Re: [PATCH v7 1/6] dt-bindings: iio: adc: add AD4691 family

[Conor Dooley <conor@kernel.org>]

[-- Attachment #1: Type: text/plain, Size: 3184 bytes --]

On Thu, Apr 09, 2026 at 06:28:22PM +0300, Radu Sabau via B4 Relay wrote:
> From: Radu Sabau <radu.sabau@analog.com>
> 
> Add DT bindings for the Analog Devices AD4691 family of multichannel
> SAR ADCs (AD4691, AD4692, AD4693, AD4694).
> 
> The binding describes the hardware connections:
> 
> - Power domains: avdd-supply (required), vio-supply, ref-supply or
>   refin-supply (external reference; the REFIN path enables the
>   internal reference buffer), and an optional ldo-in-supply, that if
>   absent, means the on-chip internal LDO will be used.
> 
> - Optional PWM on the CNV pin selects CNV Burst Mode; when absent,
>   Manual Mode is assumed with CNV tied to SPI CS.
> 
> - An optional reset GPIO (reset-gpios) for hardware reset.
> 
> - Up to four GP pins (gp0..gp3) usable as interrupt sources,
>   identified in firmware via interrupt-names "gp0".."gp3".
> 
> - gpio-controller with #gpio-cells = <2> for GP pin GPIO usage.
> 
> - #trigger-source-cells = <1>: one cell selecting the GP pin number
>   (0-3) used as the SPI offload trigger source.
> 
> Two binding examples are provided: CNV Burst Mode with SPI offload
> (DMA data acquisition driven by DATA_READY on a GP pin), and Manual
> Mode for CPU-driven triggered-buffer or single-shot capture.
> 
> Signed-off-by: Radu Sabau <radu.sabau@analog.com>
> ---
>  .../devicetree/bindings/iio/adc/adi,ad4691.yaml    | 162 +++++++++++++++++++++
>  MAINTAINERS                                        |   7 +
>  2 files changed, 169 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad4691.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad4691.yaml
> new file mode 100644
> index 000000000000..81d2ca4e0e22
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad4691.yaml
> @@ -0,0 +1,162 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iio/adc/adi,ad4691.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Analog Devices AD4691 Family Multichannel SAR ADCs
> +
> +maintainers:
> +  - Radu Sabau <radu.sabau@analog.com>
> +
> +description: |
> +  The AD4691 family are high-speed, low-power, multichannel successive
> +  approximation register (SAR) analog-to-digital converters (ADCs) with
> +  an SPI-compatible serial interface. The ADC supports CNV Burst Mode,
> +  where an external PWM drives the CNV pin, and Manual Mode, where CNV
> +  is directly tied to the SPI chip-select.
> +
> +  Datasheets:
> +    * https://www.analog.com/en/products/ad4691.html
> +    * https://www.analog.com/en/products/ad4692.html
> +    * https://www.analog.com/en/products/ad4693.html
> +    * https://www.analog.com/en/products/ad4694.html
> +
> +$ref: /schemas/spi/spi-peripheral-props.yaml#
> +
> +properties:
> +  compatible:
> +    enum:
> +      - adi,ad4691
> +      - adi,ad4692
> +      - adi,ad4693
> +      - adi,ad4694

Please add a note to the commit message about why these devices are not
compatible. With that,
Acked-by: Conor Dooley <conor.dooley@microchip.com>
pw-bot: not-applicable

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]