From: Shuwei Wu <shuwei.wu@mailbox.org>
To: "Rafael J. Wysocki" <rafael@kernel.org>,
Viresh Kumar <viresh.kumar@linaro.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Paul Walmsley <pjw@kernel.org>,
Palmer Dabbelt <palmer@dabbelt.com>,
Albert Ou <aou@eecs.berkeley.edu>,
Alexandre Ghiti <alex@ghiti.fr>, Yixun Lan <dlan@kernel.org>,
Yixun Lan <dlan@kernel.org>
Cc: linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-riscv@lists.infradead.org, spacemit@lists.linux.dev,
devicetree@vger.kernel.org, Shuwei Wu <shuwei.wu@mailbox.org>
Subject: [PATCH v2 2/2] riscv: dts: spacemit: Add cpu scaling for K1 SoC
Date: Fri, 10 Apr 2026 15:58:23 +0800 [thread overview]
Message-ID: <20260410-shadow-deps-v2-2-4e16b8c0f60e@mailbox.org> (raw)
In-Reply-To: <20260410-shadow-deps-v2-0-4e16b8c0f60e@mailbox.org>
Add Operating Performance Points (OPP) tables and CPU clock properties
for the two clusters in the SpacemiT K1 SoC.
Also assign the CPU power supply (cpu-supply) for the Banana Pi BPI-F3
board to fully enable CPU DVFS.
Signed-off-by: Shuwei Wu <shuwei.wu@mailbox.org>
---
Changes in v2:
- Add k1-opp.dtsi with OPP tables for both CPU clusters
- Assign CPU supplies and include OPP table for Banana Pi BPI-F3
---
arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts | 35 +++++++-
arch/riscv/boot/dts/spacemit/k1-opp.dtsi | 105 ++++++++++++++++++++++++
arch/riscv/boot/dts/spacemit/k1.dtsi | 8 ++
3 files changed, 147 insertions(+), 1 deletion(-)
diff --git a/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts b/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts
index 444c3b1e6f44..3780593f610d 100644
--- a/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts
+++ b/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts
@@ -5,6 +5,7 @@
#include "k1.dtsi"
#include "k1-pinctrl.dtsi"
+#include "k1-opp.dtsi"
/ {
model = "Banana Pi BPI-F3";
@@ -86,6 +87,38 @@ &combo_phy {
status = "okay";
};
+&cpu_0 {
+ cpu-supply = <&buck1_3v45>;
+};
+
+&cpu_1 {
+ cpu-supply = <&buck1_3v45>;
+};
+
+&cpu_2 {
+ cpu-supply = <&buck1_3v45>;
+};
+
+&cpu_3 {
+ cpu-supply = <&buck1_3v45>;
+};
+
+&cpu_4 {
+ cpu-supply = <&buck1_3v45>;
+};
+
+&cpu_5 {
+ cpu-supply = <&buck1_3v45>;
+};
+
+&cpu_6 {
+ cpu-supply = <&buck1_3v45>;
+};
+
+&cpu_7 {
+ cpu-supply = <&buck1_3v45>;
+};
+
&emmc {
bus-width = <8>;
mmc-hs400-1_8v;
@@ -201,7 +234,7 @@ pmic@41 {
dldoin2-supply = <&buck5>;
regulators {
- buck1 {
+ buck1_3v45: buck1 {
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <3450000>;
regulator-ramp-delay = <5000>;
diff --git a/arch/riscv/boot/dts/spacemit/k1-opp.dtsi b/arch/riscv/boot/dts/spacemit/k1-opp.dtsi
new file mode 100644
index 000000000000..768ae390686d
--- /dev/null
+++ b/arch/riscv/boot/dts/spacemit/k1-opp.dtsi
@@ -0,0 +1,105 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/ {
+ cluster0_opp_table: opp-table-cluster0 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-614400000 {
+ opp-hz = /bits/ 64 <614400000>;
+ opp-microvolt = <950000>;
+ clock-latency-ns = <200000>;
+ };
+
+ opp-819000000 {
+ opp-hz = /bits/ 64 <819000000>;
+ opp-microvolt = <950000>;
+ clock-latency-ns = <200000>;
+ };
+
+ opp-1000000000 {
+ opp-hz = /bits/ 64 <1000000000>;
+ opp-microvolt = <950000>;
+ clock-latency-ns = <200000>;
+ };
+
+ opp-1228800000 {
+ opp-hz = /bits/ 64 <1228800000>;
+ opp-microvolt = <950000>;
+ clock-latency-ns = <200000>;
+ };
+
+ opp-1600000000 {
+ opp-hz = /bits/ 64 <1600000000>;
+ opp-microvolt = <1050000>;
+ clock-latency-ns = <200000>;
+ };
+ };
+
+ cluster1_opp_table: opp-table-cluster1 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-614400000 {
+ opp-hz = /bits/ 64 <614400000>;
+ opp-microvolt = <950000>;
+ clock-latency-ns = <200000>;
+ };
+
+ opp-819000000 {
+ opp-hz = /bits/ 64 <819000000>;
+ opp-microvolt = <950000>;
+ clock-latency-ns = <200000>;
+ };
+
+ opp-1000000000 {
+ opp-hz = /bits/ 64 <1000000000>;
+ opp-microvolt = <950000>;
+ clock-latency-ns = <200000>;
+ };
+
+ opp-1228800000 {
+ opp-hz = /bits/ 64 <1228800000>;
+ opp-microvolt = <950000>;
+ clock-latency-ns = <200000>;
+ };
+
+ opp-1600000000 {
+ opp-hz = /bits/ 64 <1600000000>;
+ opp-microvolt = <1050000>;
+ clock-latency-ns = <200000>;
+ };
+ };
+};
+
+&cpu_0 {
+ operating-points-v2 = <&cluster0_opp_table>;
+};
+
+&cpu_1 {
+ operating-points-v2 = <&cluster0_opp_table>;
+};
+
+&cpu_2 {
+ operating-points-v2 = <&cluster0_opp_table>;
+};
+
+&cpu_3 {
+ operating-points-v2 = <&cluster0_opp_table>;
+};
+
+&cpu_4 {
+ operating-points-v2 = <&cluster1_opp_table>;
+};
+
+&cpu_5 {
+ operating-points-v2 = <&cluster1_opp_table>;
+};
+
+&cpu_6 {
+ operating-points-v2 = <&cluster1_opp_table>;
+};
+
+&cpu_7 {
+ operating-points-v2 = <&cluster1_opp_table>;
+};
diff --git a/arch/riscv/boot/dts/spacemit/k1.dtsi b/arch/riscv/boot/dts/spacemit/k1.dtsi
index 529ec68e9c23..bdd109b81730 100644
--- a/arch/riscv/boot/dts/spacemit/k1.dtsi
+++ b/arch/riscv/boot/dts/spacemit/k1.dtsi
@@ -54,6 +54,7 @@ cpu_0: cpu@0 {
compatible = "spacemit,x60", "riscv";
device_type = "cpu";
reg = <0>;
+ clocks = <&syscon_apmu CLK_CPU_C0_CORE>;
riscv,isa = "rv64imafdcbv_zicbom_zicbop_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zba_zbb_zbc_zbs_zkt_zvfh_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt";
riscv,isa-base = "rv64i";
riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "b", "v", "zicbom",
@@ -84,6 +85,7 @@ cpu_1: cpu@1 {
compatible = "spacemit,x60", "riscv";
device_type = "cpu";
reg = <1>;
+ clocks = <&syscon_apmu CLK_CPU_C0_CORE>;
riscv,isa = "rv64imafdcbv_zicbom_zicbop_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zba_zbb_zbc_zbs_zkt_zvfh_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt";
riscv,isa-base = "rv64i";
riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "b", "v", "zicbom",
@@ -114,6 +116,7 @@ cpu_2: cpu@2 {
compatible = "spacemit,x60", "riscv";
device_type = "cpu";
reg = <2>;
+ clocks = <&syscon_apmu CLK_CPU_C0_CORE>;
riscv,isa = "rv64imafdcbv_zicbom_zicbop_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zba_zbb_zbc_zbs_zkt_zvfh_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt";
riscv,isa-base = "rv64i";
riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "b", "v", "zicbom",
@@ -144,6 +147,7 @@ cpu_3: cpu@3 {
compatible = "spacemit,x60", "riscv";
device_type = "cpu";
reg = <3>;
+ clocks = <&syscon_apmu CLK_CPU_C0_CORE>;
riscv,isa = "rv64imafdcbv_zicbom_zicbop_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zba_zbb_zbc_zbs_zkt_zvfh_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt";
riscv,isa-base = "rv64i";
riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "b", "v", "zicbom",
@@ -174,6 +178,7 @@ cpu_4: cpu@4 {
compatible = "spacemit,x60", "riscv";
device_type = "cpu";
reg = <4>;
+ clocks = <&syscon_apmu CLK_CPU_C1_CORE>;
riscv,isa = "rv64imafdcbv_zicbom_zicbop_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zba_zbb_zbc_zbs_zkt_zvfh_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt";
riscv,isa-base = "rv64i";
riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "b", "v", "zicbom",
@@ -204,6 +209,7 @@ cpu_5: cpu@5 {
compatible = "spacemit,x60", "riscv";
device_type = "cpu";
reg = <5>;
+ clocks = <&syscon_apmu CLK_CPU_C1_CORE>;
riscv,isa = "rv64imafdcbv_zicbom_zicbop_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zba_zbb_zbc_zbs_zkt_zvfh_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt";
riscv,isa-base = "rv64i";
riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "b", "v", "zicbom",
@@ -234,6 +240,7 @@ cpu_6: cpu@6 {
compatible = "spacemit,x60", "riscv";
device_type = "cpu";
reg = <6>;
+ clocks = <&syscon_apmu CLK_CPU_C1_CORE>;
riscv,isa = "rv64imafdcbv_zicbom_zicbop_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zba_zbb_zbc_zbs_zkt_zvfh_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt";
riscv,isa-base = "rv64i";
riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "b", "v", "zicbom",
@@ -264,6 +271,7 @@ cpu_7: cpu@7 {
compatible = "spacemit,x60", "riscv";
device_type = "cpu";
reg = <7>;
+ clocks = <&syscon_apmu CLK_CPU_C1_CORE>;
riscv,isa = "rv64imafdcbv_zicbom_zicbop_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zba_zbb_zbc_zbs_zkt_zvfh_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt";
riscv,isa-base = "rv64i";
riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "b", "v", "zicbom",
--
2.53.0
prev parent reply other threads:[~2026-04-10 7:59 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-04-10 7:58 [PATCH v2 0/2] cpufreq: spacemit: Add cpufreq support for K1 SoC Shuwei Wu
2026-04-10 7:58 ` [PATCH v2 1/2] cpufreq: dt-platdev: Add SpacemiT K1 SoC to the allowlist Shuwei Wu
2026-04-10 7:58 ` Shuwei Wu [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260410-shadow-deps-v2-2-4e16b8c0f60e@mailbox.org \
--to=shuwei.wu@mailbox.org \
--cc=alex@ghiti.fr \
--cc=aou@eecs.berkeley.edu \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dlan@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=palmer@dabbelt.com \
--cc=pjw@kernel.org \
--cc=rafael@kernel.org \
--cc=robh@kernel.org \
--cc=spacemit@lists.linux.dev \
--cc=viresh.kumar@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox