[PATCH v2 1/2] arm64: dts: qcom: x1e80100-microsoft-romulus: add PM8010 camera regulators

[Oliver White <oliverjwhite07@gmail.com>]

Add the PM8010 regulator outputs used by the front-facing OV02C10
camera module on Microsoft Romulus.

These rails provide the supplies referenced by the camera enablement patch.

Signed-off-by: Oliver White <oliverjwhite07@gmail.com>
---
 .../dts/qcom/x1e80100-microsoft-romulus.dtsi  | 52 +++++++++++++++++++
 1 file changed, 52 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/x1e80100-microsoft-romulus.dtsi b/arch/arm64/boot/dts/qcom/x1e80100-microsoft-romulus.dtsi
index 14b5663a4d48..4427ecae423f 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100-microsoft-romulus.dtsi
+++ b/arch/arm64/boot/dts/qcom/x1e80100-microsoft-romulus.dtsi
@@ -857,6 +857,57 @@ vreg_l3j: ldo3 {
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 	};
+
+	regulators-8 {
+		compatible = "qcom,pm8010-rpmh-regulators";
+		qcom,pmic-id = "m";
+
+		vdd-l1-l2-supply = <&vreg_s5j>;
+		vdd-l3-l4-supply = <&vreg_s4c>;
+		vdd-l7-supply = <&vreg_bob1>;
+
+		vreg_l1m_1p2: ldo1 {
+			regulator-name = "vreg_l1m_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1260000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2m_1p2: ldo2 {
+			regulator-name = "vreg_l2m_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1260000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3m_1p8: ldo3 {
+			regulator-name = "vreg_l3m_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1900000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4m_1p8: ldo4 {
+			regulator-name = "vreg_l4m_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1900000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5m_2p8: ldo5 {
+			regulator-name = "vreg_l5m_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7m_2p8: ldo7 {
+			regulator-name = "vreg_l7m_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
 };
 
 &gpu {
@@ -867,6 +918,7 @@ &gpu_zap_shader {
 	firmware-name = "qcom/x1e80100/microsoft/qcdxkmsuc8380.mbn";
 };
 
+
 &i2c0 {
 	clock-frequency = <100000>;
 
-- 
2.51.0