From: Alim Akhtar <alim.akhtar@samsung.com>
To: avri.altman@wdc.com, bvanassche@acm.org, robh@kernel.org,
martin.petersen@oracle.com, krzk+dt@kernel.org
Cc: sowon.na@samsung.com, peter.griffin@linaro.org,
linux-scsi@vger.kernel.org, devicetree@vger.kernel.org,
linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org,
Alim Akhtar <alim.akhtar@samsung.com>
Subject: [PATCH v2 3/4] scsi: ufs: exynos: add support for ExynosAutov920 SoC
Date: Fri, 17 Apr 2026 17:44:51 +0530 [thread overview]
Message-ID: <20260417121452.827054-4-alim.akhtar@samsung.com> (raw)
In-Reply-To: <20260417121452.827054-1-alim.akhtar@samsung.com>
From: Sowon Na <sowon.na@samsung.com>
Add a dedicated compatible and drv_data with associated hooks for
ExynosAutov920 SoC.
ExynosAutov920 has a different mask of UFS sharability
from ExynosAutov9, so add related changes for the same.
Signed-off-by: Sowon Na <sowon.na@samsung.com>
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
[Alim: fixed unintended changes, other fixes]
---
drivers/ufs/host/ufs-exynos.c | 110 ++++++++++++++++++++++++++++++++++
1 file changed, 110 insertions(+)
diff --git a/drivers/ufs/host/ufs-exynos.c b/drivers/ufs/host/ufs-exynos.c
index 77a6c8e44485..b2f65c465525 100644
--- a/drivers/ufs/host/ufs-exynos.c
+++ b/drivers/ufs/host/ufs-exynos.c
@@ -97,6 +97,10 @@
#define UFS_EXYNOSAUTO_RD_SHARABLE BIT(1)
#define UFS_EXYNOSAUTO_SHARABLE (UFS_EXYNOSAUTO_WR_SHARABLE | \
UFS_EXYNOSAUTO_RD_SHARABLE)
+#define UFS_EXYNOSAUTOV920_WR_SHARABLE BIT(3)
+#define UFS_EXYNOSAUTOV920_RD_SHARABLE BIT(2)
+#define UFS_EXYNOSAUTOV920_SHARABLE (UFS_EXYNOSAUTOV920_WR_SHARABLE |\
+ UFS_EXYNOSAUTOV920_RD_SHARABLE)
#define UFS_GS101_WR_SHARABLE BIT(1)
#define UFS_GS101_RD_SHARABLE BIT(0)
#define UFS_GS101_SHARABLE (UFS_GS101_WR_SHARABLE | \
@@ -417,6 +421,95 @@ static int exynos7_ufs_post_pwr_change(struct exynos_ufs *ufs,
return 0;
}
+static int exynosautov920_ufs_pre_link(struct exynos_ufs *ufs)
+{
+ struct ufs_hba *hba = ufs->hba;
+ int i;
+ u32 tx_line_reset_period, rx_line_reset_period;
+
+ rx_line_reset_period = (RX_LINE_RESET_TIME * ufs->mclk_rate)
+ / NSEC_PER_MSEC;
+ tx_line_reset_period = (TX_LINE_RESET_TIME * ufs->mclk_rate)
+ / NSEC_PER_MSEC;
+
+ unipro_writel(ufs, 0x5f, 0x44);
+
+ ufshcd_dme_set(hba, UIC_ARG_MIB(0x200), 0x40);
+ ufshcd_dme_set(hba, UIC_ARG_MIB(0x202), 0x02);
+
+ for_each_ufs_rx_lane(ufs, i) {
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(VND_RX_CLK_PRD, i),
+ DIV_ROUND_UP(NSEC_PER_SEC, ufs->mclk_rate));
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(VND_RX_CLK_PRD_EN, i), 0x0);
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(VND_RX_LINERESET_VALUE2, i),
+ (rx_line_reset_period >> 16) & 0xFF);
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(VND_RX_LINERESET_VALUE1, i),
+ (rx_line_reset_period >> 8) & 0xFF);
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(VND_RX_LINERESET_VALUE0, i),
+ (rx_line_reset_period) & 0xFF);
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x2f, i), 0x69);
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x84, i), 0x1);
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x25, i), 0xf6);
+ }
+
+ for_each_ufs_tx_lane(ufs, i) {
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(VND_TX_CLK_PRD, i),
+ DIV_ROUND_UP(NSEC_PER_SEC, ufs->mclk_rate));
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(VND_TX_CLK_PRD_EN, i),
+ 0x02);
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(VND_TX_LINERESET_PVALUE2, i),
+ (tx_line_reset_period >> 16) & 0xFF);
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(VND_TX_LINERESET_PVALUE1, i),
+ (tx_line_reset_period >> 8) & 0xFF);
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(VND_TX_LINERESET_PVALUE0, i),
+ (tx_line_reset_period) & 0xFF);
+
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x04, i), 0x1);
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x7f, i), 0x0);
+ }
+
+ ufshcd_dme_set(hba, UIC_ARG_MIB(0x200), 0x0);
+ ufshcd_dme_set(hba, UIC_ARG_MIB(PA_LOCAL_TX_LCC_ENABLE), 0x0);
+ ufshcd_dme_set(hba, UIC_ARG_MIB(0xa011), 0x8000);
+
+ return 0;
+}
+
+static int exynosautov920_ufs_post_link(struct exynos_ufs *ufs)
+{
+ struct ufs_hba *hba = ufs->hba;
+
+ ufshcd_dme_set(hba, UIC_ARG_MIB(0x9529), 0x1);
+ ufshcd_dme_set(hba, UIC_ARG_MIB(0x15a4), 0x3e8);
+ ufshcd_dme_set(hba, UIC_ARG_MIB(0x9529), 0x0);
+
+ return 0;
+}
+
+static int exynosautov920_ufs_pre_pwr_change(struct exynos_ufs *ufs,
+ struct ufs_pa_layer_attr *pwr)
+{
+ struct ufs_hba *hba = ufs->hba;
+
+ ufshcd_dme_set(hba, UIC_ARG_MIB(0x15d4), 0x1);
+
+ ufshcd_dme_set(hba, UIC_ARG_MIB(DL_FC0PROTTIMEOUTVAL), 8064);
+ ufshcd_dme_set(hba, UIC_ARG_MIB(DL_TC0REPLAYTIMEOUTVAL), 28224);
+ ufshcd_dme_set(hba, UIC_ARG_MIB(DL_AFC0REQTIMEOUTVAL), 20160);
+ ufshcd_dme_set(hba, UIC_ARG_MIB(PA_PWRMODEUSERDATA0), 12000);
+ ufshcd_dme_set(hba, UIC_ARG_MIB(PA_PWRMODEUSERDATA1), 32000);
+ ufshcd_dme_set(hba, UIC_ARG_MIB(PA_PWRMODEUSERDATA2), 16000);
+
+ unipro_writel(ufs, 8064, UNIPRO_DME_POWERMODE_REQ_LOCALL2TIMER0);
+ unipro_writel(ufs, 28224, UNIPRO_DME_POWERMODE_REQ_LOCALL2TIMER1);
+ unipro_writel(ufs, 20160, UNIPRO_DME_POWERMODE_REQ_LOCALL2TIMER2);
+ unipro_writel(ufs, 12000, UNIPRO_DME_POWERMODE_REQ_REMOTEL2TIMER0);
+ unipro_writel(ufs, 32000, UNIPRO_DME_POWERMODE_REQ_REMOTEL2TIMER1);
+ unipro_writel(ufs, 16000, UNIPRO_DME_POWERMODE_REQ_REMOTEL2TIMER2);
+
+ return 0;
+}
+
/*
* exynos_ufs_auto_ctrl_hcc - HCI core clock control by h/w
* Control should be disabled in the below cases
@@ -2201,6 +2294,21 @@ static const struct exynos_ufs_drv_data gs101_ufs_drvs = {
.suspend = gs101_ufs_suspend,
};
+static const struct exynos_ufs_drv_data exynosautov920_ufs_drvs = {
+ .uic_attr = &exynos7_uic_attr,
+ .quirks = UFSHCD_QUIRK_SKIP_DEF_UNIPRO_TIMEOUT_SETTING,
+ .opts = EXYNOS_UFS_OPT_BROKEN_AUTO_CLK_CTRL |
+ EXYNOS_UFS_OPT_SKIP_CONFIG_PHY_ATTR |
+ EXYNOS_UFS_OPT_BROKEN_RX_SEL_IDX |
+ EXYNOS_UFS_OPT_TIMER_TICK_SELECT,
+ .iocc_mask = UFS_EXYNOSAUTOV920_SHARABLE,
+ .drv_init = exynosauto_ufs_drv_init,
+ .post_hce_enable = exynosauto_ufs_post_hce_enable,
+ .pre_link = exynosautov920_ufs_pre_link,
+ .post_link = exynosautov920_ufs_post_link,
+ .pre_pwr_change = exynosautov920_ufs_pre_pwr_change,
+};
+
static const struct of_device_id exynos_ufs_of_match[] = {
{ .compatible = "google,gs101-ufs",
.data = &gs101_ufs_drvs },
@@ -2210,6 +2318,8 @@ static const struct of_device_id exynos_ufs_of_match[] = {
.data = &exynosauto_ufs_drvs },
{ .compatible = "samsung,exynosautov9-ufs-vh",
.data = &exynosauto_ufs_vh_drvs },
+ { .compatible = "samsung,exynosautov920-ufs",
+ .data = &exynosautov920_ufs_drvs },
{ .compatible = "tesla,fsd-ufs",
.data = &fsd_ufs_drvs },
{},
--
2.34.1
next prev parent reply other threads:[~2026-04-17 11:58 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CGME20260417115813epcas5p40234b872c221ce28981b17e42ca48139@epcas5p4.samsung.com>
2026-04-17 12:14 ` [PATCH v2 0/4] add ufs support for Exynosautov920 SoC Alim Akhtar
2026-04-17 12:14 ` [PATCH v2 1/4] arm64: dts: exynosautov920: Add syscon hsi2 node Alim Akhtar
2026-04-17 12:14 ` [PATCH v2 2/4] dt-bindings: ufs: exynos: add ExynosAutov920 compatible string Alim Akhtar
2026-04-17 12:02 ` Alim Akhtar
2026-04-17 12:55 ` Krzysztof Kozlowski
2026-04-24 9:52 ` Alim Akhtar
2026-04-17 12:14 ` Alim Akhtar [this message]
2026-04-17 12:14 ` [PATCH v2 4/4] arm64: dts: exynosautov920: enable support for ufs controller Alim Akhtar
2026-04-30 16:29 ` [PATCH v2 0/4] add ufs support for Exynosautov920 SoC Martin K. Petersen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260417121452.827054-4-alim.akhtar@samsung.com \
--to=alim.akhtar@samsung.com \
--cc=avri.altman@wdc.com \
--cc=bvanassche@acm.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=peter.griffin@linaro.org \
--cc=robh@kernel.org \
--cc=sowon.na@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox