[PATCH v2 7/7] arm64: dts: qcom: sc7180: Add QSPI memory interconnect path

[Viken Dadhaniya <viken.dadhaniya@oss.qualcomm.com>]

Add the missing QSPI-to-memory interconnect path alongside the existing
configuration path. Without this path, the interconnect framework cannot
correctly vote for the bandwidth required by QSPI DMA data transfers.

Signed-off-by: Viken Dadhaniya <viken.dadhaniya@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/sc7180.dtsi | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 45b9864e3304..0efcda80ac94 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -2864,9 +2864,12 @@ qspi: spi@88dc000 {
 			clocks = <&gcc GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
 				 <&gcc GCC_QSPI_CORE_CLK>;
 			clock-names = "iface", "core";
-			interconnects = <&gem_noc MASTER_APPSS_PROC 0
-					&config_noc SLAVE_QSPI_0 0>;
-			interconnect-names = "qspi-config";
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_QSPI_0 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&aggre1_noc MASTER_QSPI QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>;
+			interconnect-names = "qspi-config",
+					     "qspi-memory";
 			power-domains = <&rpmhpd SC7180_CX>;
 			operating-points-v2 = <&qspi_opp_table>;
 			status = "disabled";

-- 
2.34.1