[PATCH v2 2/2] arm64: dts: qcom: monaco: Add iface clock and power domain for ice sdhc

[Kuldeep Singh <kuldeep.singh@oss.qualcomm.com>]

Qualcomm in-line crypto engine (ICE) platform driver specifies and votes
for its own resources. Before accessing ICE hardware during probe, to
avoid potential unclocked register access issues (when clk_ignore_unused
is not passed on the kernel command line), in addition to the 'core'
clock the 'iface' clock should also be turned on by the driver. This can
only be done if power domain is enabled.

Specify both power domain and the iface clock.

Signed-off-by: Kuldeep Singh <kuldeep.singh@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/monaco.dtsi | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/monaco.dtsi b/arch/arm64/boot/dts/qcom/monaco.dtsi
index 5fd289669353..8192d6b94305 100644
--- a/arch/arm64/boot/dts/qcom/monaco.dtsi
+++ b/arch/arm64/boot/dts/qcom/monaco.dtsi
@@ -4873,7 +4873,11 @@ sdhc_ice: crypto@87c8000 {
 			compatible = "qcom,qcs8300-inline-crypto-engine",
 				     "qcom,inline-crypto-engine";
 			reg = <0x0 0x087c8000 0x0 0x18000>;
-			clocks = <&gcc GCC_SDCC1_ICE_CORE_CLK>;
+			clocks = <&gcc GCC_SDCC1_ICE_CORE_CLK>,
+				 <&gcc GCC_SDCC1_AHB_CLK>;
+			clock-names = "core",
+				      "iface";
+			power-domains = <&rpmhpd RPMHPD_CX>;
 		};
 
 		usb_1_hsphy: phy@8904000 {

-- 
2.34.1