From: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
To: Neil Armstrong <neil.armstrong@linaro.org>,
Jessica Zhang <jesszhan0024@gmail.com>,
David Airlie <airlied@gmail.com>, Simona Vetter <simona@ffwll.ch>,
Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
Maxime Ripard <mripard@kernel.org>,
Thomas Zimmermann <tzimmermann@suse.de>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Cong Yang <yangcong5@huaqin.corp-partner.google.com>,
Ondrej Jirman <megi@xff.cz>,
Javier Martinez Canillas <javierm@redhat.com>,
Jagan Teki <jagan@edgeble.ai>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>,
Linus Walleij <linusw@kernel.org>,
Bartosz Golaszewski <brgl@kernel.org>
Cc: dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org
Subject: [PATCH v2 07/21] drm/panel: himax-hx83102: support Waveshare 12.3" DSI panel
Date: Sat, 11 Apr 2026 15:10:27 +0300 [thread overview]
Message-ID: <20260411-waveshare-dsi-touch-v2-7-75cdbeac5156@oss.qualcomm.com> (raw)
In-Reply-To: <20260411-waveshare-dsi-touch-v2-0-75cdbeac5156@oss.qualcomm.com>
Add support for the Waveshare 12.3" DSI TOUCH-A panel. According to the
vendor driver, it uses different mode_flags, so let the panel
descriptions override driver-wide defaults.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
---
drivers/gpu/drm/panel/panel-himax-hx83102.c | 144 +++++++++++++++++++++++++++-
1 file changed, 142 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/panel/panel-himax-hx83102.c b/drivers/gpu/drm/panel/panel-himax-hx83102.c
index 8b2a68ee851e..eab67893da86 100644
--- a/drivers/gpu/drm/panel/panel-himax-hx83102.c
+++ b/drivers/gpu/drm/panel/panel-himax-hx83102.c
@@ -29,11 +29,14 @@
#define HX83102_UNKNOWN_B8 0xb8
#define HX83102_SETEXTC 0xb9
#define HX83102_SETMIPI 0xba
+#define HX83102_UNKNOWN_BB 0xbb
#define HX83102_SETVDC 0xbc
#define HX83102_SETBANK 0xbd
#define HX83102_UNKNOWN_BE 0xbe
#define HX83102_SETPTBA 0xbf
#define HX83102_SETSTBA 0xc0
+#define HX83102_UNKNOWN_C2 0xc2
+#define HX83102_UNKNOWN_C6 0xc6
#define HX83102_SETTCON 0xc7
#define HX83102_SETRAMDMY 0xc8
#define HX83102_SETPWM 0xc9
@@ -78,6 +81,7 @@ struct hx83102_panel_desc {
} size;
bool has_backlight;
+ unsigned long mode_flags;
int (*init)(struct hx83102 *ctx);
};
@@ -765,6 +769,111 @@ static int holitech_htf065h045_init(struct hx83102 *ctx)
return dsi_ctx.accum_err;
}
+/* This is HX83102-E, assuming commands are the same as the normal HX83102 */
+static int waveshare_12_3_a_init(struct hx83102 *ctx)
+{
+ struct mipi_dsi_multi_context dsi_ctx = { .dsi = ctx->dsi };
+
+ mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETEXTC, 0x83, 0x10, 0x2e);
+
+ mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETSPCCMD, 0xcd);
+ mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_UNKNOWN_BB, 0x01);
+ mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETSPCCMD, 0x00);
+ mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETPCTRL, 0x67, 0x2c, 0xff, 0x05);
+ mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_UNKNOWN_BE, 0x11, 0x96, 0x89);
+ mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_UNKNOWN_D9, 0x04, 0x03, 0x04);
+ mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETPOWER,
+ 0x10, 0xfa, 0xaf, 0xaf, 0x33, 0x33, 0xb1, 0x4d, 0x2f, 0x36,
+ 0x36, 0x36, 0x36, 0x22, 0x21, 0x15, 0x00);
+ mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETDISP,
+ 0x00, 0xd0, 0x27, 0x80, 0x00, 0x14, 0x40, 0x2c, 0x32, 0x02,
+ 0x00, 0x00, 0x15, 0x20, 0xd7, 0x00);
+ mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETCYC,
+ 0x98, 0xa0, 0x01, 0x01, 0x98, 0xa0, 0x68, 0x50, 0x01, 0xc7,
+ 0x01, 0x58, 0x00, 0xff, 0x00, 0xff);
+ mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_UNKNOWN_B6, 0x4d, 0x4d, 0xe3);
+ mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETPTBA, 0xfc, 0x85, 0x80);
+ mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_UNKNOWN_D2, 0x33, 0x33);
+ mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETGIP0,
+ 0x00, 0x00, 0x00, 0x00, 0x64, 0x04, 0x00, 0x08, 0x08, 0x27,
+ 0x27, 0x22, 0x2f, 0x15, 0x15, 0x04, 0x04, 0x32, 0x10, 0x13,
+ 0x00, 0x13, 0x32, 0x10, 0x1f, 0x00,
+ 0x02, 0x32, 0x17, 0xfd, 0x00, 0x10, 0x00, 0x00, 0x20,
+ 0x30, 0x01, 0x55, 0x21, 0x38, 0x01, 0x55, 0x0f);
+ mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETGMA,
+ 0x00, 0x0c, 0x1a, 0x23, 0x2b, 0x4f, 0x64, 0x69, 0x6c, 0x64,
+ 0x77, 0x77, 0x76, 0x80, 0x79, 0x7e, 0x85, 0x9a, 0x97, 0x4d,
+ 0x56, 0x64, 0x70, 0x00, 0x0c, 0x1a, 0x23, 0x2b, 0x4f, 0x64,
+ 0x69, 0x6c, 0x64, 0x77, 0x77, 0x76, 0x80, 0x79, 0x7e, 0x85,
+ 0x9a, 0x97, 0x4d, 0x56, 0x64, 0x76);
+
+ mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETBANK, 0x01);
+ mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETPOWER, 0x01, 0x9b, 0x01, 0x31);
+ mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETCLOCK,
+ 0x80, 0x36, 0x12, 0x16, 0xc0, 0x28, 0x40, 0x84, 0x22);
+ mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETGIP0,
+ 0x01, 0x00, 0xfc, 0x00, 0x00, 0x11, 0x10, 0x00, 0x0e, 0x00,
+ 0x01);
+
+ mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETBANK, 0x02);
+ mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETCYC, 0x4e, 0x00, 0x33, 0x11, 0x33, 0x88);
+ mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETPTBA, 0xf2, 0x00, 0x02);
+
+ mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETBANK, 0x00);
+ mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETSTBA,
+ 0x23, 0x23, 0x22, 0x11, 0xa2, 0x17, 0x00, 0x80, 0x00, 0x00,
+ 0x08, 0x00, 0x63, 0x63);
+ mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_UNKNOWN_C6, 0xf9);
+ mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETTCON, 0x30);
+ mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETRAMDMY,
+ 0x00, 0x04, 0x04, 0x00, 0x00, 0x82, 0x13, 0x01);
+ mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETCASCADE, 0x07, 0x04, 0x05);
+ mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETGIP1,
+ 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x21, 0x20, 0x21, 0x20,
+ 0x01, 0x00, 0x03, 0x02, 0x05, 0x04, 0x07, 0x06, 0x1a, 0x1a,
+ 0x1a, 0x1a, 0x9a, 0x9a, 0x9a, 0x9a, 0x18, 0x18, 0x18, 0x18,
+ 0x21, 0x20, 0x21, 0x20, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
+ 0x18, 0x18, 0x18, 0x18);
+ mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETGIP2,
+ 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x20, 0x21, 0x20, 0x21,
+ 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x1a, 0x1a,
+ 0x1a, 0x1a, 0x1a, 0x1a, 0x1a, 0x1a, 0x18, 0x18, 0x18, 0x18,
+ 0x20, 0x21, 0x20, 0x21, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98,
+ 0x98, 0x98, 0x98, 0x98);
+
+ mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETBANK, 0x01);
+ mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETTP1,
+ 0x00, 0x34, 0x01, 0x88, 0x0e, 0xbe, 0x0f);
+
+ mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETBANK, 0x00);
+ mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_UNKNOWN_C2, 0x43, 0xff, 0x10);
+ mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETPANEL, 0x02);
+
+ mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETBANK, 0x03);
+ mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETDISP, 0x80);
+
+ mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETBANK, 0x00);
+ mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETGIP3,
+ 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa,
+ 0xaa, 0xaa, 0xaa, 0x80, 0x2a, 0xaa, 0xaa, 0xaa, 0xaa, 0x80,
+ 0x2a, 0xaa, 0xaa, 0xaa);
+
+ mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETBANK, 0x01);
+ mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETGIP3,
+ 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa,
+ 0xaa, 0xaa);
+
+ mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETBANK, 0x02);
+ mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETGIP3,
+ 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xf0, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xf0);
+
+ mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETBANK, 0x00);
+
+ return dsi_ctx.accum_err;
+};
+
static const struct drm_display_mode starry_mode = {
.clock = 162680,
.hdisplay = 1200,
@@ -920,6 +1029,30 @@ static const struct hx83102_panel_desc holitech_htf065h045_desc = {
.init = holitech_htf065h045_init,
};
+static const struct drm_display_mode waveshare_12_3_a_mode = {
+ .clock = 95000,
+ .hdisplay = 720,
+ .hsync_start = 720 + 10,
+ .hsync_end = 720 + 10 + 10,
+ .htotal = 720 + 10 + 10 + 12,
+ .vdisplay = 1920,
+ .vsync_start = 1920 + 64,
+ .vsync_end = 1920 + 64 + 18,
+ .vtotal = 1920 + 64 + 18 + 4,
+ .type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED,
+};
+
+static const struct hx83102_panel_desc waveshare_12_3_inch_a_desc = {
+ .modes = &waveshare_12_3_a_mode,
+ .size = {
+ .width_mm = 109,
+ .height_mm = 292,
+ },
+ .mode_flags = MIPI_DSI_MODE_VIDEO_HSE | MIPI_DSI_MODE_VIDEO |
+ MIPI_DSI_MODE_LPM | MIPI_DSI_CLOCK_NON_CONTINUOUS,
+ .init = waveshare_12_3_a_init,
+};
+
static int hx83102_enable(struct drm_panel *panel)
{
msleep(130);
@@ -1168,8 +1301,12 @@ static int hx83102_probe(struct mipi_dsi_device *dsi)
desc = of_device_get_match_data(&dsi->dev);
dsi->lanes = 4;
dsi->format = MIPI_DSI_FMT_RGB888;
- dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_SYNC_PULSE |
- MIPI_DSI_MODE_LPM;
+ if (desc->mode_flags)
+ dsi->mode_flags = desc->mode_flags;
+ else
+ dsi->mode_flags = MIPI_DSI_MODE_VIDEO |
+ MIPI_DSI_MODE_VIDEO_SYNC_PULSE |
+ MIPI_DSI_MODE_LPM;
ctx->desc = desc;
ctx->dsi = dsi;
ret = hx83102_panel_add(ctx);
@@ -1220,6 +1357,9 @@ static const struct of_device_id hx83102_of_match[] = {
{ .compatible = "holitech,htf065h045",
.data = &holitech_htf065h045_desc
},
+ { .compatible = "waveshare,12.3-dsi-touch-a",
+ .data = &waveshare_12_3_inch_a_desc
+ },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, hx83102_of_match);
--
2.47.3
next prev parent reply other threads:[~2026-04-11 12:11 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-04-11 12:10 [PATCH v2 00/21] drm/panel: support Waveshare DSI TOUCH kits Dmitry Baryshkov
2026-04-11 12:10 ` [PATCH v2 01/21] dt-bindings: display/panel: himax,hx83102: describe Waveshare panel Dmitry Baryshkov
2026-04-11 12:10 ` [PATCH v2 02/21] dt-bindings: display/panel: himax,hx8394: " Dmitry Baryshkov
2026-04-11 12:10 ` [PATCH v2 03/21] dt-bindings: display/panel: jadard,jd9365da-h3: " Dmitry Baryshkov
2026-04-11 12:10 ` [PATCH v2 04/21] dt-bindings: display/panel: ilitek,ili9881c: " Dmitry Baryshkov
2026-04-11 12:10 ` [PATCH v2 05/21] dt-bindings: dipslay/panel: describe panels using Focaltech OTA7290B Dmitry Baryshkov
2026-04-11 14:02 ` Rob Herring (Arm)
2026-04-11 12:10 ` [PATCH v2 06/21] drm/of: add helper to count data-lanes on a remote endpoint Dmitry Baryshkov
2026-04-11 12:10 ` Dmitry Baryshkov [this message]
2026-04-11 12:10 ` [PATCH v2 08/21] drm/panel: himax-hx8394: set prepare_prev_first Dmitry Baryshkov
2026-04-11 12:10 ` [PATCH v2 09/21] drm/panel: himax-hx8394: simplify hx8394_enable() Dmitry Baryshkov
2026-04-11 12:10 ` [PATCH v2 10/21] drm/panel: himax-hx8394: support Waveshare DSI panels Dmitry Baryshkov
2026-04-11 12:10 ` [PATCH v2 11/21] drm/panel: jadard-jd9365da-h3: use drm_connector_helper_get_modes_fixed Dmitry Baryshkov
2026-04-11 12:10 ` [PATCH v2 12/21] drm/panel: jadard-jd9365da-h3: support variable DSI configuration Dmitry Baryshkov
2026-04-11 12:10 ` [PATCH v2 13/21] drm/panel: jadard-jd9365da-h3: set prepare_prev_first Dmitry Baryshkov
2026-04-11 12:10 ` [PATCH v2 14/21] drm/panel: jadard-jd9365da-h3: support Waveshare round DSI panels Dmitry Baryshkov
2026-04-11 12:10 ` [PATCH v2 15/21] drm/panel: jadard-jd9365da-h3: support Waveshare WXGA " Dmitry Baryshkov
2026-04-11 12:10 ` [PATCH v2 16/21] drm/panel: jadard-jd9365da-h3: support Waveshare 720p " Dmitry Baryshkov
2026-04-11 12:10 ` [PATCH v2 17/21] drm/panel: ilitek-ili9881c: support Waveshare 7.0" DSI panel Dmitry Baryshkov
2026-04-11 12:10 ` [PATCH v2 18/21] drm/panel: add devm_drm_panel_add() helper Dmitry Baryshkov
2026-04-11 12:10 ` [PATCH v2 19/21] drm/panel: add driver for Waveshare 8.8" DSI TOUCH-A panel Dmitry Baryshkov
2026-04-11 12:10 ` [PATCH v2 20/21] dt-bindings: gpio: describe Waveshare GPIO controller Dmitry Baryshkov
2026-04-11 12:10 ` [PATCH v2 21/21] gpio: add GPIO controller found on Waveshare DSI TOUCH panels Dmitry Baryshkov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260411-waveshare-dsi-touch-v2-7-75cdbeac5156@oss.qualcomm.com \
--to=dmitry.baryshkov@oss.qualcomm.com \
--cc=airlied@gmail.com \
--cc=brgl@kernel.org \
--cc=broonie@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=jagan@edgeble.ai \
--cc=javierm@redhat.com \
--cc=jesszhan0024@gmail.com \
--cc=krzk+dt@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linusw@kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=maarten.lankhorst@linux.intel.com \
--cc=megi@xff.cz \
--cc=mripard@kernel.org \
--cc=neil.armstrong@linaro.org \
--cc=robh@kernel.org \
--cc=simona@ffwll.ch \
--cc=tzimmermann@suse.de \
--cc=yangcong5@huaqin.corp-partner.google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox