>>>                  description: DPI
> >>>> +            port@2: false
> >>>> +            port@3: false
> >>>>    
> >>>>              required:
> >>>>                - port@0
> >>>> @@ -135,9 +140,32 @@ allOf:
> >>>>                port@0:
> >>>>                  description: DSI
> >>>>                port@1: false
> >>>> +            port@2: false
> >>>> +            port@3: false
> >>>>    
> >>>>              required:
> >>>>                - port@0
> >>>> +  - if:
> >>>> +      properties:
> >>>> +        compatible:
> >>>> +          contains:
> >>>> +            const: renesas,r9a09g047-du
> >>>> +    then:
> >>>> +      properties:
> >>>> +        ports:
> >>>> +          properties:
> >>>> +            port@0:
> >>>> +              description: DSI
> >>>> +            port@1:
> >>>> +              description: DPAD
> >>>> +            port@2:
> >>>> +              description: LVDS, Channel 0
> >>>> +            port@3:
> >>>> +              description: LVDS, Channel 1
> >>>> +
> >>>> +          required:
> >>>> +            - port@0
> >>>> +            - port@3
> >>>
> >>> Why are ports 1 and 2 not required ?
> >>
> >> About this we had a similar discussion on v5[0]
> >> We are using the same compatible and:
> >>
> >> - LCDC0 supports DSI and LVDS (single or dual-channel) outputs.
> >> |
> >> --> then has:
> >> 	port@0
> >> 	port@2
> >> 	port@3
> >> 	
> >>
> >>    - LCDC1 supports DSI, LVDS (single-channel), and RGB outputs.
> >> |
> >> --> then has:
> >> 	port@0
> >> 	port@1
> >> 	port@3
> > 
> > Ah yes, I forget there are two LCDC instances with different output
> > configurations.
> > 
> > Something still looks a bit weird to me though. For LCDC1, which
> > supports a single LVDS channel, you use the port described as the second
> > LVDS channel. Is there a reason not to use port@2 ?
> 
> 9.11 Low Voltage Differential Signaling (LVDS)
> 9.11.1.2 Block Diagram
> Figure 9.11-1 shows a block diagram of LVDS.
> 
> LCDC1 is connected to LVDS, Channel 1
> For this reason I'm using port@3.

Re-reading that, I think I've misinterpreted the hardware architecture.
Doesn't the DU have a single output, that is connected the multiple
encoders (LVDS and DSI for LCDC0 and LVDS, DSI and DPI for LCDC1) ? It
seems modelling it with a single port and multiple endpoints would
better match the device.

For LVDS in particular, I see a single LVDS encoder with two channels,
so there should not be two LVDS output ports in the DU. The two ports
should be on the output of the LVDS device.

> >> Then port@1 is required for DU1 but not for DU0.
> >> Same port@2 is required for DU0 but not for DU1.
> >>
> >> [0] https://patchwork.kernel.org/project/linux-renesas-soc/patch/ca022fdbba5236c36e0cb3095db4c31e8e0cb1b8.1770996493.git.tommaso.merciai.xr@bp.renesas.com/
> >>
> >>>>
> >>>>    examples:
> >>>>      # RZ/G2L DU

-- 
Regards,

Laurent Pinchart