[PATCH v2 13/21] drm/panel: jadard-jd9365da-h3: set prepare_prev_first

[Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>]

Sending DSI commands from the prepare() callback requires DSI link to be
up at that point. For DSI hosts is guaranteed only if the panel driver
sets the .prepare_prev_first flag. Set it to let these panels work with
the DSI hosts which don't power on the link in their .mode_set callback.

Reviewed-by: Linus Walleij <linusw@kernel.org>
Tested-by: Riccardo Mereu <r.mereu@arduino.cc>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
---
 drivers/gpu/drm/panel/panel-jadard-jd9365da-h3.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/gpu/drm/panel/panel-jadard-jd9365da-h3.c b/drivers/gpu/drm/panel/panel-jadard-jd9365da-h3.c
index 5d9db2e1f28f..11b7e07c1af8 100644
--- a/drivers/gpu/drm/panel/panel-jadard-jd9365da-h3.c
+++ b/drivers/gpu/drm/panel/panel-jadard-jd9365da-h3.c
@@ -1652,6 +1652,8 @@ static int jadard_dsi_probe(struct mipi_dsi_device *dsi)
 	if (ret)
 		return ret;
 
+	jadard->panel.prepare_prev_first = true;
+
 	drm_panel_add(&jadard->panel);
 
 	mipi_dsi_set_drvdata(dsi, jadard);

-- 
2.47.3